Beli Walter Mit Wendeschneidplatten bekas (10.429)

Kondisi: baik (bekas), Execution: • Clamping surface diameter: 400 mm • Overall height: 196 mm Ledpfxsy Hdnfj Anuehg • 3-jaw chuck, manufacturer: TOS, diameter: 250 mm, in very good condition

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. Lsdpfx Aeh R Taqenuohg We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: Lsdpfxemhhy Ne Anuohg - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya05, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally Lhodeykuh Nopfx Anuog TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Lsdsyktv Sepfx Anuohg Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2021, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S21MythoEasyLow04, Demo machine - like new. MYTHO EASY Low Very low-profile system in height Wrapping height: 2400 mm Turntable diameter: 1650 mm LP flat turntable: 30 mm flat, 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double-rope formation - see pictures. Lhedpfxjx Ta Nxj Anujg Automatic cutting Optional: film clamp on the turntable German Schuko plug 6 individually programmable programs Additional demo units immediately available from stock. Prices ex stock Ludwigsburg

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) Ledpsykud Rofx Anushg ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S Lodjyktrtspfx Anujhg with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Lsdpfxjykub As Anushg Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Kondisi: sangat baik (bekas), Viessmann Vitoplex/105kw boiler suhu rendah dengan pembakar minyak Lhedpfjwauaxsx Anueg

Kondisi: hampir baru (bekas), pendaftaran pertama: 12/2023, Tahun pembuatan: 2023, jam operasional: 160 h, Pending... Ljdpox Tn Upjfx Anushg

Tahun pembuatan: 1963, Kondisi: siap digunakan (bekas), max-umformkraft-80t Lhedpfx Asy A Smbenueg

Kondisi: bekas, We offer used lockers for sale here. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: light grey Condition: used PRICE €70.00 net €83.30 gross incl. VAT BULK PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We would be happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available at additional cost. The extra fees depend on the destination and shipment size, and can be quoted individually upon request. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. Ledpfsy Eqc Dox Anushg PAYMENT TERMS Payment terms will be agreed upon when the order is placed. The price is to be understood as a per unit net price unless otherwise stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, and machinery for trade, industry, and crafts. We continuously offer interesting second-hand products from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four wins – the success components of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, Tahun pembuatan: 2026, Recirculation chamber furnace, electric, new unit, delivery time 16 weeks -Temperature: 300°C -Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm -Capacity: 8,820 liters -Eurotherm Nanodac control system: Controller/recorder with color touch display -2 pcs recirculation fans -Double doors with safety door sensors -Overtemperature protection, Eurotherm 3216i -2 pcs fresh air fans -Automatic dampers -Electrical version, 400 V / 50 Hz / 3NPE -Increased heating power approx. 70 kW -Temperature accuracy: +/- 6 K in the empty oven -Documentation, CE Declaration of Conformity Lhsdpfev Hg Eujx Anujg -Electrical schematic with spare parts list Note: The oven floor is not insulated but only covered with stainless steel plate. This allows free entry with all track gauges. Alternatively, the floor can also be offered insulated (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and accessorize according to customer requirements. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat chamber, recirculation oven, chamber furnace, heating furnace, chamber recirculation furnace, tempering oven.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Direkondisi ulang, barang stok, garansi 12 bulan, BUKAN oven pelarut! -suhu maks 250 °C -volume total uap 20,5 m³ -ukuran efektif (P x L x T) 2300 x 2750 x 2200 mm -kontrol: Jumo Imago 500 -daya pemanas 36 kW -maks. beban troli oven 6000 kg, penggerak listrik -katup masuk dan buang listrik Belimo -kipas buang dikendalikan melalui inverter frekuensi -dimensi pemasangan (P x L x T) 3000 x 3000 x 3125 mm, dengan rel di depan oven -berat sendiri kira-kira 3500 kg -lemari kendali berdiri bebas -dokumentasi Ljdpfettbf Uox Anushg -diuji kelistrikan & dilengkapi protokol pengukuran DGUV terbaru Inspeksi dapat dilakukan di gudang kami dengan janji temu. Oven troli, oven, oven industri, oven sirkulasi, oven sirkulasi ruang, oven penstabilan, oven pemanas, oven pengering, oven temper, oven ruang, lemari pengering, oven pengerasan,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 8.100 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2066-5172, Perlengkapan: dokumentasi / manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – Year of Manufacture 2016 For sale: a 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. This machine is designed for precise machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, has been regularly serviced, and is maintained in very good technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATION Travel (axes): X = 330 mm Y = 213 mm Z = 475 mm Axis feed rates X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Lhodpfxeyz Dwcj Anueg Maximum workpiece length (peripheral grinding): 255 mm Maximum workpiece length (face grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air requirement: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT & FEATURES Automatic loading arm The machine is equipped with an automatic tool feed system. The arm picks tools from the input tray, transfers them for processing, and deposits the finished tools onto the output tray. This enables fully automated, uninterrupted production without continuous operator supervision. Dual grinding wheel mounting Simultaneous mounting of two grinding wheels increases work flexibility, reduces setup times, and allows execution of more complex operations without frequent tool changes. Electrical cabinet cooling HAOSCH cooling unit included in the set. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements, facilitating tool setup prior to machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production conditions Fully enclosed work area ensures safety and noise reduction Regularly serviced.

Kondisi: bekas, 2947 Lhedpsyqv Rfjfx Anusg

Kondisi: siap digunakan (bekas), Ukuran meja: 130 x 265 mm Tinggi meja: 180 mm Lhjdpfx Ansyv D Droueg

Kondisi: siap digunakan (bekas), Diameter meja: 250 mm Lhodpfx Aneyv D Aheueg Tinggi meja: 105 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 15.020 km, daya: 134 kW (182,19 hp), pendaftaran pertama: 07/1993, jenis bahan bakar: diesel, berat kosong: 7.520 kg, konfigurasi gandar: 4x4, jarak roda: 3.800 mm, inspeksi berikutnya (TÜV): 07/2026, bahan bakar: diesel, tipe perpindahan gigi: mekanis, suspensi: baja, Tahun pembuatan: 1993,

Kondisi: baik (bekas), Sekitar 60 dudukan alat ukuran ini. 40€/unit Penjualan hanya dalam negara anggota Uni Eropa! Tidak dijual ke perorangan. Segala bentuk klaim garansi dikecualikan. Kami tidak bertanggung jawab atas kebenaran data teknis dan tahun pembuatan, lengkapnya aksesori dan perlengkapan alat, serta kepatuhan terhadap semua persyaratan keselamatan dan perlindungan lingkungan yang tercantum dalam peraturan pencegahan kecelakaan. Ledpfxsyzduns Anushg

Kondisi: bekas, Sekitar 80 holder alat ukuran ini. €30/buah Penjualan hanya untuk negara anggota Uni Eropa! Ledpfxsyzdn Uo Anujhg Tidak dijual kepada perorangan. Segala bentuk garansi dikecualikan. Kami tidak bertanggung jawab atas keakuratan data teknis dan tahun pembuatan, kelengkapan aksesori dan peralatan alat, serta kepatuhan terhadap semua persyaratan keselamatan dan lingkungan yang disebutkan dalam peraturan pencegahan kecelakaan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1974, schleifdurchmesser-max-265mm-schleiflaenge-500mm-beschreibung-fo lgt Ledoytg U Hjpfx Anuohg

Kondisi: baik (bekas), 1x Arburg 320C 500-170 dengan Multilift, pagar pengaman, dan konveyor penyimpanan. Dijual tanpa konveyor Z, alat tempering, dan hisap Koch. Mesin dapat tersedia dalam waktu singkat sesuai kesepakatan. Lodpjyym Saofx Anuohg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 85-70, Magnet Overband Self-cleaning dengan Rangka Ledpfx Anex Tid Eeujhg Cocok untuk lebar konveyor 1200 mm. Panjang kerja 1470 mm x lebar kerja 645 mm.