Tekan kolom tunggal - hidrolik

MAE S 100

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Dodpfx Afecxxrrjtjup Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TET351P5-offAD-Bypass - 2200373733, kapasitas pendinginan: 66 kW (89,73 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.082 kg, suhu lingkungan (maks.): 46 °C, suhu lingkungan (min.): -5 °C, tegangan masuk: 400 V, tekanan: 6 batang, suhu: 7 °C, laju aliran volumetrik: 11,2 m³/jam, tekanan pompa: 4,68 batang, lebar total: 866 mm, panjang total: 2.250 mm, tinggi total: 2.054 mm, masa garansi: 3 bulan, frekuensi input: 50 Hz, Perlengkapan: Pelat tipe tersedia, Air-cooled process chiller / chiller unit Model: TAEevo Tech 351 P5-offAD-Bypass Manufacturer: MTA S.p.A. Chiller, cold water unit; cooler The TAEevo Tech 351 P5-offAD-Bypass is a compact, air-cooled water chiller suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Dsdpfx Afowlt Raetsup Special equipment: - Open filling system / tank mounted - Manual valve bypass between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of construction: 2021 Condition: Visual 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have cosmetic defects due to usage. (Technical modifications and prior sale reserved!)

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Dodpfx Ajfxyhfjftsup Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, diameter poros: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rolls are hydraulically adjusted - Three rolls driven - 2 digital readouts - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation Duedpeucqqusfx Aftjp - 400V

Kondisi: baik (bekas), Tahun pembuatan: 1956, fa8ae4bb Djdpfeh Uuzyjx Aftoup

Kondisi: siap digunakan (bekas), Further information will follow. Accessories: Dedpfx Asqzx Dqefteup Separator frame (stainless steel) 1200 x 1000, separator bowl, motor, Tool kit, documentation

Kondisi: baru, Tahun pembuatan: 2025, Kabinet sandblasting tekanan DSK 11.11.30. Ruang blasting B=1050 D=1050 T=955mm. 1 tangki tekanan bersertifikat TÜV 30l dengan corong keluaran berbentuk kerucut. 1 katup dosing media blasting dengan regulasi jumlah media berkontrol pneumatik. 1 kerucut penutup internal dengan pipa pemandu. 1 sambungan udara tekan dengan katup penutup pneumatik dan cabang untuk udara kontrol. 1 regulator tekanan untuk penyetelan tekanan blasting. 1 selang blasting DN19. 1 handpiece dengan nozzle blasting boron carbide Venturi 8mm. 1 pasang sarung tangan blasting. Pengaturan ketinggian kabin secara elektrik untuk posisi kerja ergonomis. Memori posisi untuk 3 ketinggian. Filter penghilang debu 2000m³/jam 2,2kW. Djdpfx Afega Ehbjtsup

Kondisi: bekas, Tahun pembuatan: 1970, nomor mesin/kendaraan: 120895, EN-TRANSLATION-001 Dedpefx Hv Hsfx Afteup

Kondisi: bekas, Tahun pembuatan: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Maximum multiple feed length: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control system; Dsdpfxsvxwkfj Aftjup Frequency-controlled saw band drive; Minimum quantity lubrication; Chip conveyor; Powered infeed conveyor 6 m + 3x short roller conveyor 1 m; Outfeed conveyor 2 m; Machine can be inspected under power.

Kondisi: baru, Tahun pembuatan: 2025, 2-driven-roll profile bending machine Hydraulically adjustable top roll Shaft diameter: 40 mm Roller diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various versions: Manual adjustment, 3-roll drive, etc. Dedehgiuhopfx Aftjup