Mesin ukur CNC multisensor

Mahr MS664 Werksüberholt mit Garantie

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, jam operasional: 6.900 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 300 mm, tsl-001 Ihodpfx Asv Ai Ukja Net

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensive equipment! Very low spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120 ° - C-axis: 360 ° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW Ihjdsx Hx Rhjpfx Aa Nst - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine positions: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, of which 6 with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction - Tool blow-off device - Blow air at spindle carriage - Blow air through spindle center - Internal coolant supply 18 - 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight approx. 8,600 kg Inspection / test under power on site is of course possible. We are not your average machine dealer -> Here you are advised by CNC experts! We are pleased to offer you transport, moving, installation, commissioning, and training for the machine — all with our own technicians. All from one source: We, Baumgärtner CNC GmbH & Co.KG, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repairs, you can count on us.

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser enables marking of nearly any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many sectors, laser marking has become indispensable for permanent inscriptions. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without in-depth programming knowledge. The software can automatically increment serial and article numbers once configured. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with bracket, Windows operating system, and laser software. Optionally, the LAS 28 XL can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available on request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm (larger optional) • Marking software EZCAD in German/English • Signal tower for operational status indication • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: fume extraction (incl. activated carbon filter) • Optional: extension arms for large components (single-sided, double-sided) • Optional: autofocus system • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis Ihodpfx Aoqfcvisa Njt • Laptop with bracket and Windows OS • Frame made of aluminum profiles • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: Isdpfjdyah Sox Aa Neht - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Kondisi: bekas, Tahun pembuatan: 2017, Absolutely as new Comprising: 1 measuring case 12-20 mm 1 measuring case 20-50 mm 1 measuring case 50-100 mm Ihodpfevvxvdsx Aa Net

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 00287, Technical Data Manufacturer: Brown & Sharpe Model: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring Range X = 1000 mm Y = 1500 mm Z = 900 mm Measuring Table Length = 2280 mm Width = 1145 mm The machine can be upgraded with new accessories according to customer requirements. Price: on request! Assembly and commissioning available! We will be happy to provide you with a detailed quotation. Iodpji Dpggjfx Aa Njht Note: Our offer is directed exclusively at professional customers. (Specifications, information, and prices subject to change and prior sale!)

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Iodpfx Aot E Dbyoa Neht Including (list not exhaustive): - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 240 mm, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 42.000 rpm, 5-axis HSC Milling Machine Röders RXP500DSC with linear direct drives on all axes and torque drives on the rotary axes. Ihodpfx Aaett Argj Not The machine is being completely overhauled, inspected, and calibrated at our facility. The machine will meet new machine tolerance standards upon completion! Traverse paths: X450mm, Y400mm, Z240mm Spindle/Table distance: approx. 315mm - Linear direct drives on all axes – wear-free - 19-position tool changer - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic calibration of milling tools (length/diameter/contour/taper angle) as well as wear monitoring, including tool cleaning before measuring - Handheld pendant - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - EROWA zero-point clamping system integrated into the machine table - Manual chuck actuation - Automation package for retrofitting the machine with a pallet changer - Handheld pendant Viewing the machine in operational condition is possible at any time. You are also welcome to visit our website or our Hüttmann YouTube channel for more information about the range and quality of our refurbished machines.

Kondisi: baik (bekas), Tahun pembuatan: 1989, tinggi total: 6.450 mm, For sale: Beche short-stroke drop hammer KGH 4B. Machine weight: 65 t Iodpfx Ajrt Uc Eoa Noht Working energy: 40 kJ Max. blow frequency: 98/min Max. usable stroke rate: 41/min Max. ram stroke: 790 mm Machine is dismantled. Technical data available upon request.

Kondisi: bekas, Article: Clamping heads Brand: various manufacturers For multi-spindle automatic lathes, used or new Iodpfxon H Nzuo Aa Njht Please contact us for further information and pictures via email(at) or