Beli Ror Tmt 9 Tons Traileraxle Single Tires. bekas (38.896)

Kondisi: bekas, warna: lain, pendaftaran pertama: 08/2004, Tahun pembuatan: 2004, Nomor seri: TIDAK DIKETAHUI Kami memiliki stok lebih dari 100 as roda. Ijdpfx Aew Tkxcspnsif Silakan hubungi kami jika Anda tidak menemukan yang Anda cari.

Kondisi: bekas, warna: lain, Wir verfügen über einen Bestand von mehr als 100 Achsen. Bitte kontaktieren Sie uns, falls Sie nicht das passende Modell finden. Iiedpfx Aju Atynspnsf

Kondisi: bekas, warna: lain, pendaftaran pertama: 09/2005, Tahun pembuatan: 2005, Numéro de série : sans gabarit Nous disposons d’un stock de plus de 100 essieux. Isdpfjxf Irvox Apnjif N’hésitez pas à nous contacter si vous ne trouvez pas ce que vous recherchez.

Tahun pembuatan: 2015, Kondisi: bekas, Tahun pembuatan: Jan 2015 Baru: Tidak Per daun trailer yang sangat baik untuk as BPW Ijdpfsyb Sb Ujx Apnsif

Kondisi: bekas, warna: lain, pendaftaran pertama: 04/2005, Tahun pembuatan: 2005, Numéro de série : sans gabarit Nous disposons d’un stock de plus de 100 essieux. N’hésitez pas à nous contacter si vous ne trouvez pas ce que vous recherchez. Iijdpfx Aey Efv Uepnof

Kondisi: bekas, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture: approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table dimensions: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Iiedpfxodzp Trs Apnef Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion under the table with bores through the table plate - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 tons The machine is functional; however, the control cabinet is mechanically damaged. During the test run, the machine achieves a pressing force of 50 tons, possibly due to a pressure relief valve discharging.

Kondisi: bekas, Tahun pembuatan: 2009, nomor mesin/kendaraan: Bongard Cervap 600/9.222, en Iiedpfx Apsy Du I Djnef

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 160 t, panjang langkah: 200 mm, lebar meja: 750 mm, panjang meja: 1.100 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Presses are mechanical presses powered by force generated via an eccentric mechanism, commonly used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame construction. CRONOSSTECH CEHP-TB-160 – H-Type Eccentric Press 160 Ton, is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, eight-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable and repeatable production with 1100×750 mm table size - Die/equipment protection with hydraulic overload safety system Iijdpfx Apex N Sblonsf - Controlled and user-friendly operation via PLC + touchscreen - Enhanced operator safety with light curtain protection - Low maintenance needs with automatic lubrication infrastructure Applications - Punching / cutting / die forming applications - Series production with automatic feeding lines - High-volume production processes STANDARD FEATURES • Steel frame construction • Pneumatic clutch-brake system • Additional T-slotted bolster plate • Eight-point guided ram • Adjustable stroke on single connecting rod • Ram balancer piston • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor motion • Hydraulic overload safety • Motorized ram adjustment system • Light curtain safety guard • Enclosed oil reservoir with gear set • Dual-coil safety valve • CE compliance OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety door in front of the table • Custom die options TECHNICAL SPECIFICATIONS (CEHP-TB-160) Capacity: 160 Ton Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 120 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4600 mm Table Dimension: 1100×750 mm Ram face size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 22 kW Weight: 18,000 kg PRODUCTION/SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed exclusively by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slide H-frame design ensures balanced distribution of the high loads generated during pressing, guaranteeing stable and repeatable operation. Model CHP 500 is engineered for long-lasting and reliable performance in heavy-duty production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty conditions. The frame and load-bearing components are stress-relieved through vibration. Bronze Zr14 slide bearings ensure smooth load distribution and long-term precision throughout the ram’s travel. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - Welding applications approved for WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Display of hydraulic unit oil temperature and system status on-screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-slide H-frame press Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 500 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Clearance: 100 mm Max. Clearance: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR & WPS certification accredited by TÜRK-AK according to EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Iisdpox N T H Ajfx Apnof Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 5800 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1000 H-Frame Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, providing maximum rigidity, precision, and long service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered to withstand the demanding conditions of heavy industry. The frame and main supporting structures are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame structure by vibration • Bronze Zr14 guide bushings • WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination indicator • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand control system • Light curtain (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified by TÜRK-AK for WPQR and WPS Max. Working Pressure: 250 Bar Iijdpfx Apjx N T Rbonsf Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table - Fast Approach Speed: 150 mm/sec Moving Table - Pressing Speed: 12 mm/sec Moving Table - Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Distance from Floor to Lower Table: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.200 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Way Guided General Description The CRONOSSTECH CHP Series H-Type Hydraulic Deep Drawing Presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-way guided H-frame structure ensures maximum rigidity, stability, and precision under high tonnage loads. The CHP 1200 model delivers reliable and long-lasting performance for demanding industrial production lines requiring high force. The frame is stress-relieved by vibration, ensuring even load distribution during pressing operations and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-way guided H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slideways - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Iisdpfx Asx N T Rujpnof - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-way guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration-based stress relieving Welding Application: WPQR and WPS certified welding, accredited by TÜRK-AK and compliant with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø560 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 6100 mm Approximate Press Width: 3550 mm Approximate Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.500 t, panjang langkah: 1.000 mm, lebar meja: 1.800 mm, panjang meja: 2.600 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description Isdpfx Apox N T S Esnsif The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and metal spinning applications that require extremely high tonnage. The 8-slide H-frame design ensures maximum rigidity throughout the pressing operation, maintaining parallelism and squareness tolerances consistently over long strokes. The CHP 2500 model features large table dimensions, a multi-cylinder main pressing system, and a high-capacity hydraulic unit, making it suitable for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8-guided slides - Vibration stress-relieved welded frame - Bronze Zr14 slide bearings - Welded joints approved by WPQR and WPS in accordance with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touchscreen control panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 - Type: Steel construction, H-frame with 8-guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2500 Tons - Moving Table Size: 1800 × 2600 mm - Fixed Table Size: 1800 × 2600 mm - Parallelism Tolerance: 120 microns/m - Squareness Tolerance: 60 microns/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: By vibration - Weld Certification: WPQR and WPS certified by TÜRK-AK, per EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Rapid Down Speed (Moving Table): 150 mm/s - Forming Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø565 mm – Ck45 (4 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6500 mm - Approx. Press Width: 3950 mm - Approx. Press Depth: 2600 mm - Bed Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Control Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a robust steel construction. The 8-guide H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered for heavy-duty use. The frame and supporting components are stress-relieved via vibration methods. The slide bearings use bronze Zr14 material, providing long-lasting and stable operation. Key Advantages - 8-guide H-frame structure - Stress-relieved steel construction via vibration - Welding procedures compliant with ISO standards - PLC control with touchscreen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved frame and support parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Dual-hand operator control system - Light curtain safety barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 600 mm Stress Relief: Vibratory stress relief Welding: EN ISO 15614-1/2017 certified by TÜRK-AK accreditation with WPQR and WPS approval (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height Above Floor: 1250 mm Isdpjx N Tx Sofx Apnoif Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-guide H-frame body, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is engineered for applications requiring medium to high tonnage, with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and carrier components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth ram movement and long-term precision stability. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press body - Stress-relieved body and carrier parts via vibration - Bronze Zr14 slide bushings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically-controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS and SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration Welding Application: TÜRK-AK WPQR and WPS certified welding (with EN ISO 15614-1/2017 welding application certificate, supervised by certified welding coordinators according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 8 Tons Production Note Iisdpfxex N T D Uo Apnsf This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety due to their rigid frame construction. The CRONOSSTECH CEHP-TB-250 H-Type Eccentric Press 250 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance under continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety device - Controlled and user-friendly operation via PLC and touchscreen interface - High operator safety with light curtain protection - Low maintenance requirements due to automatic lubrication system Applications - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high tonnage production processes STANDARD FEATURES - Steel construction frame - Pneumatic clutch and brake - T-slotted auxiliary bolster plate - 8-point guided slide - Adjustable stroke with single connecting rod - Balancer piston on slide - Fully automatic fine lubrication system - PLC control system - Piano-type control panel - Touchscreen LCD display - Reverse motion motor - Hydraulic overload safety device - Motorized slide adjustment mechanism - Light curtain protection - Enclosed gear group in oil reservoir - Dual-coil safety valve - CE conformity OPTIONAL FEATURES - Press feeding systems Iijdpfx Ajx N Sc Ajpnef - Scrap ejection systems - Sliding safety guard at table front - Custom die options as requested TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Dimension: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 31,000 kg PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 150 H-Frame Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 guiding slides ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long-term use for medium tonnage applications. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty usage. The frame and supporting parts are stress-relieved through vibration. Bronze Zr14 guide bushings provide smooth load transfer and long-term stability. ⚙️ Standard Equipment • Steel construction, 8-slide guided H-frame press body • Stress-relieved frame and supporting parts by vibration • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and production in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status Iedsx N T Dzjpfx Apnsif • Cooling system • Off-line filtration • Two-hand control system • Light barrier (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relieving: Vibration stress relieving Welding Application: WPQR and WPS certified welding accredited by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial solutions designed for sheet metal forming, straightening, assembly, and die press applications. The 8-guided H-frame construction ensures even distribution of high loads during pressing, delivering stable and repeatable performance. The CHP 400 model is engineered to provide durable and reliable operation for heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are designed for demanding industrial use. The frame and supporting components are stress-relieved via vibration. Bronze Zr14 guide bushings allow for smooth load distribution during ram movement, contributing to long-term repeatability and precision. ⚙️ Standard Equipment Iiodex N T Hpspfx Apnjf - Steel construction, 8-guided H-frame press body - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 guide bushings - WPQR & WPS welding procedures approved by TÜRK-AK-accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and built in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration unit - Two-hand operation control - Light curtain (operator safety – standard) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Ram Capacity: 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Qualification: EN ISO 15614-1/2017, WPQR & WPS approved/certified by TÜRK-AK, supervised by certified welding coordinators (EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Fast Descent Speed of Moving Table: 150 mm/s Pressing Speed of Moving Table: 12 mm/s Return Speed of Moving Table: 170 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 800 t, panjang langkah: 800 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures balanced distribution of high forces during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy industrial conditions. The frame and main structural components are stress-relieved using vibratory methods. Bronze Zr14 guide bearings ensure even load distribution and precision operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame via vibration - Bronze Zr14 guide bearings - WPQR & WPS approved welding in accordance with TÜRK-AK certified procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Ijdpfx Apox N T Nkenoif Max. Daylight: 900 mm Stress Relief: Vibratory stress relieving Welding Method: EN ISO 15614-1/2017 welding application certificate (approved by TÜRK-AK WPQR and WPS), supervised by certified welding coordination engineers per EN ISO 14731 Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Machine Height: 6000 mm Approx. Machine Width: 3350 mm Approx. Machine Depth: 2700 mm Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guideway H-frame structure provides maximum rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances throughout the entire long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and robust motor, is a reliable and long-lasting solution for the automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment - Welded steel construction, H-frame body with 8 guideways - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - Hydraulic power unit oil temperature and system status monitoring on display - Cooling system Iodpex N T Srefx Apnsif - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2000 - Type: Welded steel construction, H-frame body with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bushings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Stress Relief: Vibratory stress relief - Welding Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 - Max. Operating Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø720 mm – Ck45 (2 units) - Auxiliary Speed-Up Cylinders: 2 units - Approx. Height: 6300 mm - Approx. Width: 3850 mm - Approx. Depth: 2500 mm - Table Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 125 t, panjang langkah: 200 mm, lebar meja: 750 mm, panjang meja: 1.100 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, An eccentric press is a mechanical press type driven by an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process security thanks to their rigid frame structures. The CRONOSSTECH CEHP-TB-125 – H Type Eccentric Press 125 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With a monoblock frame, 8-guide ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Highlighted Advantages - Stable and repeatable production thanks to 1100×750 mm table size - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation with PLC + touch screen - High operator safety through light curtain protection - Low maintenance requirements with automatic lubrication system Applications - Punching / cutting / die forming operations - Serial production with automatic feeding lines - High-volume production processes Standard Features • Steel construction frame • Pneumatic clutch brake • Additional T-slotted platen • 8-guide ram • Adjustable stroke on single connecting rod • Ram with counterbalance piston • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD • Reverse motor operation • Hydraulic overload safety • Motorized ram adjustment mechanism • Light curtain safety guard • Sealed oil reservoir with gear unit • Double-coil safety valve • CE conformity Optional Features • Press feeding systems • Scrap material ejection systems • Sliding safety cover in front of table • Molds/dies custom-built to specification Technical Specifications (CEHP-TB-125) Capacity: 125 Tons Table–Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Dimension: 1100×750 mm Ram face size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg Manufacturing / Supply Note Iisdpfx Apsx N R U Ronsf This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled entirely by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, masa garansi: 24 bulan, Excentric press is a type of mechanical press that operates with a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability due to their rigid frame structures. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, die protection, and operator safety. With its monoblock frame, 8-guided ram system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance suited for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety device - Controlled, user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain - Low maintenance requirement thanks to automatic lubrication infrastructure Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch & brake • Additional extra plate with T-slots • 8-guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety system • Gear group in sealed oil reservoir • Double-coil safety valve Isdpfxsx N Scce Apnsif • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Special dies as requested ✅ TECHNICAL DATA (CEHP-TB-200) Capacity: 200 Ton Table-ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimension: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 300 H-Frame Single-Acting Hydraulic Press - 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial solutions engineered for high rigidity in sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, the high loads generated during pressing are evenly distributed, providing stable and repeatable operation. The CHP 300 model is designed to deliver durable and reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are designed for heavy-duty operations. The frame and support components are stress-relieved via vibration. Bronze Zr14 slide bearings ensure uniform load distribution during ram movement, helping to maintain long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and support parts via vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding (with TÜRK-AK accreditation) (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning Ijdpfjx N T E Esx Apnoif - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guide H-frame body Frame Material: St52 – ERDEMIR Slide Bearing: Bronze Zr14 Capacity (Ram): 300 tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration method Welding Certification: WPQR & WPS certified by TÜRK-AK, meeting EN ISO 15614-1/2017, supervised by welding coordination engineers certified according to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Machine Height: 4400 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Main Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.500 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.400 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, metal spinning, and heavy-duty forming applications requiring high tonnage. The 8-guided H-frame structure ensures maximum rigidity and stability during pressing, maintaining parallelism and perpendicularity tolerances consistently. The CHP 1500 model, with its large table dimensions, robust hydraulic system, and substantial stroke capacity, provides a reliable solution for the automotive, defense, heavy metal forming, and industrial manufacturing sectors. The frame structure is stress relieved via vibration to ensure long-term, stable operation. ⚙️ Standard Equipment • Steel construction, H-frame body design with 8 guides • Stress-relieved frame by vibration • Bronze Zr14 slide bearings • WPQR and WPS certified welding approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • CE-compliant design and manufacturing • PLC-controlled hydraulic system • Touch panel screen (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter clogging warning system • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1500 • Type: Steel construction, 8-guided H-frame body Ijdpfx Apex N T R Ueneif • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 1500 Ton • Moving Table Dimensions: 1500 × 2400 mm • Fixed Table Dimensions: 1500 × 2400 mm • Parallelism Tolerance: 120 micron/m • Perpendicularity Tolerance: 60 micron/m • Stroke (Ram): 1000 mm • Min. Die Opening: 200 mm • Max. Die Opening: 1200 mm • Stress Relief: Vibratory stress relief • Welding Certification: TÜRK-AK-accredited WPQR and WPS, EN ISO 15614-1/2017 • Max. Working Pressure: 250 Bar • Total Motor Power: 90 kW – IE3 • Main Pump: 101 cm³ – REXROTH or PARKER • Rapid Approach Speed (Moving Table): 150 mm/s • Drawing Speed (Moving Table): 12 mm/s • Return Speed (Moving Table): 170 mm/s • Main Cylinder Bore: Ø620 mm – Ck45 (2 pcs) • Auxiliary Fast-Return Cylinders: 2 pcs • Approx. Machine Height: 6250 mm • Approx. Machine Width: 3750 mm • Approx. Machine Depth: 2500 mm • Bottom Table Height from Floor: 1500 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touch Panel Screen: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 70 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 1.400 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press that operates through a crank mechanism, generating force for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H-Type Eccentric Press 300 Ton is engineered for high-volume production with a focus on stable operation, die protection, and operator safety. Its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production. Key Advantages: Iodpex N Sdmefx Apnoif - 1400×1000 mm table size for stable operation with large dies - Die/equipment protection with hydraulic overload safety - Controlled, user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection - Low maintenance requirement thanks to automatic lubrication Applications: - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake unit • Additional plate with T-slots • 8-point guided slide • Adjustable stroke with single connecting rod • Counterbalance piston in slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload protection • Motorized slide adjustment system • Light curtain safety guard • Enclosed gear unit with oil bath • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material evacuation systems • Sliding safety guard in front of the table • Custom dies upon request ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 1430 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 2550 mm Press Height: 4700 mm Table Dimension: 1400×1000 mm Ram Face Size: 1400×1000 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 35,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 250 H Frame Single-Acting Hydraulic Press – 8-Guided Slide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die-pressing applications. Thanks to the 8-guided H-frame design, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 250 model is engineered to deliver long-lasting and reliable performance for medium-to-high tonnage production processes. CHP Series – Structural Features CHP series presses are designed for heavy-duty conditions. The frame and supporting components are stress-relieved via vibration. Bronze Zr14 slide bearings ensure uniform load distribution during ram movement, contributing to sustained precision over long-term use. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved body and supporting components via vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured according to CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 250 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK, conforms to EN ISO 15614-1/2017, supervised by certified welding coordinators per EN ISO 14731 Max. Operating Pressure: 250 bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/sec Pressing Speed: 12 mm/sec Return Speed: 170 mm/sec Main Cylinder Bore Diameter: Ø360 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 4,200 mm Approx. Width: 3,250 mm Iodpfjx N T Elsx Apnoif Approx. Depth: 2,200 mm Table Height from Floor: 1,350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touch Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.