Pengembalian panel

MAHROS SPINNER

Kondisi: belum diuji (bekas), Tahun pembuatan: 2012, Fungsionalitas: belum diuji, lebar pemotongan (maks.): 4.500 mm, kecepatan pemakanan sumbu X: 140 m/menit, panjang bagian (maks.): 2.200 mm, Perlengkapan: Penandaan CE, doser, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (pre-scoring unit): 200 mm Saw blade projection: 95 mm Number of longitudinal saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Pre-scoring unit 1 connected load: 2.2 kW Pre-scoring unit 2 connected load: 2.2 kW MACHINE DETAILS Dodpsyxn Adsfx Ahuekk Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible pusher system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5711

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Dksdpeyxndbofx Ahujk Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7673

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, kecepatan rotasi (maks.): 2.970 rpm, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of vertical lower units: 5 Number of vertical upper units: 1 Lateral horizontal units: yes Number of pressing elements: 5 Number of lateral horizontal units: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Control system: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW Dkjdpfx Aheyzy T Tsujk EQUIPMENT Lateral horizontal units CNC positioning of the units CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the designated location. External reference: 6157

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.400 mm, jarak lintasan sumbu Y: 1.300 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 45 m/menit, Perlengkapan: Penandaan CE, The machine has the following configuration: Drilling units: Upper group with 30 vertical and 6 horizontal spindles Milling unit 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Travel speed X-axis: 40 m/min Travel speed Y-axis: 45 m/min Travel speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Single vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Work table with suction bars Number of suction bars: 8 Vacuum clamping for the workpiece CE safety standards Automatic chip extraction Dksdpfxsyzy S No Ahujk The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8340

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, kecepatan pemakanan sumbu X: 30 m/menit, model controller: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Dedpfx Ahoyzy Iwsuokk Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge pull scraper Manufacturer model: 08.519 Unit: Glue pull scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for edge banding rolls Tank for hot-melt adhesive Pressure roller unit for the edge Pressure with rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. External reference: 6089

Kondisi: bekas, nomor mesin/kendaraan: 007234, Maximum panel width: 900 mm Maximum panel length: 1200 mm Conveyor length: 8000 mm Return conveyor for edge banding machine: left Dsdpfowlpnnox Ahujkk

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 2.000 mm, lebar benda kerja (maks.): 800 mm, panjang sabuk konveyor: 5.700 mm, Perlengkapan: Penandaan CE, Tanpa harga minimum – dijual pasti kepada penawar tertinggi! DETAIL TEKNIS Lebar benda kerja maks.: 800 mm Panjang benda kerja min.: 140 mm Dksdjxxafbepfx Ahuok Panjang benda kerja maks.: 2.000 mm Panjang konveyor: 5.700 mm DETAIL MESIN Dimensi (P x L): 5.700 x 1.000 mm PERLENGKAPAN Pengembalian bagian untuk mesin pelapis tepi sebelah kiri Pelepasan panel ke meja dengan tirai udara Penggerak panel dengan karpet bermotor Penandaan CE