Konveyor penutup

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 331965, berat benda kerja (maks.): 500 kg, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 200 mm, Diameter kawat (maks.): 0,25 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Jarak gerak sumbu X: 400 mm Jarak gerak sumbu Y: 250 mm Jarak gerak sumbu Z: 200 mm Jarak gerak (U/V): 400 x 250 mm Sudut konik: +/- 30° pada ketinggian 200 mm Berat benda kerja: 500 kg Tinggi benda kerja (maks.): 200 mm Lebar benda kerja (maks.): 500 mm Panjang benda kerja (maks.): 850 mm DETAIL MESIN Panduan kawat standar: 0,25 mm Dimensi & Berat Pgjdpfxeyz Rxaj Al Ijk Dimensi (P x L x T): 1.800 x 1.600 x 2.180 mm Bobot mesin: 2.190 kg Tekanan injeksi nosel atas: 0 – 11,5 bar Tekanan injeksi nosel bawah: 0 – 11,5 bar

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: Pjdpfx Ajx Ap Hpsl Iegk -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW -45ºC/+40ºC: 86,0 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 350900, berat benda kerja (maks.): 1.000 kg, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 400 mm, Diameter kawat (maks.): 0,25 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! RINCIAN TEKNIS Perjalanan sumbu X: 400 mm Perjalanan sumbu Y: 250 mm Perjalanan sumbu Z: 400 mm Perjalanan sumbu U: 400 mm Perjalanan sumbu V: 250 mm Berat benda kerja: 1.000 kg Tinggi benda kerja (maks.): 400 mm Lebar benda kerja (maks.): 500 mm Panjang benda kerja (maks.): 850 mm Sudut konis: +/- 30° pada tinggi 400 mm RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 1.800 x 1.600 x 2.230 mm Berat mesin: 2.500 kg Pemandu kawat standar: 0,25 mm Psdpfoyz Rvlex Al Isgk PERLENGKAPAN Perlindungan tabrakan sumbu X/Y/U/V/Z

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 3.858 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 705 mm, diameter pembubutan: 275 mm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 795 mm, model controller: MSX-850III, RINCIAN TEKNIS Jarak Sumbu X: 260 mm Jarak Sumbu Z: 795 mm Panjang pembubutan: 705 mm Diameter pembubutan maksimum: 275 mm Diameter pembubutan di atas ranjang: 923,8 mm Diameter pembubutan di atas peluncur silang: 755 mm Kapasitas kerja batang (diameter): 80 mm Stasiun Revolver Atas Jumlah posisi alat: 12 Spindel Utama Kecepatan spindel: 4.000 rpm Daya penggerak spindel: 18,5/18,5/15 kW (10 menit/30 menit/kontinu) Hidung spindel: JIS A2-8 Ekor tetap Jarak gerak ekor tetap: 734 mm Taper: MT5 RINCIAN MESIN Kontrol CNC: MSX-850III Pgodpoyz Aq Isfx Al Ijk Dimensi & Berat Dimensi (P x L x T): 3.100 x 1.922 x 2.120 mm Berat: 5.800 kg Jam Operasi Jam spindel utama: 3.858 jam Jam daya aktif: 21.543 PERLENGKAPAN Konveyor serpihan Lengan pengukur alat

Tahun pembuatan: 2021, Kondisi: baru, Aluminum flat conveyor belt without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crowned and precision-turned Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply the corresponding systems from our own production. Please feel free to contact us by phone as well to find the right solution for your application. Podpfjhfwcbox Al Iogk PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (outer) Wave edge welded on both sides, 40 mm high T-30 carriers/spaced at 400 mm intervals * Antistatic due to threads integrated into the running side fabric Endless welded with stepped finger joint Food-grade certificate provided V2A stainless steel continuous support plate Drive: motor approx. 1.1 KW * Optionally controllable by frequency inverter Connection: 220/400V

Tahun pembuatan: 2007, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang total: 5.700 mm, lebar total: 1.000 mm, panjang benda kerja (maks.): 2.000 mm, lebar benda kerja (maks.): 800 mm, Perlengkapan: Penandaan CE, 1 Psdeyzzhxepfx Al Ijgk

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, kecepatan rotasi (maks.): 2.970 rpm, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of vertical lower units: 5 Number of vertical upper units: 1 Lateral horizontal units: yes Number of pressing elements: 5 Number of lateral horizontal units: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Control system: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal units CNC positioning of the units CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the designated location. Psdsyzy T Tspfx Al Iogk External reference: 6157

Kondisi: bekas, Tahun pembuatan: 1986, en-GB Pgsdpfxeu Dimyj Al Isk

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.400 mm, jarak lintasan sumbu Y: 1.300 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 45 m/menit, Perlengkapan: Penandaan CE, The machine has the following configuration: Drilling units: Upper group with 30 vertical and 6 horizontal spindles Milling unit 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS Psdpfx Asyzy S Nsl Iogk X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Travel speed X-axis: 40 m/min Travel speed Y-axis: 45 m/min Travel speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Single vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Work table with suction bars Number of suction bars: 8 Vacuum clamping for the workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8340

Tahun pembuatan: 1998, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang benda kerja (maks.): 4.200 mm, lebar benda kerja (maks.): 2.200 mm, tinggi tumpukan: 1.000 mm, 1 Pjdoyzy Rxopfx Al Isgk

Kondisi: sangat baik (bekas), D-10720-PCI-UF-Pilot-Plant Ultrafiltrations-Pilotanlage APV Typ PCI-UF 50-100 Pgedpfsihh Spex Al Iok inklusive Pumpen, Wärmetauscher, Frequenzumrichter, Rohrleitungen und weiterem Zubehör. Laboranlage

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, kecepatan pemakanan sumbu X: 30 m/menit, model controller: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Pedpfxjyzy Iws Al Ijgk Speed: 12,000 rpm Unit: Edge pull scraper Manufacturer model: 08.519 Unit: Glue pull scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for edge banding rolls Tank for hot-melt adhesive Pressure roller unit for the edge Pressure with rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. External reference: 6089

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 02DC2563, berat benda kerja (maks.): 1.500 kg, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 310 mm, Diameter kawat (maks.): 0,3 mm, Mesin masih beroperasi hingga 08.04.2026! DETAIL TEKNIS Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 310 mm Perjalanan sumbu U/V: 150 mm Berat benda kerja (maks.): 1.500 kg Dimensi benda kerja maks.: 1.050 x 820 x 305 mm Sudut konik (tinggi benda kerja): 15 mm / 260 mm atau 30 mm / 110 mm Dimensi meja: 840 x 560 mm Pgjdpfx Asyzh Dajl Iok Diameter kawat yang dimungkinkan: 0,10 - 0,30 mm Penahan gulungan kawat: 10 kg DETAIL MESIN Dimensi & Berat Dimensi mesin: 2.687 x 3.030 x 2.150 mm Berat mesin: 3.500 kg PERLENGKAPAN Meja tiga sisi yang dikeraskan

Kondisi: siap digunakan (bekas), Bitzer Compressor Podpsh Dht Djfx Al Ijgk Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/+40°C, 118 kW at -10°C/+40°C, 77 kW at -20°C/+40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Condition: Used, good We offer a wide range of other refrigeration equipment. Refrigeration units, compressors, evaporators, condensers, chillers, cold rooms, as well as refrigerated and catering furniture, and machines for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 100281518, tinggi total: 2.260 mm, lebar total: 1.550 mm, panjang total: 1.685 mm, tinggi produk (maks.): 310 mm, lebar produk (maks.): 150 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Harga baru lebih dari 100.000 EUR! Perangkat siap muat & dikemas siap kirim! Proses pemuatan dapat dilakukan oleh penjual. DETAIL TEKNIS Lebar inspeksi maks.: 150 mm Tinggi inspeksi maks.: 310 mm Sistem Konveyor Tipe konveyor: Meja Putar Kecepatan: 12 – 45 m/menit DETAIL MESIN Generator sinar-X Tegangan: 30 – 75 kV Arus: 1 – 8 mA Daya: maks. 300 W Dimensi (P x L x T): 1.685 x 1.550 x 2.260 mm Kelas perlindungan: IP65 / IP66 Pjdpfx Aljy Ath Ho Iogk Data listrik Catu daya: 200 – 240 V Frekuensi: 50 / 60 Hz PERLENGKAPAN Konveyor meja putar Pendinginan udara hermetis Sistem inspeksi sinar-X