Beli Stöcklin Efi 1350 bekas (1.032)

Kondisi: baru, Tahun pembuatan: 2024, en Nljdew Naanspfx Alkoa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 73.164 h, Data Umum Berat mesin: 19.400 kg Tinggi alat: 2.300 mm Dimensi Panjang mesin: 5.861 mm Unit Injeksi Nsdpex Nr Rtefx Alksla Diameter ulir: 60 mm Unit Penjepitan Gaya jepit: 2.600 kN Engel VICTORY 1350/260 tech ini diproduksi pada tahun 2012. Memiliki gaya penjepitan 260 ton, volume injeksi maksimum 735 cm³, dan diameter ulir 60 mm. Dimensi mesin: 5.861 × 1.923 × 2.300 mm, berat 19.400 kg. Saat ini masih beroperasi dalam kondisi sangat baik dengan 73.164 jam kerja. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Injection Moulding

Kondisi: baik (bekas), konfigurasi gandar: 3 gandar, pendaftaran pertama: 04/2016, panjang ruang muatan: 13.400 mm, lebar ruang muat: 2.500 mm, tinggi ruang muatan: 2.650 mm, panjang total: 14.040 mm, lebar total: 2.600 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 385/65R22.5, jarak roda: 8.770 mm, warna: putih, Tahun pembuatan: 2016,

Kondisi: bekas, Tahun pembuatan: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Features and technical specifications: - Including combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating structuring brush on the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece pass-through height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - With roller table at infeed - With separate additional structuring brush - With roller table at outfeed - With digital display device for the electric motor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm Njdpsw R Hh Uofx Alkola - Feed belt is functional; defective in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Photos show the machine in uninspected condition! Availability: short-term Location: Röllbach

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2017, panjang total: 13.430 mm, lebar total: 2.500 mm, tinggi total: 2.650 mm, ukuran ban: 385/65/22.5, warna: lain, Tahun pembuatan: 2017, Perlengkapan: ABS,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 3.551 h, lebar total: 1.790 mm, tinggi total: 2.150 mm, berat keseluruhan: 2.300 kg, panjang produk (maks.): 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt ejection system. The accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take advantage of this opportunity to purchase the Kundig Premium-2 1350-RG wide belt sander. Contact us for more information about this machine. Additional Equipment • Steel roller • Rubber roller with device for a needle roller (unused) • Belt release system Nljdpfx Alex D E I Esksa Machine Advantages Technical advantages of the machine • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Max. current consumption RP/RE: 36 A • Max. current consumption RE-L: 56 A • Required minimum fuse slow-blow RP/RE: 40 A • Required minimum fuse slow-blow RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Proper cable dimension cross-section RP/RE: 5x6 mm² • Proper cable dimension cross-section RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt air-blow diameter RE-L: 150 mm • Required total diameter of extraction connection RP/RE: 200 mm • Required total diameter of extraction connection RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for extraction RE-L: 5400 m³/h • Vacuum RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for blowing off belt or workpieces per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Max. workpiece width RP/RE: 1350 mm • Min. workpiece thickness RP/RE: 4 mm • Max. workpiece pass-through height RP/RE: 200 mm • Working height incl. machine base RP/RE: 910 mm • Feed speed range RP/RE: 3-15 m/min • Overall machine length RP/RE: 1690 mm • Overall machine length RE-L: 1850 mm • Overall machine width RP/RE: 1790 mm • Machine height incl. base and extraction nozzle RP/RE: 1950 mm • Max. machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Additional information Machine still connected to power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 750 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 426 M, tinggi total: 3.150 mm, berat keseluruhan: 10.100 kg, kecepatan spindel (maks.): 24.000 rpm, berat alat: 8.000 g, jumlah sumbu: 3, This 3-axis MIKRON VCP 1350 was manufactured in 2000. It features a Heidenhain TNC 426 M control unit, with an X-axis travel of 1350 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 750 mm. The machine supports a maximum workpiece weight of 1,800 kg and is equipped with a Step-Tec HSK-A63 high-speed spindle with 24,000 rpm. Ideally suited for precision machining, it offers a tool magazine capacity of 46 tools. Contact us for more information about this machine. Additional Equipment • High-speed precision machining Machine Advantages Technical Advantages • Equipped with automatic spindle orientation and high-speed spindle (24,000 rpm) • Coolant pressure: 30 bar (standard) / 40 bar (optional high pressure) • Tank capacity: 180 l (optional 600 l) • Direct drive AC motor • Measuring system: direct linear scales on all axes • Clamping surface: 1425 x 860 mm • Magazine capacity: 46 tools (standard), 92 tools (optional) • Max. magazine load: 200 kg • Tool-to-tool changeover time: approx. 12 seconds • Available for inspection Additional Information Machine still under power Nlodpfxjyarz Eo Alkoa Dimensions Machine Depth 4130 mm

Kondisi: bekas, Tahun pembuatan: 1983, Used machine Year of manufacture: 1983 Condition: fully inspected and serviced, including new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - Height-adjustable contact roller for calibration Nlodpowka T Sefx Alksa - Air-cushion pressure shoe controlled by the workpiece - 4-position adjustable grit compensation - Pneumatic belt tensioning device - Rotating cleaning brush at the machine's outlet side - Belt oscillation via light barrier for automatic monitoring and control of the lateral belt position to ensure even belt wear - Infeed roller table - Digital display for the electronically powered workpiece thickness adjustment - Additional veneer sanding pad - 2x spare sanding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece passage height: 150 mm - Main motor: 15 kW - Continuously variable feed speed: 2.5 – 12.5 m/min - Extraction outlets: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Photos show the machine in its current, unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, LINI KALIBRASI ATAS / BAWAH DMC MOD. UNISAND 2000–1350 – SESUAI STANDAR CE Mesin bawah: - Depresor untuk pengangkatan karpet - 2 sabuk bawah - Rol baja - Rol karet - Sikat - Perangkat on/off - Blower - Sepatu - Lebar kerja 1350 mm - Tahun 2000 Nledsywgqkspfx Alkea - Dilengkapi dengan manual dan deklarasi CE Mesin atas: - 3 sabuk atas - Rol baja - Rol karet - Pad - Sikat - Perangkat on/off - Blower - Sepatu - Depresor - Tahun 2000

Kondisi: bekas, BIESSE SAND REGAL 1350 adalah wide belt sander industri yang dirancang untuk kalibrasi dan pengamplasan halus panel dalam produksi furnitur dan papan. Seri REGAL menawarkan solusi produksi yang kokoh dan cocok untuk volume produksi menengah hingga tinggi. Mesin ini dirancang secara modular dan memungkinkan kombinasi operasi kalibrasi dan finishing dalam satu proses berjalan, yang secara signifikan meningkatkan produktivitas produksi. Nlsdeynb Rfspfx Alksa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, I am selling a COSTA K CCC 1350 wide belt sander, year of manufacture 2004. Configuration: - 55 kW steel calibration roller Nlodpfx Aljt Rn E Tokoa - 45 kW hard rubber sanding roller - 37 kW soft rubber sanding roller - Cleaning unit with combined brush and air jet at the rear - Working width: 1350 mm - Pressure steel guides for short elements - Compressed air cleaning for all units Equipped with 3 motors (55 + 45 + 37 kW) Complete documentation included. Condition: very good! Available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Translation: Travel paths: 1350 x 900 x 750 mm Machine control: Heidenhain TNC 426 Equipment: 46-position tool changer, SK 40 milling spindle, 12,000 rpm, Nlsdpfei El Iasx Alksa including coolant through spindle (IKZ system) and chip conveyor Glass scales, 3D probe: Renishaw MP12 Extensive accessories available upon request! Please contact us if interested!

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces Nedpek Dpp Sofx Alkola - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 14.500 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 60 mm, volume langkah: 735 cm³, tekanan injeksi: 1.481 batang, berat injeksi: 662 g, tinggi cetakan (min.): 250 mm, lintasan ejektor: 250 mm, panjang pelat: 650 mm, lebar pelat: 1.050 mm, tinggi pemasangan: 850 mm, Mesin dalam kondisi siap operasi. Termasuk robot penanganan dari ENGEL. Nlodpfx Aloyuayreksa

Kondisi: bekas, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precision-machined on all sides The granite plate comes from a coordinate measuring machine Dimensions of the large table surface (L x W x H): 1350 x 1000 x 300 mm Dimensions of the small table surface (L x W x H): 1350 x 300 x 245 mm - 5 support blocks with leveling screws, approx. 400 mm Nedpfxjh Uhq Ds Alkjla - 8 threaded inserts M10 in the tabletop (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded inserts M16 - small chip on one plate edge Overall dimensions (L x W x H): 1350 x 1350 x 300 mm Net weight of measuring plate: 1500 kg Net weight of granite feet: 100 kg Very good condition

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Baujahr: 2008 Steuerung: Fanuc Maximale Drehlänge: 650 mm Maximaler Drehdurchmesser: 350 mm Spindelbohrung: 42 mm Maximale Spindeldrehzahl: 3.500 1/min Länge: 2.400 mm Breite: 1.700 mm Höhe: 1.500 mm Gewicht: 1.800 kg Zubehör/Optionen: 3-Backenfutter zahlreiche Backen Spannzangenfutter Spannzangen Lünette Planscheibe Nlodpfxjv Tpans Alksa Werkzeughalter Typ Parat Unter Strom in unserem Lager.

Kondisi: bekas, Tahun pembuatan: 2005, nomor mesin/kendaraan: A41213AC1, de-to-multilang-001 Njdex Ex Tmspfx Alkola

Tahun pembuatan: 2026, Kondisi: baru, Instantaneous water heater with tube heat exchanger directly in the boiler water * Compact design and low weight * Energy savings up to 10%! * Low maintenance * Easy cleaning * Excellent price/performance ratio * Available with oil or gas burner Technical data: * Boiler output: 100 kW * Hourly output up to 1,350 liters (10-78 °C) Nsdet Hfygspfx Alkjla * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK – Pasteurisation systems for over 30 years Proven technology – over 500 units in customer use

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, nomor mesin/kendaraan: 2475958, daya: 56 kW (76,14 hp), kapasitas angkut: 450 kg, tinggi angkat: 41.150 mm, panjang platform: 2.440 mm, lebar platform: 910 mm, berat keseluruhan: 20.400 kg, panjang transportasi: 11.860 mm, lebar transportasi: 2.490 mm, tinggi transportasi: 3.050 mm, jenis bahan bakar: diesel, ukuran ban: 445/50D710, warna: oranye, Perlengkapan: Pemeriksaan keselamatan UVV, kunci diferensial, penggerak semua roda, Data Teknis Tahun Pembuatan 2012 Ketinggian kerja 43,30 m Tinggi platform 41,30 m Jangkauan samping 24,38 m Rotasi 360° Kapasitas angkut 450 kg Nlsdpfx Asyqywcslkoa Panjang lengan keranjang 2,44 m Ukuran platform (P x L) 0,91 m x 2,44 m Dimensi total (P x L x T) 11,86 m x 2,49 m x 3,05 m Kemampuan tanjak 45% Kecepatan berkendara 5,2 km/jam Berat 20.400 kg Berfungsi penuh, kondisi pemakaian umum, UVV berlaku

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: X1T126, lubang spindel: 42 mm, panjang pembubutan: 650 mm, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 3.500 rpm, produsen pengendali: Fanuc, RINCIAN TEKNIS Panjang putar maks.: 650 mm Diameter putar maks.: 350 mm Nledoyg Hvwopfx Alkea Lubang spindle: 42 mm Kecepatan putar spindle maks.: 3.500 rpm RINCIAN MESIN Kontrol: Fanuc Dimensi & Berat Dimensi (P x L x T): 2.400 x 1.700 x 1.500 mm Berat: 1.800 kg PERLENGKAPAN Chuck rahang 3 Banyak rahang cadangan Chuck collet Collet Dudukan tetap (steady rest) Piringan muka Pemegang alat Parat

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kalibrierschleifmaschine modell DMC TECHNOSAND TC 1350 RRP Gebrauchtmaschine CE-Norm: Ja Maschine bestehend aus 3 Bändern (3 unabhängige Motoren) 1. Band: Kalibrierwalze 2. Band: Schleifwalze Nlsdpsyrrr Uofx Alkja 3. Band: Elektronisch segmentierter Schleifteller Vakuumtisch mit Vakuumeinheit Maximale Arbeitsbreite mm. 1350 Spannung: Volt 380 / 50

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A11108GM1, Wide-Belt Sander Costa K6 CCC 1350 Year of manufacture: 2001 Technical condition: very good, after a complete overhaul at COSTA in 2023 The Costa K6 CCC 1350 wide-belt sander from 2001 is a robust industrial machine designed for sanding and calibration of wooden surfaces. This machine features a fixed table and a movable working section with rollers. Constant working height: 890 mm, allowing installation in a production line. Additionally, the machine is equipped with a vacuum table powered by its own fan. Nedpfx Aswczkielksla Key technical specifications: - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration roller, 2x rubber roller) - Cleaning or sanding brush - Sanding belt length: 3250 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, Vutek GS 5000R Tahun pembuatan: akhir 2013 (produksi mulai 2014) kilometer sangat rendah hanya 30.000 m2 per tahun (tanpa mesh) Warna: 8C + Putih (cocok untuk backlit) semua opsi tersedia Lebar cetak: 3*1,6m - 3,2m - 5m * dengan garansi 3 bulan Pengiriman: kami bisa Instalasi: kami bisa Pelatihan: kami bisa Layanan: kami bisa Suku cadang: kami bisa Nlodjym U Dcspfx Alkoa

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm Nljdox Rdn Topfx Alkoa 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear brake unit, automatic belt length adjustment Dust extraction system controlled according to workpiece presence, counter-rotating sanding belt, abrasive belt grain compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. continuously adjustable sanding speed via electronic frequency inverter, double purge opening connection for dust extraction device. Anti-wear brake unit, automatic adjustment of differing belt edge lengths, dust extraction system controlled according to workpiece presence, disconnectable, counter-rotating sanding belt. 2 pressure beams with selectively adjustable pressure system - CSD® system Continuously adjustable pressure of individual pressure elements for single and multiple feed. Spacing: 32 mm. Workpiece tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width, as well as the start and end of sanding on the pressure beam, are electronically adjustable. The pressure elements are activated by electromagnetic lifters capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology always ensures proportionally equal pressure in relation to pad overlapping on the workpiece. The risk of edge-through sanding is virtually eliminated by this continuous, dynamic control of pressure force.

Kondisi: bekas, Schulz roller curve conveyor, right-hand with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Usable width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inside radius (IR): 795 mm Straight section: Conveying length (FL): 1350 mm Usable width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v = 0.3 m/sec. Drive: round belt running through curve and straight section Scope of delivery: including double-sided side guide, without supports (available on request) Optional accessories: 2 double supports Height-adjustable roller top edge +/-100 mm Frequency inverter for stepless speed adjustment Nsdpsk Aa Ipsfx Alkela Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, professional advice please feel free to contact us. Simply call or email us. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics