Beli Ufkes Shark 4W bekas (294)

Kondisi: baru, Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 - 100 m/min Vise opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Gjdpfx Ajyv Nyloazouf Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electrohydraulic fully automatic bandsaw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing programming of up to 1000 different cutting programs with varying cut lengths and quantities for identical material dimensions. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button) - Manual or semi-automatic dynamic cycle allows cuts to be made directly, without programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for technical parameters such as: - Saw blade speed - Number of programmed and performed cuts - Blade thickness - Feed length - Cutting time - Ammeter - Blade tension - Indication of approx. 100 diagnostics and warning messages, all in the operator’s language - Display and recording of alarms and error messages, with the ability to review occurred incidents - Automatic parameter adjustment via control system when a new drive or inverter is installed - Electronic inverter for continuous adjustment of the blade speed from 15 to 100 m/min - Next-generation hydraulic control unit—high performance with low energy consumption - New 600 mm material feeding system using stepper motor and ball screw mounted on opposed bearings - Programmable stroke range for the saw arm directly from the control panel to adjust to the cutting material - Electronic blade tension control - Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder - Coolant tray (equipped with 2 electric pumps for lubrication and cooling of the saw blade) integrated into the machine base - Chip drawer (can be replaced by a chip conveyor—see special accessories) - Prepared for installing a minimum-quantity lubrication system for the saw blade (optional), in addition to the standard emulsion oil lubrication system - Chip removal brush - Machine designed for transport by pallet truck - Bi-metal bandsaw blade suitable for solid and profile materials.

Kondisi: baru, SHARK282CCS-HU-20240611 Gsdpfx Aeyv Nptjazsuf

Kondisi: baru, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90 degrees: square 320 mm Cutting capacity at 90 degrees: round 330 mm Gedoyv Nkkjpfx Aazeuf Cutting capacity at 90 degrees: flat 510x320 mm Cutting capacity at 45 degrees left: round 320 mm Cutting capacity at 45 degrees left: square 320 mm Cutting capacity at 45 degrees left: flat 350x320 mm Cutting capacity at 60 degrees left: round 230 mm Cutting capacity at 60 degrees left: square 230 mm Cutting capacity at 60 degrees left: flat 230x310 mm Cutting capacity at 45 degrees right: round 320 mm Cutting capacity at 45 degrees right: square 320 mm Cutting capacity at 45 degrees right: flat 380x320 mm Cutting capacity at 60 degrees right: round 250 mm Cutting capacity at 60 degrees right: square 250 mm Cutting capacity at 60 degrees right: flat 250x320 mm Total power requirement: 4 kW Weight: 1190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control system for mitre cuts from 0° to 60° left. The MEP 30 represents the latest generation of control systems. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor stops - Saw head raises – vice opens Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with latest-generation micro-controller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor current draw, saw head position, bandsaw speed, band tension)

Kondisi: baru, de-hu-it-lt-001 Guedoyv Nfuspfx Aazef

Kondisi: baru, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 350 mm Saw blade dimensions: 4640 x 34 x 1.1 mm Vise opening: 355 mm Saw band speed: 15–115 m/min Machine weight approx. 2,800 kg Guodpfx Asyv Nd Rsazof Space requirement approx. 3050 x 2190 x 2200 mm Shark 350 NC HS 5.0, fully automatic hydraulic band saw with double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Driven chip conveyor, installable on the right or left side of the machine + Adjustable clamping pressure for vises + Feeder with vertical rollers for lateral material support - Numerically controlled band saw, can also be operated in semi-automatic mode, featuring the latest MEP 50 control, developed by MEP specifically for automatic machines, based on Windows “CE” operating system - “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring at the cut surface when the saw band lifts at the end of the cut - Fieldbus communication system with dual microprocessors and serial connection - User interface with 7” touchscreen display and mechanical keys for operating functions of the saw, ensuring reliable, simple, and intuitive operation as well as real-time control of all cutting parameters - Automatic detection of the cut starting position - CNC machine to store up to 100 cutting programs with different quantities and lengths; also possible to select up to 100 programs as a cutting sequence - Robust cast iron construction for vibration absorption and to guarantee stable cutting precision and long saw blade life - Hydraulic saw bow feed on linear guides with preloaded ball recirculation rails - Hydraulic control for opening/closing of forward and frontal vises - Infinitely variable saw band speed from 15 to 110 m/min via vector inverter - Material feed by stepper motor and ball screw spindle, mounted in opposing ball bearings, with 600 mm stroke (repeatable for cutting any length) - Max. remnant length 120 mm + cutting length (OPTIONAL: feeder jaws to minimize remnants to 25 mm + cutting length) - Cut progression monitoring (OPTIONAL) - Material feeder with self-aligning feeding vise for feeding even slightly bent material - Saw drive wheel clamped via conical clamping set, ensuring optimum fixation with simultaneous axial adjustment capability - Management software to monitor/evaluate/correct in real time: cutting force, cutting torque, saw band tension compared to programmed values - Adjustable saw blade guidance heads made of steel with combined roller and carbide guideways and control valves for conventional circulating lubrication - Preparation for installation of OPTIONAL minimum quantity lubrication system - Saw drive wheel adjustment for blade change directly from the operator console - Automatic adjustment of the front saw blade guide head to material size - Machine...

Kondisi: baru, 001 Gedoyv Naropfx Aazeuf

Kondisi: baru, 1 Godpfjyvvqkjx Aazjuf

Kondisi: baru, Length: 1500 mm 6 steel tube rollers, width: 185 mm Diameter: 20 mm Continuously adjustable height: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm Guedpfxsfxu Tks Aazof

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Bekas gergaji pita hidrolik otomatis untuk logam MEP SHARK 332 NC EVO Ukuran pisau: 3320x27x0,9 mm Sudut pemotongan: dari 45° hingga +60° Mode operasi: manual, semi-otomatis dinamis, semi-otomatis, otomatis Kecepatan pemotongan: 15-100 m/menit (inverter) Kapasitas pemotongan: pada 0° - bulat 300 mm - persegi 260 mm - persegi panjang 330x260 mm Dimensi: 2600x2320x2000 mm Tahun pembuatan: 2011 Berat: 1050 kg Mesin telah sepenuhnya direkondisi dan diuji. Gedsul Svlepfx Aazeuf

Kondisi: baru, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw blade length: 2950 x 27 x 0.9 mm Blade speed: 15 – 100 m/min Total power requirement: 2.2 kW Gusdpfx Ajfg E Hysazef Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant length of 60 mm. - Maximum cross-section: 230 x 230 mm - Numerically controlled band saws featuring the new Windows “CE” based CNC system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touch screen display and mechanical keys for the band saw’s operational functions, ensuring reliable performance, intuitive operation, and real-time monitoring of all cutting parameters. - Safety enclosure according to the latest safety regulations of Machinery Directive EN 13898/2007. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron frame (G25) to compensate for vibrations, enhance machine stability, and extend blade life.

Kondisi: baru, Cutting diameter 300 mm Saw band length 3320 x 27 x 0.9 mm Cutting width 300 mm Control NC Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: square 250 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: square 170 mm Band speed 15 - 100 m/min Total power requirement 2.2 kW Machine weight approx. 1.1 t Space requirements approx. 3.3 x 2.83 x 2.23 m Equipment: - Electrohydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic, and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows for direct cuts outside of series production, without programming - Numerically controlled bandsaw machines, featuring the new Windows CE-based controller developed by MEP specifically for automatic machines - User interface with 7" touch screen display and mechanical buttons for machine operating functions - Infinitely variable cutting speed adjustable from 15 to 100 m/min via frequency inverter - Material feed with stepper motor and ball screw - mounted on counter-opposed ball bearings; single stroke 600 mm - Repeatable for any length required - Automatic monitoring of cutting load - via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base Gusdpfx Ajfg E H Eoazsf - Swarf removal brush - Bi-metal saw blade for solid and profile materials - Tools and operating manual including spare parts list

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Gjdefg E H Ispfx Aazeuf Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 10.720 h, Fungsionalitas: berfungsi sepenuhnya, Willibald EP 5500 Shark dalam kondisi sangat baik dan siap digunakan. Gusdjy Iwgkopfx Aazsf

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption * Bandsaw tension * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). Gjdpfefg E H Uox Aazsuf - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Guodpfx Aajfg E Iaezef Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.)

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Gjdjfg E H Rjpfx Aazjuf Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Gedpfx Asfg E H Ssazeuf Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Gusdpfx Aaefg E H Tjzef Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Guedpfjxz Hhzox Aazsf Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, Model designation: Shark 282 CCS Gjdsgvkbcopfx Aazsuf

Kondisi: baru, Model designation Gujdegvkglopfx Aazsf Shark 281 SXI evo

Kondisi: baru, Model designation Shark 281 CCS Godogvkchspfx Aazouf

Kondisi: baru, Model designation SHARK 331-1 NC 5.0 SPIDER Gusdpfx Aol Sva Isazof

Kondisi: baru, Model designation Shark 332-1 SXI evo Gjdpfx Aaegvkafszouf

Kondisi: baru, Model designation Gjdpfogvquwsx Aazouf Shark 332-1 CCS