Beli Kragarmregal Sema bekas (160)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Fgodpsmhh Dtefx Alysf - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. Fgjdpfjguk Dvjx Alysf We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2018, Overview The packer was manufactured and commissioned in 2018 by the German company Sema Maschinenbau GmbH. Until now, it has been used in a filling line for fresh milk in glass bottles at a German dairy plant. The line’s capacity was 7,700 bottles per hour. Due to increased demand for milk in glass bottles in recent years, the owner decided to purchase a new system with a higher capacity. Therefore, this machine has become available. The machine is in very good condition, as it is relatively new and has only a low number of operating hours. Technical Data: Performance: 695 crates (with 12 bottles each) per hour Fsdel Hx Dmopfx Alyjgf 1333 crates (with 6 bottles each) per hour Formation: 2x3 (1L bottles) 4x6 (0.5L bottles) Gripper heads: for wide-neck bottles (adjustable if needed)

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), de_to_hu_it_lt_001 Fjdpsyu T Enjfx Alyjgf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, A Sema wrap-around packer for Tetra Rex soft packs is available. Output: single packs: 6,000/h, 6-pack tray: 1,000/h & 3.6s/tray, 10-pack tray: 600/h & 6s/tray. Documentation is available. An on-site inspection is possible. Fjdsttbdtopfx Alyogf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, A wrapper and packer for glass bottles from a bottling line are available. Bottle formats: 500ml/1000ml, crate formats: 6-pack/12-pack, pallet type: Euro pallet, height of loaded pallet min./max.: 500mm/1800mm, wrapping capacity: 60 pallets/h. Documentation available. On-site inspection possible. Fsdpfxottbdwe Alysgf

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, JCM-7000 menggabungkan navigasi sampel yang sangat sederhana dengan berbagai fungsi otomatis canggih. Ruang sampel yang besar, resolusi tinggi, dan mode vakum rendah opsional untuk sampel non-konduktif menjadikan desktop SEM ini sebagai solusi serbaguna dan portabel. Fgsdpfx Alozn Ih Asyef

Kondisi: baik (bekas), kragarmregal-beschreibung-2024 Fgsdjyu Um Topfx Alyef

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – New item - : Price ex works including loading! 1 rack unit with 4 uprights: €2,255 (net)! Fgodpfef Tv T Nsx Alyof Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional uprights (or by varying the axle spacing). This example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Uprights: IPE 180 Single-sided uprights approx. 3,700 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity at 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg Including longitudinal and diagonal bracing, c/c spacing = 1,300 mm, standard is 1.30 m – unless otherwise specified, we will supply the rack with a 1.30 m axle spacing. Other spacings available, e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or custom sizes! Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Supplied complete with all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Fgsdpenwmwvefx Alyjf Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Kondisi: baru, Tahun pembuatan: 2020, Single-sided cantilever rack, 6.30 m height, 1.20 m arms, 900 kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided uprights approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable arms Fgedpfjfivg Sex Alyof - Load capacity with 600 mm load center: 900 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 900 kg = 3,600 kg - Profiles: Frame: IPE220, Arms: IPE100 - With longitudinal and diagonal bracing (center distance = 1,300 mm, standard is 1.30 m) - Other standard bay lengths available from stock: 1.00 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - From 1.50 m length onwards, a small surcharge applies to the stated price - Custom dimensions (other bay widths) are available on request, but incur an additional charge and have a longer delivery time as they are custom manufactured. - If you do not specify a different bay width, the rack will be delivered with a 1.30 m bay width. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Delivery includes all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Fgjdpfxjfivg Rs Alyof You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Fgsdpfx Aleddmq Teysf Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, 1 racking unit with 4 uprights €2,120 (net)! Surcharge for cantilever arms with guardrails for this rack: €40 Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional frames (or by using different bay widths), this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright, approx. 3,500 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity with a load center of 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per storage level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, center distance = 1,300 mm; standard is 1.30 m. Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a length of 1.50 m onwards, a small surcharge applies to the stated price! Special dimensions (other bay widths) are available on request, but will also incur a surcharge and have a longer delivery time as they must be made to order! If you do not specify a different bay width, we will deliver the rack with a bay width of 1.30 m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany via parcel service directly from Würth), excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) are available! Please contact us! Fjdpfxjddmqne Alysgf

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! Fgjdsddmtcepfx Alyef If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Fodpfx Aoddmtqjlyegf Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! Fodpfxeddmpvo Alyegf A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can of course build longer or shorter racking units by omitting or purchasing additional frames (or by using varying axle spacings). This example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system comprising: Fsdpfeddmp Aex Alyogf - Single-sided racking uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity per arm (load center 600 mm): 750 kg / per upright 2,250 kg - With 4 uprights per level: 4 x 750 kg = 3,000 kg; arms IPE 100 - Supplied with longitudinal and diagonal bracing, c/c spacing 1,300 mm (standard is 1.30 m); if no other specification is given, racks will be delivered with 1.30 m axle spacing. Other spacings possible, e.g., 1 m, 1.25 m, or 1.50 m for a small surcharge, or custom measurements. - Standard overall length for a single row with 4 uprights is approx. 4,000 mm. - Delivery includes all bolts and nuts, but excludes floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us for advice!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 4.16m high, 1.20m arms, 750kg per arm – New –: Price ex works, including loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or adding uprights, or by varying the bay spacing. The example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Uprights: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity with load centre 600 mm: 750 kg per arm / 2250 kg per upright For 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces e = 1300 mm, standard is 1.3m – unless otherwise specified, we will supply the racking with a bay spacing of 1.3m. Other spacings possible (e.g. 1m, 1.25m) also available at a small surcharge: 1.5m or custom dimensions! Standard delivery length for one row with 4 uprights is approx. 4000 mm. Fgodpfx Aljddmp Ueyof Supplied with all bolts and nuts, without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, en-Kragarm rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or adding additional frames (or by varying the bay spacing); this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: • 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 Each with 2 x 3 adjustable arms, 1.20 m, load capacity 860kg per arm With bracing approx. 1.30 m • Upright, double-sided approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable arms per side Load capacity at load center 600 mm: 860kg per arm / 2,600kg per upright side Including longitudinal and diagonal braces, bay spacing = 1,300mm, standard is 1.30m. • Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Fodsddmqyopfx Alysgf • Special sizes (other bay spacings) are also available on request, but are subject to an extra charge and longer delivery time as these are custom manufactured! If you do not specify a different bay spacing, we will deliver the racking with a bay spacing of 1.30m. In this case, the length with a racking row of 4 uprights (3 bays) is approx. 4m. • Supplied with all bolts and nuts (shipped within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Photos shown are of a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Fgedpoddmr Nefx Alyef Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah baris rak: 10, Karena penutupan pabrik gergaji kami, kami menjual berbagai mesin dan aksesoris (lihat gambar). Jika berminat, silakan hubungi kami. -Motor 45KW untuk mesin pencacah -Rak cantilever dua sisi, panjang 15m Fgjdpfxeyi Erpe Alysf

Kondisi: baik (bekas), Tahun pembuatan: 2000, Penawaran 25521 Rak gudang lengan kantilever dua sisi untuk barang panjang – tanpa isi Data teknis: - 2 unit rak gudang kantilever dua sisi, masing-masing terdiri dari - 5 tiang dengan sistem plug-in, lengan penyimpanan dapat disetel ketinggiannya - Panjang per rak sekitar 4.150 mm - Panjang total sekitar 9.300 mm - 130 lengan penyimpanan - Tinggi tiang masing-masing sekitar 6.000 mm - Lebar tiang + lengan penyangga sekitar 1.700 mm - Kapasitas beban maksimum per lengan sekitar 400 kg - Kapasitas beban maksimum per tiang sekitar 5.000 kg Fedpfx Aex R Si Eolyogf - Jarak sumbu antar bagian rak yang dihubungkan diagonal sekitar 1,0 m - Jarak penyesuaian ketinggian lengan rak 125 mm - Ukuran lengan: P 700 x L 90 x T 70 mm - Ukuran tiang: L 250 x T 100 mm - Berat per tiang sekitar 400 kg - Berat per lengan sekitar 10 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, lebar penggilingan: 1.350 mm, berat keseluruhan: 4.600 kg, tinggi penggerindaan: 160 mm, jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 2.620 mm, tinggi benda kerja (maks.): 160 mm, lebar sabuk penghalus: 1.400 mm, lebar benda kerja (maks.): 1.350 mm, Heesemann HSM.3, Mesin Pengamplasan Serbaguna dengan Kepala Pengamplasan Melintang, Kepala Pengamplasan LdK, dan DB-S Mesin serbaguna dalam ruang yang ringkas Untuk kalibrasi, pengamplasan furnir dan cat, pembuatan tekstur, pemolesan, pengamplasan lapisan, penghalusan tepi, dan lainnya. - Pengukuran ketebalan benda kerja secara otomatis - Vakum yang dapat disesuaikan, terintegrasi dalam badan mesin - Penyesuaian ketinggian tidak menggunakan rantai yang berputar, tetapi penggerak langsung - Rol yang tidak digerakkan pada bagian masuk dan keluar (masing-masing 2 buah) - PC Industri 15,6", terminal di bagian depan kiri - Memori program hingga 1000 program - Kecepatan umpan 3 - 15 m/menit - Paket MMI - Program untuk pemeliharaan jarak jauh - Program untuk kontrol katup penyedot debu Fgjdpfeztafwex Alyjf - Kepala pengamplasan melintang, 15 kW, kecepatan sabuk pengamplas dapat disesuaikan, untuk pengamplasan furnir (memanjang dan melintang), pengamplasan cat, efek permukaan gergaji, dengan pembersihan sabuk pengamplas, batang tekanan dengan sistem pengaturan tekanan selektif yang dikontrol komputer CSD - Kepala pengamplasan memanjang dengan sabuk pelat tekanan dan fungsi kalibrasi 15 kW, kecepatan sabuk pengamplas dapat disesuaikan, untuk kalibrasi, pengamplasan halus, dan pengamplasan cat, dengan pembersihan sabuk pengamplas, batang tekanan dengan sistem pengaturan tekanan selektif yang dikontrol komputer CSD - Kepala sikat piring berputar DB-S, untuk pengamplasan halus, pengamplasan cat, penghalusan tepi, pengamplasan lapisan, pemolesan, pembuatan tekstur - Catu daya tanpa gangguan - Sistem Manajemen Energi EMS - Batang ionisasi dari atas - Perangkat pengumpul debu benda kerja dengan nozel udara bertekanan yang dapat dikontrol secara individual dan berputar, di dalam rangka mesin, program pembersihan ban berjalan - Lampu LED di dalam mesin - dan masih banyak lagi Mesin tersedia di ruang pameran kami untuk demonstrasi Inspeksi dan pengujian pengamplasan dapat dilakukan dengan perjanjian terlebih dahulu.

Kondisi: bekas, Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, tinggi penggerindaan: 150 mm, tinggi kerja: 150 mm, jenis penyesuaian ketinggian: listrik, tinggi benda kerja (maks.): 150 mm, 1. Very good condition 2. Year of manufacture: 1993 3. Electronic PLC control, Heesemann 4. Model/Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Maximum thickness of sanded elements: 150 mm MACHINE CONFIGURATION: Fodpfx Alow H Sk Tjyegf I – Crosswise aggregate with electronic sequential pressure - Main motor: 13 kW - Pneumatic photo cell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with sanding pad - Main motor: 13 kW - Sanding belt cleaning system with oscillation - Pneumatic pressure sanding pad - Pneumatic photo cell oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO CELL OSCILLATION - Pneumatic strip system with oscillation for cleaning belts III – Combination unit with sanding pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pressure sanding pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for elements after the main aggregate at the outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed speed adjustable with gear motor: 4 kW motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic cleaning system for the feed belt - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Machine suitable for lacquer sanding and intermediate lacquer sanding - Overall dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg