Kompresor sekrup COMPAIR LS 11, 11 kw

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00316, Tahun pembuatan: 2019, jam operasional: 6.820 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Hedpfx Aheyiaxzewsi Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Smallest pivot point: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,820 h EQUIPMENT UVV 04/26 Charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panorama roof Digital / display Interior rearview mirror Operating manual Note: The upholstery is worn.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) Hedporz Nflofx Ahwoi - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 18.183 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15035709304, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, sudut putar sumbu B (maks.): 180 °, sudut putar poros C (maks.): 360 °, The machine will remain powered until 06/03/2026. TECHNICAL DETAILS Hodpfx Aoymmpdjhwoi Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 520 mm C-axis: ±360° B-axis: 180° Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary Table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input and display unit: 0.001° Max. tool length from spindle nose: 315 mm Max. tool weight (with automatic tool change): 6 kg MACHINE DETAILS Control: Siemens 840D ShopMill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight with base: 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor High-pressure coolant system (IKZ) with 70 bar Blum TC50 spindle probe

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00299, Tahun pembuatan: 2019, jam operasional: 6.310 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, tipe tiang: dupleks, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Working aisle width for pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width for pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height above protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Hsdpfoyia Dksx Ahwoi Height above protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,310 h EQUIPMENT UVV 05/26 Charger Sideshift Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panorama roof Digital display Interior mirror Operating manual

Kondisi: siap digunakan (bekas), Max. operating overpressure: 11 bar, motor speed: 2,945 rpm, rated power: 30 kW, operating hours: 67,212 h. Hsdpfx Ael Eyq Rshwei

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 511903V00414, Tahun pembuatan: 2019, jam operasional: 6.292 h, kapasitas angkut: 1.700 kg, tinggi angkat: 5.750 mm, pengangkatan bebas: 1.880 mm, tipe tiang: dupleks, DETAIL TEKNIS Kapasitas angkat: 1.700 kg Titik berat beban: 600 mm Jarak beban: 410 mm Jarak sumbu roda: 1.453 mm Free lift: 1.880 mm Ketinggian angkat: 5.750 mm Dimensi garpu: 50 / 100 / 1.150 mm Lebar penahan garpu: 760 mm Jarak luar antar garpu min./maks.: 316 / 620 mm Hedpfxjyh Eppj Ahwoi DETAIL MESIN Dimensi & Bobot Dimensi (P x L x T): 2.412 x 1.270 x 2.900 mm Berat: 3.470 kg Panjang termasuk sandaran garpu: 1.262 mm Tinggi tiang angkat saat diperpanjang: 6.320 mm Tinggi atap pelindung: 2.200 mm Tinggi kursi: 1.140 mm Tinggi lengan roda: 308 mm Tegangan / Kapasitas baterai: 48 V / 620 Ah Tipe tiang: Duplex (dapat digeser samping) Jam operasional: sekitar 6.292 jam PERLENGKAPAN Pengisi daya Blue Spot belakang Manual pengoperasian UVV: 06/26

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: UWID/5000/97, kecepatan spindle penggilingan: 10.000 rpm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 20 m/menit, tinggi pusat: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed Rate X-axis: 0 - 20 m/min Feed Rate Y-axis: 0 - 10 m/min Feed Rate Z-axis: 0 - 20 m/min Centre Height: 150 mm Usable Table Area: 980 x 185 mm Grinding Head Swivel Range: 240° Rotation Speed: 120°/s Spindle Diameter: 170 mm Spindle Speeds: 2,000 – 10,000 rpm Workpiece Carrier A-Axis Hjdpfxsyh I U Ie Ahwei Indexing Accuracy: ± 15″ Cumulative Indexing Error (at ∅ 100 mm): 8 µm Mounting: ISO 50 Max. Rotational Speed: 50 rpm Position Measuring System Resolution: 0.0001 mm or 0.0001° Tool Magazine Capacity: 70 tools MACHINE DETAILS Control System: NUM 1050 M with PC; Program Memory: 512 KB Drive Ratings Grinding Spindle Motor: 10 kW Table Drive X-axis: 1.5 kW Workpiece Carrier A-axis: 1.5 kW Cross Slide Z-axis: 1.5 kW Grinding Head Column Y-axis: 3 kW Grinding Head Swivel B-axis: 3 kW Electrical Connection Connected Load: 23 kW Main Fuse: 63 A Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Lighting Voltage: 230 V, 50 Hz Compressed Air Air Consumption: 10-12 Nm³/h Min/Max Pressure: 5/8 bar (500/800 kPa) Compressed Air Quality: ISO 8573-1, Class 4 Ambient Temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Hjdpfxeu Rptye Ahwoi Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, panjang penggilingan: 3.150 mm, lebar penggilingan: 800 mm, beban meja: 6.000 kg, daya motor spindle penggiling: 22.000 W, tinggi benda kerja (maks.): 650 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Panjang penggerindaan: 3.150 mm Lebar penggerindaan: 800 mm Ketinggian benda kerja maks.: 650 mm Ukuran bidang meja: 3.150 x 600 mm Ukuran pelat magnet: 3.000 x 600 mm Ukuran batu gerinda: 450 x 100 x 127 mm Daya dukung meja maks.: 6 t DETAIL MESIN Hedpfx Asylk E Hohwoi Kontrol: SIEMENS 840D Total kebutuhan daya: 70,6 kW Daya motor spindle: 22 kW Dimensi & Berat Ruang yang dibutuhkan: sekitar 11 x 3 x 2,4 m Berat mesin: sekitar 15 t PERLENGKAPAN Unit pendingin 2.500 l Pengaturan daya magnet Sistem penyeimbang semi-otomatis Catatan: Kontrol dapat menyala, tetapi perangkat lunak penggilingan MININI tidak memuat karena alasan yang tidak diketahui. Perangkat keras kontrol telah diperiksa dan dalam kondisi baik. File cadangan tersedia.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H-H20140, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, kecepatan rotasi (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 24, DETAIL TEKNIS Perjalanan sumbu X: 610 mm Hodpfx Ahoylk Eyjwei Perjalanan sumbu Y: 510 mm Perjalanan sumbu Z: 610 mm Ukuran meja: 760 mm x 510 mm Sistem: SK40 Kecepatan putar: 15.000 rpm DETAIL MESIN Berat mesin: 4.700 kg Kontrol: Ultimax PERLENGKAPAN Penukar alat 24 posisi Pendingin internal (IKZ) Konveyor serbuk Handwheel elektronik

Tahun pembuatan: 1999, Kondisi: bekas, Drehbankzubehör_ja_VDI20_Paket_3 Hedpfxehr Sv Tj Ahwoi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 286.001.911.20, lebar kerja: 3.000 mm, panjang kerja: 6.000 mm, model controller: Global Control S mit 15 Zoll Farb-Touchscreen, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of oxy-fuel torches: 2 Gas flow control: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA PLEASE NOTE: The Zinser cutting bed is NOT included in the scope of delivery! EQUIPMENT as per original invoice – specifications without guarantee - Joystick and handwheel for Global Control S panel - Cooling system for the control cabinet - Laser diode - Heat shield without air cooling - Track for double-sided longitudinal drive HEB 9 m Hedeyi Ub Hspfx Ahwsi - OmniFlow oxy-fuel supply up to 70 m³/h - ALFA machine cutting torch with internal ignition - SmartLifter 200 - SensoMat ARKI - Full gas addressing - Light barriers - Safety device: foot switch for wheel housing - Energy supply via energy chain, oxy-fuel 9 m - Drag arm for energy chain Further manufacturer’s technical data – information without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00315, Tahun pembuatan: 2019, jam operasional: 6.239 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, tipe tiang: dupleks, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Hsdpfjyia Hfox Ahwsi Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length including fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance centre of wheelbase: 114 mm Working aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight including battery: 3,125 kg Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,239 h EQUIPMENT UVV 04/26 Charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front windscreen with wiper Panorama roof Digital / display Interior mirror Operating manual Note: The upholstery is worn.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 87.000 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 775 kg, panjang total: 1.770 mm, lebar total: 900 mm, tinggi total: 1.530 mm, jenis bahan bakar: listrik, laju aliran volumetrik: 190 m³/jam, tekanan kerja: 8 batang, tekanan (maks.): 10 batang, tingkat kebisingan: 68 dB, jenis pendinginan: udara, Perlengkapan: pengering pendingin, Manufacturer: Kaeser ASD 32T Screw Compressor + Refrigeration Dryer Regularly maintained!!! Complete documentation Year of manufacture: 2008 Hodpfei E H Ikjx Ahwsi Rated pressure: 8 bar Air flow: 3.16 m³/min Air flow: 189.6 m³/hour Operating hours: 87,000 Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400 V/3 PH, 36 A Power: 18.5 kW Motor speed: 2,945 rpm Ambient temperature: 3 / 45°C Machine weight: 745 kg Machine dimensions: 1,770 x 900 x 1,530 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang total: 90.000 mm, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 4.000 mm, panjang meja: 4.000 mm, lebar meja: 2.600 mm, en Hedpfx Ajyk S Uyjhwji