Tekan membran

Kondisi: sangat baik (bekas), MEMBRANE PRESS Bdedpfxjrwxz Rj Aatsk For coating MDF-shaped panels with PVC, PP, and PET with VARIOPIN fully automatic substructure system Automatic front loading/unloading and preparation table (double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions mm: 1500 x 2800 mm Usable working dimensions mm: 1250 (or 2 x 600) x 2550 Front loading side from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programmer) SIEMENS SIMATIC Panel Touch Installed total power approx. 50 KW OPTION "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Kondisi: bekas, Number of spindles: 6 units Working width: 240 mm Planing height: 200 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- Machine has been cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Bedpfx Aevnv Uzeatedk Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air-cushion lubrication system in the work table 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 and 3 Working height increased to 200 mm instead of 120 mm 5 x electronic horizontal positioning (positions 2–3–4–5–6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning (positions 2–3–5–6) 3 x electronic tool diameter setup (positions 3–4–5) Mobile 10 control PRL equipment for cutting out the glazing bead on the 2nd upper horizontal spindle Machine is supplied without tooling (All technical data as per manufacturer – no guarantee!)

Kondisi: baru, Tahun pembuatan: 2021, Bernardo AKPL 1600 x 40 Press Brake Bsdpfoftuywox Aatjdk Technical Specifications: - Press force: 40 t - Bending length: 1600 mm - Distance between uprights: 1200 mm - Stroke length: 100 mm - Backgauge range: 0 – 500 mm - Throat depth: 200 mm - Table width: 150 mm - Table height: 760 mm - Approach speed: 60 mm/sec - Bending speed: 8 mm/sec - Return speed: 60 mm/sec - Oil tank capacity: 130 litres - Motor power: 4.0 kW - Width: 2050 mm - Depth: 1800 mm - Height: 2030 mm - Weight: approx. 3030 kg

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING Bdodpfxormucxe Aatjk - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Bjdpfx Aed N H A Neatedk Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: baru, Press force 40 t Bending length 1270 mm Clearance between uprights 980 mm Bjdpegiud Hjfx Aatjdk Throat depth 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / Special Features: • Manual operation for motorized depth adjustment and backgauge o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, max. load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Only one working speed 10 mm/s for all vertical movements — no light barrier required! • Front support arms • Pendant control panel • Paint: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2–3 months after receipt of order plus pre-shipping costs China – Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund-Wambel

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 164 h, lebar kerja: 3.100 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 75 mm/dtk, berat keseluruhan: 10.500 kg, panjang total: 4.500 mm, lebar total: 1.700 mm, tinggi total: 2.500 mm, tegangan masuk: 380 V, gaya penekanan: 200 t, daya motor servo: 15 W, Mit Bedienungsanleitung, Teileliste und sämtlichen verfügbaren technischen Unterlagen. Bdsdpfx Aovm Elasatek

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Bdsdot R T Hcepfx Aatjk

Kondisi: bekas, Bending length: 3100 mm Bedpsru Unbofx Aatodk Pressing force: 80 t Motor power: 5.5 kW

Kondisi: sangat baik (bekas), Tahun produksi: 1991 Model: ITPS III Nomor seri: ITPS 80C 25 P1C226 Gaya tekan maksimum: 1800 kN Langkah kerja: 115 mm Daya listrik: 415 V, 50 Hz, 3 fasa Arus nominal: 119 A Daya terpasang: 18,5 kW Berat mesin: 4940 kg Nomor inventaris: 9.14 Kontrol: Delem DA-65R Mesin dapat dinyalakan, namun kontrol tidak merespons perintah. Bdodpfx Aajwq Dpqjtsk Pengguna sebelumnya telah mengganti kontrol AMADA asli dengan DELEM.