Beli Feichter Ffz 30/60 Cnc bekas (47.345)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, High-pressure cleaning unit, high-pressure flushing system, high-pressure built-in washer mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Comparable to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Unladen weight without water tank: approx. 370 kg Unladen weight with 400 l water tank: approx. 400 kg Unladen weight with 800 l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP Ppedoiky H Sopfx Af Eou - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 HP (19 kW) CONTROL PANEL: - Start button - Hour meter - Electronic fuel level indicator - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM gauge, generator, and glow plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - RPM control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump dry run, with automatic shutdown. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, pressure control valve, and pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½" and 80 m 3/8" high-pressure hose - Hose: 80 m ½" high-pressure hose (included) - Hose guidance: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine on/off; - Bypass on/off; - RPM control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l polyethylene water tank (with steel frame); OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high-pressure hose; - 50, 60, or 80 m 3/8" high-pressure hose with G3/4" connector; ACCESSORIES ON REQUEST: - STORZ kit for connecting to fire hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel, and quick coupling; - High-pressure lance kit with 15° flat jet nozzle / rotating nozzle; - High-throughput lance kit; - Rotating nozzle kit; - Double head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories available on request.

Kondisi: bekas, Tahun pembuatan: 1993, Turning diameter approx. 500 mm Swing diameter approx. 600 mm Travel (X-axis) approx. 400 mm Travel (Z-axis) approx. 600 mm Spindle speeds 2,000 rpm Spindle motor 63 kW Control SIEMENS Control SINUMERIK System 3 Tool turret 1 x 12 positions Total power requirement kW Ppodpfx Aotyp Susf Esu Machine weight approx. 9.3 t Space requirement approx. m - R-version, turret located right of the chuck - Accessories: Hydraulic 3-jaw chuck 400 mm diameter, several tool holders for turret, chip conveyor, coolant system

Kondisi: baik (bekas), Tahun pembuatan: 2012, jenis bahan bakar: listrik, Duplex mast, tanpa sideshift tetapi terdapat circuit kontrol. 13.795 jam kerja; angka dapat berubah sesuai penggunaan. Baterai buatan 2014 direkondisi oleh bengkel profesional pada 2023, termasuk penggantian beberapa sel. 80 V, tinggi angkat 3.300 mm, panjang garpu 1.600 mm. Pengoperasian maju-mundur menggunakan pedal kaki seperti pada Linde. Dengan modul kontrol rusak; saat ini tidak dapat berjalan. Dapat tukar-tambah dengan Still RX 50-13 atau truk Linde E12 yang setara. Podpfx Afeiqpp Sj Eopu

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 3.465 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.890 mm, pengangkatan bebas: 1.550 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.275 mm, panjang garpu: 1.200 mm, jenis penggerak: Elektro, Elektrik Forklift 4 Roda Tipe Mast: Triplex Transmisi: Otomatis Kondisi: Direkondisi ulang tanpa garansi Kondisi Teknis: sangat baik Jenis ban depan: Non Marking Kondisi ban depan: 80 - 100% Jenis ban belakang: Non Marking Kondisi ban belakang: 60 - 80% Baterai Volt: 80V Ppedpjyvl Husfx Af Eou Kapasitas Baterai: 620Ah Tahun pembuatan baterai: 2023 Deskripsi: Harga sudah termasuk pemeriksaan UVV baru, pengecatan sangat bagus (bekas unit sewa Still), baterai tahun 2023 direkondisi dengan Power Cycler termasuk tes Kappa 87% (lihat gambar terakhir), charger cocok dengan colokan, kami siap membantu pengiriman dengan biaya terjangkau. Sewa beli dimungkinkan! Side shifter, katup ke-3, katup ke-4, lampu kerja belakang, lampu kerja depan, pemanas, kabin penuh, full free lift, sertifikat CE, lampu keselamatan.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, tegangan masuk: 400 V, lebar total: 690 mm, panjang total: 940 mm, tinggi total: 1.470 mm, berat kosong: 300 kg, daya: 3 kW (4,08 hp), jenis penyesuaian ketinggian: mekanis, New machine with 24 months warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant power transmission + Includes ingredient chute and stainless steel safety guard + Machine stops immediately when the guard is lifted + Integrated dust and splash protection cover + Stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl raise/lower via lever + Bowl arms made of stainless steel + Enclosed planetary gear drive made of stainless steel + Can also be used optionally with 30-litre equipment + Fast spare parts availability within 1-2 working days Standard accessories included in price: - 1x 60-litre stainless steel bowl - 1x whisk for 60-litre bowl - 1x flat beater for 60-litre bowl - 1x dough hook for 60-litre bowl Special accessories, optionally available at extra cost, prices on request: - Additional 60-litre stainless steel bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 60-litre bowl - 30-litre kit (1x 30-litre stainless steel bowl + 3 tools for 30-litre bowl) Technical data: - Motor power: 3.0 kW - Speed rpm at 50Hz: 165 - 450 (level 1 - 10) Pedpshydl Iefx Af Eepu - Electrical connection: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 690 x 940 x 1470 mm (W x D x H) - Max. 1710 mm height when hood is open - Net weight: 300 kg

Kondisi: bekas, Tahun pembuatan: 1988, tinggi total: 5.200 mm, lebar total: 6.200 mm, panjang total: 6.500 mm, berat keseluruhan: 55.000 kg, daya motor spindle: 30.000 W, 1 Pjdoy S S Nbjpfx Af Eepu

Kondisi: baik (bekas), Various standard and driven tool holders in different versions for VDI 20 + 30 + 40 + 50 + 60 Ppjdpfxobql T Ej Af Eou Please state the required VDI size in your enquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), Maschine zur Herstellung von Druckfedern. Ein Großteil des Schenker-Maschinenprogramms sowie ausgewählte Bamatec-Geräte sind bei uns verfügbar. Ppsdpfx Afef I Uums Esu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 610 mm, kecepatan spindel (maks.): 10.000 rpm, tinggi total: 2.700 mm, lebar total: 1.700 mm, panjang total: 2.000 mm, daya: 0,01 kW (0,01 hp), CNC drilling and milling machine with Heidenhain TNC 426 control, only 8,500 operating hours. Table size 380x920 mm, travel range X/Y/Z/W - 500/350/610 mm, maximum table load 250 kg, stepless spindle speeds 50-10,000 rpm, spindle power 10.2 kW, drilling capacity Ø 25 mm, tapping capacity M20, tool system SK 30, 24-position tool changer, electronic handwheel, central lubrication, oil mist filter, coolant recirculator, IKZ and Renishaw preparation, extensive tooling and tool holders, user manual, Podpfstvmtkox Af Eepu

Kondisi: baru, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirement: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the sawing stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Minimum rest piece length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Ppodpfxefu Nbbe Af Eju Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Kondisi: bekas,

Kondisi: bekas, Thrust: 600 tons Number of blank holder pins: 2 Model: AF 600 MB 30-60 Year of manufacture: 1994 Table dimensions: 3,000 x 1,600 mm Ram dimensions: 3,000 x 1,600 mm Pjdpfxsq N Etto Af Eopu Front opening: 3,000 mm Side opening: 1,200 mm Ram adjustment: 150 mm Strokes per minute: 20 spm Stroke: 500 mm Die opening at BDC: 1,118 mm Main motor power: 30 kW Hydraulic safety: present Weight: 110 tons.

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Travel distances X: 600 mm Y: 350 mm Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Ppedpfx Asu Tln Nof Eou Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Tahun pembuatan: 1987, Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 6.000 h, jarak pergerakan sumbu X: 505 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 300 kg, produsen pengendali: Heidenhain, berat keseluruhan: 250 kg, panjang meja: 920 mm, lebar meja: 380 mm, model controller: TNC 426, kecepatan pemakanan sumbu X: 20.000 m/menit, laju pemakanan gandar Y: 20.000 m/menit, laju pemakanan sumbu Z: 20.000 m/menit, daya motor spindle: 10 W, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 50 rpm, tinggi meja: 1.004 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, The machine is equipped as follows: - Tool holder: SK 30 Pjdpfx Aov A Tyqef Ejpu - Tool changer with 24 positions (automatic tool change) - Coolant system - Spindle cooling - Mist extraction unit - Chip drawer - RENISHAW probe

Kondisi: baru, Pressure: 60 Bending length: 1550 Throat width: 1250 Installation height: 410 Max. stroke length: 220 Throat depth: 400 Dimensions (LxWxH): 2445x2200x2390 Approx. weight: 4250 Motor power: 7.5 FeatureValueUnit Bending length1550mm Bending force60t Approach speed180mm/s Bending speed10mm/s Retract speed160mm/s Stroke220mm Distance between open uprights (D)410mm Throat depth (E)400mm Distance between side frames (B)1250mm Length (L)2445mm Width (W)2200mm Width without front gauge (Y)1635mm Maximum height2390mm Main motor7.5kW Oil tank100l Weight4300kg The robust EUROPA XL press brake is distinguished by its high precision, accuracy, and versatile application possibilities. EUROPA XL offers a very large installation height and, as a result, a large stroke (cylinder travel). The throat depth is also above average to provide minimal limitations during operation. We focus on quality, which is also reflected in the control system. As a standard control, we have installed the high-quality Esa S640 (2D graphic control). Furthermore, the KKI EUROPA XL press brake is equipped with Y1, Y2, and X axes, all controllable from the system. We also make no compromises when it comes to the upper tool and die—each KKI EUROPA XL CNC press brake is supplied with premium tooling made by EUROSTAMP Italy. Of course, a machine is only as good as its service—therefore, our emphasis is on highly qualified staff with extensive experience in the field of CNC sheet metal processing. CNC axes: Y1, Y2, X Esa S640 (2D graphic controller) Backgauge with dual linear guide and ball screw spindle 2 heavy-duty front support arms, height adjustable by handwheel; heavier linear guided versions from 175 tons upwards Upper beam laser safety device CE safety equipment Various options available Options: Ppsdpfx Ajd En R Djf Eou R-Axis                                                                                 €5,375 Other control systems: ESA 640 2D 15" touchscreen controller                                        €4,520 incl. ESA 675 W 3D 21" touchscreen controller (Windows-based)      €6,485 DELEM 66 T 2D 17" touchscreen controller (Windows-based)      €10,165 DELEM 69 T 3D 17" touchscreen controller (Windows-based)      €16,350 KK-Industries GmbH There’s something here for everyone!

Tahun pembuatan: 2020, Kondisi: seperti baru (mesin pameran), Plasma-nitrided rolls 64 HRC, max. sheet thickness 3 mm, max. width 120 mm, repeat accuracy +/- 0.06 mm, at 50 mm feed 350 strokes/min, 180° free angle. Ppjdpfxeg Ew Ixo Af Esu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 14599631, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 610 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 24, Pengukuran alat dan probe pengukur telah dipasang tambahan pada tahun 2022 dengan total biaya 15.000 EUR. Mesin sudah dipersiapkan untuk sumbu ke-4 dan ke-5! DETAIL TEKNIS Pergerakan sumbu X: 500 mm Pergerakan sumbu Y: 350 mm Pergerakan sumbu Z: 610 mm Kecepatan putar spindle: 18.000 rpm Tipe spindle: SK30 ATC: 24 posisi DETAIL MESIN Jam operasi Berjalan program: 13.613 jam Jam nyala mesin: 39.034 jam Jam nyala kontrol: 38.758 jam PERLENGKAPAN Koneksi dan penggerak untuk sumbu 4-5 Probe pengukur 3D Heidenhain TS642 Pengukuran alat Heidenhain TT140 Unit pendingin spindle Handwheel elektrik Heidenhain HR410 Ppjdpfx Afex Agp Io Eou Sekitar 30 unit holder alat Collet Dokumentasi lengkap Probe pengukur 3D

Kondisi: bekas, Installation rectifier unit. Ppsdpfxod Ihaxj Af Eeu For technical data, see photos.

Kondisi: bekas, Built-in converter unit for alternating and direct current rectification. Ppedpfsd Ihaysx Af Eju For technical data, see photos.

Kondisi: baru, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 106653, ZH baru untuk KR30/60. Ini adalah suku cadang baru yang dikirimkan oleh produsen Kuka. Ppedpfoxzynujx Af Eju

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 34.797 h, nomor mesin/kendaraan: 2011-0250, Diameter pipa (maks.): 600 mm, Panjang pipa (maks.): 1.500 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 200 mm, ketebalan dinding: 3 mm, Original machine built in 1996. In 2011, the unit was comprehensively overhauled by the OEM for approximately €250,000: extensive renewal of both the electrical and mechanical systems. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 – 1,500 mm Tube outer diameter: 28 mm – 60 mm Material Parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion Data Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Twist angle: max. 360° Twist speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Ppedpex Srklefx Af Eju Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control desk (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance Data Total power requirement: 55 kW Hydraulic reservoir capacity: 340 l Control System Bending planes: up to 6 (CNC programmable) Positioning system: NTB design Control unit: Schwarze-Robitec operating and control panel FEATURES - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, guide rail, mandrel retraction, reinforced guide rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (dual) - Schwarze-Robitec control panel - Rittal control cabinet cooling unit type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operator knowledge. No faults are known. The machine is currently dismantled.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 8.307 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.890 mm, pengangkatan bebas: 1.750 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.260 mm, panjang garpu: 1.200 mm, jenis penggerak: Elektro, Elektro 4 Rad-Stapler Psdpfx Afsxaqyfo Eepu

Kondisi: bekas, Profile steel blade, shear tool, cutting tool, separating tool, punching tool, punch, punching die, punching stamp Pedpfecwn E Njx Af Ejpu -only one tool available (counter-tool is missing) -Shear tool for U-steel: 30 mm, 60 mm -Type: 441216084902 -1x Dimensions: 210/220/H30 mm -Weight: 9.9 kg

Kondisi: bekas, Lifting clamp, plate clamp, beam clamp, sheet metal clamp, beam gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, load clamp, crane clamp -Manufacturer: Renfroe, Plate Gripper Lifting Clamp Type MPC2 -Clamping range: 30-60 mm -Lifting capacity: 2000 kg -Dimensions: 400/300/120 mm -Weight: 9.3 kg Ppodpfx Aehgkg Ejf Eou