Pers eksentrik kolom tunggal

MÜLLER EXPSV 10 HK

Kondisi: diremajakan ulang (bekas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Cedpfefmavxox Abhegn Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Required air pressure: 8 bar. More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50), as well as Schaal and Mabu presses.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Csdpfxefg E Hpe Abhegn Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baik (bekas), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping capacity: approx. 2000 m³/h Condition: Completely overhauled Cgsdpodnv D Sofx Abhen Warranty: 12 months (Picture similar)

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Cedjvuuaiopfx Abhegn Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Tahun pembuatan: 1991, Kondisi: baik (bekas), nomor mesin/kendaraan: 07282, Offer 22336 Cjdpfxjmdqllo Abhogn Technical Data: - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm - Max. sheet thickness with pre-bending: 3 mm - 3 driven rollers - Roller diameter, top / bottom: 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space (approx.): W 5500 x D 1400 x H 1300 mm - Weight (approx.): 4.7 t - With pre-bending function - Rear roller adjustable at an angle - Swing-out bearing for top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details. Cedpfskvnumjx Abhegn

Kondisi: baik (bekas), 1 x drilling and tapping machine Cedpfx Abeipyiwjhogn Wörner BG 16 with pneumatic feed (manual drilling also possible) coolant system Technical data: Spindle speeds: 95 - 3,500 rpm (24 steps via V-belt, 2 via motor) Spindle taper: MT 2 Drilling capacity in steel: 16 mm Tapping capacity in steel: M 8 The machine can be inspected under power.

Kondisi: baik (bekas), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Supplied with cubing block. Maximum drilling diameter in solid cast iron 20-22: 100 mm Maximum drilling diameter in solid steel R=60: 80 mm Spindle sleeve diameter (sliding): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18 to 1,600 Automatic feeds Maximum arm reach (from column edge to spindle axis): 2,230 mm Drilling radius (min – max): 660 to 2,505 mm Cjdpsikqz Sjfx Abhogn Head travel on arm: 1,845 mm Vertical arm travel: 1,040 mm Column diameter: 550 mm Column height with motor: 3,720 mm Base plate height: 260 mm Base working surface: 2,490 x 1,230 mm Spindle motor power: 11 HP Weight: 9,000 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Sving över bädd: 1290 mm Sving över plansup: 910 mm Sving i urtag (l:500 mm): 1580 mm Avstånd mellan spetsar: 6000 mm Codpjwc Nzpofx Abhogn Spindelgenomgång: 155 mm Spindelvarvtal: 6–800 varv/min Spindelnos: ASA A2 11" Arbetsstycke mellan spetsar: 20 ton Kon i bakdocka: Mk6 Längdmatarhastighet: 0,045–5 mm/varv Tvärmatning: 0,0220–1,5 mm/varv Gängor metrisk: 0,5–56 Gängor modul: 0,25–28 Gängor Whitworth: 1/2–84/" Spindelmotor: 30 hk Tillverkningsår: 1971 Längd: 9500 mm Bredd: 2000 mm Höjd: 1600 mm Vikt: 13 400 kg Sony digitalavläsning plansup 3 st. fasta dubbar Planskiva 4-backig chuck Härdade gejdrar Kraftmatning på överstock

Kondisi: baik (bekas),