Beli Mesin Press Pelubang Otomatis - Empat Kolom bekas (80.424)

Kondisi: bekas, excenter press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little-used single-column eccentric press in original condition Machine no.: 5250686 Year of manufacture: 1986, as-new condition Pressing force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Pass-through hole in table: 300 x 200 mm Table surface intermediate plate: 740 x 560 mm Pass-through hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Clamping height max.: 275 mm (with intermediate plate) Clamping height max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Nedoi A A Tbspfx Aa Usct Stroke rate: 100 strokes/min Motor power: 3 kW Drive power: 380 V, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake controlled via cam disc - Stroke actuation via pneumatic foot switch - Overload protection with shear plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication, BEKA lubrication technology - Operating manual and pneumatic diagram available Required space (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Very good, as-new condition

Kondisi: bekas, Single-Column Hydraulic Press SCHÖN Type FES / C 7 Machine No. 4281 Year of Manufacture: 1995 Press Force: 7 tons Throat Depth: 170 mm Throat Depth (Rotary Indexing Station): 60 mm Table Size: 310 x 200 mm Rotary Indexing Table: Ø 400 mm, with 12 indexing stations Ram Surface: approx. Ø 100 mm Ram Plate: 315 x 200 x 35 mm Ram Stroke: 100 mm Installation Height (Rotary Table to Ram Plate): max. 130 mm Table Height above Floor: 890 mm Ram Speed Rapid Down: approx. 300 mm/sec Ram Speed Rapid Up: approx. 300 mm/sec Ram Speed Working Feed: approx. 30 mm/sec Drive Power: 1.5 kW Power Supply: 380 Volt, 50 Hz Tank Capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 stations - Mechanically adjustable fixed stop - Adjustable pressure holding time at bottom dead center Ncedpfx Aasr I E Itj Uot - Electric two-hand control Required space (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1983, nomor mesin/kendaraan: 809.14, Penawaran 25461 Data teknis: - Gaya tekan maks.: 30 t - Pengaturan tekanan tekan - Langkah dapat diatur secara kontinu hingga 200 mm - Kecepatan langkah dapat diatur - Ketinggian pemasangan maks.: 450 mm - Meja mesin dengan alur T: L 800 x P 500 mm Ncodpfxsyff H So Aa Ujt - Jarak bebas antar tiang: 600 mm - Area meja yang dapat digunakan: L 800 x P 500 mm - Penggerak: 400 V / 11 kW - Kebutuhan ruang sekitar: L 1000 x T 2300 x P 1600 mm - Berat sekitar: 2500 kg

Kondisi: bekas, 1 Nsdpfxsv Srfwj Aa Ujct

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Punching force: 25 t (250 kN) Pass-through width: 1800 mm (1660 mm usable) Clear opening between uprights max./min.: 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic rail punching machine Hydraulic pressure: 250 bar Punch table area = 1830 x 500 mm Punch carriage/plate = 500 x 500 mm; Travel speed = 800 mm/sec; Punch stroke = 63 mm/s, Forward/reverse travel 125/125 mm/sec. Operation via control panel with pressure switch/control lever Equipment: 2x pneumatic feed rollers Ø 120 x 1630 mm, pneumatically operated open/close Ncsdpfxeu Szfue Aa Uot

Kondisi: bekas, Automatic eyeletting machine Hang 103 LOK Serial no. 24707 For small to medium batch production Nodpfx Asv D N H Nea Uect Working depth: 130 mm Piece counter Activation via electric foot switch Online video inspection possible via WhatsApp, MS Zoom, or Telegram. In stock in Emskirchen/Nuremberg - Available immediately - Test runs possible on site.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A4-10754, Used machine Refurbished and newly painted by a professional Electrical system newly installed by a switchgear specialist 6 months parts warranty Features: + Floor-standing machine, very robust and sturdy construction + Machine operated by engaging lever, single-handed operation + With rounding off function, suitable for square rolls + Cleaning position electrically controlled via toggle switch + Consistent dough portioning, excellent rounding performance + New stainless steel dividing knives (instead of the nickel-plated steel knives found in new machines!) + Fitted with a new dough ring + Machine fully disassembled, mechanically overhauled, and newly painted + Electrical installation redone by a specialist company + Dividing knives precisely fitted into newly coated knife head + Gear components operate continuously in an oil bath + Complete overhaul carried out at a German specialist company according to German quality standards + Only high-quality original parts are used + Final inspection with dough was carried out by our master baker and confectioner STANDARD equipment: + Includes 3x rounding plates, new Optional special equipment (available at extra cost): + Machine can be supplied with a new chassis, ideal for floor cleaning at the machine’s installation site Surcharge: €1,485 net (including installation) Nsdpfx Asivd Ezja Uect Technical Data: Number of pieces: 30 dough pieces Piece weight: 40 - 110 grams (depending on dough) Dough input: 1,200 - 3,300 grams (depending on dough) Higher dough input possible with unproofed dough Power: 1.6 kW Electrical connection: 400V - 3Ph - 50Hz Fuse: 16A CEE plug Dimensions: 69 x 80 x 147 cm (W x D x H) Net weight: 540 kg

Kondisi: baik (bekas), BSTA 18 Bruderer BBV Feed High performance: 600 spm Maximum press force: 180 kN Maximum strip width: 120 mm Feed: Bruderer BBV190 Completely overhauled with silicon Good condition Ncjdps Udtysfx Aa Uot More high-speed presses in stock: Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: Pressure: 63 t Frame opening: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 mm (W x L) Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Clearance between uprights: 550 x 540 mm Tank capacity: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration mounts: 880 mm Total power: 30 kW Ncjdpfju Icxqox Aa Uet Machine weight approx.: 3.9 t Hydraulic punching press for precision work (high-speed press) - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - With hydraulic gripper feed unit type HS 150 and 7-roller straightening unit (synchronized) - Suitable for standard strips of approx. 0.4 mm - 2.5 mm thickness x approx. 160 mm width, as well as narrow strips up to approx. 4 mm thickness. Feed length can be freely adjusted via the control system. - With ram round column guide - With automatic central lubrication - High-speed: up to 400 strokes per minute - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous stroke and/or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punch press has a control issue. Sale as is, as a donor for spare parts or as a replacement machine. In stock. *

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Equipment: - 1 right-hand gripper feed - 1 two-point eccentric press, 250 kN - 5 slide units Working area: Nedpfxovuzvds Aa Usct - Wire diameter range: 1.5 – 5.0 mm - Strip width: max. 50 mm - Feed length: max. 200 mm - Output: max. 450 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Equipment: 1 right-side gripper feed 1 eccentric press, 70 kN 3 narrow slide units 1 control shaft Working range: Wire diameter range: 0.5 - 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Ncjdpotmty Nsfx Aa Uot Performance: up to 400 cycles/min

Kondisi: baik (bekas), BIHLER GRM100 Stamping and Forming Machine, Nodpfepm H Hajx Aa Uoct Made in Germany. Machine originally refurbished by Bihler in 2010, upgraded with servomotor, pump, new wiring, new control system, etc. Equipped with 4 forming slides and 18-ton press station. Right-hand gripper feeder with straightening unit. Maximum strip width: 100 mm. Maximum wire diameter: 10 mm. Standard feed length: up to 250 mm. Maximum operating speed: approx. 135 strokes per minute. Servomotor. Touchscreen control. Air clutch. Weight: approx. 6,000 kg. Power supply: 400/480 V, 50 Hz. Additional high-speed presses from Bruderer, Schaal, and Mabu in stock. Also ideal butt-welding machines available.

Kondisi: bekas, Press hidrolik rangka ganda dari Hans Schoen. Tipe: UTE 50 Daya tekan: 50 t Daya motor: 5,2 kW Tinggi: 270 cm (dengan meja), 195 cm (tanpa meja) Lebar: 118 cm Kedalaman: 95 cm Pengoperasian dua tangan Ncedpfx Aaov Spl Us Ujt Mesin dapat dimuat menggunakan forklift. Lokasi: 59939 Oslberg Anda akan menerima faktur dengan PPN sebesar 7%.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Max. pressing force: 80 kN, stroke: 180 mm, power stroke: 12 mm, weight: 760 kg. Ncodpfx Aaoifptye Ust

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), Max. ram force: 1600 kN, length: 3170 mm, width: 2500 mm, height: 5080 mm, weight: 23 t, supplied with documentation. Nsdpfjlc N Ryjx Aa Uect

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Pressing force: 3200 kN, stroke: 700 mm, table dimensions: 2500 x 1300 mm, weight: 63 t, with documentation. Nedpfxelc N R De Aa Uect

Kondisi: sangat baik (bekas), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feed Plain text display Force monitoring Wire straightening device Bosch wire stripping units Holder and brush motor with mounted tool W32/1-32 Soundproof enclosure Drums of copper wire with stamped parts Control cabinet Drive power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / bending slide: 80 kN Press force / punching unit: 200 kN Feed lengthwise: 2050 mm Njdsg T S Ttspfx Aa Usct Band width lengthwise: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrics (LxWxH): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer’s description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of mezzanine floors, pallet racks, shelving racks, vertical carousels. High-quality industrial machinery: lathes, grinding machines, handheld machines. Financing through our bank is possible as well. komplett-konzept.leasingo.de Find more new and used items in our shop! International shipping costs on request!

Kondisi: sangat baik (bekas), de-to-hu Ncedpfx Aajh I Nrqj Uot

Kondisi: baik (bekas), Pressure: 25 t Cutting capacity (thickness / width): 1.25 / 140 mm Nedsfim Dwepfx Aa Ujct Strokes per minute, min./max.: 250 spm Ram stroke, max.: 20 mm Table surface usable (W x D): 440 x 360 mm

Kondisi: baik (bekas), Table size: 350x350 mm Ncodpjfm A Amefx Aa Ust

Kondisi: baru, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Italy Price: €132,500 Leasing rate: €2,504.25 Pressing force: 200 t Stroke: 500 mm Distance between columns: 1250 x 1000 mm Installation height: 600 mm Rapid traverse: 25 mm/s Working speed: 3.5 mm/s Motor: 7.5 kW Length: 1550 mm Width: 1300 mm Ncodpfx Ajwiq Abea Uot Height: 2700 mm 4-column guide Round ram guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual OPTIONS: Light barrier € on request Siemens touchscreen control system, memory for 50 programs, programmable for: - Upstroke and downstroke quota - Dwell time at the bottom - Decompression time - Working pressure setting - Piece counter - Pre-stop in upstroke and downstroke - Setting for manual and automatic operation - Management of alarms and anomalies € on request Hour meter € on request Piece counter € on request Decompression valve € on request Oil cooler with decompression valve € on request Pressure switch € on request

Kondisi: baru, condition new delivery time approx. 4 months from order placement country of origin Italy price €172,500 leasing rate €3,260.25 pressing force 300 t stroke 500 mm distance between columns 1250x1000 mm installation height 600 mm rapid traverse 22 mm/s working speed 2 mm/s motor 7.5 kW length 1750 mm width 1500 mm height 2800 mm Nodjwir Acepfx Aa Usct 4-column guide ram guide round table and ram with T-slots 2-hand operation Siemens PLC pressure gauge operating manual OPTIONS: light curtain € on request Siemens touchscreen control, 50 programs storable, for programming of: - upward and downward stroke quotas - dwell time at bottom - decompression time - working pressure setting - piece counter - Prestop in upward and downward movement - setting for manual and automatic operation - management of alarms and faults € on request hour counter € on request piece counter € on request decompression valve € on request oil cooler with decompression valve € on request pressure switch € on request

Kondisi: baru, EN: Pressure: 100 Stroke: 300 mm Ram surface: 600 x 900 mm Table surface: 700 x 1100 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 8 mm/s Return speed: 165 mm/s Motor: 11 kW Including light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating 4-way ram guides Clamping plate with T-slots Design in accordance with CE regulations Press force: 100 t Pressure: 240 bar Table: 1100 x 700 mm Ram dimensions: 900 x 600 mm Table bore: 120 mm Stroke: 300 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 8.5 mm/s Return speed: 165 mm Motor: 11 kW Length: 2,180 mm Width: 1,600 mm Ncedpfx Asd Ab Ihja Ujt Height: 3,150 mm Weight: 6,500 kg

Kondisi: baru, Ziekissen stroke: 200 mm Installation height: 600 mm Pressure: 60 bar Ncsdsd Ab Iispfx Aa Ust Stroke: 350 mm Light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating quadruple ram guides Clamping plate with T-slots Design according to CE regulations (Symbolic photo) Pressing force: 60 t Pressure: 170 bar Table size: 1000 x 600 mm Ram dimensions: 850 x 550 mm Table bore: 100 mm Stroke: 350 mm Installation height: 600 mm Rapid traverse: 100 mm/s Working speed: 10 mm/s Return speed: 165 mm/s Motor: 11 kW Drawing cushion: Pressing force 24 t; stroke 150 mm; pressure 156 bar; return speed 65 mm/s dimensions: 300 x 300 mm Length: 1,670 mm Width: 1,520 mm Height: 3,000 mm Weight: 7,000 kg

Kondisi: baru, Drawing cushion stroke: 200 Drawing cushion Manual and automatic operation Self-lubricating ram guides Manufactured according to CE regulations Light barrier Pressing force: 30 t Pressure: 160 bar Table: 900 x 600 mm Ram dimensions: 800 x 500 mm Table bore: 80 mm Stroke: 300 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 18 mm/s Return speed: 165 mm/s Motor: 11 kW Drawing cushion: Pressing force 12 t; Stroke 150 mm; Pressure 130 bar; Return speed 100 mm/s Ncedpfx Aasd Ab Iks Uet Dimensions: 250 x 250 mm Length: 1,670 mm Width: 1,520 mm Height: 2,850 mm Weight: 6,000 kg