Beli Hsm 45 Vl bekas (10.145)

Kondisi: baru, pl-hu-001 Iaodpoyhhqxofx Am Rou

Kondisi: bekas, 01 Iodpfx Amey Iaa Ts Rjau

Kondisi: baik (bekas), mit Ständer und Gegengewicht Motorleistung 1,1 kW (900 U/min). Schleifspindel 310 x 250 mm. 2 Druckspindeln (Gummiauflage), Durchmesser 30 mm. Maschinenmaße 505 x 350 x 655 mm. Isdpfx Asd Hqvvjm Roau Gewicht 20 kg.

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 620 Ah, tegangan baterai: 80 V, tinggi total: 982 mm, panjang total: 1.640 mm, lebar total: 435 mm, Tested forklift battery for your truck - 80V 4PZS 620Ah - Special tray Iaodpjy Rnrcefx Am Rou + 1 year warranty + incl. aquamatic watering system + incl. end discharge cables & REMA 320 connector (other connector types available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length 1,640 mm Width 435 mm Height 982 mm Weight: approx. 1,600 kg Suitable for the following models and others: Dimos DMS 40/45 Common battery sizes available, please enquire. Transport possible.

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 775 Ah, tegangan baterai: 80 V, tinggi total: 784 mm, panjang total: 1.024 mm, lebar total: 852 mm, Tested forklift battery for your forklift – 80V 5PZS 775Ah – DIN A + 1-year warranty + Including aquamatic water refilling system + Including end discharge connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided with delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Iodpfxey Rnqfs Am Rsau Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00/Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Linde E35 H-/HL-387-00 Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/C/600H-388-00 Linde K 5231-00 / side design Linde P250-127-00 Linde P250L-127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Common battery sizes available; feel free to inquire. Transport possible.

Kondisi: sangat baik (bekas), HSM V-Press 825 plus baler Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Feed opening (width x height): 1195 x 530 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Isdpjv Akcijfx Am Reau Machine dimensions (width x depth x height): 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Waste materials: film, mixed paper, cardboard, die-cutting waste, textiles Year of manufacture: 2012-2014, price: 6,000 EUR HSM V-Press 825 pro baler, year: 2019-2021, price: 9,000 EUR

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 340 kW (462,27 hp), pendaftaran pertama: 11/2025, jenis bahan bakar: diesel, ukuran ban: 385/55-315/70-385 /55r22.5, warna: putih, kabin pengemudi: lain, tipe perpindahan gigi: semi-otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: pegas daun parabola (per), panjang total: 11.800 mm, lebar total: 25.500 mm, tinggi total: 31.000 mm, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 12.000 kg, beban gandar yang diizinkan (gandar 3): 8.000 kg, Tahun pembuatan: 2024, Perlengkapan: ABS, AdBlue, Bluetooth, Tachograph, kantung udara, komputer bawaan, kopling trailer, lampu depan tambahan, lampu kabut, pemantauan tekanan ban, pendingin udara, pendingin udara parkir, pengaturan jendela elektrik, retarder, riwayat servis lengkap, spion elektrik, Semua detail teknis dapat ditemukan secara rinci pada lampiran. Iasdey H Ht Depfx Am Reu

Kondisi: bekas, jarak tempuh: 532.000 km, daya: 330 kW (448,67 hp), jenis bahan bakar: diesel, konfigurasi gandar: 6x2, jarak roda: 6.200 mm, bahan bakar: diesel, rem: pengereman mesin, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, panjang total: 9.600 mm, lebar total: 2.550 mm, panjang ruang muatan: 8.150 mm, lebar ruang muat: 2.500 mm, Tahun pembuatan: 2021, Perlengkapan: ABS, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, spion elektrik,

Kondisi: siap digunakan (bekas), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, big bags, polystyrene HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860, new, demo model, year 2020, price: €13,000 Ijdpfx Asra Rbgom Roau 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000-1200 Bale weight (approx.): 500 kg Technical data: L x W x H (mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Pressed material: film, cardboard Idle cycle time: 25 s

Kondisi: siap digunakan (bekas), Model: Mesin Press Bal HSM V-press 1160 plus Tekanan (kN): 532 Berat bal tergantung material hingga 550kg Ukuran bal maksimum (mm): 1200x1100x1000-1200 Dimensi panjang x lebar x tinggi (mm): 1780x1150x2985 Daya (kW): 7,5 Berat (kg): 2300 Tahun 2007-2010 harga 5800 EUR Tahun 2011-2013 harga 6000 EUR TAHUN 2018 HARGA 6000 EUR Iedpsra Nyuofx Am Roau Kami juga memiliki Mesin Press Bal HSM V-press 1160 Max tahun 2014-2015.

Kondisi: diremaj di bengkel (bekas), panjang bal: 1.200 mm, lebar bal: 700 mm, tinggi bal: 800 mm, berat bal: 380 kg, Mesin press dalam kondisi ideal, tidak digunakan setelah renovasi. Perawatan hanya di produsen. Kondisi sangat baik. Operasi sepenuhnya otomatis. Panjang bal yang dapat diatur 600-1200 mm. Motor 15KW. Tahun 2007. Berat bal sekitar 380 kg. Iedpfjx S Sbdjx Am Roau

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 10 t, lebar bukaan pengisian: 580 mm, panjang bukaan pengisian: 900 mm, panjang bal: 800 mm, lebar bal: 500 mm, tinggi bal: 600 mm, berat bal: 100 kg, lebar total: 1.000 mm, tinggi total: 1.540 mm, panjang total: 4.700 mm, berat keseluruhan: 1.200 kg, daya: 6,8 kW (9,25 hp), panjang transportasi: 4.700 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Mesin telah direkondisi di tempat kami, telah dibongkar sepenuhnya. Silinder utama telah diganti seal-nya. Selang hidrolik baru. Oli hidrolik baru. Motor bawah oli. Kaca plexiglass telah diganti. Roller pemandu pelat tekan telah disetel ulang. Pengikatan horizontal manual tiga kali. Pengikatan dengan kawat. Panjang bal dapat disesuaikan: 400, 600, 800, 1000mm. Buku petunjuk beserta diagram kelistrikan dan hidrolik tersedia. Ijdpfx Asy D Dr Ssm Reau

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin press bal untuk bundel sekitar 400kg. Pabrikan: HSM Iodpfsy A Hu Hex Am Rsau Model: HL 3521 tahun produksi: 2006 Kondisi: baik Mesin telah menjalani servis besar. Pompa oli diganti. Silinder oli telah direnovasi. Setelah kesepakatan, dapat segera dijual dan dikirim.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Ijdpfx Ameyz Af Ej Rsau Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: bekas, Fungsionalitas: belum diuji, pl-hu-001 Iaodpfxswv Trls Am Rou

Kondisi: bekas, Tahun pembuatan: 2013, gaya penekanan: 40 t, Pabrikan: HSM Tipe: HL 4010 Re Tahun pembuatan: 2015 Ijdpeyq Ngtefx Am Roau Gaya penekanan: 40 t

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: +5°C to +45°C for temperature testing Test chamber volume: approx. 1300 L Simpac control system Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on modular construction. Individual modules can be added or replaced as required, allowing customization for different applications. They are suitable for plants with high light requirements such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Fresh air supply up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH: approx. 0.8 kW Performance data for climate testing under irradiation Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm Iajdpfxovz U Ers Am Rsu External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marked, on castors, very good condition Tube port ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Mesin press baling kertas bekas, kertas, film plastik, plastik, dan bahan organik lainnya untuk didaur ulang. Produsen: HSM Model: V-Press 825 plus pro - Sistem TCS (TorsionControlSystem) – kontrol kesejajaran pelat - Start/stop otomatis setelah pintu ditutup - Layar tampilan + penghitung bal dan jam operasi - Pengikatan manual (4 tali poliester) - Pintu geser dengan pengunci roda tangan Dimensi mesin: 1700 x 1250 mm, tinggi: 2370 mm Lubang pengisian: 1195 x 540 mm Berat bal: hingga sekitar 280 kg Dimensi bal: sekitar 1200 × 780 × 700 mm Kapasitas: ~2–5 bal/jam Tahun produksi: 2022 Tekanan tekan: 250 kN Daya motor: 4,0 kW Ijdpfeyyy Dpjx Am Rjau Berat mesin: 1200 kg

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 11.850 h, gaya penekanan: 88 t, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 De balenpers betreft een VK 88 R – FU, uitgevoerd met frequentieregelaars, 2 x 45 kW motoren. * Optie voor ontblokkeer-cilinder * Kogelgewrichtbevestiging hoofdcilinder * Stadler transportband, 1600 mm intern Bouwjaar: 2012 Totaal draaiuren: 11.850 De stang van de hoofdcilinder en het afdichtingsset zijn recent vernieuwd. Te vervangen: 2 voorste vloerplaten van de perskamer: midden en voorkant van het kanaal Smeren/vervangen: Enkele zijdelingse diabolorollen zijn gebruikt en in bedrijf; sommige zijn roestig, sommige in goede staat. De pers draait naar behoren en het knopen van de balen gaat goed. Aandrijfwielen ram: OK Zijwielen ram: OK Hoofdcilinderstang: vrijwel nieuw Hoofdcilinder afdichtingsset: vrijwel nieuw Ram zijnylon strips: 80-90% in goede staat. Fijnafstemming geometrie mogelijk door toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes/tegenmes: goed, ca. 70% Naaldrollen: in orde, maar vervangen is aan te raden + de afsluitplaten Hoofdfrequentieregelaar 1 van 2: Totaal 2 x 45 kW: één van de twee is defect. Het is niet bekend of deze vervangen wordt. De pers draait momenteel op één pomp. Zijwanden perskamer: Zijwanden zijn versleten ter hoogte van de nylongeleidingsplaten: enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt en vertonen lichte speling. Smering ontbreekt, maar zijn nog in goede staat. Geleidingsstrips zijn in orde. Opvoerlatten zijn vrijwel geheel versleten. Start/stop via frequentieregelaar. Zijwanden zijn goed op het schuine gedeelte en in de put. Draadrollenplatform: niet inbegrepen. Iajdpfx Aoyuyg Som Reu

Kondisi: bekas, Technical data: Pressing force: 178 kN Drive power: 4 kW Cycle time: 23 s Loading height: 928 mm Loading aperture width x height: 1195 x 558 mm Iaodpfx Amjv Akmzj Rou Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold strapping with polyester tape Year of manufacture: 2010-2013

Kondisi: bekas, Tahun pembuatan: 2015, Pabrikan: HSM Tipe: HL 4010 Re Tahun pembuatan: 2015 Iaedpeyibv Isfx Am Rou Gaya penekanan: 40 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah baris rak: 10, Karena penutupan pabrik gergaji kami, kami menjual berbagai mesin dan aksesoris (lihat gambar). Jika berminat, silakan hubungi kami. -Motor 45KW untuk mesin pencacah -Rak cantilever dua sisi, panjang 15m Iaodpfx Amoyi Erpj Rsu

Kondisi: bekas, Tahun pembuatan: 2012, gaya penekanan: 40 t, Pabrikan: HSM Tipe: HL 4010 Li Tahun pembuatan: 2012 Iajdjx H R U Sopfx Am Rsu Gaya tekan: 40 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Produsen: HSM Tipe: HL 4010 Li Tahun pembuatan: 2015 Gaya tekan: 40 t Iaedoyhbxcspfx Am Rou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Iodpfxeygud As Am Rjau Feed opening (W x L): 970 x 1,800 mm Bale dimensions (W x H x L): 1,100 x 750 x 600–2,000 mm Maximum bale weight: up to 700 kg or 800 kg, depending on material The baler feed system comprises the following components: - 1 fully enclosed STADLER chain conveyor with corresponding shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire spool carts - 1 multi-control unit for the baler - Complete engineering documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Binding type: Wire Suitable materials: plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The plant is operational and can be inspected during operation. The machine will be dismantled on 16th February and can then be inspected at our premises. Available immediately!