Beli Rotox Stasiun Perakitan Jendela bekas (1.885)

Kondisi: bekas, Keyway spindle: 1 unit Number of milling units: 5 units Spindle diameter: 50 mm Weinig Unicontrol 11 window production line with extensive tooling Detailed machine descriptions available as PDF attachment ----- Optional available (at additional cost): - Weinig Univar 6 rebate machine - Götzinger PowerDrill drilling and milling center for windows and doors Technical manufacturer’s description: ----- Position 1: Weinig Unicontrol 11 Window Production Line ----- Including available tooling: - IV 67 timber and timber-aluminium - IV 77 timber and timber-aluminium - IV 90 timber Crosscut saw ----- With laser guide, motor power 3 kW, spindle diameter 40 mm, Spindle speed electronically adjustable with brake 3,000–6,000 rpm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatic to 8 positions for edge rounding from above Horizontal rounding unit (bottom) Motor with brake: 1.5 kW, spindle diameter 20 mm, tool clamping length 25 mm, Speed: 9,000 rpm Axial travel mechanically linked to crosscut saw Radial adjustment pneumatic Tenoning and slotting spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Radial adjustment: fixed 1st profiling spindle (climb and conventional milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm Axial travel: 350 mm, NC axis Reference position below table: 5–10 mm 2 feed rollers opposite spindle, axially pneumatic adjustable, 8 positions 2nd profiling spindle ----- Nedpfxsy T R Tuo Aa Usct Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm with counter bearing Axial travel: 350 mm, NC axis Reference position below table: 5–10 mm 2 feed rollers opposite spindle, axially pneumatic adjustable, 8 positions Horizontal profiling unit (top) ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Spindle speed: 9,000 rpm Maximum tool diameter: 130 mm Pneumatic adjustment to 8 positions, axial and radial Vertical profiling unit right end of machine ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Pneumatic adjustment to 8 positions, axial and radial Additional equipment ----- CNC length stop, mounted on slotting table For lengths up to 3,500 mm, including positioning crosscut saw integrated in the control system. Studio window device, 60° tiltable to both sides Double-part package with automatic separation and handover Synchronous feed with window automation for rebating Rebating trolley for rebating small sash widths Air conditioning unit in control cabinet PC-based NEXUS control system Automatic turning system Lamella conveyor, including conveyor belt for return transport of workpieces to operator -----

Kondisi: bekas, Keyway spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – Spindles with CNC-controlled radial and axial adjustment --- Technical manufacturer description: Equipped with the following machining units: Cross-cut saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically to 8 positions for edge rounding from above Edge rounding unit from below --- axial adjustment synchronized with cross-cut saw Tenoning and slotting spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing circle min. 380, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment to 8 positions, axial and radial Vertical profile milling unit, right side at machine end --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment to 8 positions, axial and radial Additional equipment --- Length stop CNC-controlled, mounted on the slot table for lengths up to 3,500 mm, incl. positioned cross-cut saw integrated in the control system. Studio window setup, swiveling 60° to both sides Double workpiece package with automatic singling and transfer Parallel feed device with window automation for rabbet cutting Rabbet wagon for processing small sash widths Air conditioning unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, including transport belt for returning workpieces to operator --- Price for the above machine on request! --- Njdjy T R Thspfx Aa Usct Tooling option: Window cut profiles – see PDF attachment IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors --- (technical data as per manufacturer – subject to confirmation) All prices quoted are net, plus VAT.

Kondisi: bekas, Okoma angle combination UF1 S and rebating machine UF2 EG incl. tooling for IV78 wood, IV78 wood front doors, IV78 wood-aluminium windows Gutmann with straight and slanted cheek For sale on behalf of customer ----- Technical manufacturer description: Okoma UF 1 S Slotting and Profiling Machine – Rebating Machine ----- Compact, heavy-duty window production center in cast design, consisting of: Cross-cut saw operating from above with 12 position revolver stops, forced-guided saw guard for accident prevention Slot spindle 40 mm diameter x 252 mm, double stroke for 3 tool positions (stroke height 83 mm), motor 7.5 kW Roller table adjustable on both sides 0-60 degrees automatic feed with various steplessly adjustable speeds, double pneumatic clamping, length stop LAS 3-position system 2300 mm automatic transfer to profiling station Profiling spindle 40 mm diameter x 252 mm pneumatic stroke for 2 tool positions 7.5 kW motor, spindle horizontally adjustable to the tool run-off edge, front milling fence jaw adjustable Glazing bead saw with 3 kW motor, 4-position revolver head adjustment, heavy-duty articulated feed stepless 0-25 m/min adjustable, roller sets pivotable inward and outward counterstop with 5-position revolver head frame milling device ----- 1 OKOMA Rebating Automation Model UF 2 EG ----- 1. Power supply: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air consumption: 13 NL/min Operating pressure: 8 bar Treated air: per Pneurop 6611 2. Profile Spindle 1: - Spindle position: right - Power: 11 kW - Speed: 7000 rpm - Rotation: clockwise and counterclockwise - Spindle diameter: 40 mm - Usable length: 252 mm - Max. tool diameter: 230 mm - Vertical positioning of profile spindle Drive: pneumatic cylinder 120 mm stroke for 2 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder, forward-back Position indicator: limit switch - Automatic plunge: Plunge speed adjustable for splinter-free rebating - Safety and extraction hood with 140 mm dia. connection 3. Profile Spindle 2: - Spindle position: right - Power: 11 kW - Speed: 7000 rpm - Rotation: counterclockwise - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical positioning of profile spindle Drive: pneumatic cylinder 90 mm stroke for 3 tool positions Ncodpfxsy T R Tbe Aa Ust Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder, forward-back Position indicator: limit switch - Safety and extraction hood with 140 mm dia. connection 4. Fitting Milling Device EG: - Spindle position: right - Drive: three-phase motor 3 kW - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: none - Horizontal positioning Drive: pneumatic cylinder, forward-back Position indicator: limit switch (rear only) - Safety and extraction hood with connection 80 mm diameter 5. Stop positioning: - 1st stop: in front of spindle 1 manual chip removal Quick adjustment via parallelogram - 2nd st...

Kondisi: baru, Maximum workpiece length: 3,800 mm Milling spindle: 1 piece Main motor: 15 kW Controller: Maestro active windoor Windor NT 1 ANGULAR MACHINING CENTER FOR WINDOW AND DOOR PRODUCTION --- Manufacturer’s Short Description: Windor NT1 is the angular machining center for the production of windows and doors. Despite its compact dimensions, it is capable of performing all processing steps such as cross-cutting, tenoning, boring, milling, and profiling. It operates completely independently of design concept, joint type, cross-section, etc. --- Technical Manufacturer Description: Position "1": Cross-Cut Saw Unit Features: - Motor power: 4 kW (5.5 HP) - Speed: 3,000 rpm - Max. tool diameter: 400 mm - Saw blade bore: 80 mm / Flange diameter: 100 mm - Pneumatic vertical positioning ON/OFF - 1 extraction port, diameter: 160 mm Position "2": Tenoning and Slotting Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 3,500 rpm - Max. tool diameter: 320 mm - Max. tenon depth: 105 mm - Axial stroke below table: +15/-300 mm - Automatic anti-splinter device "Jolly" - Maximum tenon angle: ± 60° - Vertical positioning through M.C. brushless motors - Left-hand rotation - 1 extraction port, diameter: 200 mm Position "3": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) - Right-/left-hand rotation - Climb cutting function for anti-splinter protection during rebating Position "4": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) Position "5": "DUO" Unit Shadow groove unit complete with: - Spindle diameter: 50 mm - Spindle length: 3 mm - Speed: 9,000 rpm - Tool diameter: 154 mm Unit for glazing bead cutting and/or hardware milling with: - Spindle diameter: 30 mm - Spindle length: 35 mm - Speed: 6,000 rpm - Max. tool diameter: – Saw blade for glazing bead cutting: 200 mm – Tool for hardware milling: 240 mm Common features: Ncjdpfoy T R S Rex Aa Uet - Pneumatic angle rotation with 2 positions: 0°-90° - Pneumatic in/out of operation ON/OFF with 5-position turret stop - Manually operated axial positioning - 1 extraction port, diameter: 160 mm --- Maestro active windoor The machine control is organized on two levels. The first level comprises an industrial numerical control from BECKHOFF, which executes all SPS control functions. The second level is an industrial PC, the "eye-M evo" console, which serves as the interface between operator and machine.

Kondisi: bekas, Tahun pembuatan: 2011, Länge 5000 mm Breite 100 mm Höhe 2800 mm Baujahr 2011 Range+Heine paint finishing line For the coating of individual wood window parts and frames Being sold on behalf of a customer Technical Manufacturer Description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Designed for use with coatings from the respective manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 rails/shift, i.e. approx. 60 window units/shift (without forced drying) Process (one cycle is run through twice): - Flooding - Drying - Inspection, sealant application - Spraying - Drying Pos 1 Conveyor Technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially consisting of: 3 drives with geared motors for main chains with frequency-controlled speed (see layout). Various track rails, horizontal bends, chain tensioning stations, pneumatically/electrically controlled stop stations 50 rails, 5,000 mm long (max. load 250 kg) Ncedpey Ty E Hefx Aa Ujt Automatic tilting of rails for drainage after the flooding unit 1 conveyor control system (Siemens S7-300 PLC) Programmable buffer stock Continuously variable drive units 1 lifting/lowering station for loading/unloading of workpieces (max. stroke 2,000 mm) 1 steelwork set for fastening the conveyor system Pos 2 Flooding Unit 1 flowcomat II-P 1 unit for clear priming Maximum workpiece width: approx. 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flooding lances, each equipped with max. 3 nozzles 1 cleaning accessories set 1 externally mounted stainless steel sieve 1 paint supply 1 control system Pos 3 Additions to Flooding Unit 1 drain channel and surface in the flash-off area behind the flooding unit After flooding, the rails move into a drip buffer. The dripping coating material is collected on the PP non-stick collection surface (and channel) and returned to the flooding unit. Rinse water is collected in the flooding unit and pumped out. The use of PP in paint-contact areas allows for easy cleaning of dried-on coatings. 1 humidification unit 1 control unit for the humidifier, complete with controller for humidification volume 1 hygrostat for detecting ambient humidity and activating humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation unit 1 R+H WACO 200 coagulator – 200 l collection tank Pos 4 Top Coat Spray Booths 2 spray booths for top coat application 2 extraction walls with sandwich panel cladding as per work area Fan: 16,000 m³/h Filter area: -3 sets of Ecola pre-separators -1 set Paintstop filters -1 set bag filters Recirculating air distribution ceiling in tension frame design Volume: 12,000 m³/h approx. 75% recirculating air – 25% exhaust air operation (extracted from the production hall) Installed on site-specific foundation as per layout 2 Prolac overspray recovery columns Pos 5 Additions to Top Coat Spray Booths 3 humidification nozzles for the flash-off area after top coating

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, SPESIFIKASI LINI Ncsdpfx Aaey S E E Nj Uot Mesin Las 4 Kepala FUSION 4H Unit pelepasan bingkai Modul frais pertama Q-MATIC 1 Koneksi serial antara mesin las dan pembersih Meja pemutar Mesin pembersih elektronik TRIMMER 4A Meja ekstraksi Modul frais kedua Q-MATIC 2 Laptop pengawas lini Unit pemotong sisa Unit pelepasan bingkai otomatis

Kondisi: hampir baru (bekas), jam operasional: 250 h, SHI Machines Type: BlueBox Virtually as new with only 250 operating hours! Technical data: Power: 120 kW Nodpfsy Tg R Nsx Aa Uoct Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories etc.: 1 coupling 120 – steel, incl. adapter Coupling size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x coupling steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter assembly tool Coupling 120 – CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter assembly tool CISPR 25 test bench made of wood on castors for EMV-BlueBox 120 Size 2500 x 1000 x 900 mm Load capacity of up to 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data, all information is provided without liability!) For further questions, please do not hesitate to contact us by phone.

Kondisi: bekas, WEBO multi-spindle drilling machine with 4 stations, Model B 20 Serial Nos.: 376/13; 376/14; 376/27; 376/36 Year of manufacture: approx. 1970 Drilling capacity: 20 mm Spindle taper: MK 2 – long quill Distance between drilling heads: 335 mm Throat depth: 260 mm Quill travel: 190 mm Table size: 350 x 1500 mm Distance spindle/table: min. 30 mm / max. 700 mm Spindle speeds drill head 376/13: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Ncsdpfx Aajihmwte Ust Spindle speeds drill head 376/14: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Spindle speeds drill head 376/27: 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm Spindle speeds drill head 376/36: 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm Motor power: 1.1 / 1.3 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustment via 2 motor speeds and 4 stepped V-belt pulleys - Drill head height adjustment via rack-and-pinion with hand crank approx. 300 mm - Height-adjustable drill table approx. 350 mm Space requirement (L x W x H): 1750 x 1100 x 1900 mm Weight: 1900 kg In good condition

Kondisi: bekas, 1 Ncodpfx Aaei Aqgte Ust

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Nsdswypqljpfx Aa Uoct Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: bekas, Flexible milling cell with 6-axis industrial robot ABB - CARAT type IRC5 / IRB 2400 M2004 Robot milling system with rotary change table featuring 2 workstations, robotic cell Serial No.: 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB type IRB 2400/16 M2000 Control system: ABB type IRC5 with Teach-In Panel HF milling spindle PERSKE type KRS 35.3-2, power output 1.2 kW, speed range 17,400 to 23,200 rpm Robot handling capacity: 16 kg Ncjdpeyaq Nuofx Aa Uet Weight of robot only: 380 kg Table size (Table 1) with aluminum tabletop: 500 x 500 mm Table size (Table 2) with Pertinax tabletop: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete system is designed as a compact milling cell with a shuttle table - Control cabinet and robot control cabinet are mounted compactly on the milling cell - Motorized rotary indexing table (presumably WEISS make) with fixed indexing: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - During the milling cycle, one side of the rotary table can be reloaded with new workpieces - Front safety guard with light barriers for monitoring during the 180° rotation of the table Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of the milling cell: approx. 4,000 kg Very good condition The milling cell has been used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge processing, milling of cutouts, drillings, etc. Also suitable for plastic machining or similar applications. If interested, please request a video from us.

Kondisi: baru, Tahun pembuatan: 2008, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1753, berat keseluruhan: 450 kg, tekanan kerja: 250 batang, panjang total: 1.420 mm, tinggi total: 1.420 mm, jenis arus masuk: tiga fasa, lebar total: 900 mm, kapasitas tangki: 160 l, tegangan masuk: 380 V, kapasitas pompa: 65 l/menit, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, daya: 18,5 kW (25,15 hp), tekanan pengiriman: 250 batang, berat kosong: 450 kg, Lokasi: Fohnsdorf, Austria Tersedia segera Nedjlhqdmepfx Aa Ujct

Kondisi: baik (bekas), Worktable with T-slots Overall dimensions: 1500 x 1200 x 800 mm Ncsdpfsk E Hbzex Aa Ujt Weight: 2820 kg

Kondisi: bekas, Welding table with "dovetail" clamping slots Dimensions: 1100x1400x800 mm Weight: 1880 kg Ncsdpfx Aohyxa Asa Ust

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 160.000 km, pendaftaran pertama: 06/2016, jenis bahan bakar: diesel, berat keseluruhan: 2.743 kg, bahan bakar: diesel, warna: putih, kelas emisi: Euro 5, jumlah tempat duduk: 6, Tahun pembuatan: 2016, Perlengkapan: ABS, kantung udara, lampu kabut, pendingin udara, pintu geser,

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, bag-discharge-station-en-it Nodpfx Aaoy Ubu So Uect

Kondisi: bekas, Tahun pembuatan: 2012, TGW belt conveyor conveyor belt transfer GF 3520-490-360 RA2034 Technical data: Conveyor length (NL): 3520 mm Frame width (NB): 490 mm Belt width (GuB): 360 mm Overall height (BH): 115 mm, 330 mm with motor Support feet: available optionally Conveying speed (v m/s): currently no motor installed, please specify your required conveying speed Drive: SEW gear motor Electrical data: 50Hz, V380-500, kW according to your specifications Year of manufacture: 2012 Optional extras: Frequency inverter Supports Ncodper Ht I Ssfx Aa Ujt Side guide (single-sided and double-sided) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The demineralized water station is used for the production of so-called demi water using ion exchange technology. The station consists of 3 columns: Ncodpfjfz Dwzex Aa Ust - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 type demineralization stations feature fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called partial demineralized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle - Strongly basic anion exchanger operating in the chloride cycle - Carbon filter Njdpfx Ajfz I Nhja Ujct Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION Ncedpfx Aefz I Syoa Uet The so-called semi-deionized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Piping The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called demi-water is produced from the demineralized water station using ion exchange technology. Njdpjfz I Uiefx Aa Usct The station consists of 3 columns: - Strongly acidic cation exchange resin operating in the sodium cycle, - Strongly basic anion exchange resin operating in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-treated water station is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchange column operating in the sodium cycle, - Strongly basic anion exchange column operating in the chloride cycle, - Carbon filter Nodpfx Asfz Nakja Ujct Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half demineralized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, Ncodsfz I Npjpfx Aa Ust - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-demineralised water station is produced from the demineralised water plant using ion exchange technology. Ncedjfz I Srspfx Aa Uet The station consists of 3 columns: - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter. Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), AERZEN GM90 S blower station no. 896925, year 2008 Blower Model: GM90 S, serial no. 896925 Capacity: 59.80 m³/min Pressure: 1 bar Power: 93.80 kW Year: 2008 Motor Manufacturer: AERZEN Power: 110/125 kW Ncedpfov D Ey Eox Aa Ust Serial no.: OC30249 Year: 2008