SERAT LASER cutting mesin
Bodor A-T

Tahun pembuatan

2025

Kondisi

Baru

Lokasi

Brașov

Data mesin

Nama mesin:: SERAT LASER cutting mesin

Model:: Bodor A-T

Tahun pembuatan:: 2025

Kondisi:: baru

Harga & Lokasi

Lokasi:: Brașov, Romania

Hubungi

Rincian penawaran

ID iklan:: A6034732

Pembaruan:: terakhir pada 24.06.2026

Deskripsi

Arbeitsbereich: 6100 mm x 1524 mm / 4000 mm x 1524 mm / 3048 mm x 1524 mm
Laserleistung: 3000 W / 2000 W / 1500 W / 1000 W
Positioniergenauigkeit: ±0,05 mm
Wiederholgenauigkeit: ±0,03 mm
Max. Verfahrgeschwindigkeit: 91 m/min
Max. Beschleunigung: 1G

1. Gestreckter Aluminiumträger
Luftfahrtlegierung mit erhöhter Steifigkeit reduziert deutlich Verformungen des Trägers bei Hochgeschwindigkeitsbetrieb und verbessert die Richtungsstabilität sowie die Bearbeitungseffizienz bei hohen Geschwindigkeiten.

2. Maschinenbett mit Zapfen-und-Mortise-Platten-Schweißkonstruktion
Chinesische traditionelle Zapfen-und-Mortise-Struktur sorgt für erhöhte Tragfähigkeit. Durch Schweißnaht-Fixierung und strukturelle Belastung wird eine dauerhafte Betriebsstabilität gewährleistet.
Die geschweißte Konstruktion bietet eine verbesserte Schwingungsdämpfung, reduziert Abweichungen durch Vibrationen und ermöglicht präzisere Schnittergebnisse.

3. Doppelte, elektrisch betätigte und automatische zentrierende Spannfutter
Doppelte elektrische Spannfutter mit automatischer Zentrierfunktion ermöglichen eine einfache Bedienung und erfordern nur minimalen Wartungsaufwand. Ein neuer Motor sorgt für präzise Steuerung. Modulbauweise der Spannfutter-Komponenten, eigenständig entwickelt und schnell austauschbar.

4. Automatische Fokussierung des Laserkopfs
Durch separate Einstellung der Perforations- und Schneidfokushöhe wird eine präzisere Schnittqualität erzielt.
Geeignet für mehrere Fokuslängen; die Fokusposition passt sich automatisch der Blechdicke an.

Rcjdpfx Aog Eglpen Iof
5. Niederdruck-Gasalarmfunktion
Echtzeit-Gasdrucküberwachung und automatische Störungsmeldung gewährleisten Schnittqualität und Präzision und erinnern den Bediener rechtzeitig an einen Gaswechsel.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2021

100 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+86 531 8... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin Press Tekuk Hibrida 4100 x 220 Ton MVD HC SERIES

Concordia Sagittaria

10.941 km

Mesin Press Tekuk Hibrida 4100 x 220 Ton
MVDHC SERIES

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 200 mm/dtk, kedalaman tenggorokan: 410 mm, kapasitas tangki oli: 220 l, jarak pergerakan sumbu X: 750 mm, produsen pengendali: ESA, model controller: S 875W, lebar kerja: 4.100 mm, gaya tekuk (maks.): 220 t, penahan belakang: 750 mm, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jumlah lengan penopang: 2, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 8, jenis mahkota: dikendalikan CNC, Pressa Piegatrice Hybrid MVD 4100 x 220 Ton Seri HC CNC ESA S 875W 21″ *dxf siap 3D Jumlah sumbu: 8 (Y1-Y2-X-R-Z1-Z2-X5 kerucut-A1) Meja kompensasi otomatis WILA Dsp Laser Pita optik presisi 0,01 mm GIVI MISURE Backgauge UNIMEC Pengikat alat atas tipe Promecam Rolleri H = 150 mm Matriks multi-cavity sepanjang keseluruhan Daya tekan: 220 ton Panjang tekuk: 4100 mm Jarak antar penyangga: 3600 mm Throat depth: 410 mm Rcjdox N Rxcepfx An Ief Jarak Meja – Punch (“Cahaya”): 515 mm Tinggi meja kerja: 965 mm Langkah sumbu Y: 310 mm Kecepatan turun sumbu Y: 200 mm/s Kecepatan kerja sumbu Y: 0-10 mm/s Kecepatan kembali sumbu Y: 200 mm/s Langkah sumbu X backgauge: 750 mm Daya: 18,5 kW Dimensi (P x L x T): 5600 x 2200 x 3040 mm Berat sekitar: 13.700 kg

Lihat detail

Iklan kecil

Mesin pemotong laser CNC TRUMPF TruLaser 5030 fiber L41 (3 kW)

Jerman

11.023 km

Mesin pemotong laser CNC
TRUMPFTruLaser 5030 fiber L41 (3 kW)

Hubungi

Iklan kecil

Suffolk

11.643 km

Mesin pengisi kantong
Toyo JidokiTT-8

Hubungi

Iklan kecil

Saerbeck

11.191 km

Pusat mesin
WeekeBHX 500

€45.000

Harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Rcsdpfsh E Sghox An Isf Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Spindle speed: 18,000 rpm Dismantled – immediately available

Lihat detail

Iklan kecil

Mesin tekuk tabung, mesin tekuk mandrel Jutec Biegesysteme GmbH & Co. KG Biegesystem KBV

Limburg an der Lahn

11.204 km

Mesin tekuk tabung, mesin tekuk mandrel
Jutec Biegesysteme GmbH & Co. KGBiegesystem KBV

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: Rcedpfx Ajng Amksn Ijf • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Lihat detail

Iklan kecil

Roller track / sistem berhenti WMT LA 6000

Velen

11.246 km

Roller track / sistem berhenti
WMTLA 6000

Hubungi

Kondisi: baru, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of holders: 7 Material: Tube, stainless steel Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit kit for existing roller conveyors in lengths from 2 to 6 meters. The guide rail is made from rectangular tubing, 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. A magnifier with 6x magnification assists with precise adjustment of the desired length. Rcjdpfx Anefv Atle Ief Note: This offer is for the stop system only – roller conveyor not included!

Lihat detail

Iklan kecil

Tekan alat rem Cnstamp Hemming tool for Lvd/Trumpf

Nanjing

3.648 km

Tekan alat rem
CnstampHemming tool for Lvd/Trumpf

Hubungi

Iklan kecil

Mesin pengukur koordinat CNC Mitutoyo Crysta Apex C 7106

Jerman

11.023 km

Mesin pengukur koordinat CNC
MitutoyoCrysta Apex C 7106

Hubungi

Iklan kecil

Mesin Pemotong Laser Serat Lembaran & Tabung Bodor C-T

Milan

11.226 km

Mesin Pemotong Laser Serat Lembaran & Tabung
Bodor C-T

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, C3T model: Working area: 3048mm x 1524mm Laser output power: 6000W / 3000W / 2000W / 1500W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double High-Speed Exchange Tables Rcedog D Nz Repfx An Ief The fast exchange of two tables significantly increases efficiency. The chain-driven system offers greater rigidity and higher accuracy, saving feeding time. 2. Tenon-and-Mortise Welded Bed Frame Utilizes traditional Chinese tenon-and-mortise structure to enhance load-bearing capacity. Welded joints and the structural support ensure long-term operational stability. The welded frame improves vibration absorption, reducing deviations caused by impacts and enabling more precise cutting. 3. Dual Automatic Self-Centering Electric Chucks The dual electric chucks with automatic self-centering function are easy to operate and low-maintenance. The brand-new motor provides precise control. Independently developed modular chuck components can be quickly replaced. 4. Auto-Focus Laser Cutting Head By setting separate focal lengths for piercing and cutting, cutting precision is improved. Suitable for various focal lengths, with the focal position automatically adjusted according to the thickness of different sheets. 5. Extended Aluminum Beam Aerospace-grade material with increased rigidity greatly reduces beam deformation during high-speed operation, improving high-speed directional sensitivity and processing efficiency.

Lihat detail

Iklan kecil

Čakovec

10.655 km

Tekan rem
GaspariniPBS 105/3000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 0304/5599, Fungsionalitas: berfungsi sepenuhnya, produsen pengendali: Delem, model controller: DA-65, lebar kerja: 3.000 mm, gaya tekuk (maks.): 105 t, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jumlah sumbu: 4, jenis mahkota: dikendalikan CNC, jenis aktuasi: hidrolik, Perlengkapan: Penandaan CE, dokumentasi / manual, sistem penjepitan alat Eropa, Crowning: Reflex - ACSG1 Daya terpasang: 11 kW Peralatan: Bisa sesuai kesepakatan. PENAHAN ALAT ATAS BARU. Redpfxjxv Eafj An Iocf Servis terakhir: 05/2025.

Lihat detail

Beriklan di sini

SERAT LASER cutting mesin Bodor A-T

Data mesin

Harga & Lokasi

Rincian penawaran

Deskripsi

Penyedia

Kirim permintaan

Telepon & Faks

SERAT LASER cutting mesin
Bodor A-T