Beli Cronosstech Hpb 6100X400 bekas (152)

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 700 mm, panjang meja: 1.200 mm, kedalaman tenggorokan: 370 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH C-Frame Eccentric Press 300 Ton An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism. It is used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Frame Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production environments. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement via central automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal mode Application Areas - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Two-hand/foot pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic lock system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener Dodpfjx N Nfhox Aatjwb • One set of dies as per requested specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 tons Throat depth: 370 mm Table–ram distance: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (regulation): 150 mm Approx. press width: 2000 mm Approx. press depth: 2700 mm Approx. press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamp slot diameter: Ø60 mm Ram size: 780×400 mm Table height from ground: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approx. weight: 13,200 kg Note: Please inform us if you require any modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), gaya penekanan: 250 t, panjang langkah: 160 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, kedalaman tenggorokan: 350 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, excentric-press; an excentric mechanism-powered type of mechanical press used in cold forming operations such as punching, cutting, and die shaping. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-oriented design (light curtain + safety systems) Low maintenance with central automatic lubrication PLC control + dual hand/foot pedal operation for production-ready use Applications Cold cutting and punching operations Cold extrusion applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel fabricated frame • Four-point slide guidance • Nodular cast iron connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Central automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor function • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per request • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Tons Throat depth: 350 mm Table–ram distance: 520 mm Slide–table distance: 630 mm Distance between side walls: 520 mm Ram adjustment (shut height): 150 mm Approx. press width: 2000 mm Approx. press depth: 2500 mm Approx. press height: 3100 mm Front anchorage size: 930 mm Side anchorage size: 1430 mm Table hole diameter: Ø250 mm Table size: 700×1100 mm Die clamping hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: Please contact us if you require alterations in technical specifications. Dwedpfx Aox N Nfbeateb ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2024, Diameter pipa (maks.): 65 mm, Sudut pembengkokan (maks.): 190 °, radius pembengkokan (maks.): 250 mm, panjang total: 4.950 mm, lebar total: 1.250 mm, tinggi total: 1.600 mm, masa garansi: 12 bulan, tebal plat aluminium (maks.): 3 mm, ketebalan pelat baja (maks.): 3 mm, MAXIMUM CAPACITY : Ø65X3MM MAXIMUM BENDING RADIUS : 250MM BENDING ANGLE : 190 DEGREES WORKING LENGTH : 3000MM MOTOR POWER : 15.5KW LENGTH : 4950MM WIDTH : 1250MM HEIGHT : 1600MM BENDING SPEED : VARIABLE STANDARD FEATURES Custom bending die according to customer specifications Servo-driven feed axis Servo-driven rotation axis Automatic detailed operation report via e-mail Servo bending axis (SFB 38-CNC/R1) Reducer-driven bending system (51-65-76-90) Mobile CNC control unit with 21” color display 3D bending simulation Daily, weekly, and monthly total production display Total raw material length calculation Estimated bending process time calculation X-Y-Z data conversion to Y-B-C Remote assistance capability Portable foot pedal with emergency stop Manual – Automatic bending modes With or without mandrel bending Safety sheet with switch at the rear of the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic back stop Dwedpfx Aou Hi Rqsatob Hydraulic oil cooler Hydraulic linear slider system Hydraulic chuck Electrical cabinet safety lock and panel lock with key Electrical panel cooler Overload protection

Kondisi: baru, Tahun pembuatan: 2024, Diameter pipa (maks.): 90 mm, Sudut pembengkokan (maks.): 190 °, radius pembengkokan (maks.): 250 mm, panjang total: 5.800 mm, lebar total: 1.550 mm, tinggi total: 1.750 mm, masa garansi: 12 bulan, tebal plat aluminium (maks.): 4 mm, ketebalan pelat baja (maks.): 4 mm, MAXIMUM CAPACITY : Ø90X4MM MAXIMUM BENDING RADIUS : 250MM BENDING ANGLE : 190 DEGREES WORKING LENGTH : 4000MM MOTOR POWER : 27.5KW LENGTH : 5800MM WIDTH : 1550MM HEIGHT : 1750MM BENDING SPEED : VARIABLE STANDARD FEATURES One set of bending dies per customer’s specification Dwjdpfsu Hiu Asx Aateb Servo Motor Driven Feeding Axis Servo Motor Driven Rotating Axis Automatic Sending of Detailed Work Reports by Email Servo Bending Axis (SFB 38-CNC/R1) Gearbox-Driven Bending System (51-65-76-90) Mobile 21” Color Touchscreen CNC Control Unit 3D Bending Simulation Display of Daily, Weekly, and Monthly Total Production Amounts Calculation of Total Material Length to be Used Estimation of Bending Cycle Time Conversion of X-Y-Z Data to Y-B-C Remote Assistance Portable Foot Pedal with Emergency Stop Manual – Automatic Bending Modes Mandrel – Non-Mandrel Bending Switch-Guarded Safety Plate behind Bending Head Automatic Mandrel Lubrication System (SFB 38 CNC/R1) Hydraulic Clamping Hydraulic Mandrel Hydraulic Backstop Hydraulic Oil Cooler Hydraulic Linear Slider System Hydraulic Collet Electrical Panel Safety Lock and Keyed Panel Lock Electrical Panel Cooler Overload Protection

Kondisi: baru, Tahun pembuatan: 2024, Diameter pipa (maks.): 76 mm, Sudut pembengkokan (maks.): 190 °, radius pembengkokan (maks.): 250 mm, panjang total: 5.800 mm, lebar total: 1.550 mm, tinggi total: 1.750 mm, masa garansi: 12 bulan, tebal plat aluminium (maks.): 4 mm, ketebalan pelat baja (maks.): 4 mm, MAXIMUM CAPACITY: Ø76x4 mm MAXIMUM BENDING RADIUS: 250 mm BENDING ANGLE: 190 degrees WORKING LENGTH: 4000 mm MOTOR POWER: 23 kW LENGTH: 5800 mm WIDTH: 1550 mm HEIGHT: 1750 mm BENDING SPEED: Adjustable Dedpfxou Hix Is Aatswb STANDARD FEATURES One set of bending dies manufactured to customer-specified dimensions Servo motor-driven feed axis Servo motor-driven rotation axis Automatic emailing of detailed work reports Servo bending axis (SFB 38-CNC/R1) Gearbox-driven bending system (51-65-76-90) 21” mobile CNC control unit with color display 3D bending simulation Display of total daily, weekly, and monthly production quantities Calculation of total required material length Estimated bending cycle time calculation X-Y-Z data conversion to Y-B-C coordinates Remote support capabilities Portable foot pedal with emergency stop Manual – Automatic bending modes Mandrel and non-mandrel bending Safety cover with switch located behind the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electrical panel safety lock and lockable main switch Electrical panel cooler Overload protection

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 500 mm, lebar meja: 500 mm, panjang meja: 600 mm, kedalaman tenggorokan: 250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 40 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance in both workshops and production lines with its compact design, robust frame, and precise operating capability. Key Advantages - Rigid, vibration-free frame structure - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - European standard hydraulic and electrical equipment - Long service life and low maintenance cost Dwjdpsyzb Dgjfx Aatob Applications - Metal forming - Deep drawing and flow forming operations - Cutting and punching operations - Assembly and pressing applications - Automotive and ancillary industries Standard Features - Stress-relieved steel construction frame via vibration method - PLC control and touch screen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN norms (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 40 Press Force: 40 Ton Stroke: 500 mm Throat Depth: 250 mm Table – Ram Distance: 600 mm Table Size: 500 x 600 mm Press Depth: 1050 mm Press Width: 500 mm Table Height from Floor: 850 mm Total Height: 2400 mm Main Cylinder Diameter: Ø145 mm Motor Power: 5.5 kW Weight: 4500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 80 t, panjang langkah: 600 mm, lebar meja: 600 mm, panjang meja: 800 mm, kedalaman tenggorokan: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, drawing, cutting, and assembly processes. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance in medium and heavy-duty applications with its robust frame, high capacity, and precise operation capabilities. Key Advantages - Rigid, vibration-free steel construction frame - High precision (≤120 micron/meter) - PLC controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life, low maintenance costs Applications - Metal forming - Deep drawing and forming operations - Cutting and punching - Assembly and pressing - Automotive manufacturing and supplier industry Standard Features - Stress-relieved steel construction frame using vibration method - PLC control and touchscreen panel - Argon welding applications - Certified welding (EN ISO 15614-1 / 2017), WPQR & WPS approved - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Dwedpeyzb Dtsfx Aatjb Technical Specifications – CHCP 80 - Press Force: 80 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Overall Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 200 t, panjang langkah: 800 mm, lebar meja: 750 mm, panjang meja: 1.000 mm, kedalaman tenggorokan: 400 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production environments with its high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction - Stabilized operation with vibration-dampened structure - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Areas of Application - Heavy-duty metal forming - Deep drawing and metal spinning operations - High-tonnage pressing with dies - Cutting and punching operations - Automotive, defense, and heavy industry Dodpfx Asyzb Edoatewb Standard Features - Stress-relieved, welded steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in accordance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerances compliant with ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Ton - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 60 t, panjang langkah: 500 mm, lebar meja: 600 mm, panjang meja: 800 mm, kedalaman tenggorokan: 250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable and stable performance in both workshops and production lines thanks to its compact design, robust frame, and precise operating capability. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - Hydraulic and electrical components meet European standards - Long service life and low maintenance cost Applications - Metal forming - Deep drawing and forming processes - Cutting and punching operations - Assembly and pressing operations - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - Certified welding (EN ISO 15614-1 / 2017, WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤ 120 micron/meter) - Hydraulic system by PARKER or REXROTH - Electrical components by SIEMENS / SCHNEIDER - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Pressing Force: 60 Ton - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 600 x 800 mm Dwjdpfx Aoyzb Dmjatob - Press Depth: 1150 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new, unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 100 t, panjang langkah: 600 mm, lebar meja: 650 mm, panjang meja: 850 mm, kedalaman tenggorokan: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH-manufactured CHCP 100 C-Frame Hydraulic Press is designed for heavy-duty production applications, offering high tonnage capacity, a robust structural frame, and precise operational capability. Key Advantages - Rigid, vibration-free welded steel construction - High precision (≤120 microns/metre) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Application Areas - Metal forming - Deep drawing and stamping operations Dsdpfsyzb Dyex Aatowb - Cutting and punching - Assembly and pressing operations - Automotive industry and suppliers Standard Features - Welded steel frame stress-relieved by vibration method - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance to ISO & DIN standards (≤ 120 microns/metre) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 - Press Capacity: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm - Overall Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Production Location: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2026, daya: 18,5 kW (25,15 hp), gaya penekanan: 150 t, panjang langkah: 700 mm, lebar meja: 700 mm, panjang meja: 1.000 mm, kedalaman tenggorokan: 350 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 150 Ton C-Type Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 150 C-Type Hydraulic Press, manufactured by CRONOSSTECH, has been engineered for heavy-duty and continuous production applications, featuring a high tonnage capacity, reinforced frame structure, and precision performance. Key Advantages - High-strength, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Suitable design for heavy-duty operation - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and forming operations - Mould pressing applications - Cutting and punching operations - Automotive and sub-industries Standard Features - Stress-relieved steel frame construction through vibration method - PLC control and touch panel - Argon welding applications - Certified welding per EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and squareness tolerance compliant with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 - Press Force: 150 Ton - Stroke: 700 mm - Throat Depth: 350 mm - Table – Ram Distance: 800 mm - Table Size: 700 x 1000 mm - Press Depth: 1400 mm - Press Width: 700 mm - Table Height from Floor: 950 mm - Total Height: 2800 mm - Main Cylinder Diameter: Ø250 mm - Motor Power: 18.5 kW - Weight: 10,500 kg Dwjdpeyzb D Hsfx Aateb General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: listrik, jumlah rol: 3, diameter roller (bawah): 190 mm, diameter rol atas: 190 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, daya: 4 kW (5,44 hp), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty jobs. It is particularly suitable for rolling materials up to 10 mm in thickness. Common applications include working with aluminum materials, manufacturing ventilation ducts, advertising panels, machine bodywork and sheet metal components, among many other similar tasks. All models are driven by planetary gearbox High-strength shafts made from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable upper roll Movable control panel Cone bending roll Centralized lubrication system Precise bending capability with braked motor and planetary gearbox Motorized rear roll with vertical up/down movement Upper roll support system Compliant with EU Safety Directives (CE Certificate) Dodpfjx D Dfvjx Aatowb Operating manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for fitting profile and pipe bending rolls Profile and pipe bending roll set Motorized bottom roll with vertical movement Delrin-sleeved upper roll for Alucobond bending Adjustable speed in steps NC Control TECHNICAL SPECIFICATIONS Bending Length : 2550MM Pre-bending : 4/5MM Bending Capacity : 5/6MM Upper & Lower Roll Diameter : 190MM Min. Bending Diameter : 285MM Main Motor Power : 4 KW Rear Motor Power : 1.5 KW Length : 4700MM Width : 950MM Height : 1300MM Weight : 3400KG

Kondisi: baru, Tahun pembuatan: 2025, Diameter pipa (maks.): 60 mm, radius pembengkokan (maks.): 200 mm, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS Dwodevn Euqjpfx Aatsb Steel tube capacity: 60 x 3 mm Easy one-touch control allows any operator to program and automatically save the bending angle Single bending speed Start the bending cycle from the control panel or the integrated foot pedal Designed on a portable, wheeled cabinet with handles for easy transport.

Kondisi: baru, Tahun pembuatan: 2025, Diameter pipa (maks.): 76 mm, radius pembengkokan (maks.): 200 mm, PLACE OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS Steel tube capacity: 76 x 3 mm Maximum: 200 mm Capability to bend to small CLR up to 2 x Ø Touchscreen programming of bending angle with multilingual system diagnostics Quick-change tooling system Digital display of bending angle Material spring-back compensation Foot pedal control for hands-free operation Dwsdpevn Euwofx Aatob

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Dwedpsvtx Inofx Aatsb Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 130 t, lebar meja: 750 mm, panjang meja: 1.000 mm, gaya punching: 130 t, lubang tembus di meja: 220 mm, diameter silinder: 55 mm, penyesuaian langkah: 140 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated via an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in mass production Operator safety-oriented design (light curtain + safety systems) Low maintenance requirements with centralized automatic lubrication Production-ready operation with PLC control + dual hand/foot control Fields of Application Cold cutting and punching operations Cold breaking applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-sided guided ram • Spheroidal graphite cast iron connecting rod and gearboxes • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Complies with CE safety directives Dsdpovtyvgofx Aatjwb • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die set as per request • 8-guideway slide system ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Ton Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between side frames: 450 mm Ram adjustment (stroke setting): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring length: 790 mm Side anchoring length: 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), ketinggian potong (maks.): 1.100 mm, lebar pemotongan (maks.): 1.600 mm, masa garansi: 12 bulan, STANDARD FEATURES - Independently operated dual hydraulic vises - Linear rapid descent system - Variable blade speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table traverse system - Safety switches - Chip conveyor - Motorized chip brush - 1 piece band saw blade - 24 months mechanical, 12 months electrical warranty Dwedpovvcp Ujfx Aatjb - Country of origin: Turkey TECHNICAL SPECIFICATIONS CUTTING CAPACITY ROUND (MM): 1100 CUTTING CAPACITY SQUARE (MM): 1100X1100 CUTTING CAPACITY RECTANGULAR (MM): 1100X1600 BLADE SIZE (MM): 67X1.6X11630 BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 7.5 HYDRAULIC MOTOR (KW): 1.5 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 535 MACHINE DIMENSIONS (MM): 5390X1760X2875 WEIGHT (KG): 8000 WE MANUFACTURE STRAIGHT AND MITRE CUTTING MODELS FROM 220MM UP TO 3000MM. FOR FURTHER INFORMATION, PLEASE CONTACT US.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, lebar meja: 720 mm, panjang meja: 1.000 mm, lubang tembus di meja: 220 mm, penyesuaian silinder hidrolik: 120 mm, penyesuaian langkah: 125 mm, Perlengkapan: penghadang cahaya keselamatan, MANUFACTURING LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded components by vibration - Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram with 8 slide guides - Ram cushioning cylinder - Ram, connecting rod, and clutch parts made of GS52 steel casting - High strength single piece crankshaft – 4140 - Bronze insert in connecting rod (Zr14) - Rear-mounted flywheel - Spare bolster table - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with catch and dual hand control with time delay - Electrically controlled counter - PLC control with touch screen – DELTA - Electrical switchgear components: SIEMENS-SCHNEIDER - CE conformity (optional) - Finger protection light curtains – SICK, LEUZE - Safety PLC (controls all electrical system, valve, hand and foot controls) – PILZ - Dual coil safety valve – GPA, TOPAIR - Lockable position switch and panel - Safety block - Protective guards as per CE regulations TYPE: D-TYPE MONOBLOC BODY Capacity: 150 Tons Distance Table-to-Ram: 500 mm Distance Between Side Walls: 1080 mm Ram Adjustment: 120 mm Dwodjvyrywspfx Aateb Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 / 1000 mm Die Mounting Slot Diameter: 55 mm Ram Size: 450 / 800 mm Height Table-to-Floor: 900 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Kondisi: baru, Tahun pembuatan: 2025, panjang langkah: 300 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 95 mm/dtk, produsen pengendali: ESA - DELEM - Cybelec, lebar kerja: 3.100 mm, gaya tekuk (maks.): 100 t, jarak antara penyangga: 3.345 mm, jenis kontrol: Kontrol CNC, jumlah sumbu: 4, jenis aktuasi: listrik, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Tons (E100 Model) STANDARD FEATURES - CNC controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes) - CNC control unit (ESA S830 – 10” color touchscreen, 2D graphic display) - Automatic bending calculation and collision prevention functions - High-precision synchronized servo drive system - Belt-driven upper beam movement system, oil-free and low maintenance - Spring-supported upper beam design supporting energy recovery - O-frame construction for minimum deformation - 300 mm stroke - 410 mm throat depth - Servo motorized backgauge system (X + R axes) - Backgauge accuracy: ±0.03 mm - Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm - Hardened ball screws and linear guides - 2 three-position backgauge fingers - European style upper die holder – quick-release (Promecam type) - European style narrow lower table - Standard upper die (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4 V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED work area lighting - Sliding front support arms - Dual foot pedals - Emergency stop buttons - Safety equipment in accordance with CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel increased to 1000 mm - Motorized crowning system - Hydraulic upper and lower die clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light barrier - CNC controlled sheet support arms - Laser bending line - Laser angle measurement system - Automatic angle measuring systems - Air-conditioned cooling system for electrical cabinet - Additional backgauge fingers - Custom die and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons Dwedex Nqukepfx Aatob - Bending length: 3100 mm - Distance between side frames: 3345 mm - Stroke: 300 mm - Throat depth: O-frame construction - Open height (between upper/lower jaws): 515 mm - Table height: 900 mm Speeds - Down speed: 95 mm/s - Bending speed: 10 mm/s (in compliance with CE) - Return speed: 95 mm/s Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/s - R axis speed: 100 mm/s - Z axis speed: 600 mm/s General - Main motor power: 2 × 5.5 kW - Machine weight: approx. 7,500 kg - Machine dimensions (LxWxH): approx. 4600 × 2000 × 2650 mm

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 200 mm, lebar meja: 1.100 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety even with large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production environments. Key Advantages - Stable operation with large dies due to 2000×1100 mm table size - Die/equipment protection with hydraulic overload safety device - 8-point guided ram + counterbalance piston for precise guidance - Controlled, user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application Areas - Punching/cutting/forming operations requiring large table sizes - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel body construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD • Reverse motion motor • Hydraulic overload protection • Motorized ram adjustment mechanism Dwjdpfx Aex N Rwroatsb • Light curtain safety system • Enclosed oil sump with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press powered by force transmitted through an eccentric mechanism, used in cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, owing to their rigid frame construction. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it offers dependable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety - Precise guidance provided by 8-point guided ram + balancer piston - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety through light curtain protection Applications - Punching/cutting/forming processes requiring large tables - Mass production with automated feeding lines - Heavy die and high tonnage manufacturing processes ✅ STANDARD FEATURES Dsdpfxox N R Ahs Aatjwb • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke with a single connecting rod • Balancer piston on the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Reverse motor function • Hydraulic overload safety device • Motorized ram adjustment • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover at the front of the table • Dies manufactured to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 600 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press that operates with force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety in large table and heavy die applications, thanks to their rigid frame structures. The CRONOSSTECH CEHP 600 – H Type Eccentric Press 600 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance for continuous production conditions. Key advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection via hydraulic overload protection - Precise guidance with 8-point guided ram + balancer piston - Controlled, user-friendly operation via PLC + touch screen - High operator safety with light curtain protection Areas of use - Punching/cutting/forming applications requiring large table size - Mass production with automated feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • T-slotted additional base plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain protection • Gear group in a sealed oil chamber • Double coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover for table front • Custom-designed dies as required ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Dwedsx N R A Ujpfx Aatsb Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Dimension: 2200×1200 mm Ram face size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales operations are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 200 mm, lebar meja: 900 mm, panjang meja: 1.800 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Cam-type Press (Eccentric Press) is a type of mechanical press driven by a force generated through an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety particularly in applications requiring large bolster areas and heavy dies, thanks to their rigid frame construction. CRONOSSTECH H-Type Eccentric Press 150 Tons offers stable operation during high-volume production and is focused on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production environments. Key Advantages Stable operation for large dies with spacious bolster dimensions Die/equipment protection via hydraulic overload protection High-precision guidance with 8-point slide + counterbalance piston Controlled and user-friendly operation with PLC + touch screen Enhanced operator safety with light curtain protection Application Areas Punching/cutting/forming applications requiring large bolster Serial production with automated feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch–brake system • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized slide adjustment mechanism • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at front of bolster • Dies manufactured as per specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TONS) Capacity: 150 Tons Useful area of lower bolster: 900×1800 mm Useful area of upper plate: 900×1800 mm Fixed stroke: 200 mm Nominal material thickness: 7 mm SPM (Strokes Per Minute): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide adjustment): 120 mm Number of connecting rods: 2 units Number of eccentric shafts (cranks): 2 units Safety fuse: Hydraulic Electrical components inside panel: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor-standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Dodpfxex N Ru Dj Aatswb Approximate weight: 20 Tons Note: Please notify us for any changes required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press powered by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H type (straight-side) eccentric presses ensure high stability and process safety in large table and heavy die applications thanks to their rigid frame structures. The CRONOSSTECH CEHP 300 – H Type Eccentric Press 300 Ton is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table dimension - Die/equipment protection via hydraulic overload safeguard - Precise guidance with 8-point guided ram and balancer piston - Controlled and user-friendly operation with PLC + touch screen - Enhanced operator safety via light curtain protection Dwsdjx N Rxvopfx Aatsb Application Areas - Punching/cutting/forming applications requiring large table - Series production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse motion • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain protection • Enclosed gear set in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover for front of table • Dies as per request/specification ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2750 mm Press Height: 4700 mm Table Dimension: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process safety for applications involving large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton is designed for stable operation in high-volume production with a focus on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages Dwodpfox N Rzwsx Aatjb - Stable operation with large dies thanks to a 2000×1200 mm table - Die/equipment protection with hydraulic overload safety - Precision guidance with 8-guided ram + counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen - Enhanced operator safety with light curtain protection Applications - Punching/cutting/forming operations requiring large tables - Mass production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorised reverse motion • Hydraulic overload safety • Motorised ram adjustment mechanism • Light curtain protection • Sealed oil tank with gear group • Double-solenoid safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material disposal systems • Sliding safety guard in front of the table • Dies built to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 3050 mm Press Depth: 3200 mm Press Height: 4700 mm Table Dimension: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 55 kW Weight: 51,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.