Beli Sealed Air Mesin Pengemasan Bantalan Busa bekas (96.218)

Kondisi: baik (bekas), Endoline 221 Kartonaufrichter, geeignet für Kartons mit einer Länge von 200–500 mm, einer Breite von 150–400 mm und einer Höhe von 175–600 mm, verarbeitet standardmäßig bis zu 16 Kartons pro Minute. Lodju S R Avepfx Alkerk

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, 1 Lrsdpsy Hdi Asfx Alkok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, 373 MESIN bekas pengemas tipe flow pack. DIMENSI EKSTERNAL (dalam cm): - tinggi: 185, - lebar: 115, Ljdpfx Aloy E E Nuokork - panjang: 236, - lebar sabuk: 20. Perangkat siap untuk inspeksi tersedia di gudang kami (36-068 Bachórz, Polandia). Opsi berbayar yang tersedia: transportasi Harga yang tertera adalah harga netto untuk satu unit oven. KAMI BERBICARA BAHASA INGGRIS, JERMAN, PERANCIS, RUSIA, UKRAINA. Dalam penawaran kami, Anda dapat menemukan oven roti, oven rak, oven deck, oven pastry, oven toko, mesin bakery, lini produksi roti, lini produksi roti kecil, lini produksi kue, lini croissant, mesin baguette, mixer adonan, mixer, mesin penggilas, mesin pembentuk croissant. Lihat semua iklan kami.

Kondisi: bekas, Tahun pembuatan: 2020, Becker BZ-2 - Packaging System - 2 identical, mirrored packaging lines available - without cutting machine - Year of manufacture: 2020 The system first trims the front edge of the cardboard to remove any potential transport damage. After edge trimming, a side trim of at least 30 mm is performed on both sides. If required, a corner of the cardboard is also cut off, depending on the FEFCO type. Finally, the cardboard is creased at the folding points and conveyed out of the machine. Any waste generated is removed from the machine by a waste belt located underneath. At the machine’s outfeed, a conveyor belt transfers the waste into a container. If the edge trim is too long, it must be cut inside the system so that it can be easily transported out of the unit. The blanks and products are conveyed to the folding table, where the cartons are set up and filled. In the Box Closing Unit, the cartons are closed, labelled, and discharged from the system. Machine Components (see diagram): (1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: Lrsdjygipmopfx Alkek Packaging dimensions (closure on top): - Min. carton dimensions (LxWxH): 500 x 120 x 100 mm - Max. carton dimensions (LxWxH): 2250 x 420 x 320 mm - Max. product weight: 50 kg Packaging dimensions (closure on side): - Min. carton dimensions (LxWxH): 300 x 150 x 120 mm - Max. carton dimensions (LxWxH): 1050 x 620 x 470 mm - Max. product weight: 50 kg Installation: - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Main fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Noise level: < 70 dB(A) - Machine dimensions (WxHxD): 21260 x 4000 x 18030 mm

Kondisi: bekas, Tahun pembuatan: 2019, Mesin pemotong jet air dengan Plasma Produsen: TCI Cutting Tipe: BP-C 4020 Tahun pembuatan: 2019 Kontrol CNC: TCI CNC 4.0 Area kerja: 4x2 m Perlengkapan: 1 kepala pemotong KMT OEM SL-VI 50 HP 4.000 bar dengan pompa tekanan tinggi 1 kepala pemotong plasma dengan sumber daya Hypertherm XPR300 Sistem kontrol tegangan tinggi TCI SRA 4.0 Sistem transfer abrasif Sistem pengukur abrasif Sistem perlindungan tabrakan Sistem pengolahan air TCI HIDROSYSTEM 2.0 Lrsdjykqwtspfx Alksk Sistem pembuangan lumpur Perangkat lunak Lantek Expert 2D dengan fungsi nesting otomatis 16426ä

Tahun pembuatan: 2026, Kondisi: baru, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper filling systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions ("paper bubble cushions") with excellent shock absorption properties. Ideally suited for professional packing stations, logistics centers, and large-scale e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. Thanks to its automatic length control and optional rewinding mode, the V540E can produce both loose cushion pads and complete cushion rolls for storage or further processing. Advantages: The VOGEL V540E stands out as a powerful, automated paper cushioning system and ranks among the most efficient in its class. It processes wide paper rolls (up to 500 mm) and generates first-class, 3D-structured paper pads with excellent cushioning properties. Perfect for professional packing stations, logistics centers, and large e-commerce environments that need an eco-friendly, high-throughput, and cost-conscious substitute for traditional air bubble film. With automatic length control and optional rewinding functions, the V540E can manufacture both individual cushion segments and entire cushion rolls for bulk storage or downstream processing. Special features: - Simple operation - Excellent price/performance ratio - Optional rewinding station / automated production of cushion rolls - Ideal replacement for air bubble film - 100% recycled paper Our service—building genuine partnerships: - Free technical hotline - Long-term spare parts availability - 99% of spare parts delivered within 24/48 hours - We supply the appropriate consumables! About us: Ljdoy Drqvopfx Alkork Since the early 1980s, we have gained hands-on expertise in handling packaging machinery. This makes us true specialists—not just with the machines themselves, but also with their operation, advantages and limitations, applications, consumables, and overall cost-effectiveness. We are committed to sharing all this experience with our customers. For example, beware: making errors when selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Kondisi: bekas, Tahun pembuatan: 2012, Mesin bantalan udara Fromm Airpad Produsen: Brüninghaus Tipe: AP 502 Tahun pembuatan: sekitar 2012 Material film: Film komposit PA/PE atau film polietilen (100% dapat didaur ulang) Koneksi udara bertekanan: NW 10/4 - 8 bar; maks. 82 Nl/menit (saat produksi bantalan): maks. 3,5 Nl/siklus Kapasitas: 25 – 49 siklus/menit (tergantung pada jenis film dan ukuran bantalan) Koneksi listrik: 230 VAC; 50/60 Hz; 16 A; 2,0 kVA Dimensi (PxLxT): 1.600 x 767 x 1.292 mm Berat: 230 kg Aksesori / perlengkapan khusus: • Program yang disimpan untuk berbagai ukuran bantalan • Pergantian program dengan sekali tekan tombol • Produksi individual dari 4 cm hingga 16 cm panjang dengan tingkat pengisian tertentu Lrjdpfx Alswulylskjk • 10 program tersedia untuk penyimpanan beberapa parameter

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 21-2584 BE ATS, jenis arus masuk: tiga fasa, tinggi total: 1.680 mm, tegangan masuk: 400 V, lebar total: 2.950 mm, panjang total: 1.800 mm, kebutuhan udara: 38 m³/jam, Perlengkapan: dokumentasi / manual, Description: For sale: Automatic Cartoning Machine SOCO PACK BE-2200 ATS (RIGHT) High-speed automatic carton erector with bottom taping module and conveyor Basic Information: Model: SOCO BE-2200 ATS RIGHT Type: Automatic carton erector with bottom tape sealing Version: Right-hand (RIGHT) with CE enclosure Condition: New / very well maintained, ready for immediate operation Location: EXW Prešov, Slovakia Technical Specifications: Capacity: High-speed operation – suitable for fully automated lines Power supply: 3 x 400 V AC, 50 Hz, 0.5 kW Air consumption: 38 l/cycle, min. 6 bar Lrjdpfxjy Exa Hj Alkjk Discharge height: Adjustable: 560 – 850 mm Pneumatic components: FESTO Control system: Siemens S7-1200 PLC with touch panel and Ethernet connection Control languages: English, German, Slovak Equipment and Features: Automatic bottom carton taping Horizontal motorized carton magazine (length 1500 mm, capacity approx. 190 cartons) Magazine adjustment with counter and hand crank – fast format changeover Touchscreen control panel with cycle counter, alarms, and demo mode Safety sensors with end-of-conveyor alarm Pneumatic stopper system A-60 + powered roller conveyor (1230 mm, height 490–700 mm, speed 20 m/min) Color: RAL 9006 (aluminum grey, powder-coated finish) Accessories: Expansion kit for 0.5 L and 0.7 L cartons Brush for feeding square cartons Vacuum suction cups (2 pcs) – cover a full range of required dimensions Spreader for bottom flaps – suitable for weaker or 5-ply cartons Tape monitoring sensor (optional): detects empty tape, tape break or incorrect tape application

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 9.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.530 mm, jarak lintasan sumbu Y: 2.010 mm, jarak gerak sumbu Z: 250 mm, jenis arus masuk: tiga fasa, tekanan: 4.100 batang, arus masuk: 80 A, daya motor servo: 37.000 W, tahun perombakan terakhir: 2009, Mesin Water Jet NCP4020D, unit kontrol FANUC 310iA, perangkat lunak IGEMS CAD/CAM, KMT Jet-line, 50 HP, 3,8 l/menit, 4100 bar, bejana tekan 200 l, dan konveyor abrasif online/kontainer abrasif online 1 ton. Dimensi meja (L x P): 4200 x 2275 mm, Area pemotongan (L x P): 3980 x 2010 mm, - Perjalanan sumbu X (2D): 3530 mm, - Perjalanan sumbu Y (2D): 2010 mm, Perjalanan sumbu Z: 250 mm. Data pompa HP: - KMT 50, Jetline, 4100 bar - 37 kW, pemutus sirkuit di 400/50 Hz, 80 A. Lrjdoy Epiiopfx Alkok

Kondisi: baik (bekas), Tahun pembuatan: 2012, pneumatische-doppelmembranpumpe-cobra-40-10 Lrjdpfxjy A Tqbo Alkok

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: FA55, Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packaging machine that collates containers into bundles and then packages them on a corrugated tray with film overwrap. The unit is configured for wrap + film on tray and operates with a straight (inline) product infeed. It is suitable for a wide range of containers from 0.5 L to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. Manufactured in 2008 and fully overhauled in 2022, the unit is considered ready for operation. Operating Mode: Automatic Infeed Layout: Straight infeed (inline) Packaging: Tray pack with clear film overwrap Format Range: 0.5 – 10 L Machine Configuration: Delivered without infeed conveyor system (to be provided by the line integrator) Year of Manufacture: 2008; Overhauled: 2022 Typical process sequence: Collation of products inline, pick-up and forming/wrapping of tray blanks around the product group; application of neutral film and sealing; discharge for further handling. This configuration ensures robust stabilization of the tray with protective film wrap, suitable for distribution and palletizing. Technical Data Model: COMBIGIOTTO 90-M Manufacturer: ATLANTA Operating Condition: Ready for use Packaging configuration: Wrap + film on tray Film: Neutral Trays: Available (tray packaging configuration) Lredpfx Asxdnbzslkek Infeed Type: Straight (inline) Format capabilities: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control system with HMI for recipe and setpoint management (format parameters stored for repeatability). Speed regulation via frequency inverter/servo drives for synchronizing infeed, collation, tray wrap, and film application. Integrated diagnostics, alarm history, and counters (shift/batch totals). Typical sensors: product presence, jam detection, end of film roll, tray blank level, safety interlock status. Electrical protection rating: IP54 for electrical system and motors. Line Integration Container infeed: Not supplied with this machine. The packaging machine requires a stable, synchronized pre-feed from the line (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies integration with fillers, labellers, and downstream conveyors. Standard interface signals (typical): machine ready, start permit, emergency stop loop, fault, upstream/downstream handshake. A detailed I/O list can be provided during integration. Discharge prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project planning). Condition & Maintenance Overall status: Ready for use. Full overhaul completed in 2022 to restore full functionality. Recommended preventive maintenance: periodic inspection of the film path and seals, collation guides, tray magazine mechanism...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, nl-hu-001 Lrjdpsy Aw S Aefx Alksk

Tahun pembuatan: 1994, Kondisi: baik (bekas), Mesin pengemas Ilapak - bekas - tahun pembuatan 1994 Lredpfx Aloy Efameksk - model DUE S - mesin berasal dari produksi, lengkap dan berfungsi dengan baik - pengambilan dari gudang / opsi pengiriman tersedia - harga 4.000 € EXW

Kondisi: baru, Tahun pembuatan: 2024, Automatic tray sealing machine suitable for closing various types of trays. Capable of Modified Atmosphere Packaging (MAP) and vacuum sealing. Cycling rate: 12 cycles/minute (speed depends on tray size and product characteristics) Tool length: 750 mm Lredpfsr A Euxjx Alkjk Tray output per cycle: - Tray 227×178 mm – 4 units per cycle - Tray 187×137 mm – 5 units per cycle - Tray 205×160 mm – 4 units per cycle - Tray 325×264 mm – 2 units per cycle Machine weight: 800 kg Compressed air: 6–8 bar Power supply: 3×400/230V VAC 50 Hz

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.400 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.000 mm, Dijual mesin pemotongan waterjet MicroStep WaterCut 2001.30W, kondisi sempurna, produksi tahun 2023. Mesin dilengkapi dengan pompa tekanan tinggi BFT Ecotron 40.37 – 4000 bar dan 37kW, salah satu pompa terbaik dan paling andal di pasaran. Spesifikasi utama: - Area kerja: 2000 x 3000 mm - Kepala potong: 3-sumbu dengan sensor anti-tabrakan Lodpfx Asy Ecr Hslkork - Total jam kerja: sekitar 1400 jam Mesin dijual sebagai paket lengkap, siap operasi, termasuk: - Pengumpan abrasif 1 ton (Allfi) - Sistem pembuangan lumpur otomatis (sistem pembersih tangki) Konfigurasi ini memungkinkan Anda untuk langsung memulai produksi tanpa investasi tambahan. Mesin tersedia secara langsung.

Kondisi: baik (bekas), advert001 Lsdpoy Ez Rbefx Alkjrk

Kondisi: bekas, Complete packaging and inspection line with Transnova-RUF pick-and-place, Garvens, Safeline, Mengozzi For sale is a complete packaging and inspection line previously used in industrial operation. Main components: - Pick-and-place packer: Transnova-RUF including product infeed and carton handling - Checkweigher: Garvens - Metal detector: Safeline (Mettler Toledo) - Infeed/separation system: Mengozzi - Pusher/reject unit - Conveyor technology and line connections Description: The system was used for automated: - Product feeding and separation - Weight inspection - Metal detection - Rejection of faulty products - Pick-and-place packaging in cartons/trays Suitable for applications in the food or consumer goods industries. Condition: - Used complete line - System is decommissioned - Functionality not tested - Completeness not guaranteed - Sale as-is / as inspected Sales terms: - Sale preferably as a complete line - EXW (ex works), self-collection Ljdpfx Aoy Exbdjlksrk - Company sale – without warranty, guarantee, or returns

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 15 kg, Mesin pemotongan waterjet yang sepenuhnya berfungsi (tahun pembuatan sekitar 2001) dengan robot enam sumbu KUKA KR15. Mesin ini bekerja dengan metode pemotongan waterjet murni (tanpa bahan abrasif) dan saat ini masih digunakan untuk memproses bagian plastik. Pemrograman offline, demonstrasi memungkinkan. Termasuk pompa KMT Streamline (15 HP). Sistem lengkap dengan pembukaan dan penutupan pintu otomatis. Jika berminat, silakan hubungi! Ledeyl Niqspfx Alkerk

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 12.900 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20170777, akurasi pengulangan: 0,03 mm, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 200 mm, akurasi pemposisian: 0,06 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, tekanan kerja: 4.000 batang, daya motor servo: 37.000 W, panjang pemakanan sumbu X: 4.000 mm, panjang umpan sumbu Y: 2.000 mm, panjang umpan sumbu Z: 200 mm, tinggi total: 3.500 mm, panjang total: 6.200 mm, lebar total: 3.200 mm, tekanan air: 4.000 batang, tinggi kabinet kontrol: 1.950 mm, sambungan udara terkompresi: 7 batang, tekanan pompa: 4.000 batang, lebar kabinet kontrol: 800 mm, berat keseluruhan: 7.500 kg, tinggi produk (maks.): 200 mm, frekuensi input: 50 Hz, daya: 37 kW (50,31 hp), Perlengkapan: penghadang cahaya keselamatan, Mesin pemotong jet air Perndorfer tipe WSS4020, ukuran meja 4000/2000 mm, pompa tekanan tinggi BFT Ecotron dengan daya 37 kW dan tekanan pemotongan 4000 bar, kepala pemotong 3D untuk pemotongan kontur. Mesin ini bekas namun dalam kondisi baik, dan baru-baru ini telah dilakukan overhaul oleh produsen. Mesin dapat dilihat dan diuji kapan saja. Lrsdpfx Aex H Ny Tjlkek

Tahun pembuatan: 2012, Kondisi: bekas, Ratiostretch RS10/2 RA1978 Mast height: 2,540 mm Width: 1,650 mm Turntable diameter: 1,650 mm Length: 2,600 mm Max. pallet weight: 2,000 kg Max. pallet height: 2,330 mm Max. pallet dimensions: 1,100 x 1,200 mm Turntable speed: up to 12 rpm (max.) / 3 rpm (min.) Carriage speed: up to 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230 V, 50 Hz, 6 A Year of manufacture: 2012 Weight: 450 kg Film width: 450–500 mm Film roll diameter: 240 mm Roll weight: up to 20 kg Film thickness: from 7 µm Currently installed: recessed into the floor; optional drive-on ramp available Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Lredpfxok Abplo Alksk Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2010, drehtellerbelastung-2000-mm Lodsy Aa Sfopfx Alkerk

Kondisi: bekas, Fungsionalitas: belum diuji, Our company is offering an automatic packaging or feeding machine from Mengozzi (Mingozzi Packaging Team) from company inventory for sale. The machine is part of an industrial packaging line and features an indexing rotary table with mechanical feeding and positioning units. It is typically suited for separating, feeding, and positioning products for downstream packaging processes (e.g., trays, blister packs, or cartons). Features / Equipment: - Rotary / indexing table machine Lredey Enlxspfx Alkek - Mechanical gripper and guiding units - Product feed via hopper - Enclosed safety housing - Industrial-grade construction Condition: - Used equipment - System has been out of operation for an extended period - Functionality not tested - Completeness cannot be guaranteed - Sale as-is / as inspected Note: Due to the specific design, the machine is particularly suitable for specialist companies for refurbishment, adaptation, or parts harvesting. Terms of sale: Company sale – without warranty, guarantee, or return Delivery EXW (ex works), collection by buyer

Kondisi: bekas, BENHIL 8380 Mesin Pengisi dan Pengemas Mentega untuk 250 g format saat ini | SIAP STOK Benhil 8380 Mesin pengisi dan pengemas mentega Kapasitas hingga 80 paket/menit (4.800 paket/jam) Ukuran paket: 250 gram Dimensi: 100 mm x 75 mm x 35 mm Produk: mentega, margarin, dll. Bahan kemasan: aluminium foil atau kertas perkamen dalam rol. Bobot: 2.000 kg (bruto) Dimensi sekitar 200 x 150 x 200 cm (P x L x T) Daya listrik: 2,2 kW Kondisi 'apa adanya' Kondisi baik (lengkap) Harga setelah renovasi total: Silakan ajukan permintaan Lrsdpfxsyc T Dyo Alkek

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, WJS Waterjet T-Model Advanced Sistem mesin: T-Model NCT 30 Flying Bridge, meja pemotong 3 x 2 m Pompa tekanan tinggi: BFT Ecotron 4037, 50HP / 4000 BAR Alat pemotong: Kepala pemotong dasar WJS Sistem pembuangan media abrasif: WJS Standard Lrodpfsy Epb Nox Alkjk

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, The MECA S4000 tray sealer is an automatic packaging machine designed to ensure airtight sealing of trays. Thanks to its high-performance sealing system, it effectively protects food products from air, humidity, and contaminants, while extending their shelf life. In fact, this machine helps preserve the freshness and quality of foods, making it an ideal choice for companies seeking to improve their packaging process. Furthermore, the MECA S4000 tray sealer is engineered for seamless integration into various production lines. Its versatility and quick tool change system allow it to accommodate multiple tray formats, thus optimizing productivity. Additionally, its ergonomic design and user-friendly operation make it accessible to all operators, even those with limited experience. With easy maintenance and thorough cleanability, the machine upholds high hygiene standards. In summary, the MECA S4000 is a robust and efficient solution for businesses looking to enhance their packaging operations while ensuring optimal product preservation. Technical specifications: Lrsdpfx Alsu Nv Nrekok Manufacturer: MECAPLASTIC Model: S4000 Year of manufacture: 2010 Output (cycles/min): up to 6 Automatic Used machine. Highlights: - Tray sealing machine, user-friendly - Quick tool change - Ergonomic operation - Fully cleanable