Beli Stiefelmayer C 100 bekas (68.785)

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test chamber allows you to test the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective transmission to the specimen. The air handling unit is located at the rear of the interior. The system’s operating units are installed in a separate frame behind the device for easy accessibility. The control unit is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and heat load, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Hedpfox Eaxbjx Aansnl Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10 % to 95 % relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time Technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without heat load, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 litres (5.5 m³) - Internal approx.: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External approx.: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: Inspection by appointment possible (46325 Borken) Shipping by freight forwarding possible – costs & arrangements on request Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Hnedpsx D Abpjfx Aansl Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: bekas, mytron Model: T2240 Temperature Chamber, Water-cooled Hsdpfx Aasvtl Hqsnjnl Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Feedthrough ports for cables: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature temporal temperature stability: +/- 0.5 °K spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, inlet and outlet 1" female thread Cooling water shutoff by solenoid valve when unit is OFF Fault indication for chiller malfunction Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (approx. 27 °C in continuous cooling) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuses: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 Watts each on left and right sides of chamber Exhaust connection: DN 100 mm push-fit system Safety devices: electronic overtemperature protection (fixed setting) Smoke detection with audible alarm Viewing window: five-pane glazing, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) Further questions can be answered for you by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Hsdpjvb Hanefx Aanonl Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: Hodpfx Aajvb E Uqenjnl 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: baru, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram surface: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil capacity: 200Control / key switch: 1. Set-up mode: Manual without light sensor (max. 10mm/sec. speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs. Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110 mm/sec – Retract 200 mm/sec – Pressure: 9 mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design possible) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator's console Safety PLC – SICK Light sensors SICK 700 + 150mm Linear measuring scale for setting stroke length 9” PLC screen – Siemens (German & English) Hodpfxsm Nntye Aanonl Movable two-hand operation Ethernet connection for remote maintenance Alarm indicator for malfunctions (light & sound) Dual work area lighting 8 free I/O on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, This process plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository masses, etc. with a working volume of 100 liters. The total volume with the vessel closed is 123 liters, and the minimum fill volume is 35 liters. Hsdpsyx Sxcsfx Aansnl The plant consists of a completely enclosed stainless steel vessel with an electric/water heating and cooling double jacket, and a vessel lid fitted with integrated mixing units and drives. The mixing vessel is mounted on three castors for mobility and can be pulled out for filling or cleaning. The lid is mounted on a lifting column for hydraulic raising and lowering to facilitate cleaning and emptying. It is equipped with an observation window and two filling ports with valves, which can also be used to add other product components. In addition, there is an adjustment device for setting the grinding gap of the toothed colloid mill. Technical specification: Vessel: Permitted operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Hydraulic PLC Press 100 ton (1.000 kN) daya tekan Seri Siemens PLC1200 Layar Beijer 10" Stroke 400 mm Meja kerja 790 mm x 600 mm Kecepatan maju 110 mm Hnsdpfxonp Ndhe Aanel Kecepatan mundur 140 mm Tirai cahaya Sick Modul perawatan jarak jauh terpasang Hidrolik Rexroth dengan pendingin Tersedia mulai minggu ke-46 di area pameran Stuttgart Perubahan dapat dilakukan sesuai permintaan

Kondisi: baru, Pressure: 100Motor: 11Installation height: 500Stroke length (max.): 400Ram adjustment: 790 x 600Table height: Floor to top edge of table – 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmApproximate weight: 5,500 kgOil filling: 200 lType: Hydraulic C-frame pressCapacity: 100 tons at 230 bar Controls / Key switch modes: - Set-up mode – Manual, without light curtain - Automatic mode – Full speed with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 pcs, Ø 50 x 30 mm - Auxiliary guides: 2 pcs, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 l/min, Helical gear pump Speeds: - Advance: 110 mm/sec - Return: 200 mm/sec - Pressure phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke length: 400 mm - Ram plate: 790 x 600 mm (with T-slots) - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (from floor to top edge of table) Hydraulic accessories: - Hydraulic control block & components from REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Speed adjustable via PLC - Air cooler - Pre-fill valve - Pressure holding valve Control accessories: - Siemens S7-1200 control system - Main control cabinet - Safety PLC from SICK - Light curtains from SICK (700 mm) - Linear scale for stroke adjustment - 10" touchscreen from BEIJER (German & English) - Movable two-hand control - Ethernet connection for remote maintenance - Fault indicator with visual and audible signal - Dual work area lighting - Side safety doors (outward opening) - Hydraulic proportional valves - Dual-channel safety control - Operating manual & parts list (German) - Complies with current machinery directive EN 693 Oil quantity: 220 litres (tank volume: 250 litres) Total weight: approx. 5,500 kg Hodewrkctopfx Aanjnl Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 Light Grey & RAL 7016 Anthracite Grey

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, kapasitas baterai: 575 Ah, kapasitas baterai yang tersisa: 100 persen, tegangan baterai: 24 V, panjang total: 827 mm, lebar total: 325 mm, tinggi total: 630 mm, berat keseluruhan: 445 kg, Baterai forklift 24V 5PzS575, 100% TERUJI Tahun pembuatan: 2021 Berat sekitar 435 kg Dimensi: 825 mm x 325 mm x 630 mm Baterai telah dirawat dan diuji oleh perusahaan spesialis. Uji kapasitas (tes pembongkaran C5) 659/575 Ah baterai Sisa kapasitas: 100% Hnjdpfeyu I D Sex Aansl Dengan sistem pengisian Aquamatik (BFS) Dengan baut terminal, namun TANPA jalur akhir

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, produsen baterai: Stuba, model baterai: 80v 5PzS775, kapasitas baterai: 775 Ah, kapasitas baterai yang tersisa: 100 persen, tegangan baterai: 80 V, berat baterai: 1.863 kg, tinggi total: 785 mm, panjang total: 1.028 mm, lebar total: 850 mm, Baterai forklift 80V 5PzS775 100% TERUJI Tahun pembuatan: 2024 Tanggal inspeksi: 2025 Dimensi (p x l x t): 1028mm x 850mm x 785mm Berat: 1870kg Baterai dirawat dan diuji oleh perusahaan spesialis. Hnsdpfx Aeyu Iw Sjanjl Tes kapasitas (uji pengosongan C5): 802/775 Ah baterai Kapasitas tersisa: +100% persen Dengan sistem pengisian Aquamatik (BFS) Dengan baut terminal namun TANPA saluran akhir

Kondisi: bekas, Tahun pembuatan: 2002, jam operasional: 121.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 500 kN, diameter sekrup: 20 mm, For sale is an injection moulding machine by Arburg, model 320 C 500-100. Hnodpfx Ajwqnhweanjl The machine is in good condition and fully functional after installation. Technical data: Year of manufacture: 2002 Pump hours: 121,000 h Clamping force: 500 kN Ejector force: 35 kN Tie bar distance: 550 mm Clear tie bar spacing: 320x320 mm Platen dimensions: 446x446 mm Screw diameter: 20 mm Calculated shot volume: 31 cm³ Transport and loading can be organised at extra cost upon request, Europe-wide. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), de-01 Hodpfjyt N Ayex Aanenl

Kondisi: baru, Tahun pembuatan: 2022, gaya penekanan: 100 t, Hydraulic C-Frame Press – Manufacturer: Hidrobrasil – 100 t – Table Ø 1050 mm For sale is a high-performance hydraulic C-frame press manufactured by Hidrobrasil, featuring a pressing force of 100 t. Designed for industrial applications, this machine offers optimal conditions for demanding forming, assembly, and production processes due to its high operating speed and robust construction. ==== Technical Specifications + Information: Hydraulic C-Frame Press – 100 t ==== General Information - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame construction - Pressing force: 100 t - Machine weight: approx. 3,500 kg - Dimensions (W × D × H): approx. 1,354 × 2,005 × 2,595 mm ==== Working Area - Daylight opening: 350 mm - Stroke: 300 mm ==== Table & Ram - Table diameter: Ø 1,050 mm ==== Speeds - Approach speed: 250 mm/s - Pressing speed: 3 – 15 mm/s - Return speed: 150 mm/s ==== Hydraulics - Number of cylinders: 2 - Cylinder diameter: Ø 250.97 mm - Piston diameter: Ø 41.76 mm - Max. operating pressure: 210 bar - Return force: 10 t - Additional ejector force: 5 t - Additional stroke: 150 mm ==== Hydraulic Power Unit - Pump capacity: 44.5 l/min - Pump displacement: 27.59 cm³/rev - Motor power: 14.24 kW - Motor speed: 1,500 rpm - Oil tank capacity: 350 l ===== Hnodpfxehmi T Uj Aanjl Assembly work, metal forming, serial production, heavy-duty applications, toolmaking, industrial press operations C-Frame Press, Hydraulic Press, Industrial Press, Production Press, Heavy-Duty Press, Tryout Press, Tool Try-Out Press Are you looking for a hydraulic press tailored to your application requirements? Contact us for an individual offer. Our hydraulic presses are manufactured in compliance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they comply in every respect with the Brazilian national safety directive NR 12, which builds upon these. Our core expertise lies in special-purpose machine engineering and press automation. We supply custom-designed hydraulic presses at surprisingly affordable prices. We use primarily components from leading European manufacturers for our hydraulic assemblies.

Kondisi: baru, Tahun pembuatan: 2023, Nominal pressing force: 1,000 kN Ram stroke, adjustable in steps: 16...140 mm Ram adjustment: 90 mm Throat depth: 295 mm Hodpfxedulidj Aanjnl Stroke rate at idle: 70 / min Tool installation height at maximum stroke (bottom) and adjustment (top): 420 mm* Table clamping area (W x D): 1,050 x 660 mm Ram clamping area (W x D): 640 x 460 mm Pin bore in ram: 65 H7 mm Main motor power: 7.5 kW Machine height approx.: 3,085 mm Machine weight: 8,500 kg With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest accident prevention regulations (UVV compliant)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, Unit brosur Horizon VAC 100 A+C, stasiun penjilidan & pelipatan SPF 20A, pemangkas FC 20A, jogger PJ 77R Hjdpfx Aajyl Aiwjnonl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The LCT bio.x C100 brush washing table is the proven classic with a new design and optimized device technology. It impresses with its exceptional stability and load-bearing capacity. The spacious work surface allows for barrier-free and comfortable operation. - Robust construction - Especially low maintenance - High load capacity - Energy-saving mode for idle periods such as nighttime or weekends - A flexible articulated hose enables easy rinsing of parts Hjdpfxeh S Undo Aanonl - Optimal cleaning performance by heating the cleaning fluid to 41 °C Workpieces are rinsed via a nozzle. The flexible articulated hose allows the nozzle to be fixed in the desired position. The cleaning brush assists in cleaning heavily soiled parts. The large cleaning surface allows for efficient work. The high load capacity of the washing table is ensured by its sturdy device construction. The unit is made of plastic, making it very stable and corrosion-free. Easy transport with pallet trucks. Multi-stage filtration system consisting of a coarse sieve, fine sieve, and magnet. Additionally, a washable filter bag (fineness: 100 μm) retains even the finest contaminants before they enter the bath. A functional control unit with a soft-touch control panel provides about 50% energy savings when the energy-saving mode is selected. All electronic components are combined in a compact technical unit. Our LCT bio.x C100 can be operated with the following label-free cleaning agents: LCT Bio Liquid LCT Bio Liquid Spezial LCT Bio Liquid Power LCT Coconut Cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner Low-Foam

Kondisi: bekas, Lens, lenses - Quantity: 6 lenses - Packaging: individually packed - Dimensions: 110 x 110 x H35 mm Hsdpfsb Nfc Ssx Aanonl - Price: for all 6 pieces - Sold only as a complete set - Weight: 0.3 kg per piece

Kondisi: bekas, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display Hsdpfx Aepcmt Tsanjnl -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz -Quantity: 2 displays available -Price: per unit -Dimensions: 125/100/H50 mm -Weight: 0.4 kg/unit.

Kondisi: baik (bekas), Flat gear motor, geared motor, electric motor, electro-geared motor, flat geared motor, flat gear motor -Manufacturer: KEB, flat geared motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 Hjdpfxot Hy Ths Aansnl -Speed: 50 rpm -Motor: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm -Protection class: IP56 -Dimensions: 445/230/H360 mm -Weight: 60 kg

Kondisi: baru, Pressure 100 t Stroke 380 mm Table working width 1100 mm Pressure 258 bar Oil capacity 46 dm³ Approach speed 7.54 mm/sec Working speed 2.47 mm/sec Return speed 9.06 mm/sec Total power requirement 2.2 kW Hnodpfx Aaoi A S I Ssnjl Machine weight approx. 970 kg Internal diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Piston base diameter [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Hydraulic unit with two speeds - Height-adjustable work table - Joystick for controlling piston movement up/down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Additionally, it features pressure regulation, two speeds, a joystick, and a hand pump for precision pressing.

Kondisi: baru, Cutting capacity at 90 degrees: round 100 mm Cutting capacity at 45 degrees: round 65.0 mm Cutting capacity at 90 degrees: flat 100 x 150 mm Cutting capacity at 45 degrees: flat 60 x 100 mm Saw blade dimensions: 1470 x 13.0 x 0.65 mm Voltage: 230 V Saw blade speed: 45.0 m/min Weight: 26.0 kg Dimensions (L x W x H): 700 x 320 x 420 mm The mobile bandsaw EBS 100 C is the ideal machine for assembly jobs on construction sites. Its smooth and vibration-free operation ensures precise cuts. SOLVES NUMEROUS CUTTING CHALLENGES ON THE CONSTRUCTION SITE Hjdpfx Aoxaa Apoanjnl Dry cutting (no coolant required) - Optimal price-performance ratio thanks to versatile application possibilities - Includes workpiece stop for efficient operation - Adjustable saw bow for mitre cuts up to 45° - Ideal for construction site use due to its low weight - Supplied as standard with integrated chip collection tray - Optimum cutting results due to ball-bearing saw blade guide - Quick-release vice included in the scope of delivery Scope of delivery - Saw blade - Workpiece stop - Quick-release vice - Ergonomic handle - Chip collection tray

Kondisi: baik (bekas), Tahun pembuatan: 1994, Ref. No.: 17540 Manufacturer: ARBURG Model: 270 C 500-100 (RUNHOUR Only 100) Year of manufacture: 1994 Clamping unit Clamping force: 50 tons Opening stroke: 350 mm Tie bar distance (H x V): 270 x 270 mm Minimum installation height: 200 mm Platen size (H x V): 405 x 405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight (PS): 61 g Injection pressure: 2,500 bar Dimensions and weight Hodpsyiz U Tefx Aanjnl Dimensions (L x W x H): 3.3 x 1.5 x 2.0 m Machine weight: 2,400 kg

Kondisi: baik (bekas), 2-post column punching tool, cutting tool, punching tool, punch press, die, punch, pillar set -Manufacturer: Fibro punching tool pillar set -Type: 201.31.056. Din 9822 C 100 x 80 -Punch: see photos -Dimensions: 340/160/H235 mm Hodpfsivql Sex Aanjnl -Weight: 23 kg

Kondisi: baik (bekas), Tahun pembuatan: 2000, Arburg 270 C 400-100 (2000) Gaya penjepit: 40 t Hnedsxqfi Aopfx Aanol Diameter sekrup: 20 mm Jarak antar tiang: 270 x 269 mm Berat: 25 g Tipe: horizontal Penggerak: hidrolik Jam operasi: 138000 jam