2 hengeres ragasztófelhordó kézi tisztítóval

Kondisi: bekas, nomor mesin/kendaraan: 91132839, Tahun pembuatan: 2018, jam operasional: 9.548 h, No reserve price – guaranteed sale to the highest bidder! Note: The forklift was inspected after relocation. As the necessary transponders are missing, the inspection could not be fully completed. The following defects are known: - Seat locking lever broken off - Steering wheel switch defective - Left side cover deformed - Access module damaged – button defective - Transponders missing The forklift has already been dismantled for transport. MACHINE DETAILS Operating hours: 9,548 h The following technical data is taken from the manufacturer’s datasheet (attached). The seller cannot guarantee its accuracy: TECHNICAL DETAILS Iiodpfxoy Nzl Ts Alcob Load capacity: 1,600 kg Load center distance: 600 mm Load distance: 401 mm Load distance, mast extended: 215 mm Wheelbase: 1,410 mm MACHINE DETAILS Total weight: 3,438 kg Axle load without load front / rear: 2,292 / 1,146 kg Axle load forks forward with load front / rear: 902 / 4,132 kg Axle load forks rearward with load front / rear: 2,024 / 3,014 kg Tires: PU Tire size front: Ø 343 x 114 mm Tire size rear: Ø 285 x 100 mm Wheels, number front / rear: 1x / 2 Rear track width: 1,168 mm

Kondisi: bekas, nomor mesin/kendaraan: 008362, de-001 Iisdpfxjx A Tl Ae Alcsb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 11.206 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20170708, jarak pergerakan sumbu X: 670 mm, jarak lintasan sumbu Y: 830 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain 530, kecepatan spindel (maks.): 18.000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel Range X-axis: 670 mm Travel Range Y-axis: 830 mm Travel Range Z-axis: 600 mm Swivel Range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotary drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control unit: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Overall layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: up to 330 l Total coolant capacity: up to 425 l Operating Hours Control unit on-time: 20,248 h Machine on-time: 19,424 h Program run time: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle cooler Kessler rotary arm, 800 mm swing diameter, fully usable with zero-point clamping system Iisdpsy I Tvnofx Alceb Note: The probing system is not included in the offer. The fixtures, however, are part of the offer.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KMM 540.1196, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, model controller: Fanuc 15 M, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran mengikat untuk pengambilan tepat waktu paling lambat hingga 06.06.2026! RINCIAN TEKNIS Perjalanan sumbu X: 3.000 mm Perjalanan sumbu Y: 550 mm Perjalanan sumbu Z: 550 mm Iisdpfx Aloy Rl Alocob DETAIL MESIN Kontrol: Fanuc 15 M Sumbu putar: Fibro NC1

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 21543, SPALMACOLLA WITH 2 ROLLERS OSAMA MOD. S2R1300 - CE CERTIFIED - USED - Chiller (Thermal conditioner) Cooling system for PVA, urea, polyurethane, and other types of adhesives for 2- and 4-roller gluers. Iiodpfx Asr Ixy Ielcjb This device is essential to maintain a consistent adhesive temperature between the rollers and guarantee set pressing times even in the event of high workplace temperatures, ensuring finished product quality. - Mixer CLT-A (Automatic two-component glue feeder) Automatic mixing and feeding system for roller gluers with two-component PVA and urea adhesives with catalysts, sulphates, and isocyanates. This device is required for continuous or in-line production using two-component glues that must be mixed prior to entering the gluing machine. It includes a mixing head mounted on the roller gluer, fed by special pumps for adhesive and catalyst. The pumps draw the materials directly from the storage tanks, and level probes on the rollers activate the system, ensuring a constant glue level at all times. - No. 2 rollers - Automatic roller washing system - Volt. 400/50 - Serial no. 21543 - Year 2008 - COMPLETE WITH MANUAL AND CE DECLARATION

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 15.396 h, gaya penekanan: 173 t, panjang langkah: 500 mm, berat keseluruhan: 16.000 kg, panjang kerja: 4.250 mm, Perlengkapan: Penandaan CE, riwayat servis lengkap, The machine can be inspected under power until 04/05/2026! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced by Trumpf and has a complete service record. The cylinders are sealed and show no oil leakage. The tools pictured for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Pressing force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Payload: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected load: 28.0 kVA Control voltage: 24 V DC Overrun time: max. 90 ms Overrun distance at 220 mm/s: max. 10 mm Overrun distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam run time: 15,396 h Hydraulics run time: 83,212 h Machine on-time: 152,638 h EQUIPMENT CE marking Documentation/Manual Backgauge with sensors CNC crowning Iijdpsy Hqc Nsfx Alcob BendMaster (robot with 8 m track) Vacuum manipulators CNC regripping station Double sheet detection BendGuard Lasersafe safety device Spare parts: cable carrier, spare vacuum suction cups, BWF fixators (machine feet)

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2011, Fungsionalitas: tidak berfungsi, daya laser: 6.000 W, model sumber laser: TruFlow 6000, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! RINCIAN TEKNIS Daya laser: 6.000 W Sumber laser: TruFlow 6000 RINCIAN MESIN Daya terpasang: 114 kVA Koneksi daya: 400 V Tegangan kontrol: 24 V Pengaman: 200 A Koneksi udara tekan: 6 - 14 bar Dimensi pengemasan Isdpsy Hqahofx Alceib Lemari: 2600 x 800 x 1200 mm Kepala laser: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x   800 x 2000 mm 1400 x 1000 x 2000 mm 2 x  1200 x  800 x 2200 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 1.000 kg, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 370 mm, jarak gerak sumbu Z: 410 mm, model controller: Fanuc Alpha 180is-WB, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Pengajuan tawaran mengharuskan pengambilan tepat waktu sebelum 08.06.26! RINCIAN TEKNIS Bobot benda kerja: 1.000 kg Perjalanan sumbu X: 550 mm Iodpsy Nmxxefx Alceib Perjalanan sumbu Y: 370 mm Perjalanan sumbu U: 410 mm Perjalanan sumbu V: 120 mm Perjalanan sumbu Z: 120 mm Sudut pemotongan maksimum: 30° Jumlah sumbu: 5 Kecepatan rapid X: 900 mm/menit Kecepatan rapid Y: 900 mm/menit Kecepatan rapid U: 450 mm/menit Kecepatan rapid V: 450 mm/menit Kecepatan rapid Z: 900 mm/menit RINCIAN MESIN Kontrol: Fanuc Alpha 180is-WB Jam operasi: sekitar 32.000 jam Bobot mesin: 3.100 kg PERLENGKAPAN Penyambungan kawat otomatis Catatan: Penjualan tanpa layar di atas panel kontrol.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, nomor mesin/kendaraan: 10089060/30042621, panjang total: 5.300 mm, lebar total: 2.100 mm, tinggi total: 2.300 mm, tahun perombakan terakhir: 2024, Tidak ada harga minimum - penjualan dijamin kepada penawar tertinggi! Mesin terakhir kali direkondisi pada tahun 2024! DETAIL TEKNIS Area pemuatan material: 4.000 mm x 2.000 mm Iodpfx Ajy Nkzqjlcoib DETAIL MESIN Dimensi (P x L x T): 5.300 x 2.100 x 2.300 mm PERLENGKAPAN Riwayat layanan dan inspeksi sejak 2019

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 460 mm, kecepatan spindel (maks.): 3.500 rpm, model controller: Fanuc 32iTB iHMI, kecepatan spindle sekunder (maksimal): 4.500 rpm, cmz_turning_milling_center Iisdpfxey Hk Nis Alcjb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 460 mm, kecepatan spindel (maks.): 3.500 rpm, lubang spindel: 86 mm, saluran batang: 78 mm, model controller: Fanuc 32iTB iHMI, lebar di tengah: 689 mm, 1 Iijdpfx Aljy Hk E Rscsb

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: FN744944, Tahun pembuatan: 2025, jam operasional: 15 h, kapasitas angkut: 2.000 kg, tinggi angkat: 3.000 mm, pengangkatan bebas: 150 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, Jungheinrich forklift tahun 2025 dengan hanya 15 jam operasi! Isdpfx Aloy Nc Rwjcoib DETAIL TEKNIS Kapasitas angkat: 2.000 kg Tinggi angkat: 3.000 mm Lift bebas: 150 mm Titik berat beban: 500 mm Panjang garpu: 1.200 mm DETAIL MESIN Jenis bahan bakar: listrik Jenis tiang: Duplex Daya: 9 kW Kapasitas baterai: 750 Ah Kapasitas baterai tersisa: 100 % Tegangan baterai: 48 V Kondisi ban: 100 % Berat sendiri tanpa baterai: 2.350 kg Berat baterai: 962 kg hingga 1.094 kg Jam operasi: 15 jam PERLENGKAPAN Pencahayaan Hidrolik penjepit Gigi palet Sampingan Rotator garpu (180 derajat)