Beli Mesin Meninju Takik bekas (78.026)

Kondisi: baik (bekas), Tahun pembuatan: 1990, jam operasional: 39.687 h, Fungsionalitas: berfungsi sepenuhnya, Bruderer BSTA 200 High-speed stamping press. Maximum punching force: 200 kN / 20 t Speed range: 100 – 600 spm Year of manufacture: 1990. Feed unit BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Clamping plate dimensions: 510 x 400 mm Bed opening: 400 x 160 mm Maximum tool width between uprights: 410 mm. Lodetraadjpfx Ac Hoaf Connected load: 36 kVA Power supply: 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Control cabinet and controller included. Complete with all original technical documentation. Other high-speed presses in stock: Mabu, Schaal, Bihler, and other Bruderer models.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, penyesuaian silinder hidrolik: 40 mm, tinggi pemasangan: 2.500 mm, gaya penekanan: 30 t, panjang langkah: 40 mm, Automatic high-speed punching press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with two synchronized double-roll feeders for strip widths from 5 mm to 150 mm. Lajdpfx Ajvkfmrjc Hjf Logical interface control via PLC touchscreen. Numerically controlled punching operation (NC). With stroke and speed counter, programmable length, automatic stop. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Operating manual in English. Pressing force: 300 [kN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Worktable: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute, up to 10 per second. Maximum strip thickness 2.5 [mm]. Centralized lubrication. Power consumption 5.5 [kW] Technical air 5-10 [bar]. Warranty: 1 year. All specifications subject to change without notice.

Kondisi: baik (bekas), Tahun pembuatan: 1996, jam operasional: 51.573 h, penyesuaian silinder hidrolik: 51 mm, panjang meja: 510 mm, lebar meja: 400 mm, tegangan masuk: 400 V, Bruderer BSTA200M Laodpoq A Uahsfx Ac Hef High-Performance Stamping Press Max. Press Force: 200 kN (20 t) Stroke Range: 100 – 1800 spm Year of Manufacture: 1996 BBV 101/75 Feeder Unit on Right Side Max. Strip Width: 160 mm Max. Feed Length: 85 mm Adjustable Stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram Height Adjustment: 51 mm Clamping Plate Dimensions: 510 x 400 mm Bed Opening: 400 x 160 mm Max. Tool Width Between Columns: 410 mm Max. Strip Pass Width: 260 mm Connected Load: 36 kVA Power Supply: 400 V 50 Hz Control Voltage: 24 V Machine Dimensions (H x W x D): 2540 x 1661 x 855 mm Machine Weight: approx. 3,100 kg Safety enclosure not included with machine—sold separately. Control cabinet and control system. Includes all original technical documentation. Other high-speed presses in stock: Mabu, Schaal, Bihler, and other Bruderer models.

Kondisi: bekas, tinggi total: 5.100 mm, lebar total: 2.600 mm, gaya penekanan: 65 t, For sale: toggle lever draw press by Schuler PK No. 630 Lsdpfxewab T Ee Ac Hsaf

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Mechanical roller feeder BBV190/85 for mounting on BSTA50 Ledpfx Asr Hmprec Hoaf Left-hand mounting Driven via the main shaft/PTO shaft of the press – PTO shaft/mounting plate not included in delivery Mechanical feed length adjustment via spindle Drive shaft guard, tube type Including encoder mount

Kondisi: baik (bekas), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of manufacture: 1973 Model / Type: HR40NL Pressing force: 40 t Table size: 650 x 385 mm Ram size: 350 x 190 mm Throat depth: 175 mm Distance table – ram bottom edge: 300 mm Pass-through hole: 350 x 130 mm Ram adjustment: 80 mm Ram stroke: 0 to 70 mm, adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness, continuous stroke: mm (not specified) Strokes per minute: 40 to 180 /min Connection: 4 kW Accessories/Equipment: Gripper feed Lodpferdgncsx Ac Heaf Condition: good Weight: approx. 4 t Machine dimensions: 1,400 x 1,800 x 2,250 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.300 mm, penyesuaian silinder hidrolik: 100 mm, tinggi pemasangan: 500 mm, tinggi meja: 1.000 mm, lebar total: 2.200 mm, panjang meja: 1.400 mm, gaya penekanan: 200 t, lebar kabinet kontrol: 2.000 mm, panjang langkah: 160 mm, jarak antara tiang: 1.450 mm, lebar kerja: 1.100 mm, jarak antara dudukan samping: 400 mm, berat keseluruhan: 27.000 kg, jenis penyesuaian ketinggian: listrik, kebutuhan tinggi: 4.500 mm, persyaratan ruang panjang: 2.200 mm, lebar yang dibutuhkan: 1.800 mm, High-precision cutting and embossing press, U.T. accuracy of +/- 0.01 mm, ideal for manufacturing fuel cell stacks or hydrogen electrolyzers. The press is also suitable for (fine) blanking production, with a stroke rate of 1 - 70 cycles/min. Thanks to four connecting rod rams, off-center loads can be handled without any issues. Jamming or seizing of the press is also not possible. The press will be completely overhauled and delivered with a new Siemens S7 control system. Ljdpst Nf Agjfx Ac Hjaf

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: belum diuji, gaya penekanan: 20 t, panjang langkah: 38 mm, berat keseluruhan: 3.600 kg, BSTA 20 H, dengan BBV 190/85 feeding kiri, tahun pembuatan 1987, langkah ayun yang dapat diatur 8 hingga 38 mm, daya tekan nominal 20 t, lebar pemasangan alat maksimal 420 mm. Untuk suku cadang atau perbaikan. Dijual dalam kondisi "apa adanya" tanpa pemeriksaan teknis. Hubungi kami untuk informasi lebih lanjut! Lasdpfew S E Tlex Ac Hjf

Kondisi: bekas, Tahun pembuatan: 1991, Fungsionalitas: belum diuji, gaya penekanan: 20 t, panjang langkah: 51 mm, berat keseluruhan: 3.600 kg, BSTA 200E mesin stamping otomatis, tahun pembuatan 1991/2000, sudah direkondisi, feeder BBV 101/75 kanan, langkah dapat diatur 8 hingga 51 mm, gaya tekan nominal 20 t, lebar pemasangan alat maksimum 420 mm. Hubungi kami untuk informasi lebih lanjut! Lodpow S Hagefx Ac Heaf

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Laodjgpxc Sopfx Ac Hjf Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 5.100 h, Pressing force: 4,000 kN Table area: 3,000 x 1,400 mm (W x D) Clamping surface, table: 2,950 x 1,500 mm Clamping surface, ram: 2,950 x 1,240 mm Installation height: 600 mm (stroke bottom and adjustment top) Stroke rate: 5 - 100 spm, infinitely variable Stroke: 20...200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Features: - With servo technology, ram speed programmable - Table - clamping plates segmented and manually movable - 8-point slide guide - Motorized central oil lubrication - Automatic ram adjustment - Pneumatic ram weight compensation - Electromechanical stroke adjustment - Siemens & Fanuc control - Siemens Panel PC with mobile control console - 8-point tool safety system - Tool data storage - 2-channel pressing force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal slot for tool centering in ram - Vibration-absorbing machine feet - Drop-through opening in the table - Hydraulic ball rails in table - Tool change consoles for hanging tools Equipped with a complete coil line, manufacturer Lorenz Decoiler Load capacity: 80 kN Strip width: 20 - 820 mm Expansion range: 470 – 520 mm Coil diameter: max. 1,800 mm Ljdpfx Acopvlf Sj Hjaf Straightening machine Strip width: max. 820 mm Strip thickness: 0.5 – 4.0 mm Straightening cross-section: 1,600 mm² Number of rollers: 9 pcs., Ø 65 mm + 2 pcs. feed rollers Speed: 0 - 30 m/min Electronic roller feeder Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross-section: max. 2,400 mm² Number of rollers: 2 pcs. Ø 120 mm

Kondisi: baik (bekas), Tahun pembuatan: 1986, jam operasional: 10.000 h, Press force: 30 tons (approx. 270 kN) Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 1/min Stroke (fixed): 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Features: * Hydraulic clutch * Roller feed Brand: Sankyo Type: Variax V70 Strip width: max. 100 mm Laedpfxenl Sne Ac Hef Only approx. 10,000 operating hours

Kondisi: baik (bekas), Tahun pembuatan: 1984, Pressing force: 800 kN Stroke rate: 30 - 200 strokes/min, adjustable via PIV gearbox Stroke, adjustable: 20 - 100 mm Shut height: 500 mm (at largest stroke, slide up) Ram bolster: 75 mm Table area: 1,010 x 800 mm Pass-through opening: 700 x 150 mm Ram area: 860 x 700 mm Drive power: 22 kW Features: - 2 connecting rods - 8-point ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Electropneumatic stroke adjustment Including complete coil line, make ALBA, consisting of: Decoiler Maximum outside diameter: 1,400 mm equipped with: • Powered decoiler carriage • Hydraulic loading saddle • Hydraulic auxiliary drive • Hydraulic coil expansion 480 - 530 mm • Hydraulic traversing unit Laedjdhzf Iepfx Ac Hef • Hydraulic pressure roller, side adjustment via handwheel • Strip edge guide arms Straightening machine Type: Ma Ria 9 Strip width: max. 400 mm Strip thickness: 0.5 - 5.0 mm Number of feed rollers: 2 pcs, Ø 120 mm, upper hydraulically openable Number of straightening rollers: 9 pcs, Ø 60 mm, top rollers individually hydraulically adjustable, readings via micrometer, all rollers supported equipped with: • Hydraulic strip infeed assist, table with tongue and hold-down roller • Lateral strip guide on infeed with asymmetric adjustment • Lateral strip guide at outfeed • Outfeed roller basket • Loop control via sensors • Lateral loop guiding Roll Feed Type: Vhy 400 Strip width: max. 400 mm Strip thickness: max. 5.0 mm Height adjustment via hydraulic jack Press or coil line can also be offered separately.

Kondisi: baru, Tahun pembuatan: 2023, Sunrise IW-80SD pons- en knipmachine Specificaties IW-80SD: - Perskracht: 80 ton - Ponscapaciteit: Ø 26x22 mm / Ø 50x12 mm - Uitlading: 510 mm - Hoekstaal: 150x150x12 mm (90°) Lasdsvf I Rcepfx Ac Hef - Stripcapaciteit: 460x15 mm / 300x20 mm - Gewicht: 2.550 kg Meerdere modellen direct uit voorraad leverbaar.

Tahun pembuatan: 2026, Kondisi: baru, Specification: Max sheet size: 740 x 1,060 mm Min sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 9,000 sheets/hour Processable materials: Paper: min. 80 g/m² Laodpfx Acelyp Ems Hsf Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at feeder Blanking station Automatic non-stop delivery belt Centerline system Including operator platform 1 tool set Machine delivery time: 6-8 months after order

Tahun pembuatan: 2026, Kondisi: baru, Specification: Max. sheet size: 570 x 820 mm Min. sheet size: 230 x 280 mm Maximum die-cutting force: 1.8 MN Speed: 8,000 sheets/h Lajdpfolyqpdex Ac Hjf Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 3 mm Equipment: Sheet feeder Stripping unit Automatic non-stop feeder apron Centerline system 1 tool set Delivery time: 6-8 months after order

Tahun pembuatan: 2026, Kondisi: baru, Specification: Max. sheet size: 740 x 1060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at feeder Stripping station Automatic non-stop delivery apron Laedpfxelyqrcj Ac Hjf Centerline system Including operator platform 1 set of tools Delivery time for the machine: 6–8 months after order

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 28 t, ketebalan pelat baja (maks.): 6 mm, arus masuk: 35 A, Maschine in einwandfreiem Zustand! Ljdsrfww Nopfx Ac Heaf

Tahun pembuatan: 1984, Kondisi: baik (bekas), Bihler RM 40 (1984) - Multislide-Stanz-, Biege- und Umformautomat Laedpfjh T Ulyox Ac Hof Die Maschine ist mit fünf Schlitten abgebildet, ein sechster ist jedoch verfügbar. Mehrere Abwickler für Band- oder Drahtzuführung sind vorhanden. Die Maschine verfügt über eine 8-Tonnen-Presse sowie fünf bzw. sechs Schlitten – hydraulische Spannung für Draht oder Band. Eine Maschine ist mit einem zusätzlichen Zuführsystem an der Rückseite ausgestattet, das durch das Mittelloch geführt wird.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Gebrauchte TRUMPF Trumatic 200r CNC-Stanzmaschine zu verkaufen: Hersteller: TRUMPF Modell: TRUMATIC 200 Baujahr: 2000 Typ: CNC-Stanzmaschine Steuerung: Bosch CC 220 Stanzkraft (t): 16,5 Verfahrweg X-Achse (mm): 80 m/min Verfahrweg Y-Achse (mm): 55 m/min Simultane Positioniergeschwindigkeit (X+Y): 97 m/min Max. Blechdicke (mm): 6,4 Werkzeugwechselzeit (s): 1,5–6,5 Anzahl Werkzeugplätze: 15 Max. Lochdurchmesser (mm): 76,2 Max. Werkstückgewicht (kg): 150 Laodpfx Acjvq N Ndj Hjf Max. Hubzahl (1/min): 420 Bild von Stanzmustern: 6 mm Aluminium

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, DE Ledsr D R Ruopfx Ac Hsaf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 18 t, jangkauan kerja: 30.001.500 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.600 mm, Dijual Mesin Punch CNC Trumpf 3000 format besar bekas yang sangat terawat dan telah melalui servis penuh Lajdpfxjxrnggs Ac Hsf Pabrikan: TRUMPF Tipe: TruPunch 3000 (S11) Tahun: 11/2012 Area kerja: 3000 x 1500 mm - tanpa reposisi Rentang kerja sisi silang (sumbu X): 3000 mm Rentang kerja searah (sumbu Y): 1600 mm Kedalaman tenggorokan besar: 1600 mm Lengkap dengan kemampuan multi alat Tipe: S11 Video tersedia atas permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Gebrauchte Trumpf 500R 1600 mm Ausladung CNC-Stanzmaschine im Großformat zu verkaufen TRUMPF TRUMATIC T500R Großformat-Rotations-CNC-Stanzmaschine zum Verkauf Laodpfx Acjtltl Hj Hsf Diese Maschine bearbeitet Bleche bis zu 3 Meter x 1,5 Meter ohne Umpositionierung. Trumpf UK-Spezifikation: Hersteller: TRUMPF Modell: TRUMATIC 500R Typ: CNC-Stanzmaschine Steuerung: Bosch CC220 Stanzkraft: 22 Tonnen (220 kN) Multi-Tool-tauglich Trumpf TC 500R Revolverstanzmaschine: 3000 x 1500 mm Großformatmaschine Ausladung 1600 mm, 3 Meter Schiene TRUMPF TRUMATIC 500 CNC-Stanzmaschine mit Steuerung & Lufttisch Kapazität: 220 kN Baujahr: 1999

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 7.000 kg, Mesin ini dikonfigurasikan dengan 4 sumbu CNC sepenuhnya elektronik dan dilengkapi perangkat lunak terintegrasi yang menghasilkan program otomatis. Laedpfxowvbqie Ac Hsf Deskripsi: Diameter roda gigi maksimum: 400 mm Lebar roda gigi: 76 mm Langkah: 82 mm Putaran: 150 - 700 rpm Modul: min. 0,5 mm Modul: maks. 6 mm Berat mesin: sekitar 7500 kg Perlengkapan listrik: – Tegangan operasi: 380/400 V – Proteksi: 20 kVA Mesin dengan CNC Siemens 808D baru Drives dan Servomotor Siemens Update terbaru 2025 Layar untuk pembuatan program otomatis Siklus otomatis NR12 Termasuk: Konveyor serbuk Tangki pendingin Pelumasan otomatis Kontrol tekanan digital Pemandu hidrostatis

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, jam operasional: 8 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SG202640, panjang total: 1.500 mm, daya: 4 kW (5,44 hp), berat keseluruhan: 650 kg, lebar total: 800 mm, tinggi total: 1.150 mm, tegangan masuk: 380 V, masa garansi: 12 bulan, Pipe Shrinking-, Profilformmaschine SG40NC Maschinenmodell: SG40NC Produktbeschreibung: Mikroprozessor-gesteuert und hydraulisch angetrieben. Ausgestattet mit einem mobilen Fußschalter mit drei Funktionen: Automatikbetrieb, Not-Aus und Dauer-Not-Aus – für höchste Arbeitssicherheit. Fähig zu mehreren Bearbeitungsverfahren wie Rohrumformung, Rohraufweitung, Rohrendenstauchen und Aufweitung (Bulging). Die bearbeitbaren Rohrformen umfassen Bördel-, Wulst-, Langloch-, Flach-, Vierkant-, Trichter-, Winkelform-, V-Form-, offene Bogenform u.a. Die Formwerkzeuge (Matrizen) sind wechselbar, um verschiedene Produkte je nach Kundenanforderung zu fertigen. Der Werkzeugwechsel ist einfach und unkompliziert, was flexible Produktion ermöglicht. Die Maschine zeichnet sich durch eine kompakte und robuste Bauweise aus, arbeitet hydraulisch, läuft ruhig, mit hoher Ausbringungsrate, minimaler Vibration und niedrigem Geräuschpegel. Sie kann Rohrendenverjüngung, -aufweitung, -wulstung, -bördelung, Riefenprägung und weitere Formgebungsverfahren durchführen. Geeignet für die Bearbeitung unterschiedlich geformter Verbindungsstellen bei Rohranschlüssen (für Einsteckverbindungen), KFZ-Ölleitungen, Lüftungsrohren, Wasserrohren und Klimaleitungen. Laodpfx Ajyak Ikec Hef Maximale Rohrumformkapazität mm: Ø40×2mm Maximale Rohrumformlänge mm: 100mm Motorleistung kW: 4 Gewicht kg: 600