Mesin bor horizontal Mabo UNIC

mabo unic

Kondisi: baru, Tahun pembuatan: 2026, Technical Data: • Extraction capacity ~ 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction connection 250/200mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1,982 x 2,144 mm • Weight 300 kg • Filter category G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: Codpfxsd H Rf Ts Ad Rera • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Chassis • Filter cleaning via vibratory system with control panel + €850 for models with fire extinguisher (Safe System)

Kondisi: baru, Saw blade diameter 420 x Ø 40 mm Cutting diameter 170 mm Cutting length 410 mm Saw blade dimensions 420x3.2/2.4x40 mm Speed 3,500 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 120 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting applications * Drive motor 3.0 kW - 400 Volt Cedpfx Aoxabztsd Rjra - Double-sided mitre adjustment (60° / 45°) with fixed stops - Compound mitre cuts on both sides at 45°, with fixed stops - Robust cast iron construction - Precision recirculating ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Continuously height-adjustable saw blade - Port for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound mitre adjustment via handwheel, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative, for aluminium and plastics - Continuously adjustable hydraulic feed brake - Pneumatic material clamping from above, standard equipment: * 2 vertical clamping cylinders, adjustable, with manual lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Kondisi: baru, Technical data: Crjdpfxogtm U Aj Ad Rea Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Cedpfxsrigxyj Ad Rjra Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Csdpfjdqzcxex Ad Rora

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cjdpfx Asi Dfided Rjra Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, A550 Vollautomatische Massivholz-Säge 9 m Cedpsf Ekngofx Ad Rsra Vollautomatisches Zuschneiden von mittleren bis großen Hölzern mit benutzerfreundlicher Automatisierung. Einfach beliebige Holzstücke auflegen – die Maschine erkennt diese automatisch und schneidet sie entsprechend der Aufträge dank hochpräziser Servomotor-Materialpositionierung. Excel-Auftragslisten-Eingabe via WIFI für effiziente Verarbeitung großer Zuschnittlisten. Ihre vollautomatische Säge ist optional auch als Inline-Optimierer-Säge erhältlich. Für jedes aufgelegte Holzstück – unabhängig von der Länge – misst ein Lasersensor die Länge. Unser leistungsstarker Optimierungsalgorithmus nimmt Ihre Zuschnittliste und kalkuliert die beste Reihenfolge der Zuschnitte, um Materialabfall zu minimieren. Dies geschieht während des laufenden Betriebs automatisch – ohne weiteren Bedienereingriff. • Vollautomatischer Schneidbetrieb mit Stangenförderung und Längenablängung • Einfache Benutzeroberfläche: Auftragseingabe und Zuschnitt in Sekunden • Vereinfachte Teile-/Chargen- oder umfangreiche Excel-Listenbearbeitung • Bündel- bzw. Mehrstabzuschnitt und Zählfunktion • Fern-Eingabe von Excel-Auftragslisten via WIFI mit umfangreichen Datenzuordnungsmöglichkeiten • Frei einstellbare Vorschub- und Sägeschnittgeschwindigkeiten für maximale Produktivität • Automatischer Etikettendruck für Teile anhand der Auftragsliste (manuelles Aufbringen, optional) • Direktdruck auf das Material inline ohne Bedienereingriff (optional) • Barcode- bzw. QR-Code-Druck oder -Erfassung zur Auftragseingabe (optional) • Automatisierte Servo-Verstellung des Gehrungswinkels der Säge bis ±75° (optional) Ideal geeignet für: • Rahmen- und Fachwerkfertigung • Herstellung von Gartenhäusern • Möbelproduktion • Fertigung von Gehrungsholzkonstruktionen • Großserienzuschneidung von Holz Modell: A550 Länge: 9 m Materiallänge: 8.580 mm Schubkraft: 20 - 40 kg Software: Optimierer HOCHWERTIGE MASCHINEN MADE IN AUSTRALIA.

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Crodpohp Rcrefx Ad Roa Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws Cjdpfx Adsdqzh Ro Rsra - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table dimensions: -- Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Technical Data Table width: 500 mm Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic Cjdpfxopgkmws Ad Rjra T 541-a Tersa cutterblock with 4 knives Location: Available ex-stock, 54634 Bitburg - Immediately available -