Beli Spinner Ts66Lmc Cmz Tl20M bekas (132)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AB1038, jarak pergerakan sumbu X: 1.160 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 1.160 mm, panjang umpan sumbu Y: 610 mm, panjang umpan sumbu Z: 610 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: Sinumerik 840D, lebar meja: 610 mm, panjang meja: 1.320 mm, kecepatan rotasi (min.): 12.000 rpm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 7.000 kg, panjang alat: 200 mm, berat alat: 5.000 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mesin tidak digunakan dalam produksi seri. Akurasi: ±0,01 mm Gjdpfey T Nggox Aa Dsud Terawat secara rutin, baik secara elektronik maupun mekanik, mis. ball screw baru telah dipasang 1 tahun yang lalu. Dilengkapi dengan oil mist separator Sedang digunakan setiap hari hingga akhir Juni 2026 (dapat dilihat saat operasi sampai waktu tersebut). Harga net

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AB1052, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 410 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 560 mm, panjang umpan sumbu Y: 410 mm, panjang umpan sumbu Z: 410 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: Sinumerik 840D, panjang benda kerja (maks.): 650 mm, lebar benda kerja (maks.): 450 mm, tinggi benda kerja (maks.): 450 mm, berat benda kerja (maks.): 250 kg, tinggi total: 2.500 mm, panjang total: 2.000 mm, lebar total: 3.000 mm, lebar meja: 450 mm, panjang meja: 650 mm, beban meja: 250 kg, kecepatan rotasi (min.): 12.000 rpm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 4.000 kg, panjang alat: 200 mm, diameter alat: 77 mm, berat alat: 5.000 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Mesin tidak digunakan dalam produksi seri. Akurasi: ±0,015 mm Dirawat secara rutin, baik secara elektronik maupun mekanis – misalnya, dua tahun lalu telah dipasang ball screw dan rel linear baru. Gjdpfoy Tv Nnex Aa Dsud Dilengkapi dengan pemisah kabut oli. Dalam penggunaan harian hingga akhir Juni 2026 (dapat dilihat beroperasi sampai saat itu).

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 220 mm, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 240 mm, jarak lintasan sumbu Y: 90 mm, jarak gerak sumbu Z: 580 mm, No reserve price – guaranteed sale to the highest bidder! The original price of the machine was €342,000! Gusdpfx Aajy Ukhhe Dsd Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. passage / max. clearance: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance / distance between centers: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main Spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter Spindle / Sub-Spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Centre Morse taper: MT3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool Holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven Tools Number of rotating stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque / S1: 42 / 32 Nm Fluids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubrication oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage per table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS CNC control: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with one set of soft jaws for right spindle Measuring arm Hinged belt chip conveyor with side discharge Upper turret station (T1) dual high-pressure pump (6+15 bar, 55 l/min) Internal turret station (12) dual high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic workpiece unloader Workpiece unloader with pneumatic open/close function for collecting ejected parts Pneumatic part ejector for sub-spindle with 100 mm stroke, stroke adjustment, and end position sensor Unimag interface for bar feeder

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 460 mm, kecepatan spindel (maks.): 3.500 rpm, model controller: Fanuc 32iTB iHMI, kecepatan spindle sekunder (maksimal): 4.500 rpm, cmz_turning_milling_center Godpjy Hk Niofx Aa Doud

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, nomor mesin/kendaraan: VT0341, Fungsionalitas: berfungsi sepenuhnya, High-Performance Machining Center SPINNER VC850-5A Travel Paths: X850, Y510, Z510 mm High-Performance Milling Spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm Built as an integrated hybrid spindle with direct drive (without belt) Spindle Tool Interface: HSK63 TOOL MAGAZINE with 32 tool stations LINEAR SCALE DIRECT MEASUREMENT SYSTEMS on X/Y/Z axes Latest generation SIEMENS CNC control “SINUMERIK ONE” - SPINNER SPIOS 24" touch operating panel, designed for I4.0 applications - Height-adjustable, rotatable, and tiltable panel for optimal ergonomics - Incl. engraving cycles - 24" flat color LCD touchscreen - 2 GB user memory - 15 work offsets - 1 free USB interface - Ethernet interface (standard) SPINNER MULTI-CONTROL-WHEEL integrated into the operator panel for the following functions, with all core setup features combined in one element: - Electronic handwheel function in jog mode - Feed override in automatic mode - Start button and feed adjustment in single-block setup mode, automatically resets to 0% at the end of program block Electrical pre-wiring for HOWIMAT 2-axis rotary-tilt table (for VC850/VC1150) 2-axis ROTARY-TILT TABLE mounted on the right side of the work area – exceptionally rigid and space-saving, suitable for chuck or collet fixtures TILT AXIS: - Indexing accuracy: ±0.005 degrees - Swivel range: 105 degrees - Maximum tangential torque: 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: - Indexing accuracy: ±0.005 degrees - Bore diameter: 80 mm, spindle nose D=160 mm - Maximum tangential torque: 500 Nm UNIVERSAL CHIP CONVEYOR VC850 SPINDLE PREPARATION FOR HIGH PRESSURE to use the auxiliary tank up to 70/80 bar HIGH PRESSURE TANK 70 bar with paper band filter for center-through-spindle flushing Additional air blast at the spindle head Central compressed air through the milling spindle Washdown gun in the work area PREPARATION FOR SPINNER STANDARD PROBE SYSTEM Wireless SPINDLE PROBE ADDITIONAL TOP COVER for enclosed work area STANDARD DOCUMENTATION IN GERMAN Consisting of machine and CNC manuals, supplied in digital form on the control. Paper manuals available at extra cost. LIFTING EYE SET for crane unloading, set of 4 pcs (mandatory for crane transport) STANDARD TWO-TONE PAINT: light grey RAL7035 and blue grey RAL5008 Guodpfx Aajy S Ttzj Dod Electrical Specification to EUROPEAN STANDARD: Mains voltage 3 × 400 V ±10% Line frequency 50 Hz (±2%) TN network (5-wire system) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images may not necessarily show the specific machine, but rather a comparable unit. Displayed accessories such as fixturing or tool holders are only included if listed in the technical description. Request a detailed quotation ex works. Visit our factory near Munich or one of our showrooms. We may also have other offers for comparable machines. Interim sale is expressly reserved.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: VT0479, VC850 Travel range: X 850 mm, Y 510 mm, Z 510 mm High-performance milling spindle up to 12,000 rpm Built-in hybrid spindle with direct drive, no belt Spindle taper: SK40 DIN 69871 with pull stud DIN 69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations LINEAR ENCODERS on X/Y/Z axes Control: SIEMENS 840DE, includes: - SPINNER SPIOS 24" touch panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for maximum ergonomics - Includes engraving cycles - 24" flat color LCD with multi-touch functionality - 2 GB user memory - 15 zero shift offsets - 1 USB port - Standard Ethernet interface Latest control generation: SIEMENS "SINUMERIK ONE" - SPINNER SPIOS 24" touch panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for maximum ergonomics - Includes engraving cycles - 24" flat color LCD with multi-touch functionality - 2 GB user memory - 15 zero shift offsets - 1 USB port - Standard Ethernet interface SPINNER MULTI-CONTROL WHEEL integrated in the panel for the following functions in one control element: - Handwheel mode for jog operation - Feed override in automatic mode - Start button and feed override in single block setup mode, self-resetting to 0% at program end -> All key setup functions integrated in one control element - SHOPMILL - 3D SIMULATION - REST MATERIAL DETECTION - DXF Reader Fully integrated 1-axis TILTING TABLE SP, centrally mounted in the workspace, featuring: - Swivel arm approx. 580 mm long for 3-sided machining - Endless swivel range of the A-axis - Counter bearing to support rotary table bridge UNIVERSAL CHIP CONVEYOR VC850 Spindle PREPARATION FOR HIGH PRESSURE for use with auxiliary tank up to 22 bar HIGH PRESSURE TANK 22 bar Additional air blast at spindle head Central compressed air through milling spindle (alternative to) Guodpfxjy S Tpis Aa Djd Coolant gun in working area PREPARATION FOR SPINNER STANDARD PROBE Wireless SPINDLE PROBE Universal robot interface UNIROB CLAMPING HYDRAULICS incl. 2 pcs. 4/4-way valve for hydraulic workpiece clamping up to 200 bar STANDARD DOCUMENTATION (GERMAN) Consists of machine manual and CNC manuals Supplied digitally on the control. Printed manuals available for an additional fee. LIFTING EYE BOLTS for crane unloading, set of 4 pcs, Strictly required for crane transport STANDARD PAINTING two-tone: light gray RAL7035 and blue gray RAL5008 Electrical configuration EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-wire) Notes: The price includes warranty services only within Germany. For new and demo machines, the photos shown may not be of the specific machine, but rather of similar models. Depicted accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed ex-works quotation. Visit our factory near Munich or one of our showrooms. We may also have other comparable machines available. Prior sale expressly reserved.

Kondisi: baik (bekas), Tahun pembuatan: 2023, spinner-tc600-1 Guodpfx Aasy Thmls Dod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 360 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 4, Mesin SPINNER TC800 110 SMCY 4-sumbu ini diproduksi pada tahun 2016. Mesin ini memiliki sumbu X dengan lintasan maksimal 360 mm dan sumbu Z dengan lintasan 900 mm, dilengkapi dengan spindle tandingan dan alat potong berputar. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan SPINNER TC800 110 SMCY mesin bubut horizontal yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Pengatur alat Spesifikasi Teknis Counter Spindle: Ya Gjdjy En Awepfx Aa Deud Driven Tools: Ya

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 2.660 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: SIEMENS, model controller: 840D, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 5, SPINNER U5-2520 5-sumbu ini diproduksi pada tahun 2016. Mesin ini memiliki panjang lintasan sumbu X yang mengesankan sebesar 2660 mm, sumbu Y 520 mm, dan sumbu Z 460 mm. Dilengkapi dengan kecepatan spindle 10.000 rpm dan penukar alat otomatis dengan 2x52 posisi. Jika Anda mencari opsi pengerjaan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal SPINNER U5-2520 yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. • Sumbu B: +110° / -90° Gusdpfxoy Efxie Aa Djd • ATC: 2 x 52 alat Spesifikasi Teknis: Ukuran tirus SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 25.585 h, kecepatan spindel (maks.): 7.000 rpm, produsen pengendali: FANUC, model controller: Series 31i-MODEL B, This SPINNER TTS 42 lathe was manufactured in 2020 in Germany and has 25,585 operating hours. It is equipped with a Fanuc Series 31i-MODEL B control. The machine features a spindle speed of 7,000 rpm. Further details can be found in the attached PDF with the technical specifications. Machine Advantages • Main spindle replaced in 2023 • Maintained internally • Operates with emulsion coolant • No fire extinguishing system installed Qualitative Advantages of the Machine • Unimag interface for bar feeder magazines • Parts conveyor belt Godpfx Aajyail Uj Deud • Spinner bar feeder, type Servo, made by Spinner, suitable for spindles with up to 42 mm bore, for material diameter 4–42 mm, length up to 3,200 mm • 10x external turning tool holders • 12x boring bar holders d=32 • 3x deep boring bar holders • 6x straight driven tool holders • 3x axial driven tool holders • Previously machined materials: aluminum, brass Technical Advantages of the Machine • Spindle 2 (sub-spindle) version up to 7,000 rpm – 42 mm • Turret 1: 12 positions, CNC servo-driven • Turret 2: 12 positions, CNC servo-driven • Turret 3: 12 positions, CNC servo-driven • Integrated ejector unit in the sub-spindle for ejecting parts into the collection tray • Signal light on top of the machine in three colors (red/yellow/green) for status indication • Chip conveyor with right-hand discharge, including integrated coolant tank and return pump • Additional coolant system with auxiliary tank, immersion pump 80 l / 4 bar, high-pressure pump up to 80 bar / 19.5 l/min • Rinsing gun in the working area • Holder for measuring probe on the machine bed, prepared for the use of a • Measuring probe for tool measurement, switchable in 3 axes • Extraction duct d=200 into the working area for connection to the extraction system

Kondisi: baik (bekas), Tahun pembuatan: 2015, Diameter pemesinan maksimum 460mm, swing 760mm, turret 12 stasiun, kontrol Fanuc 32i Model B, daya motor spindle 22/15kW, kapasitas batang diameter 66mm, kecepatan spindle 4.000rpm, chuck 3 rahang, konveyor serpihan, pendingin. Gsdpeyzz Hbofx Aa Doud

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, ein-cnc-vertikalbearbeitungszentrum-spinner-steht-zur-verfugung Gujdoy Igbqopfx Aa Dsd

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, The tool holder is brand new and still in its original packaging. There is also a second one available, which, although used, shows no signs of wear (see photo). Spindle MTSK-40 Transmission ratio: 1:1 Max RPM: 6000 Maximum torque [Nm]: 50 External coolant: Yes Internal coolant: Yes Internal coolant pressure: 30 BAR The holder can also be used for the following CMZ machines: CMZ - TA15M/Y/MS/MY/YS 15 ST. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 Guodsuzwutspfx Aa Djd CMZ - TA20M/Y/MS/MY/YS 15 ST. CMZ - TA25M/Y/MS/MY/YS 15 ST. CMZ - TA30M/Y/MS/MY/YS 15 ST. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 7.000 rpm, lubang spindel: 42 mm, model controller: Siemens 840 D - SL, kecepatan spindle sekunder (maksimal): 7.000 rpm, Perlengkapan: konveyor serpihan, TECHNICAL DETAILS Bar diameter: 42 mm Travel range X-axis 1/2/3: 180 mm Travel range Y-axis 1/3: ±45 mm Travel range Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Counter spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3x 12 pos Number of driven tool stations: 3x 12 pos Driven tool speed: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Guodjyxmnxopfx Aa Dod Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Space required: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Knoll chip conveyor High-pressure coolant (14 bar) Parts catcher Counter spindle Interface for bar feeder Bar feeder magazine: Spinner Barload BL 0146 C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool setting arm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 27.218 h, kecepatan spindel (maks.): 3.600 rpm, jarak pergerakan sumbu X: 210 mm, jarak gerak sumbu Z: 930 mm, berat keseluruhan: 2.300 kg, produsen pengendali: HEIDENHAIN, model controller: TNC 410/426, akurasi pemposisian: 0,003 mm, sudut putar poros C (maks.): 360 °, jumlah sumbu: 3, This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm and a Z-axis travel of 930 mm. The machine is equipped with a robust table measuring 520 x 900 mm and a load capacity of 400 kg. If you are looking for high-quality machining capabilities, consider the SPINNER MT 500/1000 AT currently offered for sale. Please contact us for further details. • Machine/Model: MT500-1000 • X-axis travel: 210 mm • Z-axis travel (Multifix holder + manual chuck): 930 mm • Z-axis travel (Multifix holder + hydraulic chuck): 930 mm • Z-axis travel (turret + manual chuck): 930 mm • Z-axis travel (turret + hydraulic chuck): 930 mm • C-axis travel: 360 degrees • Spindle bore 45 mm with hydraulic chuck: 3600 rpm • Spindle bore 57 mm with manual chuck: 3600 rpm • Tool system Haase quick-change holder: 1 tool station • Tool system turret VDI 30: 12 tool stations • Ball screw pitch X: 5 mm • Ball screw pitch Z: 10 mm • Rapid traverse X: 15,000 mm/min • Rapid traverse Z: 20,000 mm/min • Feed rate X + Z: 0-4000 mm/min • Feed force X-axis: 1382 daN • Feed force Z-axis: 609 daN • Pulling force hollow clamping cylinder: 145 daN/bar • Manual chuck Ø 200 mm: 3 jaws • Hydraulic chuck Ø 210 mm: 3 jaws • Coolant tank capacity: 75 l • Coolant pump flow: 30 l/min • Coolant pump pressure: 1.4 bar Gsdpsyxrndefx Aa Deud • Max. positioning deviation: 3 µm • Max. backlash: 2 µm • Positioning uncertainty: 2 µm • Max. roundness error on the workpiece:

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 12.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, torsi: 60 Nm, produsen pengendali: Siemens, model controller: 840D SL, tinggi total: 2.390 mm, panjang total: 2.515 mm, lebar total: 1.700 mm, beban meja: 200 kg, berat keseluruhan: 3.500 kg, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 30 h, jumlah slot dalam magazin alat: 24, panjang alat: 200 mm, diameter alat: 80 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Dijual mesin CNC Milling Spinner VC450 tahun 2014 dalam kondisi sangat terawat. Highlight: Mesin dilengkapi spindel baru dengan hanya sekitar 30 jam kerja spindel (tanpa crash), dipasang secara profesional oleh produsen Spinner – secara teknis dalam kondisi sangat baik. Bekas Telah diperiksa dan berfungsi penuh Ideal untuk pemesinan presisi – siap digunakan segera. ➡️ Tersedia tambahan: Gedjy Hf Nqjpfx Aa Deud Tersedia berbagai aksesori yang juga dapat dibeli, antara lain ragum mesin, dudukan alat SK40, dan peralatan lainnya. Inspeksi dan uji coba mesin dapat dilakukan sesuai kesepakatan. Jika berminat, silakan hubungi.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Heidenhain TNC 620 V2 control Gjdpsv Rr Hxofx Aa Doud Travel X/Y/Z: 760/480/480 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK40 taper Table size: 900x410 mm Chip conveyor Automation / Robot

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: ACO 122, Table clamping surface: 600 x 1300 mm Travel paths (X/Y/Z): 810/580/560 mm Spindle taper: SK 40 ISA Spindle speeds: 8,000 rpm Godsftt Sfspfx Aa Doud Number of tool stations: 40 slots Feed rates: 24,000 mm/min Spindle drive: 25 kW Electrical connection: 380/400 V, kW Space requirement: 3,200 x 2,500 x 2,900 mm Weight: 9,000 kg Control system: SIEMENS 810 DE

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AV0572, SPINNER TC800 with Travel Paths X=360mm Z=900mm 45-Degree Slant Bed Design with hardened and ground slideways WITH driven tools WITH Y-axis TOOL TURRET - WITH driven tool stations All tool positions can be powered using turret disks with a pitch circle or on the inner pitch circle Gusdsrbhd Nspfx Aa Djd Configured as a servo turret Tool Holder System at Turret: BMT65 Number of Tool Stations in Turret: 12 SPINDLE 1 Version up to 3,400 rpm - 85mm As integrated motor spindle, with water cooling using modern synchronous technology with hydraulic hollow clamping cylinder, bar capacity 85mm Speed range 0-3,400 rpm, Pmax 80 kW / 930 Nm Spindle nose DIN55026/A8 FOOT SWITCH TAILSTOCK can be dragged in the program by coupling with Z-axis, hydraulically clamped to the bed. With additional integrated hydraulic quill and support for fixed center. FOOT SWITCH DIRECT MEASURING SYSTEM in X-axis Control SIEMENS 840DE including: - SPINNER SPIOS 24" Touch operating panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for best ergonomics - incl. engraving cycles - 24" LCD flat color display with multi-touch functionality - User memory 2 GByte - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on the control panel for the following functions, integrated in one single control element: - Handwheel mode in jog operation - Feed override in automatic operation - Start button and feed override for single-block setup mode, auto-reset to 0% at end of block -> all key setup functions integrated into one control element - SHOPTURN - 4-axis machining with rotary axis - 3D SIMULATION of finished part - REMAINING MATERIAL DETECTION - DXF Reader CHIP CONVEYOR as hinged belt conveyor, discharge to the right, incl. integrated coolant tank and conveyor pump. HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER MEASURING PROBE for tool measurement in work area incl. quick-change coupling STANDARD DOCUMENTATION IN GERMAN consisting of machine manual and CNC manuals supplied in digital form inside the control system. STANDARD PAINT two-tone in light grey RAL7035 and blue-grey RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Line frequency 50Hz (+/-2%) TN system (5-wire) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images shown are not necessarily of the individual machine but of comparable models. Shown accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed quotation ex works. Visit our factory near Munich or one of our showrooms. We may have additional comparable machines on offer. Prior sale expressly reserved.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BV1420, SPINNER VC750 Machining Center Travel distances: X = 760 mm, Y = 460 mm, Z = 460 mm High-performance milling spindle up to 12,000 rpm Power: 11 kW (S6/40%) In-line spindle with direct drive, no belt Spindle tool holder: SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 24 tool stations Control system: SIEMENS 840DE, basic specification includes: - SPINNER SPIOS 24" touchscreen control panel for I4.0 applications - Height-adjustable, rotatable, and tiltable panel for optimal ergonomics - Incl. engraving cycles - 24" LCD flat color screen with multi-touch functionality - User memory: 2 GByte - 15 workpiece zero point offsets - 1 free USB interface - Ethernet interface as standard SPINNER MULTI-CONTROL WHEEL integrated into the control panel, combining the following functions in a single control element: - Handwheel function in jog mode - Feed override in automatic operation - Start button and feed control in single-block setup mode, automatically resetting to 0% at the end of the block -> All essential setup operations combined in one control element - SHOPMILL - 3D SIMULATION - REST MATERIAL DETECTION Godjrbgpijpfx Aa Djud UNIVERSAL CHIP CONVEYOR VC450/750 Discharges to the RIGHT of the machine With integrated coolant tank With conveyor pump Prepared spindle FOR HIGH PRESSURE, for use with an auxiliary tank up to 22 bar NOT included, but available optionally on request: - HIGH PRESSURE TANK 22 bar - PREPARATION FOR SPINNER STANDARD PROBE - Wireless SPINDLE PROBE STANDARD DOCUMENTATION in GERMAN Includes machine manual and CNC manuals delivered digitally on the control system. Paper manuals available at extra charge. LIFTING EYE BOLTS for crane unloading, set of 4 pcs Mandatory for crane transport STANDARD PAINT FINISH in two-tone: light grey RAL7035 and blue-grey RAL5008 Electrical specification to European standard as follows: Operating voltage: 3x400V +/-10% Mains frequency: 50Hz (+/-2%) TN network (5-wire) Notes: Price includes warranty services only within Germany. For new and demo machines, pictures shown may not be of the specific machine for sale, but of a comparable model. Accessories shown, such as fixtures or toolholders, are included only if listed in the technical description. Request a detailed ex-works offer. Visit our factory near Munich or one of our showrooms. We may have additional offers on comparable machines. Subject to prior sale.

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: VT0876, Fungsionalitas: berfungsi sepenuhnya, SPINNER VC1150 Travel Paths X1150, Y620, Z600 mm in the "Compact" execution version with an especially heavy-duty cross-slide design for high-performance machining featuring a patented guideway cover concept, which enables uniquely optimal chip removal and a compact footprint High-Performance MILLING SPINDLE up to 10,000 rpm with belt drive for exceptionally high torque (Mmax = 119 Nm, Pmax = 16 kW), suitable for universal machining applications in mechanical engineering Spindle tool holder SK40 DIN 69871 with pull studs DIN 69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations Control system: SIEMENS 840DE with the following standard features: - Height-adjustable and rotatable control panel for optimal ergonomics - 19” color flat LCD with multi-touch functionality - Incl. engraving cycles - 2 GByte user memory - 15 zero offset settings - 1 free USB interface - Standard Ethernet interface PORTABLE HANDWHEEL Gjdpfjxn R Daox Aa Djud SHOPMILL 3D SIMULATION of the finished part REMAINING MATERIAL DETECTION DXF Reader PROBING FUNCTIONS for probe integration UNIVERSAL CHIP CONVEYOR VC1150 SPINDLE PREPARATION FOR HIGH-PRESSURE use with auxiliary tank up to 22 bar Additional air blast at the spindle head PREPARATION FOR SPINNER STANDARD PROBE STANDARD DOCUMENTATION IN GERMAN Operating voltage: 3x400V +/-10% Mains frequency: 50Hz (+/-2%) TN electrical system (5-wire) PACKAGING Notes: The price includes warranty coverage only within Germany. For new and demo machines, the images shown are not necessarily of the individual machine but of comparable models. Depicted accessories such as clamping equipment or tool holders are only included if listed in the technical description. Please request a detailed ex-works offer. Visit our factory near Munich or one of our showrooms. We may have other comparable offers available. Prior sale expressly reserved.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, nomor mesin/kendaraan: VT0775, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, SPINNER VC1150 Travel paths: X1150, Y620, Z600 mm in the "Compact" configuration with an especially heavy-duty cross-slide design for high-performance machining featuring a patented guideway cover concept resulting in uniquely efficient chip evacuation and a minimal footprint High-performance MILLING SPINDLE up to 10,000 rpm with belt drive for particularly high torque Mmax=119Nm, Pmax=16KW ideal for a wide variety of machining tasks in mechanical engineering PRODUCTION PACKAGE VC1150-Compact INCREASED SPINDLE POWER from 16KW -> to 19KW (Pmax) INCREASED RAPID TRAVERSE Rapid traverse speed in X/Y/Z axes increased to 30 m/min Tool holder on spindle: SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axes Control system SIEMENS 840DE with the following basic features: - Height-adjustable and swivel-mounted control panel for optimal ergonomics - 19” flat-panel LCD screen with multi-touch functionality - includes engraving cycles - User memory 2 GB - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface SHOPMILL 3D SIMULATION of the finished part REMAINING MATERIAL DETECTION DXF Reader PROBING FUNCTIONS for integration of measurement probe SIGNAL LAMP on top of the machine UNIVERSAL CHIP CONVEYOR VC1150 Spindle PREPARED FOR HIGH PRESSURE for use with auxiliary tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper band filter for central flushing through the spindle Additional air blast at the spindle head Compressed air feed centrally through milling spindle Gjdpfx Aajvpf A Re Deud Rinsing gun in the work area PREPARATION FOR SPINNER STANDARD MEASUREMENT PROBE Wireless SPINDLE PROBE Electrical PREPARATION FOR EXHAUST SYSTEM for connecting a Spinner-recommended standard extraction unit STANDARD DOCUMENTATION IN GERMAN Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-wire) PACKAGING Notes: The price includes warranty services only within Germany. For new and demo machines, images shown are not necessarily of the actual machine, but of comparable models. Displayed accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed quotation ex works. Visit our facility near Munich or one of our showrooms. We may have other offers for comparable machines. Sale subject to prior sale.

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: VT0620, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 174 h, High-Performance Machining Center SPINNER VC850 Traverse paths X850, Y510, Z510 mm Advanced Configuration with patented guideway cover concept Base machine configured as VC850-5A Incl. rotary-swivel table, D=350 mm High-performance milling spindle up to 12,000 rpm Power output 22.6 kW / 108 Nm As built-in hybrid spindle with direct drive, beltless This results in an especially low machine height of only approx. 2,420 mm Tool interface at spindle SK40 DIN69871 Gedpfx Aew Auryja Dsud TOOL MAGAZINE with 48 tool stations MAGAZINE DOOR pneumatically actuated inside the work area DIRECT MEASURING SYSTEMS on X/Y/Z axes HEIDENHAIN TNC640 control, height-adjustable, with angle-adjustable keypad: - Contouring control with 19” multi-touch display, stainless steel design PORTABLE HANDWHEEL HR510 FS "Advanced Function Set 3" option no. 21 "CAD Import" option no. 42 "KinematicsOpt" option no. 48 "Advanced Function Set 1" option no. 8 "Advanced Function Set 2" option no. 9 "Touch probe functions" option no. 17 Energy-saving function incl. automatic machine shut-down TNC 620 / TNC 640 Heidenhain software option "Heidenhain DNC" option no. 18 Fully integrated 2-axis ROTARY-SWIVEL TABLE SPRT-350 centrally mounted in work area: - Rotary table with faceplate D=350 mm - Swivel range of A-axis: -110 / +46 deg - Additional clamping plate (approx. 200x350 mm) adjacent - Counter bearing to support rotary bridge - High-precision direct measuring systems centrally in both rotary axes - Hydraulic brakes on each axis, holding torque 3,600 Nm DUAL ROTARY UNION at center of C-axis UNIVERSAL CHIP CONVEYOR VC850 Discharge to the RIGHT of the machine SPINDLE PREPARATION FOR HIGH PRESSURE, compatible with aux. tank up to 70/80 bar HIGH PRESSURE TANK 70 bar with paper band filter for spindle-through flushing Blow air at spindle head Compressed air through milling spindle (central) Rinsing pistol SPINNER STANDARD PROBE preparation (Blum) Wireless SPINDLE PROBE Spinner-Blum with tool interface matching the milling spindle Electrical PREPARATION FOR EXTRACTION SYSTEM AUTOMATIC DOOR for working area Universal robot interface UNIROB I/O PACKAGE consisting of: 4 free M-functions with 2 PLC outputs I/O 24VDC 4 PLC inputs for feedback on the 4 M-functions Wired to terminal strip inside electrical enclosure STANDARD DOCUMENTATION 3D MODEL (CAM) LIFTING EYES for crane unloading STANDARD TWO-TONE PAINT in light grey RAL7035 and blue-grey RAL5008 Electrical configuration, EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Frequency 50Hz (+/-2%) TN system (5-wire) Notes: The price includes warranty services only within Germany. For new and demo machines, images shown may not represent the specific unit on offer, but similar machines. Accessories such as clamping devices or tool holders are included only insofar as listed in the technical description. Request a detailed ex-works quotation. Visit our factory near Munich or one of our showrooms. We may have additional comparable machines available. Prior sale expressly reserved.

Kondisi: bekas, Tahun pembuatan: 2005, Kapasitas Diameter pembubutan maks.: ≈ 300 sampai 400 mm Panjang pembubutan maks.: ≈ 600 sampai 1.000 mm Swing over bed: ≈ 500 mm Spindel Lubang spindle: ≈ 65 mm ← sesuai dengan nama UP65 Ukuran cekam: 200 sampai 250 mm Kecepatan spindle: ≈ 3.500 sampai 4.500 rpm Daya spindle: ≈ 15 sampai 22 kW Sumbu Pergerakan X: ≈ 200 sampai 250 mm Pergerakan Z: ≈ 600 sampai 1.000 mm Gujdpfx Aey Ewkqja Dod Gerak cepat: X: ~20 m/menit Z: ~24 m/menit Tailstock Tailstock hidrolik Diameter quill: ~80 mm Langkah quill: ~100 sampai 150 mm Berat mesin Sekitar 4.500 sampai 6.500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 410 mm, tinggi total: 2.500 mm, lebar total: 1.800 mm, beban meja: 250 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 5.000 g, panjang produk (maks.): 2.400 mm, This 3-axis SPINNER VC 560s was manufactured in 2007. It is a CNC milling machine with a 3-axis configuration, prepared for a 4th axis (included in the delivery, but not installed). The machine is operational and comes complete with all tools and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, you should take the opportunity to purchase this SPINNER VC 560 vertical machining center. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max. tool Ø 77 mm (125 mm with adjacent stations free); max. tool length 200 mm; tool change time 1.3 s • Coolant system: 250 l • Spindle hours: Unknown (reported as very low) Additional Equipment • New 4th axis (included, never installed, unused, still in box) • Complete tool set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Gujdpfx Aasykt T Do Dod Technical Specification Taper Size SK 40