Beli Cts Laser Image Setter bekas (5.835)

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Tsdpfxjzizghe Ad Rea Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Tjdpfxszizdye Ad Rja Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS temperature test chamber We offer you a CTS temperature test chamber. Water-cooled Model series: T-40/600 Includes metal braces to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for your security as a buyer! The following checks are carried out on our listed chambers prior to sale: 1. Functional inspection and replacement of necessary components Tjdpfxsziyw Ss Ad Roa 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications reserved!) If you have further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer you a climate test chamber. Water-cooled Test chamber volume: 350 liters Internal dimensions: Height 750 mm x Width 650 mm x Depth 720 mm External dimensions: Height 1800 mm x Width 850 mm x Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.h. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.h. over time up to 90% r.h.; max. ±1 - 3% r.h. over time above 90% r.h. Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Tsdpfxoziyw Es Ad Rea Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Type: CS-70/350 Important information for you as a buyer: The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a test run monitored using calibrated instruments. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Hier we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test chamber volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm Todpfsziyphjx Ad Rja External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Power connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subject to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), en-01 Todpsziygyjfx Ad Rsa

Kondisi: sangat baik (bekas), CTS Climate Test Chamber T-70/600 Water Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for setpoint and actual temperature values - Easy adjustment via +/- buttons - Digital temperature input in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test specimen activation Insert Shelf: Stainless steel, support surface 820 x 710 mm Max. load per shelf: 35 kg Total load with maximum shelving: 100 kg Refrigeration Unit: Water-cooled, low-noise, fully hermetic with continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Tests: Temperature range: -70°C to +180°C Tjdpfxeziycbo Ad Rea Temperature deviation: ±0.1 to 10.3 K (time-based) Temperature change rate: According to DIN 50 011, Part 12, measured in the center of the test chamber - Heating: 2.5 K/min - Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Internal chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" internal thread Sound pressure level:

Kondisi: baru, jam operasional: 5 h, Fungsionalitas: berfungsi sepenuhnya, lebar kabinet kontrol: 800 mm, tinggi kabinet kontrol: 1.700 mm, tegangan masuk: 400 V, arus masuk: 16 A, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, Sistem Individual L25-2203 cleanCABINET CL 100G-BRP Sistem laser lengkap untuk integrasi sebagai komponen individual, terdiri dari modul-modul berikut: - Produk khusus, produksi laser daya rendah Sistem laser CL100G-BRP, laser yang dipompa dioda Panjang gelombang 1064nm, mode operasi berdenyut (ns) Daya laser rata-rata: P = 100 W +/-3% Persiapan untuk prototipe laser, tipe pemasangan 19" Setara dengan 2003836 Konfigurasi khusus, panjang serat 10m, pulsa yang diperpanjang - Sistem optik 2D, Stamp 10 untuk laser daya rendah (CL12BRP-CL100BRP) Optik 2D otomatis dengan koneksi untuk perlindungan refleksi balik (BRP) dan pemantulan 90°, area kerja maks: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Diameter fokus bergantung pada panjang fokus optik Komponen yang disertakan: Sistem optik 2D, Stamp10 Koneksi 90° Elektronik kontrol Kabel Lisensi cleanSTUDIO/cleanCONTROL untuk optik 2D (tanpa dukungan sistem sumbu) RTC - Lensa fokus f=254, kuarsa penuh, Kelas tinggi, area kerja sekitar 150mmx150mm Pergeseran fokus minimal - Pelindung kaca BG, STAMP 10/14 F420 Pelindung yang dapat diganti dengan cepat untuk pemasangan pada Stamp14 dengan pemantauan koneksi - Laser penyelar untuk laser daya rendah (LP) (CL12G-CL-500G) Laser penyelar memungkinkan pengendalian titik tumbukan sinar pada permukaan komponen. Pemasangan di dalam sumber sinar, kopling ke transmisi serat, panjang gelombang = 660nm, daya: P = 0,5 mW (min. 0,2mW, maks. 1,0 mW) - Enklosur sumber laser terpusat W/L Enklosur untuk menampung sumber sinar CL100 termasuk penukar panas udara-air 2kW, bandingkan dengan file CAD 3D. - Kabinet kontrol GS 1-1600 (CL12G-CL100G) Pembaruan: panjang kabel 32m Enklosur laser dalam konstruksi kabinet, tipe 1/1600 untuk sistem laser seri daya rendah (CL12G-CL100G) terdiri dari: kabinet dengan kunci ganda Rittal, lapisan bubuk struktural, RAL 7035S, opsional penyejuk Pemasangan pada roda tugas berat dengan rem, kapasitas beban 250kg, jalur serat/kabel melalui atap, suplai tegangan melalui Harting Han6, sisi kiri, sirkuit keselamatan "Tingkat Performa D", posisi pemasangan laser dan keluaran serat dapat diubah, tombol berhenti darurat, sakelar kunci untuk memulai dan sakelar utama di pintu depan, diuji DGUVV3 Dimensi: TxLxT: 1600x600x800mm membutuhkan visualisasi untuk pengoperasian dan penyesuaian daya pendingin sesuai dengan suhu lingkungan di lokasi pemasangan TANPA PENYEJUK karena hanya untuk penempatan HMI, PC, dan teknologi PL-D termasuk teknologi PLD Artikel PLD sebagai modul sisipan (lihat di bawah atau Tsdpfx Adozl Slyo Rsa alternatifnya kabel di dalam kabinet kontrol) - Enklosur BG 19" 2HE PLD Modul sisipan PLD untuk pematian yang aman dari sistem laser daya rendah, dipasang di enklosur 19" - 2HE untuk digunakan pada sistem laser - VS-OPT Ehtercat Tembaga (MP/HP 2D) Antarmuka Ethercat untuk sistem daya menengah dan tinggi (2D) Antarmuka fieldbus - 2D Antarmuka - Ethercat Tembaga - protokol cleanSTUDIO - IPC 19" 1HE - Panel sentuh standar 17 inci dengan HDMI+DP-VGA - Keyboard dengan trackball DE Keyboard QWERTZ dengan trackball (DE)

Kondisi: sangat baik (bekas), CTS Tjdpfxjzimgas Ad Rsa Model: CSR-60/810/S Air-cooled Temperature and Climate Conditioning Unit CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system manufactured by CTS GmbH, comprising a conditioning unit (type CSR-60/810/S) and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications—for example, automotive, electronics, component, or material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system by CTS GmbH, consisting of: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance/lifetime testing). Technical Data (per nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerant: - Pre-cooling stage: R452A (17.0 kg) - Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 | Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (WxDxH): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (WxDxH): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information: The following work is performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change. Errors excepted.) We are happy to answer further questions by phone.

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Tsdpfx Aeziizyod Rea 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone.

Kondisi: bekas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98% r.H. Test chamber internal dimensions (approx.): Height 870 mm / Width 1000 mm / Depth 1000 mm External dimensions (approx.): Height 1950 mm / Width 1200 mm / Depth 2220 mm Control cabinet (approx.): Height 2100 mm / Width 800 mm / Depth 400 mm Test chamber volume: 900 litres Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Todpfxoziiztj Ad Rja Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your security as a buyer, please note: The following points are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS climate test chamber type: C -40/600, air-cooled (retrofitted to use R-452A) Tsdpfjziizgox Ad Rsa Test chamber volume: 600 liters Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time in stabilized state - Average temperature change rate (without test specimen and without heat radiation): Heating: 2.5 K/min Cooling: 3.0 K/min - Max. heat radiation: 2500 W at +20°C Climate testing: - Climate range / Technical data: Temperature range: +10 °C to +95 °C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7 °C to +94 °C Dew point range II: –10 °C to +7 °C Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Test chamber dimensions (approx.): - Height: 850 mm - Width: 850 mm - Depth: 830 mm External dimensions (approx.): - Height: 1900 mm - Width: 1115 mm - Depth: 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Nominal current: 11.9 A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) We are happy to answer any further questions by phone.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Perangkat Pembersih Laser Impuls dengan daya laser 200 Watt Jauh lebih efektif pada aplikasi pembersihan/penghilangan karat dibandingkan laser kontinu seperti yang digunakan pada laser pengelasan. - Mesin pameran (bekas/sangat bagus), sekitar 70 jam operasional - Dapat langsung dilihat dan diuji di tempat kami - Perangkat top dengan harga terbaik dari stok pameran kami - Untuk pengelupasan cat, penghilangan karat, pembersihan sambungan las baja tahan karat, dll. - Impuls laser 200 Watt, pendingin udara - Menu berbahasa Jerman - Tersedia segera Perhatikan juga penawaran leasing/pembelian sewa kami yang terjangkau. Penjualan hanya untuk bisnis Ukuran mesin kira-kira: Lebar: 60 cm Tinggi: 120 cm Todpfxsuhcd Rj Ad Rja Kedalaman: 110 cm Berat: sekitar 100 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 80 h, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 355 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 20 W, jenis pendinginan: air, panjang gelombang laser: 355 nm, frekuensi input: 50 Hz, Perlengkapan: kabin, Mesin gravir laser UV dengan daya laser 20 Watt Sumber laser dengan panjang gelombang 355nm / 20 Watt Mesin demo (bekas/ sangat baik), dengan sekitar 80 jam operasi - Tidak ada tanda keausan yang terlihat - Include poros putar - Include sistem PC Windows 64-bit - Include layar 22" - Semua sudah terpasang dan diatur sepenuhnya - Perangkat lunak gravir dalam bahasa Jerman - Perangkat lunak 3D (MM3D) Tjdsflrnaepfx Ad Rea - Sangat mudah dioperasikan - Tinggal nyalakan dan mulai - Sumber laser UV 20 Watt untuk penandaan dengan kontras tinggi dan kecepatan tinggi, resolusi sangat tinggi - Mengukir pada hampir semua logam (baja tahan karat, kuningan, aluminium, dll.) - Mengukir pada hampir semua plastik (termasuk PVC, silikon, dll.) - Mengukir pada kaca asli (termasuk kaca kristal) - Memotong kaca asli juga dimungkinkan - Kualitas industri berat - Sistem lengkap / siap pakai - Area kerja sekitar 500 x 600 x 600mm (p x l x t) - Permukaan penjepit dengan ulir pemasangan setiap 50mm - Penerangan area kerja LED - Koneksi pipa 50mm untuk sistem ekstraksi asap - Area gravir sekitar 150x150 / 200x200 / 300x300 (dapat diatur) - Scanner 3D untuk penandaan permukaan dengan bentuk bebas - Include pedal kaki untuk memulai proses gravir Penjualan hanya untuk pelaku usaha. Pengiriman / konsultasi / penjualan hanya di Jerman / Austria / Swiss Silakan juga perhatikan penawaran leasing/sewa beli menarik dari kami. Dimensi mesin sekitar: Lebar: 800mm Tinggi: 1800mm Kedalaman: 1000mm Berat: sekitar 180kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 20 h, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.070 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, panjang gelombang laser: 1.070 nm, Perlengkapan: kabin, Mesin laser engraving dengan daya laser 30 Watt - Mesin pameran / unit demo bekas dengan sekitar 20 jam pemakaian - Layak untuk dilihat langsung - Termasuk PC Windows 11 64bit (termasuk monitor/keyboard/mouse) - Sudah terpasang dan terkalibrasi - Software gravir berbahasa Jerman - Sangat mudah dioperasikan - Tinggal nyalakan dan langsung digunakan - Sumber laser fiber 30 Watt untuk penandaan kontras tinggi dan cepat dengan resolusi sangat tinggi (lihat gambar) - Fungsi wobble, misalnya untuk membersihkan komponen logam - Kemampuan gravir dalam hingga 3mm - Untuk gravir pada berbagai logam (stainless steel, kuningan, aluminium, dll.) dan banyak jenis plastik - Kualitas industri berat - Sistem lengkap / siap pakai langsung - Area kerja sekitar 390 x 270 x 350mm (p x l x t) - Permukaan penjepitan dengan ulir pengikat pola 50mm - Pencahayaan LED untuk area kerja - Sambungan pipa 50mm untuk ekstraksi asap - Area gravir hingga 170 x 170mm - Penyesuaian fokus secara motorik - Termasuk pedal kaki untuk memulai proses gravir Silakan cek juga penawaran leasing/sewa beli kami yang menarik. Todpfod Ha I Sox Ad Roa Penjualan hanya untuk pelaku usaha. Pengiriman / konsultasi / penjualan hanya di Jerman / Austria / Swiss Ukuran mesin sekitar: Lebar: 450mm Tinggi: 800mm Kedalaman: 750mm Berat: sekitar 80kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.070 mm, daya laser: 60 W, jenis pendinginan: udara, masa garansi: 12 bulan, panjang gelombang laser: 1.070 nm, Perlengkapan: kabin, Mesin ukiran laser dengan daya laser 60 Watt (baru) - Laser MOPA 60 Watt (memungkinkan ukiran laser berwarna pada baja tahan karat) - Termasuk sumbu ke-4 (unit putar) - Termasuk sistem PC Windows 10 Pro 64-bit - Termasuk monitor 22 inci - Semua sudah terpasang dan disetel - Perangkat lunak pengukiran dalam bahasa Jerman - Sangat mudah digunakan - Cukup hidupkan dan mulai gunakan - Sumber laser serat dengan 60 Watt untuk penandaan dengan kontras tinggi dan cepat dengan resolusi yang sangat tinggi (lihat gambar) - Pengukiran mendalam hingga 4 mm dimungkinkan (termasuk pada baja yang dikeraskan) - Fungsi getaran, misalnya, untuk membersihkan komponen logam - Untuk mengukir pada banyak logam (baja tahan karat, kuningan, aluminium, dll.) dan banyak jenis plastik - Kualitas industri yang berat - Sistem lengkap / siap digunakan - Area kerja sekitar 500 x 600 x 600 mm (P x L x T) - Permukaan penjepit dengan ulir pengikat dengan jarak 50 mm Tedpofkgq Nsfx Ad Roa - Lampu area kerja LED - Sambungan pipa 50 mm untuk pembuangan asap - Area ukiran sekitar 180 x 180 mm - Dapat diperluas hingga sekitar 300 x 300 mm - Termasuk sakelar kaki untuk memulai proses pengukiran Harap perhatikan juga penawaran sewa/beli kami yang menarik. Penjualan hanya dilakukan kepada pelaku bisnis. Pengiriman / konsultasi / penjualan hanya di Jerman / Austria / Swiss Dimensi mesin sekitar: Lebar: 800 mm Tinggi: 1800 mm Kedalaman: 1000 mm Berat: sekitar 150 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0720, Tahun pembuatan: 2015, berat keseluruhan: 370 kg, daya laser: 200 W, jarak gerak sumbu Z: 570 mm, model sumber laser: LS-PEC 200, Baru-baru ini, perawatan ekstensif senilai 5.000 € telah dilakukan pada mesin oleh pabrikan. Lampu, cermin, dan pompa sirkuit pendingin telah diperbarui. Awalnya, mesin ini digunakan sebagai mesin pameran dari tahun 2015 hingga 2018. Mulai tahun 2020, mesin ini digunakan sekitar 50% dari kapasitasnya, dan mulai tahun 2023, hanya digunakan satu hari per minggu! Ideal untuk pembuatan perkakas, perbaikan, atau perbaikan komponen cor! RINCIAN TEKNIS Jenis laser: Nd: YAG Sumber laser: LS-PEC 200 Daya rata-rata maks.: 200 W Daya puncak pulsa: 9 kW Energi pulsa: maks. 100 J Durasi pulsa: 0,4–20 ms Frekuensi pulsa: 1–20 Hz (100 Hz) Diameter fokus: 0,2–2,0 mm Kecepatan pemosisian: 0,5–15 mm/s Rentang sumbu X: 700 mm Rentang sumbu Y: 400 mm Rentang sumbu Z: 570 mm RINCIAN MESIN Data koneksi listrik Tegangan listrik: 400 V Fase: 3 Frekuensi listrik: 50 Hz Dimensi & Berat Dimensi (P x L x T): 950 x 1.550 x 1.250 mm Berat: 370 kg Total pulsa: 56527413 PERALATAN Kontrol joystick Pencahayaan LED Perangkat putar untuk resonator untuk pengelasan bentuk besar Pasokan gas pelindung yang dikendalikan langsung melalui katup solenoid Roda tugas berat Resonator laser termasuk mekanisme resonator Batang laser Kavitas resonator Cermin resonator Penutup pengaman Catu daya termasuk sekering Sakelar pemutus daya Sakelar darurat Pemutus sirkuit motor Antarmuka dengan fungsi pemantauan perangkat keras Sakelar lampu Pengontrol industri Tedpfxezlqt Ne Ad Rsa Bank kapasitor

Kondisi: sangat baik (bekas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-cooled Includes metal struts to increase the floor load capacity Todpfx Adszh Htwo Rsa Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following points are carried out in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, daya laser: 12.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, ketebalan maksimum lembaran baja tahan karat: 25 mm, tebal plat aluminium (maks.): 25 mm, ketebalan lembaran kuningan (maks.): 5 mm, ketebalan pelat tembaga (maks.): 5 mm, Diameter pipa (maks.): 550 mm, Panjang pipa (maks.): 12.000 mm, panjang kerja: 12.000 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, ACME Tube and Profile Laser System – 3-Chuck System with 45° Laser Head The ACME Tube and Profile Laser System is a high-performance CNC fiber laser cutting machine designed for ultra-precise machining of tubes and profiles in a wide range of dimensions and applications. Technical Specifications and Features 3-Chuck System (all chucks movable) For maximum flexibility, precise material guidance, and virtually scrap-free processing (zero-tail-cutting). Vertical Guides Robust machine construction for high stability, precision, and vibration dampening—even with large workpieces. Processing diameters (optionally available): - Ø 280 mm - Ø 360 mm - Ø 550 mm Todozl Dgvepfx Ad Rsa Laser power: - 3 kW - 6 kW - 12 kW Maximum Processing Length: Up to 12,000 mm (12 meters) for long materials and industrial applications. 45° Laser Cutting Head Enables bevel cuts and complex cutting geometries without the need for secondary processing. Automation & Material Handling - Semi-automatic loading and unloading system: Efficient material feeding and removal to reduce setup times and manual intervention. - Integrated small parts conveyor: Clean separation and automatic discharge of finished parts and offcuts. Quality & Safety - Components from renowned international manufacturers - High-quality laser sources and cutting heads – Max Photonics and Boci - CE-compliant machine design according to EU machinery directives Key Advantages at a Glance - High precision for complex tube and profile geometries - Efficient production through semi-automated handling - Flexible configuration for various material diameters and laser powers - Reduced material waste thanks to optimized chuck technology

Kondisi: baik (bekas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test specimen control Technical Specifications Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2,500 W at +20°C Approx. 2,500 W at 0°C Approx. 1,800 W at -40°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1,900 mm, Width approx. 1,120 mm, Depth approx. 1,875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant Tjdpfjzh D E Rsx Ad Roa 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For additional questions, we are happy to assist you by phone.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.770 mm, lebar total: 600 mm, panjang total: 617 mm, tegangan masuk: 230 V, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Berkat sistem kartrid konstruksi tertutup, printer 3D ini sangat cocok untuk pembuatan prototipe, bidang kedokteran gigi, atau bahkan untuk tujuan pelatihan, karena tidak ada kontak dengan bubuk logam – baik dalam persiapan komponen maupun selama proses pencetakan itu sendiri. AL3D-METAL 200-100 Printer 3D Logam untuk manufaktur aditif Tjdpfxszlnh Ro Ad Roa TIPE LASER: Laser serat Panjang gelombang: 1070 nm Daya rata-rata: 200 W Mode operasi: CW Diameter fokus: 50 μm Kecepatan pemindaian: maks. 5 m/s Parameter proses: Kemampuan untuk secara komprehensif memengaruhi parameter proses TERMASUK 9 SET Kartrid Konstruksi: Volume konstruksi: r Ø 100 mm; z 60 mm Ketebalan lapisan: 10 - 50 μm Kepadatan komponen yang dapat dicapai: > 99% PERANGKAT LUNAK AL3D-OS Pengoperasian: melalui layar sentuh 15,6", keyboard, dan mouse Konektivitas: 1x Ethernet; 2x USB Format file impor CAD: STL Persiapan pencetakan: Pembuatan penyangga sederhana. Slicer terintegrasi dalam perangkat lunak.

Kondisi: bekas, Control boards for lamp-pumped lasers, marking lasers, control board, input board, controller - Manufacturer: SLS Spectron Laser Systems - Controller originates from a marking laser - Type: Handling Gretag Laser 6211 - Controller is sold from storage in untested condition, therefore as a spare parts donor - Dimensions: 482/400/H88 mm Tedpfx Asda Ny Hjd Rsa - Weight: 5 kg

Kondisi: bekas, Power supply unit for lamp-pumped lasers, marking lasers, control board, input board, control unit - Manufacturer: SLS Spectron Laser Systems - The control unit comes from a marking laser - Type: Handling Gretag Laser 6211 - The control unit is sold untested from storage, thus as a spare parts donor - Dimensions: 482/500/H266 mm - Weight: 54 kg Todpfx Adeda Nyye Rea

Kondisi: bekas, Power supply unit for lamp-pumped lasers, marking laser, control card, input card, controller - Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY - Controller originates from a marking laser Tedpfx Ajda Ny Asd Rsa - Type: Handling Gretag Laser 6211 - Controller is sold untested from stock, thus as a source for spare parts - Dimensions: 482/530/H220 mm - Weight: 15 kg

Kondisi: bekas, Screen keyboard, control boards for lamp-pumped lasers, marking laser, control card, input card, controller Tedpsda Ny Eefx Ad Rja -Manufacturer: HAAS LASER -The controller originates from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Q-switch driver: 68.11.40 -Controller is sold untested from stock, therefore as a source of spare parts -Dimensions: 530/500/H135 mm -Weight: 14 kg