Gergaji, penitik pas

MS 35-SF

Kondisi: sangat baik (bekas), Gergaji potong miring ganda Hoffmann MS35-SF/S07.117 Pemotongan pada sudut 45° Motor gergaji: 4 × 2,2 kW Kecepatan putaran mata gergaji: 3000 rpm Ukuran mata gergaji: 350 mm, lubang 30 mm Lebar kerja maks: 80 mm Tinggi kerja maks: 80 mm Unit frais ekor burung: 2 × 0,5 kW Fpsdpjw T R T Tjfx Abhec Kecepatan putar frais: 19.000 rpm Kemungkinan pengaturan dua posisi frais Tekanan kerja: 6 bar Sertifikat CE Dokumentasi DTR Berat sekitar 800 kg Dimensi total mesin dengan meja: 658 × 92 × 170 cm (T)

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Fpjdodh Tfgopfx Abhjc Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight: maximum 30 kg/meter The maximum cross-sectional diagonal of the previous customer was 220 mm. The specified weights are only possible with a driven roller conveyor provided by the customer. Fjdpslcc U Eofx Abhopc Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, cleaned, and oil-free Air Consumption: approximately 20 NL per cycle Maximum Feed Pressure: 8 bar Noise Emission Value: less than 80 db/A Machine: see layout Operating Side: right in direction of conveyor Control Cabinet: fixed on the left side of the machine Paint: Machine 7032, grey Black-yellow Roller Conveyor Height: 900 mm

Kondisi: bekas, Transfer unit, roller conveyor, roller track, powered roller conveyor, roller path, roller track with stripper conveyor, transfer station Fpjdpjrv Av Iofx Abhjc -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base frame: robust, height-adjustable base frame -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller conveyor: conveyor rollers Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor belt: 6 belts 17 x 2830 mm -Drive/gearbox: Nord, see type plates in the photos -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Kondisi: bekas, de_001 Fodpfx Abs R U U Ajhjpc

Tahun pembuatan: 2009, Kondisi: baik (bekas), Powered roller conveyor, roller track, driven roller conveyor, roller conveyor Fedpfxeb A S Uge Abhopc -with rotary unit, can be rotated via servo motor -robust design -electrically driven -drive motor: 0.37 kW, 76 rpm -roller width: 1450 mm -conveying length: 1400 mm -roller diameter: 105 mm -rollers: rubber-coated -shaft diameter: 25 mm -conveying height: 950 mm, adjustable -driven by: belt -dimensions: 1400/1650/H960 mm -weight: approx. 300 kg

Kondisi: sangat baik (bekas), ZIM Hülsta Case Uprighting Device The case uprighting device is used for positioning and transferring assembled carcasses. Fpjdpfxevdb Ixs Abhjc Case uprighters are typically employed in continuous-flow assembly systems with case clamps. They facilitate the handling of large workpieces during setup. This is a transport and assembly device used within a carcass assembly line. After a continuous-flow case press, the pressed carcasses are tilted onto their backs by means of this device. This allows assembly work to be carried out on the underside. Manufacturer: ZIM Hülsta-Werke Model: Case Uprighting Device Dimensions: You will find further new and used items in our shop! International shipping costs available upon request!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 941, tinggi kerja: 1.350 mm, lebar kerja: 600 mm, panjang kerja: 2.500 mm, DETAIL TEKNIS Fedpfxjxnyg Ro Abhjpc Panjang tekan: maks. 2.500 mm Tinggi tekan: maks. 1.350 mm Kedalaman kerja: maks. 600 mm DETAIL MESIN Data listrik Tegangan nominal: 3/N/PE/400 V Arus nominal: 11 A Daya nominal: 4,7 kW Frekuensi: 50 Hz PERLENGKAPAN Balok tekan vertikal dan horizontal digerakkan secara elektromekanis Pembentukan tekanan melalui motor gearbox yang dikontrol frekuensi Tekanan tekan vertikal dan horizontal dapat diatur secara terpisah Waktu penekanan dapat diatur