Beli Litz Pusat Permesinan Universal bekas (79.795)

Kondisi: bekas, Tahun pembuatan: 2014, Pengontrol Heidenhain Jangkauan sumbu-X 1.000 mm Jangkauan sumbu-Y 1.100 mm Jangkauan sumbu-Z 1.040 mm Pemasangan perkakas HSK 63 Jumlah posisi perkakas 338 Kondisi: bekas Fitur dan aksesori teknis: - Pengubah perkakas TM218 - Unit pendingin KNOLL FKA/750 - Filter pita KNOLL KF220 Dwodpfsz Hz N Isx Afwsc - Pengangkut serpihan KNOLL 850K-1 Aksesori, perkakas yang ditampilkan, dan perlengkapan penjepit hanya termasuk dalam lingkup pengiriman jika hal ini disebutkan dalam informasi tambahan. Perubahan dan kesalahan dalam data dan spesifikasi teknis dapat terjadi! Penjualan dapat dilakukan kapan saja!

Kondisi: bekas, Tahun pembuatan: 2013, de-hu-001 Djdoyr Aq Iepfx Afwswc

Kondisi: bekas, Tahun pembuatan: 2016, Pengendali Heidenhain Jarak sumbu X 800 mm Jarak sumbu Y 1.020 mm Jarak sumbu Z 1.020 mm Kondisi: bekas Mesin telah direkondisi secara menyeluruh oleh GROB Dsdpfx Aoz Hz Nhofwowc Fitur teknis & aksesori: - Unit pendingin HYFRA - Filter pita KNOLL KF-220 - Konveyor serpihan KNOLL 750K-1 - Majalah penampung perkakas TM218-9 - Sistem otomatis pemuatan palet SCHULER LMC900 - 10 posisi palet - Lengan robot yang dapat digerakkan Aksesori, perkakas yang ditampilkan, dan perlengkapan penjepit hanya termasuk dalam ruang lingkup pengiriman jika hal ini disebutkan dalam informasi tambahan. Perubahan dan kesalahan dalam data dan spesifikasi teknis dapat terjadi! Hak untuk menjual dipertahankan!

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 1,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm C-axis: 360° x 0.001° A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain type, 180 positions Total power requirement: 85 kW Machine weight approx. 20.5 t Space requirements approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary-swivel table Rotoclear window Probe interface prepared Blum laser tool measurement Vibration sensor Tool taper cleaning Operating mode 4 Dodpfew E Nnnex Afwswc IKZ (internal coolant supply) with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling / heating unit

Kondisi: bekas, Tahun pembuatan: 2011, trans-001 Dwsdeyz Dcfopfx Afwoc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 400 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: skyCNC 6008, jarak pergerakan sumbu X: 900 mm, jarak lintasan sumbu Y: 6.100 mm, jarak gerak sumbu Z: 270 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 8 m/menit, panjang benda kerja (maks.): 6.000 mm, lebar benda kerja (maks.): 800 mm, diameter benda kerja (maks.): 270 mm, lebar meja: 800 mm, beban meja: 400 kg, berat keseluruhan: 3.250 kg, kecepatan spindel (min.): 15.000 rpm, X 900 Y 6100 Z 270 mm 11kW (Table 800) available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11kW / 5 ATC (As new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A like-new 6-meter CNC milling machine with automatic tool changer is being offered on behalf of the customer. The machine is immediately available and operational at the user’s site; sale is due to conversion to laser processing. The machine can be viewed under power at the customer/seller’s location in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance under gantry 300 mm, max. tool length 300 mm) - Automatic 5-position tool changer system ISO40 (optional: up to 10 tool changer positions possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for workpiece and tool cooling, automatically controlled via solenoid valve using M-code - T-slot table 6000 mm x 800 mm - Includes 3 pneumatic quick-release vices HOMGE HBV-8-300; jaw width 200 mm, clamping force up to 8.0 tons – continuously adjustable; high clamping accuracy; patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for easy and fast machine operation, workpiece zero points freely selectable - Ethernet port for data transfer via network, USB port Dwsdpfxjwlqpys Afwoc - Supported file formats: G-code, DIN ISO data - Includes industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3 phase AC 400V / 50 Hz, max. power consumption: 15 kW - Dimensions (LxWxH): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar incl. air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Kondisi: bekas, Tahun pembuatan: 2013, Pengendali Heidenhain Jangkauan sumbu X 800 mm Jangkauan sumbu Y 650 mm Jangkauan sumbu Z 550 mm Sumbu B -5 / +110° Sumbu C 360° Dimensi meja 800 x 700 mm Berat benda kerja maksimum 600 kg Kecepatan spindel 18.000 RPM Jam operasi sekitar 71.618 jam Jam spindel sekitar 33.508 jam Kondisi: bekas Termasuk robot pemuat ZERO CLAMP Aksesori, perkakas yang ditampilkan, dan alat penjepit hanya termasuk dalam cakupan pengiriman jika hal ini disebutkan dalam informasi tambahan. Perubahan dan kesalahan dalam data dan spesifikasi teknis dapat terjadi! Penjualan dapat dilakukan sewaktu-waktu! Dwodpjz Hqkzjfx Afwoc

Kondisi: bekas, Tahun pembuatan: 2005, translation-01 Dedpjvn Ur Eofx Afwowc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 620 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 460 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, daya nominal (semu): 45 kVA, torsi: 180 Nm, produsen pengendali: Heidenhain, model controller: TNC640, tinggi benda kerja (maks.): 430 mm, diameter benda kerja (maks.): 580 mm, berat benda kerja (maks.): 300 kg, tinggi total: 3.300 mm, panjang total: 3.225 mm, lebar total: 2.256 mm, beban meja: 300 kg, diameter meja putar: 500 mm, berat keseluruhan: 8.500 kg, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 40 h, pasokan pendingin: 42 batang, jarak dari tengah meja ke hidung spindel: 150 mm, daya motor spindle: 3.400 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, panjang alat: 250 mm, diameter alat: 127 mm, berat alat: 7.000 g, suplai pendingin melalui spindel: 42 batang, sudut putar sumbu B (min.): -50 °, sudut putar sumbu B (maks.): 110 °, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mesin demonstrasi Perlengkapan Axon LU 620 - Heidenhain TNC640 - 5-sumbu simultan - Heidenhain penggaris kaca pada semua 5 sumbu - Kinematic Optimizer - Spindel Direct Drive 15.000 rpm dengan 34 kW dan maks. 180Nm (25% ED) - Paket produksi I dengan 42 bar IKZ - Udara melalui spindel - Suplai media melalui tengah meja - Pengukuran benda kerja otomatis Renishaw OMP 40 - Kontrol kerusakan alat laser Blum NT A-3 Split Dwodoywyqkspfx Afwsc - Sistem filter pita kertas - Sistem pembilasan cincin pada spindel - Pintu samping otomatis - 60 slot magazen - SK40 - Konveyor serpihan tipe sabuk pengikis - Pembilasan serpihan - Sistem penyedot debu

Kondisi: bekas, Tahun pembuatan: 2007, travel range x-axis: 730 mm y-axis travel: 560 mm z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 10 / 15 kW Max. torque: 130 / 87 Nm Tool holder: HSK-A63 Swiveling axis NC: ° Table clamping surface: 1,000 x 600 mm T-slots: 9x 14 x 63 mm Dodpfx Afjwpw E Nswjwc Table diameter: 600 mm Rotary axis C: 360° Max. table load: 500 kg Number of tool stations: 60 positions Tool holder: HSK-A63 Total power requirement: 40 kVA Machine weight approx.: 11.0 t Space requirement approx.: 4.5 x 4.5 x 3.5 m CNC Universal Machining Center DECKEL MAHO - DMU 60 monoBLOCK - 5 axes - NC rotary table - Swivel milling head

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), Travel paths 6000x1000x1200 mm B-axis milling head +/-90° Dedjd Rz Uvjpfx Afwjwc Table size 6400x1000 mm Spindle taper HSK-100 Spindle speeds up to 9000 rpm Tool changer with 80 positions Control SIEMENS 840D Spindle internal cooling Tool measuring system Zero-point clamping system 3R MARCELS MASCHINEN CH

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 150 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 650 mm, gerak cepat sumbu X: 48 m/menit, pergeseran cepat sumbu Y: 48 m/menit, pergerakan cepat sumbu Z: 48 m/menit, daya nominal (semu): 35 kVA, torsi: 120 Nm, produsen pengendali: Heidenhain, model controller: TNC7, beban meja: 2.000 kg, diameter meja putar: 800 mm, berat keseluruhan: 18.600 kg, kecepatan spindel (min.): 20.000 rpm, daya motor spindle: 34.000 W, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mesin pameran kondisi seperti baru, laser, probe, pendinginan internal alat (IKZ) dapat dikonfigurasi Dwodexbzyropfx Afwec

Kondisi: sangat baik (bekas), 5-axis machining center with swiveling milling head, pallet station, tool calibration, thermal compensation, workspace extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control: - Heidenhain iTNC 530 HSCI - Heidenhain DCM collision monitoring - Heidenhain HR 410 handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel range: - X-axis: 1,000 mm, Y-axis: 1,100 mm, Z-axis: 810 mm - NC rotary table diameter 1,000 x 800 mm, swing circle 1,350 mm Milling head: Dwjdexhg Diepfx Afwsc - Automatic horizontal/vertical swivel head - Fully-fledged infinitely variable NC axis from -1° to +90° - Air blast through spindle - External cooling via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle taper: HSK 63-A Media supply: - Internal coolant supply 50 bar – capacity 28 l/min - Paper band filter with additional fine filter - Pressure regulation of individual tools during program run Tool changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog control panel - Drawer for inserting and removing tools from the tool racks Tool measurement: - 3D wireless touch probe m&h 20.00-Multi, software adaptation for HSK 63-A - Incl. Kinematics-Opt, suitable for iTNC control, and calibration sphere on magnetic stand Pallet changer: - 2-station pallet unit, pallet diameter 1,000 x 800 mm, hole grid 100 x 100 mm, hardened drill sleeves Ø 16 mm - Rotary table unit incl. zero-point clamping system, loading station accessible by crane. - Pallet changing unit protected by enclosure. Special features: - Micro-Epsilon for detection and dynamic compensation of thermally induced spindle growth Chip conveyor: - Scraper belt conveyor, longitudinal arrangement to the machine bed - Chip discharge height 1,100 mm Machine enclosure: - Full-space protective guarding with large angle door for crane loading and quick access door - Easy removal of chips from working area Extraction system: - Oil and emulsion mist extraction, mechanical air filter, extraction rate 1,800 m³/h Rotary viewing window: - Viewing window in the machine door integrated into enclosure Camera inside the work area: - Monitor and keyboard at the machine control panel allow observation of rear-side machining Machine data: - Space requirements (excluding service areas): LxWxH approx. 4,791 mm x 4,100 mm x 4,791 mm (incl. extraction system) - Machine weight approx. 19,700 kg - Total weight incl. all equipment, max. workpiece load, fully equipped magazine, and all operating fluids: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring exceptionally practical and high-quality equipment, is in excellent condition. It delivers the familiar “Swiss precision.” The machine does not have any outstanding maintenance or repair issues—in fact, thanks to the nearly new milling spindle, the REIDEN RX 10 5X is well-prepared for long-term use. Technical modifications and errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, With B and C axis Travels: 762 x 508 x 508 mm Table diameter: 500 mm Spindle taper: SK40 Spindle speeds: up to 12,000 rpm Tool changer: 40 positions Dsdjlhqydepfx Afwjwc Control: HAAS Through-spindle coolant Various accessories MARCELS MASCHINEN CH

Kondisi: bekas, Tahun pembuatan: 2008, x-trv-001 Dwedpfx Aeukwatjfwoc

Kondisi: bekas, Tahun pembuatan: 2017, Pengendali Heidenhain TNC 640 Jangkauan sumbu X: 600 mm Jangkauan sumbu Y: 450 mm Jangkauan sumbu Z: 450 mm Dedoz Ic Afspfx Afwewc Kecepatan spindel: 20.000 RPM Penyangga perkakas: HSK-A63 Jumlah posisi perkakas: 170 Kondisi: bekas Fitur Teknis & Aksesori: - Majalah perkakas, MIKRON ATC 170 - Pendingin perkakas, HABOR PRECISE INC - Filter kabut oli/udara, DSL Signatec 15 - Konveyor serpihan, KNOLL 500 K-1 - Majalah benda kerja dengan 7 posisi Aksesori, perkakas yang ditampilkan, dan alat penjepit hanya termasuk dalam cakupan pengiriman jika ini disebutkan dalam informasi tambahan. Perubahan dan kesalahan dalam data dan spesifikasi teknis dicadangkan!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N1A665853, berat alat: 30.000 g, tegangan masuk: 400 V, Machining Centre Rumba – 4-axis Working length: 4000 mm CNC-controlled machining centre with vertical processing spindle, suitable for machining extruded aluminium profiles, light metals, PVC, and steel from 3 sides. Numerically controlled tilting worktable: -90°/0°/+90° including intermediate angles. The machine is equipped with a 4 kW electrospindle, 18,000 rpm, inverter-controlled, with quick-change tool system (tool changer) and ISO30 spindle. Interpolation of X, Y, Z, and W axes by numerical control. Brushless motors for positioning of X, Y, Z, and W axes. Includes 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear rails. Left profile stopper. 10.4" colour monitor (touchscreen with simplified Windows-based graphics, TeamViewer for remote maintenance, special HICAM 2 / CAMPROX software for ISO file import and program execution). Capable of processing longer parts. Standard equipment: - 4 kW ISO30 electrospindle - 4 pneumatic clamps (manually adjustable) - Safety guarding - Automatic tool changer (10 tools) - 4x ISO30 tool holders complete with tool - 3 chip collection compartments - Air nozzle Technical data: X-axis travel: 3000 mm / 4000 mm Y-axis travel: 400 mm Z-axis travel: 300 mm Rapid traverse (X, Y, Z): 50 m/min Acceleration (X, Y, Z): 1.5 m/s² Electrospindle: 6.6 kW HSK63 Spindle cooling: Air and liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Operating pressure: 7 bar Djdpfx Afjwgm Ibewswc Weight: 2500 kg

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), HEIDENHAIN iTNC530 with B + C axis Travel distances: 885 x 800 x 520 mm Table size: 600 x 500 mm Tilting table: +30°/-120° Rotary table: 360° Spindle taper: SK40 Big Plus Spindle speeds: up to 15,000 rpm Tool changer: 60 positions Dwjdpfjh Agwrox Afwsc Spindle internal cooling 3D probe: Renishaw MARCELS MASCHINEN CH

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), 5-axis machining center FANUC G-Tech 30i Travel distances: 550 x 410 x 450 mm B-axis table: +/- 110° A-axis table: 360° Spindle mounting: BT40 Big Plus Spindle speeds: up to 15,000 rpm Tool changer: 40 positions Pallet stations: 2x, diameter 250 mm Internal spindle cooling 3D measuring probe Dedpfx Ajgufmrefwewc Tool measuring system Pallets: 15x Tool holders: approx. 80x KNOLL / TURBO coolant system MARCELS MASCHINEN CH

Kondisi: bekas, Tahun pembuatan: 2005, x-travel 1,000 mm y-travel 1,000 mm z-travel 1,000 mm Control system: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Tiltable B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight: approx. 27.0 t Space requirements: approx. 8.0 x 7.0 x 3.4 m 5-Axis CNC Universal Machining Centre DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine Dwodowf Rgfspfx Afwec - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Kondisi: bekas, Tahun pembuatan: 2003, en-001 Dsdpfx Afsvn Utcswswc

Kondisi: bekas, Tahun pembuatan: 2018, Pengontrol Siemens Jarak sumbu X 750 mm Dwjdeyrt A Ispfx Afwsc Jarak sumbu Y 660 mm Jarak sumbu Z 650 mm Rentang putar 0 - 180 ° Waktu putar (0°–180°) sekitar 5 detik Percepatan sumbu X 6 m/s² Percepatan sumbu Z 9 m/s² Percepatan sumbu Y 6 m/s² Kecepatan spindel 12.000 RPM Diameter spindel pada bantalan depan 80 mm Torsi S6-40% 210 Nm Penyangga alat HSK 63 Jumlah posisi alat 120 Mesin ini digunakan untuk memproses aluminium dan, menurut perkiraan kami, berada dalam kondisi bekas yang baik dan dapat diperiksa saat beroperasi setelah perjanjian dibuat. Fitur dan aksesori teknis: - Spindel ganda - 5 sumbu - Pengganti palet - Pelumasan jumlah minimal Aksesori, alat yang ditampilkan, dan perangkat penjepit hanya termasuk dalam ruang lingkup pengiriman jika hal ini disebutkan dalam informasi tambahan. Perubahan dan kesalahan dalam data dan spesifikasi teknis, serta penjualan antara waktu, dapat terjadi!

Kondisi: bekas, Tahun pembuatan: 1985, X-axis travel 560 mm Y-axis travel 450 mm Z-axis travel 450 mm Rotary table diameter 270 mm Rotary table tilting range 0 - 24° Spindle taper ISO 30 Spindle speeds 31.5 - 7100 rpm Feed rate 1 - 10,000 mm/min Control system SINUMERIK System 8 Number of tool magazine positions 40 Maximum tool length 255 mm Dedpfxetycfuj Afwowc Maximum tool weight 6 kg Total power requirement 32 kW Machine weight approx. 11.6 t = 5-axis machining center Accessories: various tool holders, coolant system

Kondisi: bekas, Tahun pembuatan: 2003, X-travel 780 mm y-travel 560 mm z-travel 560 mm Tool holder SK40 Control HEIDENHAIN iTNC 530 Machine weight approx. 12.5 t Space requirement approx. 3.40 x 3.30 x 2.60 m DECKEL MAHO DMC 60T Year 2003 Operating hours: 32,532.7 Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm The machine DMC 60T (1659) is in very good condition and is ideal for precise milling operations thanks to its high-performance motor spindles, high feed rates, and a flexible tool magazine. All technical details are listed below. Work tables NC rotary table - clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 mm deep Locating bore: diameter 20^H6 20 mm deep Torque on the table plate at: - 100% duty cycle: 1603 Nm - 25% duty cycle: 2813 Nm Max. rotation of table plate: 30 rpm Feed rate: 7200 mm/min Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servomotors in digital technology for axes X, Y, Z Feed rate X, Y, Z-axis steplessly programmable: 20-15,000 mm/min Rapid traverse X, Y, Z-axis: 50 mm/min Setup mode X, Y, Z-axis: 20-2,000 mm/min Measuring system Resolution | X, Y, Z-axis: 0.001 mm Dwjdpfx Aewm Rrwsfwsc Input unit | X, Y, Z-axis: 0.001 mm Position tolerance | X, Y, Z-axis: 0.010 mm Main drive 12,000 rpm: motor spindle without gearbox Main drive 18,000 rpm: motor spindle without gearbox Spindle speed Steplessly programmable: 20-24,000 rpm In setup mode: 20-800 rpm Weight Machine with tool changer and transport base: approx. 10,100 kg Installation weight Machine with fixed table and tool changer: max. 11,500 kg Total weight incl. belt filter unit: 12,400 kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Belt filter unit 900 l: 2.22 x 1.40 x 2.20 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Produsen: DMG Tipe: DMC 60 T Tahun Pembuatan: 2005 Pengontrol: Heidenhain iTNC 530 Berat Mesin: sekitar 9 ton Pemasangan Alat: SK 40 Langkah sumbu X: 780 mm Langkah sumbu Y: 560 mm Dwedpjz I Rfhefx Afwoc Langkah sumbu Z: 560 mm Rentang Kecepatan Putaran: 12.000 rpm Jumlah Alat di Majalah: 120 buah Penyaluran Pendingin Internal: 40 bar Probe Pengukur 3D: Heidenhain TS641 Jarak Gerak Sumbu C: 360° 5 Sumbu: x