Tangki air pemadam tangki baja 50.000 liter

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00316, Tahun pembuatan: 2019, jam operasional: 6.820 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Smallest pivot point: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,820 h EQUIPMENT UVV 04/26 Charger Hsdjyiaxzjpfx Ahwoi Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panorama roof Digital / display Interior rearview mirror Operating manual Note: The upholstery is worn.

Kondisi: sangat baik (bekas), Multiple underground 150 m³ steel storage tanks (firefighting water tanks) Capacity: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted according to DIN 14230 for use as underground firefighting water tanks: The tank features a firefighting water suction connection in accordance with DIN 14244, equipped with a permanently mounted A-type fire brigade coupling per DIN 14319, design type B, without dip tube. In addition, the tank is fitted with a ventilation flange/stub connection NW/DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank is empty, cleaned, and has been factory-coated externally with bitumen. Hsdpfx Ahofnh Tgewsi - On request, we can supply the tank with a full internal bitumen-based lining (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. An inspection is possible at any time by prior appointment. If you need further information, feel free to call us or send us an email at b.barth (at) barth-tank.de

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 18.183 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15035709304, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, sudut putar sumbu B (maks.): 180 °, sudut putar poros C (maks.): 360 °, The machine will remain powered until 06/03/2026. TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 520 mm C-axis: ±360° B-axis: 180° Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary Table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input and display unit: 0.001° Max. tool length from spindle nose: 315 mm Max. tool weight (with automatic tool change): 6 kg Hsdpfx Ajymmpdshwji MACHINE DETAILS Control: Siemens 840D ShopMill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight with base: 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor High-pressure coolant system (IKZ) with 70 bar Blum TC50 spindle probe

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00299, Tahun pembuatan: 2019, jam operasional: 6.310 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, tipe tiang: dupleks, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Working aisle width for pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width for pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Hsdpfeyia Dkex Ahwei Height above protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height above protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,310 h EQUIPMENT UVV 05/26 Charger Sideshift Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panorama roof Digital display Interior mirror Operating manual

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 2 h, panjang total: 12.200 mm, tinggi total: 2.890 mm, lebar total: 2.440 mm, daya: 1,65 kW (2,24 hp), bahan bakar: diesel, Perlengkapan: Pelat tipe tersedia, These are three emergency power generators, each with 2000 kVA, 1600 kW continuous output at cos-phi 0.8. Voltage: 10 kV, frequency: 50 Hz. Hedpjqqhuyjfx Ahwei Inspection is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamford Design: 40" soundproof container with a noise level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The datasheet (DE and EN) is attached. Each container is equipped with a 2,000-liter tank for initial diesel supply. The units are regularly tested under load.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 511903V00414, Tahun pembuatan: 2019, jam operasional: 6.292 h, kapasitas angkut: 1.700 kg, tinggi angkat: 5.750 mm, pengangkatan bebas: 1.880 mm, tipe tiang: dupleks, DETAIL TEKNIS Kapasitas angkat: 1.700 kg Titik berat beban: 600 mm Jarak beban: 410 mm Jarak sumbu roda: 1.453 mm Free lift: 1.880 mm Ketinggian angkat: 5.750 mm Dimensi garpu: 50 / 100 / 1.150 mm Lebar penahan garpu: 760 mm Jarak luar antar garpu min./maks.: 316 / 620 mm DETAIL MESIN Dimensi & Bobot Dimensi (P x L x T): 2.412 x 1.270 x 2.900 mm Berat: 3.470 kg Panjang termasuk sandaran garpu: 1.262 mm Tinggi tiang angkat saat diperpanjang: 6.320 mm Tinggi atap pelindung: 2.200 mm Hsdsyh Eppspfx Ahwji Tinggi kursi: 1.140 mm Tinggi lengan roda: 308 mm Tegangan / Kapasitas baterai: 48 V / 620 Ah Tipe tiang: Duplex (dapat digeser samping) Jam operasional: sekitar 6.292 jam PERLENGKAPAN Pengisi daya Blue Spot belakang Manual pengoperasian UVV: 06/26

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: UWID/5000/97, kecepatan spindle penggilingan: 10.000 rpm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 20 m/menit, tinggi pusat: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed Rate X-axis: 0 - 20 m/min Feed Rate Y-axis: 0 - 10 m/min Feed Rate Z-axis: 0 - 20 m/min Centre Height: 150 mm Usable Table Area: 980 x 185 mm Hedpfx Aeyh I U Iohwoi Grinding Head Swivel Range: 240° Rotation Speed: 120°/s Spindle Diameter: 170 mm Spindle Speeds: 2,000 – 10,000 rpm Workpiece Carrier A-Axis Indexing Accuracy: ± 15″ Cumulative Indexing Error (at ∅ 100 mm): 8 µm Mounting: ISO 50 Max. Rotational Speed: 50 rpm Position Measuring System Resolution: 0.0001 mm or 0.0001° Tool Magazine Capacity: 70 tools MACHINE DETAILS Control System: NUM 1050 M with PC; Program Memory: 512 KB Drive Ratings Grinding Spindle Motor: 10 kW Table Drive X-axis: 1.5 kW Workpiece Carrier A-axis: 1.5 kW Cross Slide Z-axis: 1.5 kW Grinding Head Column Y-axis: 3 kW Grinding Head Swivel B-axis: 3 kW Electrical Connection Connected Load: 23 kW Main Fuse: 63 A Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Lighting Voltage: 230 V, 50 Hz Compressed Air Air Consumption: 10-12 Nm³/h Min/Max Pressure: 5/8 bar (500/800 kPa) Compressed Air Quality: ISO 8573-1, Class 4 Ambient Temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm Hodpohzbipofx Ahwei RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, panjang penggilingan: 3.150 mm, lebar penggilingan: 800 mm, beban meja: 6.000 kg, daya motor spindle penggiling: 22.000 W, tinggi benda kerja (maks.): 650 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Panjang penggerindaan: 3.150 mm Lebar penggerindaan: 800 mm Ketinggian benda kerja maks.: 650 mm Ukuran bidang meja: 3.150 x 600 mm Hsdpfjylk E Hsx Ahwsi Ukuran pelat magnet: 3.000 x 600 mm Ukuran batu gerinda: 450 x 100 x 127 mm Daya dukung meja maks.: 6 t DETAIL MESIN Kontrol: SIEMENS 840D Total kebutuhan daya: 70,6 kW Daya motor spindle: 22 kW Dimensi & Berat Ruang yang dibutuhkan: sekitar 11 x 3 x 2,4 m Berat mesin: sekitar 15 t PERLENGKAPAN Unit pendingin 2.500 l Pengaturan daya magnet Sistem penyeimbang semi-otomatis Catatan: Kontrol dapat menyala, tetapi perangkat lunak penggilingan MININI tidak memuat karena alasan yang tidak diketahui. Perangkat keras kontrol telah diperiksa dan dalam kondisi baik. File cadangan tersedia.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H-H20140, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, kecepatan rotasi (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 24, DETAIL TEKNIS Perjalanan sumbu X: 610 mm Perjalanan sumbu Y: 510 mm Perjalanan sumbu Z: 610 mm Ukuran meja: 760 mm x 510 mm Hsdpfoylk Eyex Ahwsi Sistem: SK40 Kecepatan putar: 15.000 rpm DETAIL MESIN Berat mesin: 4.700 kg Kontrol: Ultimax PERLENGKAPAN Penukar alat 24 posisi Pendingin internal (IKZ) Konveyor serbuk Handwheel elektronik

Kondisi: sangat baik (bekas), 200 m³ stainless steel tanks Hedjfngl Njpfx Ahwsi Number of items: 3 180 m³ stainless steel tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Base thickness: 5.1 mm We offer transport with our specialized trailer to all regions of Europe!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 286.001.911.20, lebar kerja: 3.000 mm, panjang kerja: 6.000 mm, model controller: Global Control S mit 15 Zoll Farb-Touchscreen, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of oxy-fuel torches: 2 Gas flow control: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA PLEASE NOTE: The Zinser cutting bed is NOT included in the scope of delivery! EQUIPMENT as per original invoice – specifications without guarantee - Joystick and handwheel for Global Control S panel - Cooling system for the control cabinet - Laser diode - Heat shield without air cooling Hsdjyi Ub Hepfx Ahwsi - Track for double-sided longitudinal drive HEB 9 m - OmniFlow oxy-fuel supply up to 70 m³/h - ALFA machine cutting torch with internal ignition - SmartLifter 200 - SensoMat ARKI - Full gas addressing - Light barriers - Safety device: foot switch for wheel housing - Energy supply via energy chain, oxy-fuel 9 m - Drag arm for energy chain Further manufacturer’s technical data – information without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00315, Tahun pembuatan: 2019, jam operasional: 6.239 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, tipe tiang: dupleks, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length including fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Hedpfx Ahsyia Hfewsi Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance centre of wheelbase: 114 mm Working aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight including battery: 3,125 kg Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,239 h EQUIPMENT UVV 04/26 Charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front windscreen with wiper Panorama roof Digital / display Interior mirror Operating manual Note: The upholstery is worn.

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Hodpfsg Tu Rkjx Ahwoi Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang total: 90.000 mm, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 4.000 mm, panjang meja: 4.000 mm, lebar meja: 2.600 mm, en Hsdpfx Ahsyk S Uyewei