Beli Wema bekas (19)

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 053-497, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, CNC machining center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (special-purpose machine) Year of manufacture: 2005 Serial number: 053-497 CNC special-purpose machine model HPC FLEX-V100 by Werkzeugmaschinenfabrik Vogtland. The system is configured as a single-spindle machining module with horizontal/vertical machining capability and an automatic pallet changer. It has been specifically designed for processing bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing for various machining positions and indexing angles. Using this 2-axis combination, a pallet with a clamping device is swiveled from the loading position to the machining position. Loading is performed via an automatic pallet changer with a separate pallet infeed station. Direct loading within the machining area is not structurally intended. The machine is equipped with comprehensive peripheral systems, including a coolant system with a high-pressure unit, chip conveyor, hydraulic power pack, water chiller, central lubrication, and oil and emulsion mist extraction. Machine control is via Siemens SINUMERIK 840D. Used industrial special-purpose machine from a production environment. The unit is fully assembled and equipped with extensive peripherals. Visually, it shows age- and operation-appropriate wear in the working area. Machine inspection possible by appointment. Dismantling, loading, and transport to be done by the buyer. Machine specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machine capacity: approx. 1 workpiece/hour (depending on type) Machining • Workpieces: various bearing cages • Material: CuZn40Pb2 (brass alloy) • Operations: drilling, tapping, milling, facing, brushing Workpiece clamping • Manufacturer: RAKO GmbH • Design: 12-jaw chuck • Operation: manual with power tool • Pallet size: 1250 × 1250 mm Control and drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Electrical data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic system • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 • Tank capacity: 90 l • Maximum pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar Fedpfxsyt I I Ue Aagjpd • Air consumption: approx. 300 m³/h Central lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication interval: every 10 min • Tank volume: 6 l Coolant system • Manufacturer: MANN + HUMMEL • Filtration system: K90 L T63-PF750D-T-ND-SSP • Pump capacity: 500 l/min at 4.4 bar (10 µm filter) High-pressure system • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Pump capacity: 50 l/min • Pump: ALLWEILER Chip disposal • Scraper belt conveyor with pump unit • Pump capacity: 550 l/min at 1.3 bar Extraction system • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Chiller unit • Manufacturer: BKW GmbH • Type: WRK30-2KK2P • Cooling capacity: 8 kW Pallet changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Type: F.M. 2667-0

Kondisi: bekas, Tahun pembuatan: 2009, Maximum internal diameter: 600 mm Maximum grinding depth: 800 mm Maximum grinding length: 600 mm Control system: Siemens 840 D Maximum internal grinding diameter: 600 mm Maximum external grinding diameter: 800 mm Maximum workpiece length: 380 mm Maximum external grinding length: 600 mm Travel distance – X1-axis: 150 mm Travel distance – Z1-axis: 1100 mm Travel distance – X2-axis: 470 mm Travel distance – Z2-axis: 800 mm Workpiece spindle power: 8.5 kW Stepless speed range: 1–795 rpm Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel range (B1-axis): -0.5°/+12° - Workpiece spindle drive power: 8.5 kW - Speed range (steplessly adjustable): 1–795 rpm - Setup speed (jogging): 10 rpm - Spindle nose size A8 according to DIN 55026 - Spindle bore: 58.5 mm - Maximum workpiece diameter: 830 mm - Maximum workpiece length (between centers or floating mount): 800 mm - Maximum spindle head load capacity: 6100 N Internal grinding unit (Z1/X1/B2): - Travel (Z1-axis): 1100 mm - Travel (X1-axis): 150 mm - Swivel range (B2-axis): 270° - Manual longitudinal adjustment of the internal grinding axis on table: 780 mm Fjdswp S Tnjpfx Aagopd - Internal grinding spindle drive power (stepless): Belt-driven grinding spindles: 7.5 kW - Grinding spindle mounting diameter: 100 mm / 125 mm - Grinding spindle mounting length: 220 mm - Maximum grinding diameter: 600 mm - Maximum grinding depth: 800 mm External and face grinding unit (Z2/X2): - Travel (Z2-axis): 800 mm - Travel (X2-axis): 470 mm - Swivel range (B2-axis): 270° - External grinding spindle drive power: 7.5 kW - Grinding spindle mounting diameter: Ø 140 mm - Maximum grinding diameter: 800 mm - Maximum grinding length: 600 mm - Maximum grinding wheel dimensions: Ø 450 x 50 x Ø 127 mm

Kondisi: baik (bekas), Maximum pressing force: 10 tons. Operating pressure: 16 MPa Fedpfxjydlvko Aagjpd Cylinder stroke: 400 mm Downward speed: 100 mm/sec Speed up to: 450 mm/sec Power requirement: 5.2 kW Weight: 1.3 tons Clamping table modified! Not the original table!

Kondisi: bekas, en001 Fpedpfxsu Idvws Aagsd

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000x850x2350 mm No. 2: LxWxH: 1250x650x2230 mm No. 3: LxWxH: 650x600x1700 mm No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations equipped with 15 drilling and milling spindles For example: production of industrial fittings in larger quantities (see photo). Further technical details regarding the machine: - Workpiece carrier: workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holding fixture; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. spindle speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - Left side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - 1st thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 125 mm; spindle speed 35.5 - 900 rpm; reversible (right/left) - 2nd thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 80 mm; spindle speed 45 - 560 rpm; reversible (right/left) Equipment: - 2 hydraulic power units - Chip conveyor system Fedsu Idxfopfx Aagjpd - Band filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Hand-held control unit This machine is not connected. Sale as is! Subject to prior sale.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: - No. 1 (LxWxH): 1000 x 850 x 2300 mm - No. 2 (LxWxH): 1250 x 850 x 2500 mm - No. 3 (LxWxH): 1000 x 850 x 2100 mm - No. 4 (LxWxH): 1000 x 500 x 2350 mm Required floor space (approx.) (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT featuring 3 working stations with 15 drilling and milling spindles For example, for the production of fittings in larger quantities Further technical data of the machine: - Workpiece carrier: Workpiece drum Ø 800mm for 8 workpiece clamping stations, indexing time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. spindle speed 2240 rpm - Left: 3x drilling and milling spindles and drilling spindles, and 2x thread cutting spindles - Right: 2x drilling and milling spindles and 2x thread cutting spindles, and 1x U-axis, as well as radial 2x adjustable thread cutting spindles, 2x drilling and milling spindles (one adjustable), and 1x adjustable U-axis - 1st thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left Fsdpfx Asu Idv Doagjpd - 2nd thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter from Filtertechnik Gera (fleece belt 430mm) - Control panel - Manual pushbutton Subject to prior sale.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Fjdpsu Idxrofx Aagepd Machine dimensions: LxWxH: 2400x2800x2800 mm Control cabinet dimensions No. 1: LxWxH: 1000x850x2350 mm Control cabinet dimensions No. 2: LxWxH: 1250x650x2230 mm Control cabinet dimensions No. 3: LxWxH: 650x600x2300 mm Control cabinet dimensions No. 4: LxWxH: 1300x650x2350 mm TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles E.g. for series production of fittings in large quantities Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm - Left: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm, as well as 3x radial drilling and milling spindles, including 1x U-axis and 1x thread-cutting spindle - 1st thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power packs - Chip conveyor - Band filter by Filtertechnik Gera (nonwoven band 430mm) - Operator panel - Hand-held pushbutton controller i.D.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Wema Probst RHM 250 II-H milling machine – NEW - Diameters from 100mm to 250mm - Electronic feed adjustment - 2 milling heads Fpodpfx Aasubbryogjd - Head 1: diameter 150–300mm - Head 2: diameter 100–250mm - Feed rate 6–34m/min - Complete electrical cabinet and control panel

Kondisi: bekas, Wema Probst profile milling machine Main motor: 11 kW Dismantled and ready for loading Fodpfx Ajc N N U Noagopd

Kondisi: sangat baik (bekas), Diameter piring pengupas: 600 mm Jumlah pisau: 6 Fpsdsxz Unpepfx Aaged Tegangan: 380 V, 50 Hz Kapasitas penggerak: 11 kW

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Wema Probst QF50 cross machining machine Fjdpfx Aowc Tdnjagjpd Cross milling machine for processing round timber, equipped with a swiveling table to set the milling angle. 2x processing stations 1x cross milling unit 1x drilling unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, tinggi total: 34.500 mm, tinggi pemasangan: 800 mm, lebar total: 12.500 mm, panjang total: 22.000 mm, kedalaman tenggorokan: 800 mm, gaya penekanan: 160 t, lebar meja: 900 mm, panjang meja: 630 mm, kecepatan operasi: 200 mm/dtk, berat keseluruhan: 7.000 kg, kecepatan mundur: 125 mm/dtk, lebar pelat tuas: 700 mm, panjang pelat penekan: 450 mm, jenis arus masuk: tiga fasa, panjang langkah: 500 mm, tekanan kerja: 160 batang, tekanan: 250 batang, kapasitas tangki oli: 500 l, daya: 17 kW (23,11 hp), Press hidrolik PYE 160 S/1M. Tahun produksi 1984. Produsen VEB Wema Zeulenroda (Jerman). Mesin telah menjalani pemeriksaan menyeluruh. Spesifikasi: Gaya tekan maksimum 160 ton. Tekanan kerja 16 MPa. Meja atas 700 x 450 mm. Meja bawah 900 x 630 mm. Celah bebas 800 mm. Langkah silinder 500 mm. Kecepatan turun 200 mm/dtk. Kecepatan naik 125 mm/dtk. Kebutuhan daya 17 kW. Kapasitas oli dalam tangki 500 l. Berat 7000 kg. Tinggi 3450 mm, panjang 2200 mm, lebar 1250 mm. Mesin dalam kondisi sangat baik. Dapat dilakukan inspeksi dan pengujian mesin saat beroperasi. Fedpfxjqy E I Re Aagopd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.700 mm, lebar total: 1.250 mm, panjang total: 2.200 mm, kedalaman tenggorokan: 800 mm, gaya penekanan: 250 t, lebar meja: 900 mm, panjang meja: 630 mm, kecepatan operasi: 200 mm/dtk, berat keseluruhan: 8.000 kg, kecepatan mundur: 110 mm/dtk, lebar pelat tuas: 750 mm, panjang pelat penekan: 450 mm, panjang langkah: 500 mm, kapasitas tangki oli: 500 l, Presa hidrolik PYE 250 SS. Produsen: WMW VEB Zeulenroda (Jerman). Tahun: 1985. Spesifikasi: Gaya penekanan maksimum 250 ton. Tekanan kerja 18,6 MPa. Meja atas 750x450 mm. Meja bawah 900x630 mm. Ruang bebas 800 mm. Langkah silinder 500 mm. Kecepatan ke bawah 200 mm/detik. Kecepatan ke atas 220 mm/detik. Daya yang dibutuhkan 24 kW. Berat 8.500 kg. Tinggi 3680 mm, panjang 2200 mm, lebar 1250 mm. Kondisi teknis mesin sangat baik. Mesin telah menjalani overhaul penuh. Fsdpovcb Tlsfx Aagjpd

Kondisi: baru, The VKM supplies spare parts for the entire range of VKM and Oswald machines, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing for various woodworking machines. Some parts are available directly from stock. Below is a selection of the most frequently requested parts: Centering roller, bore 40mm €112.00/each Centering roller, bore 50mm €156.00/each Feed roller, bore 40mm €118.00/each Feed roller, bore 50mm €138.00/each Take-off roller, bore 40mm €102.00/each Fpjdpfx Aaog Rn Aveged Feed roller, bore 50mm €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We would be pleased to provide you with a quotation including our commercial terms. Additional spare parts available on request.

Kondisi: baru, Tahun pembuatan: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, and certain Bezner-Oswald and Wema Probst machines, as well as BÖGLI bandsaws and replacement knives manufactured to drawing specifications for various woodworking machines. Some items are available for immediate delivery from stock. Below are some of the most frequently requested parts: Centering roller, 40 mm bore, €112.00/each Centering roller, 50 mm bore, €156.00/each Feed roller, 40 mm bore, €118.00/each Feed roller, 50 mm bore, €138.00/each Fpodpfx Aaowagxmoged Take-off roller, 40 mm bore, €102.00/each Feed roller, 50 mm bore, €126.00/each Bezner WP35 peeling disc, €3,920.00/each Oswald RM162 guide slide RM7072W, €302.00/each Oswald RM162 knife holder RM7066W, €215.00/each We would be pleased to provide a quotation including commercial terms. Additional spare parts available on request.

Tahun pembuatan: 2020, Kondisi: bekas, 3233 Horizontal Drilling Machine Wema Probst QBV 200 Used, year of manufacture 2020 The machine is in as-new condition, with fewer than 30 drilling operations performed. Designed for making transverse milling and drilling operations in round-milled or profiled timber. This machine allows for the production of form-fit connections in round timber with three-dimensional manual adjustment. Typical applications include corner joints for log houses, timber frame structures, or products in the "garden wood" sector such as fences, carports, planters, raised beds, safety barriers, etc. The horizontal drilling machine consists of a base frame with welded steel construction, a swiveling drilling device, gas spring-assisted drilling column, and an adjustment system for positioning the drilling column. The timber is clamped with two centering vices. With the special tool (circular saw), asymmetric or end-face machining can be carried out. The machine also allows for drilling 90° holes of up to 120 mm diameter in timber using flat drills. Accessories: Collet chuck for 25 mm tool shank diameter, no tools included Timber diameter: 60 - 200 mm Adjustment range of the tool: - +/- 60° for 60 mm diameter - +/- 45° for 80–140 mm diameter - +/- 30° for 160–200 mm diameter Motor power: 2.2 kW Speed: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm (L x W x H) Weight approx. 380 kg Sale on behalf of customer, ex location near 46026 Valencia (Spain), without dismantling, transport, or installation included Dismantling, loading, and transport by us available as an option Subject to prior sale and errors in description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale as is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the sale is made on an “as seen and inspected” basis Pictures and videos serve as examples and do not represent the actual delivery scope Fodpfxswt Abwo Aagspd Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery conditions: ex location

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Singulation system for small-diameter timber and stakes Fpsdpswqdc Rjfx Aaged for RH milling machines or other applications. Consisting of: inclined infeed with retaining hooks. Disc singulation / cascade with 3 singulation stages. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Singulation system for small-diameter timber and stakes for RH milling machines or other applications. Consisting of: inclined infeed with retaining hooks. Disc singulation / cascade with 3 singulation stages. Wood length from 0.3 m to 5.5 m. Fedpfewqf S Hsx Aagepd Wood diameter up to approx. 12 cm. Ready for demonstration.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, 1- Loading logs 2 - Infeed to cylinder 3 - Cylinder The resulting log diameter is 75–200 mm Minimum input material length: 1100 mm 15 kW cutter head drive motor Infinitely variable feed rate control + forward / reverse + 1.7 kW feed motor Simultaneously: 2+ toothed sprocket rollers Fedpfx Asthqqmjagopd 4+ cutter heads 2+ smooth feed rollers Electrically adjustable cutter head 0.25 kW Electrically adjustable axes 1.1 kW Dimensions (L/W/H): 3570 x 1300 x 1700 mm Weight approx. 4000 kg 4 - Cylinder outlet