Hefewanne

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 1.437 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 137949-100, gaya penjepit: 2.100 kN, diameter sekrup: 65 mm, volume langkah: 913 cm³, tekanan injeksi: 1.600 batang, berat keseluruhan: 10.500 kg, model controller: UNILOG B8, The machine was serviced by the manufacturer in 2021 and upgraded to the latest specifications! It has not been used since and is therefore in excellent condition! The machine is offered including 2 Kistler modules for cavity pressure switching! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Clear tie bar distance (H x V): 670 x 620 mm Mould installation height: 350 mm Platen spacing: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Calculated shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free injection volume: 419 cm³/s Cylinder heating power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 litres Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooler switch-on temperature (HLP 32): 35 °C Oil cooler switch-on temperature (HLP 46): 45 °C Electrics Drive power, hydraulic pump: 37 kW Lhedoyi Ailjpfx Ac Hsc Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 – 1.5 m³/h Max. cooling water inlet temperature: 35 °C Cooling water return pressure: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure switching, range 1: 20,000 pC Kistler module for cavity pressure switching, range 2: 10,000 pC

Kondisi: bekas, Fungsionalitas: tidak berfungsi, Tahun pembuatan: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the rear ramp of the vehicles, which allowed the military to transport a truck or other military equipment. The XV following LARC indicates the maximum transportable weight: 15 tonnes. The vehicles are constructed from aluminium and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each producing 300 hp. This enabled the vehicles to achieve a top speed of 48 km/h on land and 9.5 knots on water, which is approximately 18 km/h. Ledpfx Ajxcgy Hoc Hehc The unladen weight of the vehicle is 22 tonnes. The maximum permissible weight is 35.5 tonnes. The previous owner intended to convert the boats to a fully electric drive system to organise sightseeing tours on the Wadden Sea. Approximately €200,000 was invested, however the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H2X396F51535, Tahun pembuatan: 2015, jam operasional: 6.533 h, kapasitas angkut: 8.000 kg, tinggi angkat: 3.500 mm, tipe tiang: dupleks, daya: 72 kW (97,89 hp), berat kosong: 16.230 kg, RINCIAN TEKNIS Kapasitas angkat: 8.000 kg Tinggi angkat: 3.500 mm Ljdjyifkpjpfx Ac Hohc RINCIAN MESIN Tipe tiang: Duplex Daya: 72 kW Berat bersih: 16.230 kg Dimensi: 380x230x325 cm (T) Jam operasional: 6.533 jam PERLENGKAPAN Ban karet padat

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 0-201-22-3325, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 5.800 mm, lebar benda kerja (maks.): 1.200 mm, model controller: Homatic-CNC System PC83 mit Windows NT 4.0, kecepatan pemakanan sumbu X: 80 m/menit, kecepatan spindel (maks.): 18.000 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to timely collection on 20/03/2026! 4-axis CNC machining centre for drilling, milling, edge banding, and finishing: Saw and crosscut unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush-trimming and finishing unit for tool changer Blow-off nozzle for workpiece edge for tool changer Note: Besides the units listed above, no vacuum suction cups, tools, or tool holders potentially shown in the images are included in the delivery! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for mounting vacuum suction cups with longitudinal and lateral stops, 4-fold occupancy Max. workpiece length (single setup): 5,800 mm Max. workpiece length (pendulum operation): 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when extraction hood in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when extraction hood in position 2) Aggregate configuration Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position rotary tool changer) Lhodpfx Acjyic Tue Hec Separate Y-axis for 2nd main spindle and aggregate interface with integrated pneumatics and electrics Electronic power supply and swivel drive C-axis, unlimited swivel range Edge banding unit, 360°, for insertion into the right main spindle Max. edge height: 65 mm Pickup location on the right for edge banding part Prefeeder station and 3-position roller magazine Adapter units: Combined flush/radius trimming and finishing unit (profile scraper) Saw and crosscut unit Drilling and milling unit, 4-spindle (cross head) Blow-off nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC PC 83 control with Windows operation (NT 4.0) EQUIPMENT WOODWOP programming system version 5.0 Network interface Laser positioning aid Chip conveyor belt Safety: safety mats at the front, side protective fencing, rear mounted against the wall Note: A loading aid can be provided against a €5,000 deposit. On return, the deposit is refunded minus 10%.

Kondisi: bekas, Brewhouse with a cast wort capacity of 20 hl, comprising the following components: 1. Milling system (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, grist transport, and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels featuring copper covers, spindle station, and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar), and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Bright beer tank cellar with 2 x bright beer tanks (Speidel, 2021, 86 hl, 3 bar), 1 x bright beer tank (INOX, 2018, 67 hl, 3 bar), and 4 x bright beer tanks (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB Multimat MT/2, 1997, 17–20 kegs/h) 6. Chiller unit as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. Steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-fired) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with control cabinet Need only part of the system? This unit is offered on a brokerage basis. Partial sale may be possible—just contact us and submit your offer. Machine (additional info): Cast wort capacity 20 hl, years built 1997–2021 Cast wort capacity: 20 hl Ljdpfx Aowgc Udsc Hshc Features: Milling system; 3-vessel compact brewhouse; fermentation vats; fermentation, storage and bright beer tanks; keg system; chiller unit; steam generator; hot water tank; CO2 liquid gas tank.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 7.866 h, kapasitas angkut: 2.000 kg, tinggi angkat: 130 mm, panjang garpu: 1.000 mm, berat keseluruhan: 866 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Load centre distance: 600 mm Load distance: 1,023 mm Lift height: 130 mm Fork inner dimensions: 55 / 172 / 190 mm Fork outside spread: 560 mm Fork length: 1,000 mm MACHINE DETAILS Tyres: Polyurethane + Drive wheel size: 230 x 75 mm Load wheel size: 2 x 85 x 80 mm Support rollers (drive side): 140 x 54 mm Track width (drive side): 495 mm Track width (load side): 388 mm Travel speed with load: 7.5 km/h Travel speed without load: 9.0 km/h Lifting speed with load: 1.4 m/s Lifting speed without load: 1.4 m/s Lowering speed with load: 0.9 m/s Lowering speed without load: 1.2 m/s Gradeability with load: 10 % Gradeability without load: 20 % Acceleration time to 10 m with load: 6.9 s Acceleration time to 10 m without load: 5.4 s Service brake: electromagnetic Lhodpfx Asyiancoc Hsc Dimensions & Weight Dimensions (L x W x H): 2,333 x 720 x 1,305 mm Weight: 866 kg Battery voltage: 24 V Rated capacity: 240 / 360 Ah Battery weight ± 5 %: 220 / 290 kg Operating hours: approx. 7,866 h EQUIPMENT Integrated charger Display with charge status and operating hours

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 91656748, Tahun pembuatan: 2021, jam operasional: 2.364 h, kapasitas angkut: 3.000 kg, berat keseluruhan: 560 kg, panjang total: 1.275 mm, lebar total: 600 mm, RINCIAN TEKNIS Kapasitas gandengan: 3.000 kg Daya tarik nominal: 600 N Jarak sumbu roda: 930 mm Beban sumbu tanpa muatan depan: 330 kg Beban sumbu tanpa muatan belakang: 230 kg DETAIL MESIN Dimensi & Berat Tinggi kopling: 158 mm Dimensi (P x L): 1.275 x 600 mm Tinggi kopling: 158 mm Berat: 560 kg Jarak bebas tanah di tengah sumbu roda: 50 mm Radius putar: 1.080 mm Motor / Baterai Daya motor penggerak S2 60 menit: 2,8 kW Tegangan baterai: 24 V Kapasitas nominal: 250 Ah Berat baterai: 220 kg Kecepatan dengan beban: 9 km/jam Kecepatan tanpa beban: 10,5 km/jam Daya tarik dengan beban: 600 N Daya tarik tanpa beban: 600 N Daya tarik maks.: 2.000 N Rem: elektromagnetik Ljdsyiafzepfx Ac Hohc Jam operasi: sekitar 2.364 jam PERLENGKAPAN Pengisi daya

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, WAFIOS DF5 Wire range: 1.5 to 5.0 mm Mesh width: 20 to 100 mm Working width: up to 2000 mm Ljdpfsv Uw Ddox Ac Hohc Output capacity: 170 m²/hour Tooling for mesh width: 60 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 511909V00010, Tahun pembuatan: 2019, jam operasional: 3.097 h, kapasitas angkut: 1.700 kg, tinggi angkat: 5.750 mm, pengangkatan bebas: 1.880 mm, tipe tiang: dupleks, berat kosong: 2.390 kg, DETAIL TEKNIS Kapasitas angkat: 1.700 kg Titik berat beban: 600 mm Jarak beban: 410 mm Jarak sumbu roda: 1.453 mm Free lift: 1.880 mm Angkat: 5.750 mm Dimensi garpu: 50 / 100 / 1.150 mm Carriage garpu: ISO 2.328 A/B Lebar carriage garpu: 760 mm Jarak luar antar garpu: min. 316 / 620 mm Lhodeyh Ik Nepfx Ac Hsc DETAIL MESIN Tipe tiang: Duplex Dimensi & Berat Dimensi (P x L x T): 2.499 x 1.140 mm Berat kosong: 2.390 kg Panjang dengan punggung garpu: 1.349 mm Tinggi pelindung atas: 2.200 mm Tinggi tempat duduk: 1.140 mm Tinggi lengan roda: 308 mm Tinggi tiang terangkat penuh: 6.320 mm Lebar antara lengan roda: 790 mm Baterai/Tegangan/Kapasitas: 48 V / 620 Ah Jam operasional: sekitar 3.097 jam PERLENGKAPAN UVV: 09/26 Blue Spot belakang Manual pengoperasian

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516329X00173, Tahun pembuatan: 2020, jam operasional: 981 h, kapasitas angkut: 5.000 kg, daya: 15 kW (20,39 hp), berat kosong: 5.176 kg, The forklift has only 918 operating hours! TECHNICAL DETAILS Load capacity: 5,000 kg MACHINE DETAILS Unladen weight: 5,176 kg Drive power: 15 kW Battery voltage: 80 V Operating hours: 981 h EQUIPMENT Charger included The following technical data are provided from the listing. The seller cannot guarantee their accuracy! Mast type: TELE (duplex mast) Mast designation: TELE 2550 Lowered height (h1): 2,550 mm Free lift: 160 mm Rated lift height (h3): 3,480 mm Maximum lift height (h4): 4,487 mm Basic load capacity: 4,999 kg Load capacity at rated lift height (3,480 mm): 4,999 kg Load capacity at maximum lift height (4,487 mm): 4,990 kg Fork carriage: 6 rollers, FEM A Width: 1,200 mm With fork wear protection Forks: Length: 1,600 mm Section: 130 × 60 mm Mount: FEM A Operator's station / Cabin Overhead guard (driver protection roof): Approximate height: 2,322 mm Storage: Storage tray / storage compartment in cabin area Lsdpfx Acjyh H Nko Hehc Mirror: Interior rearview mirror as panoramic mirror Hydraulic control: Mini-lever (4-way) Driver's seat: Type MSG65 comfort seat Fabric covering Retaining system: EasyBelt (safety belt system) Drive control: Single pedal control Ignition lock: Lock 530 Electrical / Lighting / Safety Front working lights: LED work lights Mounting position: on overhead guard, top, left and right Rear working light: LED work light Mounting position: on overhead guard, top, right Warning light: Flashing beacon on overhead guard, can be operated via switch Warning system: STILL Safety Light front and rear Assistance system: Speed reduction depending on steering angle (steering angle speed limit) Vehicle connector: 320 A DIN 43589 Schaltbau, LV version

Kondisi: baik (bekas), The Miele PW 6101 MF EL is an industrial washing machine with a 10 kg capacity and electric heating, specifically designed for environments where reliability, durability, and hygiene are essential. Typical applications include care facilities, cleaning companies, hotels, fitness centers, and laundries. Product number: 0019034 Brand: Miele Model: PW 6101 MF EL Length: 800 mm Width: 800 mm Height: 1400 mm Ledpfx Aew Hcgasc Hjhc Connection voltage: 400 V

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00288, Tahun pembuatan: 2019, jam operasional: 5.918 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, panjang garpu: 1.200 mm, de-en Ljdeyh Hy Ajpfx Ac Hjhc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00311, Tahun pembuatan: 2019, jam operasional: 5.505 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, tipe tiang: dupleks, panjang garpu: 1.200 mm, en Ljdpoyh Hqbsfx Ac Hohc

Tahun pembuatan: 2012, Kondisi: baik (bekas), Schokoladenschmelzkessel Macintyre 750kg Lsdpfx Ajv Ipd Asc Hohc Baujahr 2012, Schokoladenschmelzkessel mit 750 kg Kapazität, doppelwandiger Warmwasser-Mantel mit elektrischem Heizsystem, oben montierter 1,5 kW Motor mit Rührwerk, seitlicher Auslauf am Boden, wandmontiertes Bedienfeld, 3-Phasen-Anschluss.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W42377N00009, Tahun pembuatan: 2024, jam operasional: 8 h, kapasitas angkut: 800 kg, tipe tiang: triplex, panjang garpu: 1.500 mm, berat keseluruhan: 1.995 kg, Stacker elektrik dengan hanya 8 jam kerja! RINCIAN TEKNIS Kapasitas angkat: 800 kg Panjang fork: 1.500 mm Tinggi angkat: 2.800 mm DETAIL MESIN Dimensi & berat Dimensi (P x L x T): 2.200 x 820 x 2.260 mm Berat: 1.995 kg Tipe tiang: Triplex Lhsdpfxeyh E Eko Ac Hoc Tegangan baterai / Kapasitas: 24 V / 500 Ah Jam operasional: sekitar 7,3 jam PERLENGKAPAN Charger Clamp karton hidrolik Penjepit samping (panjang 1.150 mm) Manual pengguna (digital dalam format PDF)