Set spacer rol umpan WEINIG

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Kodpfxohlp D No Aahefa The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm Kfoderigxyopfx Aahja The machine has been inspected and is in original condition

Kondisi: bekas, Tahun pembuatan: 2004, Instalasi finger joint setengah otomatis yang ringkas terdiri dari: - Mesin frais PJ 150/500 - Meja transfer untuk penyerahan manual Kodpfx Aaew Nbacjhsfa - Press satu kanal PJ 7/6100 li Mesin frais: 2 paket/menit Press: 2 siklus/menit Panjang masuk: 150 – 700 mm Panjang akhir: maks. 6.100 mm

Kondisi: baru, Technical specifications: Maximum saw blade diameter: 400 mm Minimum saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit with separate motor Manual height adjustment of the saw blade Tiltable saw blade from 0° to 45° Manual saw blade tilt adjustment Carriage length: 3200 mm Carriage lock Working table: 1450 mm x 1030 mm Table height: 920 mm Table extensions: 2 pcs Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Ksdpfov S Uz Isx Aahofa Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Technical Documentation (DTR) included TECHNICAL PARAMETERS: Planing width: 150 mm Planing height: 50 mm Kfodpfx Aajin Nrgjhja Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 RPM 2) Top head: 18.5 kW, 7000 RPM 3) Bottom head: 5.5 kW, 6000 RPM Feed motor: 2.2 kW Feed speed adjustable via inverter: 0–18 m/min Feed via cardan shafts Pneumatic pressure system Three upper steel feed rollers One upper rubber feed roller Ribbed table Infeed table length: 1950 mm Total power: 37 kW Centralized lubrication system Transport dimensions: Length/Width/Height: 320 x 220 x 220 cm Weight: approx. 2700 kg

Kondisi: baru, Holzkraft minimax si 400es 32 panel saw 5504754 Heavy-duty professional model with scoring unit and anodized aluminum format sliding table. - Scoring unit equipped with its own drive motor and easily adjustable from outside - Smooth-running and precise anodized aluminum format sliding table with proven, permanently smooth-running ball contact system on hardened, wear-resistant rails (10-year warranty on rail wear) - Large support table extension (longitudinally adjustable) with material roller on telescopic arm - Extendable telescopic crosscut fence with two flip stops - Precise parallel fence, foldable for large panels, with quick clamping and integrated fine adjustment - Standard features include table extension, table lengthening, and eccentric clamp - Saw unit made from a robust cast iron ring with permanently precise dual pivot segment guides and zero-point tilt adjustment for smooth and perfect cuts (Holzkraft 6-year warranty on wear of swivel segments) - Large worktable made of stress-relieved cast iron - High intrinsic weight ensures precision and smooth operation - Equipped with a powerful three-phase motor - Version M: Motorized height adjustment and tilt of the saw unit, digital readout for tilting angle - Version A: Start/stop switch mounted on the sliding table - Version M A 3: Programmed control of saw blade height and tilt, programmed parallel fence positioning, infinitely variable fence movement via switch or automatic positioning system, position display via encoder, adjustment via ball-screw drive, incremental adjustment possible - Version UP: Swiveling control panel at eye level - Made in Italy TECHNICAL DATA: Dimensions and Weights Net weight approx. 715 kg Dust extraction connection Dust port diameter 120 mm Saw blade guard dust port diameter 80 mm Installation Information Transport width 990 mm Machine body length 1900 mm Machine body width/depth 885 mm Required installation length 7180 mm Required installation width/depth 4860 mm Kedpfxokkrm Rj Aahofa Note: The required installation dimensions consider maximum travel or usable lengths. Working area length 1600 mm Working area width/depth 2300 mm Note: Add the working area dimensions to the required installation dimensions to determine the recommended free space for installing the machine. Electrical Data Supply voltage 400 V Mains frequency 50 Hz Scoring motor power 0.55 kW Main drive motor power 7.0 kW Main drive motor duty cycle S6 Main drive motor duty cycle 40% Sliding Table and Table Sliding table length 3200 mm Sliding table width 360 mm Sliding table height 142 mm Table length 940 mm Table width 560 mm Table height 900 mm Saw Unit Cutting width with parallel fence 1270 mm Maximum crosscut width left of saw blade 3260 mm Edging length 3200 mm Saw blade tilt 90 – 45° Maximum cutting height at 90° 136.5 mm Maximum cutting height at 45° 97 mm Note: Max. cutting height is independent of scoring blade. Saw blade diameter 400 mm Note: Saw blade diameter is independent of scoring blade. Saw blade speed 4000 rpm Scoring Unit Scoring blade diameter 120 mm Scoring blade speed 9200 rpm Holzkraft authorized dealer – accessories available on request!

Kondisi: sangat baik (bekas), CATALOG NO. 6651 Ksdpfx Aaeh Up Ipjhofa TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 4 spindles: 1) Bottom horizontal 220 mm 4 kW 2) Right vertical 120 mm 4 kW 3) Left vertical 120 mm 4 kW 4) Top horizontal 220 mm 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 powered infeed rollers, toothed, including 2 double rollers - Top: 1 powered outfeed roller, smooth, rubber-coated - Bottom: Powered outfeed rubber roller - Pneumatically pressed rollers - Feed by Cardan shaft rollers - Feed motor: 1.1 kW - Lifting motor: 0.37 kW - Electric thickness adjustment - Infeed table length: 1980 mm - Side pressure device - Infinitely variable feed speed: 8–16 m/min - Centralized lubrication system - Extraction port diameter: 5 x 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3400 x 1500 x 1700 mm - Weight: approx. 1670 kg Net price: 39,900 PLN Net price: 9,500 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- Kedpswwl Nlefx Aahofa First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: sangat baik (bekas), Lini penyambungan kayu Grecon Profijoint Grecon Profijoint Panjang material masuk: 150-700 mm Lebar material: 40-150 mm Tebal kayu: 18-50 mm Mesin tenon tunggal Ksdew Ilryepfx Aahefa Kemungkinan frais pada garis Daya spindle milling: 15 kW Daya spindle penghancur/pemotong: 11 kW Sertifikat CE

Kondisi: sangat baik (bekas), Four-sided planer Weinig Profimat 23 Fortec Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Kfodpfx Aaoumxqrshoa Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certificate