Beli Gergaji Bundar Multilama Dengan Satu Mata Gergaji Bergerak bekas (11.935)

Tahun pembuatan: 1980, Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Lodpfxjf D H Hbo Aa Uorl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Ljdpfx Aey Dtpmea Uorl Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Table saw ULMIA 1710s Year of manufacture: 1982 Tilting angle: 45° Cutting length on sliding table: 750 mm Maximum blade diameter: 250 mm Cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table equipped with angle cutting scale Lodoufgnzepfx Aa Usrl Table dimensions: 1000 x 630 mm

Kondisi: sangat baik (bekas), Penawaran menarik dalam kondisi sangat baik: gergaji format dan mesin frais lengkap dengan alat Ljdpfjy Ni Ayex Aa Usrl

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 520 mm, CNC-controlled double-head mitre circular saw machine with electronic saw unit swivelling A high-performance circular sawing machine for the precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for single cuts—using both saw heads simultaneously to cut the profile—or in automatic mode, where the double-head saw operates as a single-head saw automaton. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135° Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cutting length in automatic mode: unlimited (the profile is pushed and pulled) Length of the accompanying roller conveyor: 2,300 mm Maximum space required: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with touchscreen and colour graphics on a movable control panel - Import and export of CSV / LTE files (for loading cutting lists from external CAD software) - Graphical profile display Optionally equipped with a label printer. Ljdpfx Aey Sty Ioa Uorl

Kondisi: bekas, Tahun pembuatan: 2001, de-to-hu Lrodownh Nispfx Aa Ujl

Tahun pembuatan: 2022, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 026702200004, Gergaji otomatis dua kepala Diameter mata gergaji 420 mm Ljdpoy Sac Nsfx Aa Usrl Printer barcode

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Schmidt Tempo EC 500 Circular Saw Blade Sharpening Machine For SHARPENING and RETOOTHING HSS and segmental circular saw blades, including chamfering of the tooth tops/backs. - Blade diameter: approx. 20 - 500 mm - Blade thickness: max. 6 mm - Operating speed: approx. 40-100 teeth/min - Grinding wheel diameter: max. 200 mm - Tooth count: 20-999 (electronically selectable) - Tooth forms: Pointed tooth A, AW, arc tooth B, BW, and C as per DIN 1840 (electronically selectable) Adjustment options: - Tooth form (electronically selectable) - Tooth count (electronically selectable) - Automatic infeed - Automatic finishing device - Relief grinding (electronically selectable) - Oscillating grinding (electronically selectable) - Cylindrical grinding (electronically selectable) - Regrinding of segments - Setting of rotation direction (electronically selectable) - Halving of tooth count (electronically selectable) for chamfering of teeth - Adjustment of tooth height difference - With LED display - Error message display Accessories included: - Soundproof hood - 10 grinding wheels, various widths - Small, medium, large saw blade mountings (60, 120, 180 mm diameter) - Small, large grinding wheel adapters (80, 120 mm diameter) - 1 set of standard reduction rings 16 x 20, 22, 27, 32, 40, 50 mm - Saw blade support - Operating manual, wiring diagrams Weight: approx. 880 kg Connected load: 2.5 kW Supply voltage: 400 V Paint finish: Green Lodshua E Djpfx Aa Uerl Machine is in very good original condition and can be inspected and tested under power. Machine is sold with a 100% functional guarantee upon delivery! Spare parts and accessories available if required. Subject to errors and prior sale.

Kondisi: sangat baik (bekas), Mesin-mesin individu tersedia untuk dibeli—silakan hubungi kami. VOLLMER CA200/CAL200 mesin pengasah mata gergaji Fitur utama: • 2 sumbu yang dikontrol secara numerik (CNC) • pengasahan otomatis • Kondisi teknis: sangat baik • Rel pemandu tanpa kelonggaran • Penutup sumbu X dan Y baru • Mekanisme pendorong yang telah diverifikasi, dilengkapi peredam kejut dan aktuator baru • Mesin pengasah dilengkapi unit roda penyeimbang otomatis • Sistem pembuangan individu • Pendorong kedua Lsdsyzrcaspfx Aa Usrl • Kompatibel dengan Vollmer N171 • Banyak suku cadang dan batu gerinda tersedia VOLLMER N171 PRIMULTINI BC – MESIN TEGANG untuk penegangan dan perataan mata gergaji pita PRIMULTINI BC – KEPALA TEGANG untuk penegangan dan perataan mata gergaji pita

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, BIMAX TA 91 Circular Sawing Machine TECHNICAL DATA Total power requirement, three-phase: 3 x 400 V For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-side circuit breaker: 16 A Power supply cable: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2 pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mounting: 32 mm Drive pin: 8 mm Lrjdpfxev I Dmls Aa Usl Bolt pitch circle: 45 mm Cut-off wheel mounting: 22 mm Saw blades: 160 x 1 up to 300 x 2 mm Passage range: round up to 65 mm guare up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameter: 10 – 60 mm Material feed length: 0 – 250 mm Weights: Saw: 500 kg Hydraulics: 120 kg No liability is assumed for the accuracy, completeness, and timeliness of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, pelindung bilah gergaji, Panel saw Robland model E3100 Mesin dalam kondisi sangat baik, berfungsi sempurna dan siap pakai. Ideal untuk pekerjaan presisi dan profesional pada panel dan kayu solid. Lrjdpfoy R D Slex Aa Usl ✔ Telah diperiksa dan diuji pada semua fiturnya ✔ Perawatan dilakukan pada komponen mekanis dan elektrik ✔ Gerak carriage presisi dan halus Mesin telah direkondisi oleh perusahaan spesialis servis dan perawatan. Hubungi kami untuk informasi lebih lanjut atau uji coba mesin.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 350 mm, Motor gergaji: 1,5 / 1,8 kW Ukuran mata gergaji: 350 mm 2 Kecepatan putar mata gergaji: 1400 / 2800 rpm Sudut gergaji tak bertingkat: ± 45° Ledpfxsy R Ehuj Aa Uerl

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Ledpfx Aajiy Ry Ae Uerl Weight: 490 kg

Kondisi: bekas, Tahun pembuatan: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Lrsdpfxoy Hqdaj Aa Ujl Weight: 490 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Engine power: 2.2 kW Manual feed of units Blade diameter: 330 mm 3000 rpm Maximum unit spacing: 3300 mm Cutting angle adjustment: -45/+45 degrees Vertical pneumatic clamps Cutting process activated by foot pedal Ljdpfxsy N Ribe Aa Ujrl Safety switch Width: 900 mm, Height: 1500 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 6226 ANGLED MITER SAW OMS INVINCIBILE OK 330 Lsdpfxsy N Rg Te Aa Ujrl Motor power: 1.8 kW Manual movement of units Blade diameter: 330 mm 3000 RPM Maximum unit spacing: 3500 mm Cutting angle adjustment: -45/+45 degrees Vertical and horizontal pneumatic clamps Cutting process initiated with two buttons Safety switch Width: 900 mm, height: 1500 mm Year: 2003

Kondisi: bekas, Tahun pembuatan: 2003, Diameter mata gergaji: 350 mm Diameter lubang: 30 mm Motor: 2 kW Kecepatan putar: 3800 rpm Diameter hisap: 95 mm Berat: sekitar 105 kg tanpa dudukan Lebar potong pada 90°: 430 mm Lebar potong pada 45°: 300 mm Tinggi potong: 135 mm Rem hidrolik anti-pantul Tanpa dudukan dan rel rol Lokasi penyimpanan: Nattheim Ljdpfx Asyw Tziea Uorl

Kondisi: baru, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €4,200 Saw blade diameter: 315 mm Saw blade dimensions: 315x32x63 mm Saw blade speed: 45 / 90 rpm Mitre left: 45° Lrodswmzfzspfx Aa Uel Mitre right: 45° Cutting capacity at 0° (round): 105 mm / (square): Cutting capacity at 45° right (round): 90 mm / (square): Cutting capacity at 45° left (round): 90 mm / (square): Motor: 1.3 / 1.8 kW Width: 600 mm Depth: 1000 mm Height: 1400 mm Weight: 200 kg Manual vice Sturdy double joint Low-voltage start/stop switch integrated in the handle Mitre cuts 45 degrees left and 45 degrees right Divided vice (clamps in front of and behind the saw blade) Saw blade not included

Kondisi: baik (bekas), Tahun pembuatan: 2011, WALTER FWR 500/2 Format Saw for Square Timber - Manufactured in Poland - Operating manual (DTR), CE marked - Year of manufacture: 2011 TECHNICAL PARAMETERS: - Minimum material length after formatting: 800 mm - Maximum material length after formatting: 1600 mm - Maximum material width: 480 mm - Maximum material thickness: 145 mm - Blade diameter: 500 mm - Infinitely variable feed speed: 0–20 m/min - Main motor power: 2 x 5.2 kW - Feed motor power: 1.5 kW Lodpfjh Dwmljx Aa Uorl Machine dimensions: 340 x 230 x 180 cm Weight: 2,500 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, frekuensi input: 50 Hz, lebar pemotongan (maks.): 1.250 mm, diameter mata gergaji: 400 mm, penyesuaian kemiringan mata gergaji: 45 °, kecepatan rotasi (maks.): 6.000 rpm, circular_saw_tecnomac_t45 Lrjdpfx Aoy N T N Rea Usl

Kondisi: bekas, Tahun pembuatan: 1995, nomor mesin/kendaraan: 20373, Fungsionalitas: belum diuji, daya: 4 kW (5,44 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 90 mm, diameter mata gergaji: 315 mm, penyesuaian kemiringan mata gergaji: 45 °, jenis penyesuaian ketinggian: mekanis, lubang pisau gergaji: 30 mm, kecepatan rotasi (maks.): 4.000 rpm, kecepatan rotasi (min.): 4.000 rpm, berat keseluruhan: 127 kg, tinggi meja: 850 mm, Perlengkapan: Penandaan CE, pelindung bilah gergaji, Scheppach meja gergaji bundar ts 4000, tinggi potong maks. 90 mm, pada 45° maks. 60 mm, diameter mata gergaji maks. 315 mm, dapat dimiringkan 0° hingga 45°, motor 4 kW (5,4 HP), meja geser 2.000 mm, perangkat angkat dan jalan, perluasan meja lipat, alat pemotong sambungan, pelindung mata gergaji SUVA, GS-diuji debu kayu dengan tanda CE, dijual sesuai kondisi di lokasi Seevetal, tanpa transportasi, penjualan sebelumnya dimungkinkan. Lsdpjy N Sfqjfx Aa Uorl

Kondisi: baik (bekas), Gergaji potong dan miring untuk aluminium. Dapat diputar ke kiri dan kanan hingga 45° serta dimiringkan hingga 45°. Diameter mata gergaji hingga 250 mm. Ledpey N S Hzefx Aa Ujrl

Kondisi: sangat baik (bekas), Nomor katalog 7885 DATA TEKNIS - diameter maksimum mata utama: 400 mm - tinggi potong maksimum: 120 mm Lsdpfx Aoyg Iifja Ujrl - mata utama dapat diatur naik/turun dan miring - pelindung mata besar - diameter spindle: 30 mm - panjang pemotongan di meja geser: 1400 mm - lebar pemotongan di pemandu: 1300 mm - dengan meja geser samping - pemandu di meja samping dapat diatur sudutnya - daya motor mata utama: 4 kW - 2 kecepatan putaran: 3000/4500 rpm - ukuran meja: 1120x1020 mm - ukuran meja dengan ekstensi: 1630x1730 mm - diameter pipa hisap: 80 mm, 140 mm - dimensi p/l/t: 3300x2180x1450 mm – berat 1040 kg KEUNGGULAN – produksi Polandia – dokumentasi DTR – gergaji bekas - kondisi sangat baik Harga netto: 9900 PLN Harga netto: 2360 EUR dengan kurs 4,2 EUR (Harga dapat berubah mengikuti fluktuasi besar)

Kondisi: sangat baik (bekas), Nomor Katalog: 7940 SPESIFIKASI TEKNIS - Diameter maksimum mata potong: 500 mm - Diameter spindle: 30 mm - Penutup pelindung mata potong - Dorongan hidrolik mata potong - Tinggi pemotongan: 140 mm - Motor utama: 4,4 kW - Dimensi meja (P x L): 570 x 870 mm - Tinggi meja dari dasar: 750 mm - Dua meja rol - Meja rol masuk: 1170 mm – meja rol keluar: 1210 mm - Lebar rol geser: 600 mm - Dimensi keseluruhan mesin (tanpa meja rol) (P x L x T): 1040 x 820 x 900 mm - Berat sekitar 570 kg KEUNGGULAN – Produksi Jerman – 2 meja rol – Gerakan pneumatik pada mata potong – Gergaji bekas dalam kondisi sempurna Lrsdpfxeywtr Uj Aa Ujl Harga netto: 13.900 PLN Harga netto: 3.300 EUR berdasarkan kurs 4,2 PLN/EUR (Harga dapat berubah mengikuti fluktuasi kurs yang lebih besar)