Beli Comer L-25-A bekas (100.809)

Kondisi: bekas, Tahun pembuatan: 2003, 872394873 Kdjdoy I Dg Rjpfx Acien

Kondisi: baru, *Technical Specification: -Air-cooled, 25.5 kW rated at +10°C supply temperature at an ambient temperature of +32°C -Temperature range supply: +5°C to +30°C (Optional lower temperatures down to -5°C possible) -Air volume: 8,000 m³/h -Max. air inlet temperature: +30°C -Optional heating capacity up to 24 kW Ksdpfx Asg Ewwrociodn *Pumps: -Delivery rate up to 150 l/min -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -Unladen weight: approx. 480 kg -Process medium connection: DN 32 internal thread *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -SBC-T control and regulation unit -Display for setpoint and actual value, alarm indicator -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve in accordance with DIN EN 378 -Power control -Frost protection monitoring -Flow monitoring -Grill cover over condenser -Oil sump heating -Drain facility -Level monitoring via float magnetic switch -Installed dirt trap in return line of process medium -Bypass valve between supply and return as pump protection, factory set -High and low pressure limiter according to DIN EN 378 -Stainless steel tank, capacity: 80 litres, open system, fully insulated -Self-supporting housing with castors, mobile -System for indoor installation -Control cabinet IP 54 Other performance classes available on request. Visit our homepage for more details. *This unit complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requirements deviating from the standard are shown in quotations or order confirmations.

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 775 Ah, tegangan baterai: 48 V, tinggi total: 782 mm, panjang total: 1.220 mm, lebar total: 424 mm, Tested forklift battery for your truck – 48V 5PZS 775Ah – DIN C + 1 year warranty + incl. Aquamatic system + incl. end discharge device & REMA 320 plug (alternative plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 424 mm Height: 782 mm Weight: approx. 1,150 kg Kdsdpfsy Rnn Djx Acijn Suitable for the following models and others: Atlet REACH TRUCK Atlet UHD 250 Atlet UHS Atlet UMS 160 Atlet UND 140 Atlet UNS 200 Caterpillar N Caterpillar NR16N2H Caterpillar NR16NH Caterpillar NR20N2H Caterpillar NR20NH Caterpillar NR20NHA Caterpillar NR25N2X Caterpillar NR25NH Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5260 Crown ESR 5260-1.4 Crown ESR 5280 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Hyster R1.0 Hyster R1.4 Hyster R1.4H Hyster R1.6 Hyster R1.6HD Hyster R2.5 Jungheinrich ETV Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETW 216 Linde A (1250) – 5022-00 Linde A – 5224-00 Linde R 14 – 1120-00 Linde R 14 – 1120-00 – front change Linde R 14 G – 1120-00 – front change Linde R 14 HD – 1120-00 Linde R 14 HD – 1120-00 – front change Linde R 16 – 1120-00 Linde R 16 – 1120-00 – front change Linde R 16 – 115-00 Linde R 16 AS – 1120-00 – front change Linde R 16 AS 1270 – 1120-00 Linde R 16 G – 1120-00 – front change Linde R 16 HD – 1120-00 Linde R 16 HD – 1120-00 – front change Linde R 16 S – 115-00 Linde R 16 S ACTIVE – 115-12 Linde R 20 – 1120-00 Linde R 20 – 1120-00 – front change Linde R 20 – 115-00 Linde R 20 G – 1120-00 – front change Linde R 20 HD – 1120-00 – front change Linde R 20 W – 1120-00 – front change Linde R 25 – 1120-00 Linde R 25 – 115-00 Linde R 25 F – 8923-00 Linde R 25 W – 1120-00 – front change Mitsubishi RB14 Mitsubishi RB14-25 Mitsubishi RB14N Mitsubishi RB16 Mitsubishi RB16NH Mitsubishi RB25N2X Still FM 14 Still FM 17 Still FM 20 Still FM-4W 25 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Still FM-X 25 Yale MR 16 Common battery sizes available, please inquire. Transport available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: P0220118, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 9 t, jumlah silinder: 6, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.300 mm, tinggi benda kerja (maks.): 200 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Panjang benda kerja maks.: 2.500 mm Lebar benda kerja maks.: 1.300 mm Tinggi benda kerja maks.: 200 mm Jumlah silinder: 6 Kodpfxsy Akuko Aciedn Total tekanan kerja: 90.000 N Tekanan kerja: 294.200 N/m² DETAIL MESIN Dimensi & berat Dimensi (P x L x T): 3.000 x 2.070 x 1.670 mm Berat kosong: 4.000 kg PERLENGKAPAN Penandaan CE

Kondisi: bekas, jarak tempuh: 16.757 km, daya: 168 kW (228,42 hp), pendaftaran pertama: 02/1990, berat keseluruhan: 13.500 kg, jenis bahan bakar: diesel, warna: oranye, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: mekanis, lebar total: 2.500 mm, tinggi total: 3.200 mm, Perlengkapan: ABS, penggerak semua roda,

Kondisi: sangat baik (bekas), FORMAT and EDGE-BANDING LINE for SINGLE-SIDED POSTFORMING OPERATIONS (FOR DIRECT PROCESS) Consisting of the following machines: A) Double-sided gantry feeding system “TREVISAN” with motorized roller conveyor B) HOMAG single-sided POSTFORMING MACHINE FOR DIRECT PROCESS Mod. Profi VFL79/3/P/A - Max. laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit, 2.2 kW (for top grooving) - 02° Hogging unit, 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit, 6.6 kW (for rebate milling from above), motor shaft for hydro clamping - 04° Standard milling unit, 6.6 kW (for rebate milling from below) 0° - 120° (with hydro clamping) - 05° Radius milling unit, 0.7 kW (for profiling corners) - 06° Milling unit for top layer at U-profiles, HSK25, 1.85 kW - 07° Universal milling unit UF 11, 4 kW (for grooving or rebating) Kodpfx Acenzhxqeiedn - 08° Milling unit, 2.2 kW (for chamfer and laminate flap milling above) - 09° Milling unit, 2.2 kW (for bottom bending groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 – 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° – 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate break-outs) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for max. workpiece thickness 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Roll cutter above - 18° Milling unit above, 1 x 0.55 kW, 0° – 30° - 19° Polishing unit above with oscillation, 1 x 0.25 kW C) Double-sided gantry stacking system “TREVISAN” with motorized roller conveyor

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 EDGE PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Kodpfx Aeuhv R Dscijdn Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 250 batang, panjang selang tekanan tinggi: 10.000 mm, bahan bakar: super 95, berat keseluruhan: 56 kg, masa garansi: 24 bulan, en_001 Ksdpfx Aowiwv Ijciedn

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 44 kW (59,82 hp), jenis bahan bakar: diesel, berat operasi: 6.900 kg, Tahun pembuatan: 1995, jam operasional: 2.700 h, Liebherr L508 / FUG 93 Wheel Loader Year of manufacture: 1995 2,700 operating hours Approx. 6,900 kg 44 kW Deutz 4-cylinder engine 3rd hydraulic circuit Kdodpfewxtnrsx Acisn 25 km/h road approval Transport dimensions: 5.85 x 2.0 x 2.85 m

Tahun pembuatan: 1981, Kondisi: bekas, Hydraulic power unit, hydraulic pump, hydraulic pump - Max. flow rate: 25 l/min - Hydraulic tank: mm - Motor: kW rpm - Hydraulic valve - Pressure relief valve - Pressure gauge Kjdechp Azopfx Acisdn - Filter - Dimensions: 500/800/H850 mm - Weight: 248 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 8.927 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.680 mm, pengangkatan bebas: 1.394 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.174 mm, lebar kerangka garpu: 1.150 mm, panjang garpu: 1.200 mm, jenis penggerak: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished, no warranty Technical condition: Good Front tyres, type: Non-marking Front tyres, size: 23x9-10 Front tyres, condition: 60 - 80% Rear tyres, type: Non-marking Rear tyres, size: 200-50-10 Rear tyres, condition: 60 - 80% Battery voltage: 80V Battery capacity: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection including inspection booklet. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to offer you attractive terms for leasing, financing, or delivery. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. Operating hours stated are as per readings at the time of listing. Subject to prior sale, changes, and errors. Kdedpoym Enxjfx Acion Side shifter, fork positioner, Kaup fork positioner with separate side shifter 3rd valve, 4th valve, rear work light, front work light, full free lift, safety light, LED,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg - Motor drive for roller conveyor: 0.37 kW - Motor drive for stop ruler: 0.37 kW - Motor drive for electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm Kdedjw Ec Iuepfx Acijn - Weight: 2600 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Two vertical Bosch form-fill-seal machines are available. 1) Bosch SVB 2501 A - Year of manufacture: 1993 - Bag type: Pillow bag - Bag weight: 250g/500g - Bag length range: 80 mm - 250 mm - Max. output: 40 cycles/min - Power consumption: 3 kW - Machine dimensions (L/W/H): approx. 1300 mm / 2500 mm / 1700 mm - Weight: approx. 1,100 kg - Incl. clip unit PS mako BS 600-CSP, year of manufacture: 2015 Ksdpfx Aeu Rc R Sociedn 2) Bosch SVB 3601 L - Year of manufacture: 1996 - Bag type: Pillow bag - Bag weight: 250g/500g - Max. bag length: 400 mm - Bag width range: 80 mm - 360 mm - Max. production speed: 40 cycles/min - Incl. clip unit PS mako BS 600-CSP, year of manufacture: 2015 Documentation available. On-site inspection possible. Expected to be available from mid-January 2025.

Kondisi: baik (bekas), jarak tempuh: 71.000 km, daya: 188 kW (255,61 hp), pendaftaran pertama: 06/1986, jenis bahan bakar: diesel, berat kosong: 13.295 kg, berat keseluruhan: 14.000 kg, bahan bakar: diesel, tipe perpindahan gigi: mekanis, jam operasional: 1.225 h,

Kondisi: baik (bekas), jarak tempuh: 71.000 km, daya: 188 kW (255,61 hp), pendaftaran pertama: 06/1986, jenis bahan bakar: diesel, berat kosong: 13.295 kg, berat keseluruhan: 14.000 kg, bahan bakar: diesel, tipe perpindahan gigi: mekanis, jam operasional: 1.225 h,

Kondisi: bekas, Hydraulic Scissor Lift Table TREPEL - L. A. VAN EIJLE & Co. Year of manufacture: approx. 1980 Load capacity: approx. 5 tons Platform size: 1700 x 1100 mm Lift height (max.): 515 mm Table height when lowered with rail wheels: 535 mm Table height when lowered without rail wheels: 480 mm Table height when raised with rail wheels: max. 1050 mm Table height when raised without rail wheels: max. 995 mm Travel speed of rail carriage: approx. 8.5 m/min Motor power: 4 kW Kedpjd I Nrpsfx Aciedn Power supply: 400 V, 50 Hz - Pendant control for up/down operation - Safety limit switch - Hydraulic unit with reservoir integrated in the base frame - Scissor lift equipped with two lift cylinders - The table is rail-mounted and movable, fitted with 4 wheels on the base frame, Ø 200 mm - Rail wheels driven by SEW geared motor and chain Required space (L x W x H): 2070 x 1350 x 1050 mm Net weight: approx. 1.3 tons Good condition

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: MBMA13+25, en-GB-Technische Daten: 1x Demag KBK 100 column-mounted slewing crane, SWL 125 kg with chain hoist Safe working load at maximum outreach: 125 kg / 0.125 t Height: approx. 3 m Underside of jib: approx. 2.65 m Outreach: 3 m Hook height: approx. 2.15 m Total weight: approx. 350 kg Fitted with 125 kg Demag DK chain hoist Includes pins, cable trolley, travel trolley, end cap, etc. Crane available in quantity: 2 units Slewing range: 300°; Connection: 400V, 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim, Germany Additional cranes available (load capacities 80–5000 kg), please enquire Kdedpfxjrhzh Ss Acien See photos Shipping via freight forwarder or collection by appointment only

Kondisi: baik (bekas), 25 linear meters of tire racking Used equipment, in very good condition, see pictures Height: 2.5 m Depth: 50 cm Bay load: 9,000 kg Beam length: 2.1 m Beam load capacity per level: 1,000 kg Negotiable price: €1,950 net ex stock Offer includes: + 12 assembled frames, 9 t bay load, depth 50 cm, height 2.5 m + 66 beams, length 2.1 m, 1,000 kg load per level + 132 locking pins + 24 concrete anchors + Load capacity signs Alternative configurations available upon request! Goods are in stock. Transport and installation available on request. Kdodpfx Acefdik Ieijn Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Specifications, details and prices subject to change or error; interim sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale: We are constantly seeking and offering numerous items from a wide range of sectors: – Broom-clean site clearances – Company liquidations – Fast – flexible – efficient! – We also clear and/or dispose for insolvency administrators. Just email us a few key details and we will get back to you promptly. To visit our page, please click on our logo!

Kondisi: bekas, We offer used pallet racking systems for sale. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment pitch: 70/70 mm Colour: blue Uprights are pre-assembled (bolted lattice structure) Kodjy Dgdqopfx Aciedn Beam width: 2,830 mm (clear width) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Shelf load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 uprights + 10 beams) Extension bay: €382.55 net (1 upright + 10 beams) VOLUME PRICES Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay 51+ units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay 51+ units: €336.64 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is quoted per unit/net price or as described in the listing (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in new and used warehouse logistics products, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and crafts. We continually offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us.

Kondisi: bekas, We are offering used pallet racking systems here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustable pitch: 70/70 mm Colour: blue The frames are pre-assembled (bolted truss design) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Bay load: 3,000 kg per beam pair PRICES Starter bay: €595.10 net (2 frames + 10 beams) Add-on bay: €382.55 net (1 frame + 10 beams) Ksdpey Dgdwjfx Acijdn VOLUME DISCOUNTS Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Add-on bay 1 - 5 units: €382.55 net Add-on bay 6 - 20 units: €367.25 net Add-on bay 21 - 50 units: €351.95 net Add-on bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customised quotation based on your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price is given per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US The company DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveying technology, mezzanine floors, textile storage as well as machines for trade, industry and skilled crafts. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Kondisi: bekas, We are offering used pallet racking here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustable increments: 70/70 mm Colour: blue The uprights are pre-assembled (bolted latticework) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Shelf load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) BULK PRICING Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We would be pleased to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is per unit/net price or as specified in the description text (plus VAT). You will of course receive an invoice with VAT shown separately. Kdedsy Dgcyspfx Acisn ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and crafts. We continuously offer you attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.

Tahun pembuatan: 1992, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: Div1, Demag KBK 1 column-mounted slewing crane NL 125KG with chain hoist Technical Specifications: Payload at full outreach: 125KG / 0.125t Height: approx. 3.5m Underside of jib: approx. 3m Jib outreach: approx. 4m Hook height: approx. 2.55m Total weight: approx. 450Kg Kjdsng H T Uepfx Acisdn Fitted either with steel or Demag chain hoist 125Kg, depending on stock Including pins, cable trolley, travelling gear, end cap, etc. Multiple cranes in stock Slewing range: 300°, 400V 16A connection Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, load capacities from 80 to 5000Kg, please enquire See pictures Shipping via freight forwarder or collection by appointment only

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 500 Ah, tegangan baterai: 80 V, tinggi total: 627 mm, panjang total: 1.025 mm, lebar total: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1-year warranty + Including Aquamatik watering system + Including end connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol provided on delivery) + Year of delivery: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLACH - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Kdjdpfoy Rnr Ajx Acien Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes available, please inquire. Transport possible.

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 620 Ah, tegangan baterai: 80 V, tinggi total: 784 mm, panjang total: 1.025 mm, lebar total: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 620Ah - DIN A + 1 year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 plug (other plugs can be installed upon request) + Capacity: min. 90-100% (C5 capacity test report included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,500 mm Width 708 mm Height 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Kdsdpjy Rnrijfx Acien Nissan QX25 Common battery sizes available – please enquire. Transport possible.

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: WD750/9, Technical Data: 1 Vetter / Demag column-mounted slewing crane SWL 250KG with Demag chain hoist Model AS2,5-3 Safe Working Load at full outreach: 250 KG / 0.25 t Height: approx. 3.95 m Underside of jib: approx. 3.7 m Outreach: approx. 3.2 m Hook height: approx. 3.3 m Total weight: approx. 800 kg including anchor plate (630 mm) Kodpovv Npzsfx Aciodn with Demag DC chain hoist 250 kg Slewing range: 270°, connected to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, lifting capacity 80–5000 kg, please inquire See pictures Shipping by freight forwarding company or collection only by appointment