Beli Fintek Amh 3145 bekas (50)

Kondisi: sangat baik (bekas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: - Air-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R404A Blsdpfozg Twasx Abven Door: - Fully opening door, left-hand hinge - One-hand operation, lockable Shelving Grate: - Stainless steel, support surface 970 x 980 + 500 mm - Maximum load per shelf: 35 kg - Total load with maximum shelf configuration: 100 kg Test Chamber Lighting: - 3x halogen lamps, 20 W, 12 V Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input of setpoints - Plain text fault messages - RS 232 interface - Free switching channels for customer-specific test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Piping Feedthrough: NW 50 Control Panel Window: 570 x 710 mm Electrical connection cable length: 5 m Technical Performance Data: Temperature Tests: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 2.5 K/min - Cooling: 1.5 K/min Heat Emission: - Approx. 2500 W at +20°C - Approx. 2100 W at 0°C - Approx. 1500 W at -20°C Technical data based on ambient temperature +25°C, rated voltage 400V, without test specimens, no irradiation, and no additional equipment. Dimensions: - Test volume: 2000 litres - Test chamber internal dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm - External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz - Rated power: 17.2 kW - Protection class: IP 22 - Condensate drain: gravity, R 1/2" internal thread - Sound pressure level (measured at 1 m front distance, according to DIN EN ISO 3744): < 55 dB(A) - Weight: approx. 1200 kg Important Information for Your Safety as a Buyer! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run Condition: Used Scope of delivery: (see image) (Technical data, specifications, and information are subject to change and correction!) We are happy to answer further questions for you by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, panjang total: 6.060 mm, lebar total: 2.440 mm, tinggi total: 2.590 mm,

Kondisi: bekas, jarak tempuh: 314.567 km, daya: 184 kW (250,17 hp), pendaftaran pertama: 05/2014, jenis bahan bakar: diesel, berat kosong: 9.347 kg, berat muatan maksimum: 8.653 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 4x2, jarak roda: 4.800 mm, inspeksi berikutnya (TÜV): 11/2024, rem: pengereman mesin, kabin pengemudi: lain, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, jumlah tempat duduk: 2, panjang ruang muatan: 5.700 mm, lebar ruang muat: 2.600 mm, tinggi ruang muatan: 900 mm, Perlengkapan: ABS, derek, filter jelaga, kemudi berkuasa, kendali jelajah, kunci diferensial, kunci sentral, pemanas parkir, program stabilitas elektronik (ESP),

Kondisi: baik (bekas), Tahun pembuatan: 2019, de-to-hu-it-lt-lv-nb-nl-pl Blsdpexm Tauofx Abvjn

Kondisi: bekas, jarak tempuh: 24.322 km, daya: 107 kW (145,48 hp), pendaftaran pertama: 05/2022, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 4.330 mm, bahan bakar: diesel, Emisi CO₂: 336 g/km, kapasitas tangki bahan bakar: 80 l, warna: putih, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang ruang muatan: 3.170 mm, lebar ruang muat: 2.040 mm, Tahun pembuatan: 2022, Perlengkapan: ABS, bantuan mulai menanjak, derek, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), spion elektrik,

Kondisi: bekas, daya: 14 kW (19,03 hp), Tahun pembuatan: 2004, jam operasional: 1.000 h, Perlengkapan: penggerak semua roda,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0151 - Rev.00, gaya penekanan: 110 t, Single-column Press – Manufacturer Calende – 110 t C-Frame Press – Table 800 × 700 mm Bledpfxsdxrqwj Abven For sale is a powerful hydraulic single-column press (C-frame) by Calende with a pressing force of 110 t. The machine offers high dynamics thanks to proportional valve control, modern Siemens automation, and comprehensive adjustment options, making it ideal for demanding assembly, straightening, and press-fitting applications. ==== Technical Data & Details: Single-column Press Calende – 110 t C-Frame Press ==== General Information - Manufacturer: Calende - Model: Single-column Press - Design: C-Frame Press / Single-column Press - Pressing force: 110 t - Machine weight: approx. 5 t - Dimensions (L × W × H): approx. 1,950 × 1,510 × 3,145 mm ==== Working Area - Throat width: 800 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 800 × 600 mm - Ram plate thickness: 6 inch ==== Speeds - Approach speed: 5 – 195 mm/s - Pressing speed: 1 – 15 mm/s - Return speed: 5 – 140 mm/s ==== Hydraulics - Motor power: 20 kW - Retraction force: 11 t - Cylinder diameter: Ø 200 mm - Oil tank volume: 400 l - Proportional valve for speed regulation ==== Controls & Operation - Control system: Siemens S7-1200 - Monitor: Siemens, 10" - Program memory: up to 200 programs - HMI pressure control: 20 – 110 t - Siemens remote access for maintenance ==== Safety & Equipment - Light barriers: Schmersal, 700 mm - Motor: IE3 energy efficiency (CE compliant) ===== Assembly work, Press-fitting, Straightening, Series production, Tool making, Industrial manufacturing, Maintenance Single-column press, C-frame press, Hydraulic press, Workshop press, Assembly press, Industrial press, Tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all requirements of the Brazilian national NR 12 safety standard, which is based on these. Our main strength lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly attractive prices. Only components from leading European manufacturers are primarily used in the hydraulic systems of our presses.

Kondisi: baik (bekas), de-001 Blodpfx Aev Ullcobven

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Lectra VT-FA-MH-71 mesin pemotong CNC lebar: 170 cm Blsdpfx Aswzxz Nsbven panjang: 185 cm sabuk keluar: 200 cm Tinggi potong maks.: 5 cm Kontrol CNC

Kondisi: bekas, Produsen: CAM Model: CAM HF 77-8 Tipe: Mesin kartonisasi/box otomatis berkelanjutan Bjdpfx Abszg I U Hsvsln Aplikasi: pembotolan (drat miring) Penggunaan sebelumnya: farmasi, pengemasan botol sirup. Direkondisi ulang oleh produsen pada tahun 2004. Kisaran ukuran A: 20mm hingga 70mm Kisaran ukuran B: 12mm hingga 70mm Kisaran format C: 50mm hingga 200mm; Kisaran format A + B maks: 140mm Distribusi selebaran. Dokumen tersedia bersama mesin. PLC Siemens.

Kondisi: bekas, jarak tempuh: 10 km, daya: 106 kW (144,12 hp), pendaftaran pertama: 02/2026, jenis bahan bakar: diesel, inspeksi berikutnya (TÜV): 02/2029, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: mekanis, jumlah tempat duduk: 3, Perlengkapan: ABS, kantung udara, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, nomor mesin/kendaraan: 697, jarak tempuh: 32.242 km, daya: 132 kW (179,47 hp), pendaftaran pertama: 01/1995, jenis bahan bakar: diesel, berat kosong: 9.500 kg, berat muatan maksimum: 2.300 kg, berat keseluruhan: 11.800 kg, ukuran ban: 9r22,5, konfigurasi gandar: 4x4, rem: retarder, warna: hijau, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, suspensi: baja, berat operasi: 18.200 kg, Perlengkapan: ABS, derek, hidrolik, kompresor, kopling trailer, kunci diferensial, penggerak semua roda, retarder, TÜV will be newly issued, truck registration. This Steyr is in exceptionally good condition, coming directly from the authorities (Swiss Army). It has been excellently maintained and has a complete service history; see photo. The bodywork is in outstanding condition. The 12S18 is equipped with: all-wheel drive, rear differential lock, two seats at the front (a 3rd seat can be retrofitted), rear-mounted loading crane with a reach of 5,400 mm; lifting capacity at 3.6 meters is 2 tons and at 5.4 meters is 1.36 tons. MKG crane type HLK 73a1, additionally equipped with a Rotzler winch, type HK 022, with 10 mm steel cable, allowing you to lift or lower loads at the crane tip into or out of shafts. The crane outriggers also feature a manual extension so as not to compromise off-road capability. Tire size: 9R22.5. Transmission with 6 gears plus off-road reduction. Features a speed limiter. Unladen weight: 9,500 kg. Gross vehicle weight: 11,800 kg. Engine displacement: 6,592 cm³. 24-volt electrical system. Upon delivery, the Steyr will have not only the new TÜV certificate, but will also run reliably. The Steyr is ideal as a hobby vehicle but is also perfectly suited for daily work use. All my vehicles can be seen on my website. You’re running from Flensburg to Berchtesgaden looking for different vehicles, when you can find over 150 vehicles here of the following types: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, DB, etc.—and all with TÜV! In addition, there are countless spare parts and accessories available. Why settle for less? Give me a call at 0049 (0)2248. Best regards, Philipp. Blodoqx Sznspfx Abven

Kondisi: bekas, jarak tempuh: 10 km, daya: 106 kW (144,12 hp), pendaftaran pertama: 02/2026, jenis bahan bakar: diesel, berat kosong: 1.700 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 02/2029, bahan bakar: diesel, efisiensi energi: B, warna: putih, tipe perpindahan gigi: mekanis, jumlah tempat duduk: 3, Perlengkapan: filter jelaga, kantung udara, kendali jelajah, komputer bawaan, kopling trailer, kunci sentral, lampu kabut,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Variable three-roll bending machine with adjustable side rolls Manufacturer: FACCIN, Model HAV/S 3145 Bjdpfxoc S N Nqs Abvoln Technical data: Number of rolls: three Side roll geometry: variable Working width: 3000 mm Top roll diameter: 450 mm Variable three-roll bending machine

Kondisi: baik (bekas), Punching machine, punch press, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press - Manufacturer: Mubea, hole punch type KL 100 with 2-axis digital display - Pressing force: 100 tons - Punching capacity: see type plate photo - Throat depth: 535 mm - Material table: 1240 x 615 mm Bjdpeik Sl Hofx Abvoln - Travel distance: x = 1100 mm / y = 600 mm - Digital display: Heidenhain 2-axis digital readout - Accessories: incl. as per photos - Overall dimensions: 2200/2020/H2110 mm - Machine weight: 3145 kg - Accessories weight: 693 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, gaya penekanan: 10 t, panjang langkah: 200 mm, kecepatan operasi: 260 mm/dtk, lebar meja: 430 mm, panjang meja: 440 mm, kapasitas tangki oli: 46 l, berat keseluruhan: 800 kg, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, en: Manufacturer: JAM Model: HYP-1000 Year of manufacture: 2003 Blsdovbfkropfx Abvsn Capacity: 98 kN (10 t) Stroke: 200 mm Open height: 395 mm Table size: 440 × 430 mm Ram bore: φ32 × 60L mm Ram approach speed: 260 mm/s Ram pressing speed: 19 mm/s Ram return speed: 219 mm/s Equipped with basic safety device Voltage: 3-phase, 200 V, 1.5 kW Press body weight: 800 kg Hydraulic oil capacity: 43 liters Height (mm): 1395 Width (mm): 700 Depth (mm): 1170

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 800 kg, Tahun pembuatan: 1995, gaya penekanan: 10 t, kecepatan operasi: 260 mm/dtk, panjang langkah: 200 mm, panjang meja: 440 mm, lebar meja: 430 mm, jenis arus masuk: AC (pendingin udara), Perlengkapan: penghadang cahaya keselamatan, For sale is a 10-ton hydraulic press by J.A.M “Japan” in excellent condition. Manufacturer: JAM Model: HYP-1000 Year of Manufacture: 1995 Capacity: 98 kN (10 t) Stroke length: 200 mm Bsdowcqc Ujpfx Abveln Open height: 395 mm Table size: 440 × 430 mm Punching hole: φ32 × 60L mm Ram approach speed: 260 mm/s Pressing speed: 19 mm/s Ram return speed: 219 mm/s Equipped with advanced safety features Two-hand operation Voltage: 3-phase 200 V, 1.5 kW Frame weight: 800 kg Hydraulic oil volume: 43 liters Height (mm): 1395 Width (mm): 700 Depth (mm): 1170

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 5 t, lebar meja: 400 mm, panjang meja: 340 mm, berat keseluruhan: 500 kg, Perlengkapan: penghadang cahaya keselamatan, Hydraulic Press JAM HYP-505H Press Machine in excellent condition for sale Manufacturer: JAM Model: HYP-505H Year of manufacture: 1990 Capacity: 50 kN (5 t) Stroke length: 150 mm Open height: 385 mm Table size: 400 × 340 mm Punch hole: φ25 × 60L mm Ram approach speed: 260 mm/s Pressing speed: 39 mm/s Ram return speed: 360 mm/s Pressure range: 7.7 MPa Safety light curtain Voltage: 3-phase 200 V, 1.5 kW, 10 A Press body weight: 400 kg Hydraulic oil capacity: 20 liters Height (mm): 1070 Width (mm): 670 Length (mm): 1060 Bjdpov Sd S Nsfx Abvoln If you need further information, we are at your disposal! Feel free to contact us using the contact form or call us directly. Your listing has been automatically translated. Translation errors may be possible.

Kondisi: siap digunakan (bekas), Fanuc A06B-2076-B503 AC Servomotor Nomor Seri: C22CC3145 + Encoder A860-2070-T321, bekas, kondisi terawat baik, 100% berfungsi, cakupan pengiriman sesuai foto. Bljdpfx Abjx Dt S Ssven

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, tegangan masuk: 200 V, jenis arus masuk: tiga fasa, gaya penekanan: 5 t, panjang langkah: 150 mm, kecepatan mundur: 360 mm/dtk, lebar meja: 400 mm, panjang meja: 340 mm, berat keseluruhan: 400 kg, tinggi kerja: 385 mm, Perlengkapan: penghadang cahaya keselamatan, JAM HYP-505H hydraulic press for sale in excellent condition Manufacturer: JAM Model: HYP-505H Year of manufacture: 1990 Pressing force: 50 kN (5 t) Stroke length: 150 mm Working height: 385 mm Table dimensions: 400 × 340 mm Punch hole: Ø 25 × 60 mm Blsdpfx Abowin Emjven Ram speed: 260 mm/s Pressing speed: 39 mm/s Ram return speed: 360 mm/s Pressure range: 7.7 MPa Safety light curtain Two-hand operation Voltage: 3-phase, 200 V, 1.5 kW, 10 A Weight: 400 kg Hydraulic oil capacity: 25 litres Height (mm): 1070 Width (mm): 670 Length (mm): 1060

Kondisi: bekas, Pemuatan dan Penumpukan Merek: Wamhoff Pemuatan Merek: Wamhoff Penumpukan Otomatis Blodpfx Aezuz I Aebvsn Merek: Wamhoff Tahun Pembuatan: 2008 Catatan: Data teknis dan deskripsi adalah salinan dari konfirmasi pesanan saat itu. Data disediakan untuk informasi dan tidak mengikat.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, kapasitas angkut: 50 kg, MH50 DX100 MOTOMAN Yaskawa diuji dengan perawatan baru Profibus / Euromap antarmuka kartu I/O tambahan dengan elemen transfer Blsdpfxoyx Ul Se Abvjn

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Homogenizer used in ice cream production Bjdjvtpw Hjpfx Abvoln

Kondisi: sangat baik (bekas), Machines belonging to the line (Code SOFIT YZ0900) Split Sawing Machine (used to split the unique workpiece panel into two parts): Minimum workpiece length: approx. 250 mm Maximum workpiece length: approx. 3000 mm Minimum width of split workpieces: approx. 120+120 mm Maximum width of split workpieces: approx. 600+600 mm Thickness (min./max.) of the workpiece: approx. 10 / 60 mm Maximum feed speed: 60 m/min Bledpjf N Ngbofx Abvsn Including the following units: Scoring unit from below (Power 3 kW), max. diameter 350 mm Chamfering unit from above (Power 3 kW), max. diameter 300 mm Main saw unit (Power 11 kW), max. diameter 450 mm

Kondisi: baik (bekas), CEE wall socket - Surface-mounted - 5-pole - Type: GHG 531 4506 V0000 Bodpfxsb A Sf Re Abvjln - Explosion-proof (EX protected) - Weight: 0.5 kg