Rak kantilever, satu sisi, tinggi 2,60m, lengan 1m

feuerverzinkt

Kondisi: baru, berat kosong: 2.520 kg, berat muatan maksimum: 7.980 kg, berat keseluruhan: 10.500 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 5.500 mm, lebar ruang muat: 2.000 mm, suspensi: baja, ukuran ban: 235 / 75 R 17,5, jarak roda: 990 mm, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235 / 75 R 17,5, ukuran ban belakang: 235 / 75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 4.428 h, 002 Bsdswnidhopfx Anxedc

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Bdodpoddmq Tefx Anxsc Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, 1 racking unit with 4 uprights €2,120 (net)! Bedpfx Asddmqnenxodc Surcharge for cantilever arms with guardrails for this rack: €40 Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional frames (or by using different bay widths), this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright, approx. 3,500 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity with a load center of 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per storage level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, center distance = 1,300 mm; standard is 1.30 m. Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a length of 1.50 m onwards, a small surcharge applies to the stated price! Special dimensions (other bay widths) are available on request, but will also incur a surcharge and have a longer delivery time as they must be made to order! If you do not specify a different bay width, we will deliver the rack with a bay width of 1.30 m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany via parcel service directly from Würth), excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) are available! Please contact us!

Kondisi: baik (bekas), de-hu-01 Bjdpfxod Duc Te Anxedc

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Bjdpfx Anoddmtcoxsdc Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 Bsdpfxjddmtqj Anxsdc - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Trafo hermetik minyak 2000 kVA, SGB, th. 2016, 11kV ±2x2,5%/400V, konektor tegangan tinggi, perlindungan hermetik penuh, roda, protokol pengujian Bodjxvqp Sjpfx Anxsdc

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors. Bdjdpfjddmr Njx Anxsc

Tahun pembuatan: 2021, Kondisi: baru, en-Kragarm rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW - : Price ex works incl. loading! Bodpfoddmqyox Anxjdc 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or adding additional frames (or by varying the bay spacing); this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: • 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 Each with 2 x 3 adjustable arms, 1.20 m, load capacity 860kg per arm With bracing approx. 1.30 m • Upright, double-sided approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable arms per side Load capacity at load center 600 mm: 860kg per arm / 2,600kg per upright side Including longitudinal and diagonal braces, bay spacing = 1,300mm, standard is 1.30m. • Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! • Special sizes (other bay spacings) are also available on request, but are subject to an extra charge and longer delivery time as these are custom manufactured! If you do not specify a different bay spacing, we will deliver the racking with a bay spacing of 1.30m. In this case, the length with a racking row of 4 uprights (3 bays) is approx. 4m. • Supplied with all bolts and nuts (shipped within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Photos shown are of a similar rack!

Kondisi: baru, Tahun pembuatan: 2025, Roller diameter: 640 mm Throat depth: 620 mm Cutting depth: 400 mm Tilting table: yes, -0° to +15° Table size: 870 x 620 mm Band speed: 1660 m/min Motor power: 2.2 kW / 400 V Motor brake: yes / automatic Bodpfegtdpmex Anxodc Extraction port: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 4.16m high, 1.20m arms, 750kg per arm – New –: Price ex works, including loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or adding uprights, or by varying the bay spacing. The example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Uprights: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity with load centre 600 mm: 750 kg per arm / 2250 kg per upright For 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces e = 1300 mm, standard is 1.3m – unless otherwise specified, we will supply the racking with a bay spacing of 1.3m. Other spacings possible (e.g. 1m, 1.25m) also available at a small surcharge: 1.5m or custom dimensions! Standard delivery length for one row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us! Bdodpjddmp Uofx Anxjc

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Bjdpfjddmp Asx Anxedc Price ex works, including loading! 1 racking unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can of course build longer or shorter racking units by omitting or purchasing additional frames (or by using varying axle spacings). This example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system comprising: - Single-sided racking uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity per arm (load center 600 mm): 750 kg / per upright 2,250 kg - With 4 uprights per level: 4 x 750 kg = 3,000 kg; arms IPE 100 - Supplied with longitudinal and diagonal bracing, c/c spacing 1,300 mm (standard is 1.30 m); if no other specification is given, racks will be delivered with 1.30 m axle spacing. Other spacings possible, e.g., 1 m, 1.25 m, or 1.50 m for a small surcharge, or custom measurements. - Standard overall length for a single row with 4 uprights is approx. 4,000 mm. - Delivery includes all bolts and nuts, but excludes floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us for advice!

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 50 l, warna: merah, berat keseluruhan: 2.600 kg, berat kosong: 2.500 kg, daya angkat: 1.000 kg/m, tinggi angkat: 3.310 mm, kondisi ban: 100 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, volume sekop: 0,4 m³, lebar bucket penggalian: 160 mm, Tahun pembuatan: 2025, kapasitas angkut: 980 kg, Perlengkapan: boom yang dapat disesuaikan, garpu palet, hidrolik, kabin, kopling trailer, kunci diferensial, lampu depan tambahan, pelindung kepala, penggerak semua roda, sekop standar, The H&R 2210-T telescopic loader is equipped with the new 3-cylinder Perkins turbo engine, offering 18.5 kW (built in Mannheim, Germany), which meets the Euro 5 standard even without a diesel particulate filter. Bdedpfx Aeul Af Dsnxoc The new turbo engine is exceptionally economical, and with the 2-stage hydrostatic drive, it achieves a top speed of approx. 16 km/h. Thanks to its generous steering angle of 42° and tight turning radius, it is highly maneuverable even in confined spaces. The 2210T wheel loader with telescopic boom comes standard with a quick-attach pallet fork and a standard bucket, allowing you to start work immediately. The additional hydraulic circuit enables the use of various attachments for the farm loader. The telescopic arm gives the 2210-T excellent reach. The electronic gear control (E-Gang) on the joystick makes operation particularly comfortable. H&R loaders are thoroughly optimized both technically and visually at our facility and undergo comprehensive quality checks. In addition, each machine receives extensive corrosion protection treatment. Our loaders are CE-compliant in accordance with the EU Machinery Directive. TUV Süd certification for individual operating approval in accordance with §21 StVZO (road approval / operating permit as self-propelled work machine) is available for our machines. Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cabin • Incl. pallet fork • Incl. standard bucket 150 cm • Joystick with float position and E-Gear • Auxiliary hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Rear-view camera with display • Rotating beacon • LED work lights front & rear • Wide tyres 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE-compliant to EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional: 2-year warranty: €590.00 TÜV road approval / operating permit as workplace machine: €595.00 Transport within Germany & Austria upon request Technical Specifications Engine: 3-cylinder Perkins turbo Power: 25 hp Emission class: Euro 5 Lifting capacity: 980 kg Lift height: 3310 mm (underside of standard pallet fork) Dumping height: 2796 mm (underside of standard bucket tipped) Lift / Lower time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tyres: 31 x 15.5 - 15 Accessories and spare parts available from us. When making inquiries, please provide your phone number!

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright Bodpsddmpvofx Anxodc With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us!