Belt Conveyor Kleemann

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, daya: 389,81 kW (529,99 hp), Instalasi penghancur mobile DOPPSTADT AK 560 Eco Power Mesin diesel: 530 HP Keranjang penghancur halus (lubang sesuai kesepakatan) Njdpew Rz Rqofx Aahjlk Konveyor keluar belakang dengan rol magnet Twin drive (penggerak terpisah untuk dasar geser dan rol pengumpan) Penggerak hidrolik (mode pelan) Remote control

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Nlodpfevwlqqex Aahek Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: siap digunakan (bekas), An air-conditioned Aztech office and commercial container is available. Thermal transmittance (U-value): approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation is available. On-site inspection is possible. Nlodpfew D Eubox Aahek

Tahun pembuatan: 2004, Kondisi: baik (bekas), Manufacturer: Hein Lehmann Dimensions: 2,000 mm x 6,300 mm Decks: 1 Year of manufacture: 2004 Nodpfoh Ty Tqsx Aahjlk Supplied with frame.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, Nlsdpfx Ajvgrh Uoahjk We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Kondisi: bekas, Tahun pembuatan: 2012, daya: 264 kW (358,94 hp), Stationary shredding plant M & J 4000S. Electric drive: 2x 132 kW 400 V AC, 50 Hz Including base frame, hydraulic unit, and control cabinet. Nlodpeu Dkf Defx Aahek

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 9.237 h, Perlengkapan: penggerak semua roda,

Kondisi: bekas, jam operasional: 20 h,

Kondisi: baik (bekas), Manufacturer: Främbs & Freudenberg Model: 2000-6000-2 Deck Size: 2,000 x 6,000 mm Number of Decks: 2 Nledpfog Snvbsx Aahek Included: – Electric motor – Cardan shaft – Springs The screening machine can be sandblasted and painted.

Tahun pembuatan: 2025, Kondisi: baru, Description:  Screening deck system consisting of 1 deck for screening waste wood or wood chips  Input material: 0-200 mm  Throughput capacity approx. 80 m³/h (depending on material)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer’s own impact walls or subframe Nlsdpfxog I Uqfj Aahok Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o Outer dimensions: Length = 5,500 mm; Width = 1,850 mm o Screening area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW gear motors o Screening body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and low-cost adaptation to other grain sizes possible) o Bearing lubrication external, optional centralized lubrication available at extra cost