Beli Stacker Las 1600 Hidrolik bekas (15.646)

Tahun pembuatan: 2023, Kondisi: bekas, spz-400v-36kw-3200kg Nsdjy Hl Nqepfx Aaajwf

Kondisi: bekas, Pabrikan: ENDI Engineering Kft Tipe: LBS-20 Tahun pembuatan: 2004 Tekanan kerja: 200 bar Tegangan: 380 V Daya listrik: 1,5 kW Berat: 378 kg Njdpfxsy E Twaj Aaaswf

Kondisi: bekas, Tahun pembuatan: 2013, dk3pqn93 Nsdpfxey Hl Iaj Aaaswf

Tahun pembuatan: 2006, Kondisi: bekas, Cross Stacker Gaemmerler KL 540 with Integrated Blocker VM 500 The KL 540 Cross Stacker operates using the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and ready for operation Nwedpfx Aash Nrh Ujaof Technical Data: Cycle Time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo ejector (depending on product) Number of Pages: 4 – 96 (heatset / gravure) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal ejector) B: 140 – 500 mm D: max. 560 mm Layer Height: max. 200 mm Stack Height: max. 300 mm Weight: approx. 1,500 kg Blocker Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and a blocking time of 2 sec. The cycle time per package increases if the blocking time is increased or the package height is reduced. The cycle time is also heavily influenced by the ejection speed of the cross stacker and therefore by the product (surface, format). Formats: Width: 140 to 500 mm / 5.5" to 19.7" Length: 105 to 330 mm / 4.13" to 13" Stack Height: 55 to 400 mm / 2.16" to 15.7" Infeed Height: 890 mm / 35" Outfeed Height: 890 mm / 35" Connection Load: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air Requirement: 1000 Nl/min, 6 bar; non-lubricated, dry air Weight: approx. 500 kg

Kondisi: bekas, Tahun pembuatan: 2014, Installed in 2015 Nwodpfjxb U Ayox Aaasf Approx. 97 million impressions Format: 94 x 64 cm (37 x 25 inch) Technical Specifications: - PQC-S control console with touchscreen - KOMORI KHS-AI system for setup time optimization - KOMORI Smart Feedback for density adjustment and waste reduction - Automatic washing and ink presetting - KOMORI PSP automatic format and substrate thickness adjustment - AMR (Automatic Make Ready) for pre-set job changeover - Quick start function for production - Remote control for register and transfer cylinder adjustment - Automatic sheet size adjustment - Pneumatic side lay fingers - Mechanical and ultrasonic double sheet detection at the feeder - S-APC: semi-automatic plate change (no plate bending required) - KOMORI DSC high-performance sheet guide with exclusively double-diameter impression and transfer cylinders - KOMORImatic dampening system - technotrans alpha.c dampening solution supply - Antistatic blower at the feeder head - Side air blowers (feeder) - 2-zone suction belt feed table - Delivery with sheet jogger/smoother - Sheet brake with infinitely adjustable speed - Air blow bars above the delivery pile - Antistatic bar above the delivery pile - Adjustable fans for precise paper travel and pile formation - Weko AP160 powder sprayer - KOMORI PDC LII, online density measurement - KOMORI PCC CIP3/4 data conversion software Max. sheet size: 640 × 940 mm Min. sheet size: 297 × 420 mm Max. print size: 620 × 930 mm Plate size: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04 – 0.6 mm Gripper margin: 10 mm Plate clamp margin: 45 mm Max. printing speed: 13,000 sheets/hour Feeder pile height: 800 mm Delivery pile height: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Kondisi: bekas, Tahun pembuatan: 2003, Tinggi kerja 2300 mm, lebar kerja 3500 mm, motor 1,5 kW. 3 silinder penekan dari atas, 2 dari samping. Tekanan silinder per silinder: 3000 kg. Langkah silinder tekan hingga 200 mm. Hidrolik: 10-150 bar. Kebutuhan ruang: 3950 x 900 x 2550 mm. Berat: 670 kg. Lokasi penyimpanan: Nattheim. Nwsdpfsvvkmbjx Aaajf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, jam operasional: 38.800 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 1.600 mm, jumlah sumbu: 3, Pusat pemesinan universal 3-sumbu MAHO 1600S ini diproduksi pada tahun 1989. Mesin ini memiliki sekitar 38.800 jam kerja dan beroperasi tanpa masalah berarti hingga tahun 2025. Mesin dilengkapi sistem pendingin yang berfungsi dengan baik dan disertakan dengan manual serta dokumentasi yang tersedia. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan mesin MAHO 1600S yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. • Jam kerja mesin: sekitar 38.800 jam • Tahun operasi terakhir: 2025 • Kondisi: Beroperasi tanpa masalah berarti hingga 2025 • Dokumentasi: Manual dan dokumentasi tersedia • Sistem pendingin: Ada dan berfungsi Nwedpfxoy Hizws Aaasf

Kondisi: baik (bekas), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Nwsdpey Hfwnefx Aaasf Welding Range 3~ 400 V: [A] 30 - 400 Voltage Range: [V] 15.5 - 34 Weldable Wires - Steel: [Ø in mm] 0.6 - 1.6 Weldable Wires - Stainless Steel: [Ø in mm] 0.8 - 1.2 Weldable Wires - Aluminium: [Ø in mm] 1 - 1.6 Weldable Wires - CuSi: [Ø in mm] 0.8 - 1.2 Voltage Adjustment: Stepless MIG-MAG Duty Cycle: Duty Cycle 100% (40°C): [A] 300 Duty Cycle 60% (40°C): [A] 370 Duty Cycle at max. welding current (40°C): [%] 45 Manual Electrode Welding: Welding Current Range 400 V: [A] 10 - 400 Voltage Range: [V] 20.4 - 36 Weldable Electrodes: [Ø in mm] 1.5 - 8 Electrode Duty Cycle: Duty Cycle 100% (40°C): [A] 290 Duty Cycle 60%: [A] 370 Duty Cycle at max. welding current (40°C): [%] 45 General Specifications: Open Circuit Voltage: [V] 76 - 83 Standard Wire Feed Speed: [m/min] 1 - 25 Mains Voltage: 400 V Mains Supply 3~ (50/60 Hz): [V] 400 Mains Fuse 3~ (50/60 Hz): [A] 32 Positive Mains Tolerance 3~ (50/60 Hz): [%] 15 Negative Mains Tolerance 3~ (50/60 Hz): [%] 15 Plug: CEE 32 Standards and Approvals: Protection Class: IP32S Insulation Class: F Standard: EN 60974-01 Certification: CE, S Cooling: Cooling Type: Gas-cooled, Water-cooled Cooling Performance (l/min): [kW] 1.06 Tank Capacity: [l] 4.3 Dimensions (L x W x H): [mm] 880 × 490 × 885 Case Dimensions (L x W x H): [mm] 575 × 245 × 434 Weight: [kg] 61

Kondisi: baik (bekas), Berbagai meja las Demmler 1500 x 2500, 1500 x 1000, 1500 x 3000, 1500 x 2000 juga dapat dijual secara terpisah dengan banyak aksesori. Nwjdpfx Aoy Hf Ndeaaef

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), Mesin Las Titik Tipe KAP10 Bersertifikat CE Pengoperasian: Pedestal Daya pada 50% ED: 10kVA, Daya kontinu: 7,1kVA Kapasitas Pengelasan: Plat baja 1,5+1,5mm Konstruksi Transformator: -Gulungan primer: Kawat tembaga -Gulungan sekunder: Lembaran foil tembaga fleksibel -Inti: Inti EI baja silikon Koneksi Listrik: 220V/400V (50Hz) Fuse Proteksi: 220V-40A / 380V-25A Tingkat Daya: 5 Panjang lengan: 500mm Diameter lengan: 40mm Elektroda: Langkah elektroda dapat disesuaikan Nwsdpfx Aajkwcbyeajf Kabel Input Daya: 3m Kelas Proteksi: IP21 Kebutuhan Ruang (L/P/T): 380mm x 1000mm x 1050mm Berat: 110Kg Garansi: 1 tahun (+10 tahun dukungan suku cadang)

Kondisi: baru, Tahun pembuatan: 2026, Spesifikasi Teknis: Model: KEP40 Pengoperasian: Manual Daya: 40KVA Kapasitas Pengelasan: 1+1 mm baja ringan Level Daya: %0-100, dapat diatur melalui mikrokontroler digital Waktu Las: 1-99 Siklus (20ms - 2s), dapat diatur melalui mikrokontroler digital Tegangan Masuk: 380V/50Hz Sekering Pelindung: 63A Panjang Kabel Lengan Pistol Fleksibel: 250cm Panjang Kabel Sasis Fleksibel: 100cm Kabel Daya Masuk: 3m Nodoy Dildspfx Aaaowf Kelas Perlindungan: IP21 Dimensi (L/P/T): 530mm x 430mm x 610mm Berat: 116kg

Kondisi: baru, Tahun pembuatan: 2024, 7305 Nodpfxowiry Ie Aaaewf

Kondisi: baru, Tahun pembuatan: 2025, HYDRAULISCHES PORTAL-RICHTSYSTEM MODELL HSPS400 / 400 TONNEN Hubzylinder-Kapazität (Tonnen): 400 Tonnen bei 250 Bar Min. Arbeitsdruck (Bar): 30 Bar Max. Arbeitsdruck (Bar): 250 Bar (25 MPa) Zylinderdurchmesser: Ø450 mm * 1 Stk Hub (mm): 1000 mm Lichte Weite (mm): 1300 mm Tischgröße (mm): 6000 x 3100 mm Verfahrweg (mm): 4700 x 2600 mm Vorschubgeschwindigkeit (mm/s): 7 mm/s Rücklaufgeschwindigkeit (mm/s): 14 mm/s Arbeitsgeschwindigkeit (mm/s): 3–7 mm/s Motor (kW): 25,1 kW Pumpe (Liter): 45 ccm BOSCH Rexroth Nwedpfx Aaowbtlvjajf Gesamtmaße (LxBxH): 5500 x 7000 x 4200 mm Gewicht (kg): ca. 45.000 kg

Kondisi: baru, Tahun pembuatan: 2025, C-FRAME EINSTUFIGE HYDRAULIKPRESSE MODELL CFSS100 / 100 TONNEN Stößelzylinder-Kapazität (Tonnen): 100 t / 250 bar Min. Arbeitsdruck: 30 bar Max. Arbeitsdruck: 250 bar Hauptzylinderdurchmesser: Ø220 mm * 1 Stk Hilfszylinderdurchmesser: Ø50*35 mm * 2 Stk Tischgröße (mm): 800 x 500 mm Hub (mm): 400 mm Lichte Weite (mm): 500 mm Nwjdpfx Aajwbtihoajf Eilgang (mm/s): 110 mm/s Rücklaufgeschwindigkeit (mm/s): 160 mm/s Arbeitshubgeschwindigkeit (mm/s): 10 mm/s Motor (kW): 11 kW Pumpe (Liter): 26 l / 19 ccm Gesamtmaße (LxBxH): 1900 x 1700 x 2930 mm Gewicht (kg): 5.500 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 1.110 h, kapasitas angkut: 1.400 kg, tinggi angkat: 3.250 mm, pengangkatan bebas: 76 mm, jenis bahan bakar: listrik, tipe tiang: simpleks, tinggi konstruksi: 2.170 mm, panjang garpu: 1.150 mm, berat kosong: 1.200 kg, panjang total: 760 mm, jenis penggerak: Elektro, lebar konstruksi: 770 mm, en-1 Nedpst Expfsfx Aaajwf

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 780 h, kapasitas angkut: 1.400 kg, tinggi angkat: 3.250 mm, pengangkatan bebas: 76 mm, jenis bahan bakar: listrik, tipe tiang: simpleks, tinggi konstruksi: 2.170 mm, panjang garpu: 1.150 mm, berat kosong: 1.200 kg, panjang total: 760 mm, jenis penggerak: Elektro, lebar konstruksi: 770 mm, en-1 Nsdsvlmdnspfx Aaaewf

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 930 h, kapasitas angkut: 1.400 kg, tinggi angkat: 3.250 mm, pengangkatan bebas: 76 mm, jenis bahan bakar: listrik, tipe tiang: simpleks, tinggi konstruksi: 2.170 mm, panjang garpu: 1.150 mm, berat kosong: 1.200 kg, panjang total: 760 mm, jenis penggerak: Elektro, lebar konstruksi: 770 mm, en-1 Njdpfx Aasvlmdhoaswf

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 330 h, kapasitas angkut: 2.000 kg, tinggi angkat: 1.600 mm, pengangkatan bebas: 172 mm, jenis bahan bakar: listrik, tipe tiang: simpleks, tinggi konstruksi: 1.335 mm, panjang garpu: 1.200 mm, berat kosong: 1.350 kg, panjang total: 1.600 mm, jenis penggerak: Elektro, lebar konstruksi: 790 mm, Electric High Lift Stacker Load Centre: 600 mm Mast Type: Standard Technical Condition: Very good Front Tyres Type: Polyurethane Front Tyres Condition: 100% Rear Tyres Type: Polyurethane Rear Tyres Condition: 100% Battery Voltage: 24V Battery Capacity: 300Ah Nwjdpfx Aasqynq Reasf Battery Year: 2022 Description: Factory-refurbished used device from Toyota including new inspection and new certification according to FEM (formerly UVV). Equipped with power steering. Impulse control, initial lift, CE certificate,

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, PRESS ELEKTRO-HIDROLIK SILINDER BERGERAK AXA. Nwsdpfjlruhdjx Aaaof Kapasitas 150 ton. Kecepatan ganda otomatis dengan mode cepat. Panel listrik khusus dengan saklar cepat/lambat untuk pengoperasian satu tangan. Silinder bergerak dengan langkah melintang 816 mm. Jarak bagian dalam dari ujung ke ujung: 1500 mm. Langkah batang: 300 mm. Distributor GALTECH. • Blok 2MP. • 2 Unit Pompa roda gigi eksternal satu arah VIVOIL: satu untuk pendekatan dan pengembalian cepat (set ke 20 bar) dan satu dengan tekanan yang dapat diatur menggunakan kenop tangan untuk pengaturan daya yang diinginkan. • Katup pengaman dengan pengunci mekanis untuk mencegah tekanan berlebih. • Manometer standar untuk menampilkan daya yang dihasilkan. • Panel listrik INTECH bersertifikat sesuai standar yang berlaku dan dengan penandaan CE mandiri.

Kondisi: baru, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €171,300 Leasing rate: €3,237.57 Pressing force: 400 t Bending length: 4,050 mm Axes: Y1 / Y2 / X axis Stroke: 365 mm Distance between uprights: 3,400 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 1,050 mm Table width: 154 mm Oil tank: 250 l Motor power: 37 kW Length: 5,750 mm Width: 2,110 mm Height: 3,640 mm Weight: 27,760 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic calculation of bending sequence - Automatic calculation of the developed length for sheet metal blanks - Graphical product and tool memory - Correction function available - USB ports for backup and program transfer - PC software for creating programs on a PC and transferring to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, sectional and gooseneck 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH BENEFITS OF THE AD-S SERIES: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double instead of single linear guidance - More options available such as: additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem setup, different CNC controls, etc. PRICE FCA TURKEY OPTIONS: R-axis R/Z1/Z2-axis Njdpfxswirfks Aaaewf DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Kondisi: baru, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €88,113 Leasing rate: €1,665.34 Press force: 220 tons Bending length: 3,050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 140 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Nwodewiqudopfx Aaajf Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 22 kW Length: 4,250 mm Width: 1,770 mm Height: 3,000 mm Weight: 12,600 kg Standard equipment: - 3 axes (Y1, Y2, X) - CNC control DT-15 - 2D graphic display 15” - Intuitive touchscreen operation (easy drawing of bending contours with your finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of the developed length for sheet metal blank - Graphical product and tool storage - Correction capability - USB ports for backup and program transfer - PC software so programs can be written on a PC and then transferred to the machine via USB - Servo-driven backgauge on linear guides and ball screws - Backgauge finger blocks on double linear guides - CNC controlled crowning - Upper tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35 and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - CE-compliant equipment - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double, instead of single, linear guides - More options available, e.g. additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem design, other CNC controls, etc. OPTIONS: - R-axis - R/Z1/Z2 axes - CNC control Delem DA66 S - CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability - Hydraulic or pneumatic tool clamping for Euro or Wila tooling

Kondisi: baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, Diameter putar di atas tempat tidur: 1.650 mm Diameter putar di atas tumpuan: 1.350 mm Nwodpjy E Nwcefx Aaaof Panjang benda kerja yang dapat diputar: 10.000 mm Lebar tempat tidur: 1.120 mm Rentang kecepatan putar: 1,4 - 280 rpm Torsi maksimum, kira-kira: 20.000 Nm Berat benda kerja antara senter, maks.: 10.000 kg dengan 1 steady rest: 12.500 kg Perlengkapan Layar digital 3-sumbu: ACU RITE 1 buah steady rest 1 buah dudukan rol Konveyor serbuk KABELSCHLEPP Pelindung chuck

Kondisi: baik (bekas), Tahun pembuatan: 2000, 4-way flat bed (the 2 outer ways for Z-slide; 2 inner ways for tailstock) with movable Z-slide on the outer 2 guides; spacing: 1160 mm on the inner guides for the tailstock, 700 mm. Bed length: mm 5300 Centre distance (turning length between chuck height and centres): mm 3000 Centre height: mm 800 Swing over bed: mm 1600 Swing over cross slide (between centres): mm 1400 Swing over slide: mm 1200 Bed width, outer guide: mm 1160 Tailstock guide width (center): mm 700 Welded bed; stress-relieved using WIAP substitute annealing process and vibration-damped according to patent WIAP® VDSF® (Pat. No. 68433; App. 4230130.30; PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Guideways ground; guides replaceable without dismantling the bed 1.2 Headstock / Main Drive – fixed Number of headstocks: pcs. 1 Spindle measuring system: digital / linear Axis position monitoring: none (rotary axis) Spindle bore: mm 112 Spindle nose: A15 DIN 55021 Main spindle motor: 100% duty cycle (kW) 46, (Nm) 305 Motor: 1PH7184 2NE Power section: 6SN112-1AA00-0FA Three-stage gearbox mounted behind the headstock Programmable automatic gearbox via M-function Gear range 1: RPM 5.6–120 Gear range 2: RPM 16–360 Gear range 3: RPM 45–800 Torque stage 1 (100%): Nm 15,236 Torque stage 2 (100%): Nm 5,290 Torque stage 3 (100%): Nm 1,904 Max spindle speed: RPM 800 1.3 Longitudinal and cross slide Qty.: 1 Quantity cross slides: pcs. 1 Quantity longitudinal slides: digital / linear Axis measurement system on motor: Balluf Axis position monitoring (3-way switching package) RPM: 2000 Axis drive Z-feed motor 27 Nm, mm 1005 2 X slides independently movable, max internal spacing Via M-function, X-slide 1 can be coupled (4-way turret), X-slide 2 with powered turret Feed force: kN 27 Max feed / rapid traverse Z: mm 6000 Feed type: backlash-free ball screw Z-axis travel: mm 3020 Rapid traverse Z-axis: m/min 6* (designed for 10 m/min) RPM: 2000 Nsdpfx Aod D Nxkeaaswf Axis drive X-feed motor 1FT5076 18/22 Nm Feed force: kN 15 Max feed / rapid traverse X: mm 6000 Feed type: backlash-free ball screw X-axis travel: mm 850 Rapid traverse X-axis: m/min 10 1.3a Tailstock Manually adjustable; air-assisted for easy movement Vibration-damped with taper for tailstock quill Quill diameter: mm 200 Quill stroke: mm 200 Auxiliary towing device with the Z-slide available Clamping with nut & lever / ring nut with various threads around the circumference; repositionable 1.4 Guides All guides are glued onto ground surfaces Dimensions: mm 90 x 50 Steel guide hardness approx.: HRc 55–60 Counter-guides: plastic-coated Automatic central lubrication with electric monitoring Heavy units are air-assisted with the WIAP® Press-Air process for smooth motion and contamination protection 1.5 Tool turret with driven tools Baruffaldi tool turret TOER 320 Type: K18.0320.12041.B No. of positions: 8 Cylinder shank diameter: VDI 60 Turret disc outside diameter: mm 570 Turret disc diameter VDI 60: mm 476 Disc thickness: mm 95 Driven tools: pcs. 4

Tahun pembuatan: 2011, Kondisi: bekas, Cocok untuk penyikatan otomatis (pembulatan tepi atau penghilang gerinda) pada gigi mata gergaji bundar HM. Aksesori: Penjepit mata gergaji, Pengaturan kecepatan variabel untuk penggerak mata gergaji, Nwodpfx Aaou Dk Edoaef Timer yang dapat dipilih sebelumnya. Diameter mata gergaji bundar: 1600 mm Daya motor gearbox: 0,1 kW Daya motor sikat: 0,75 kW Nilai sambungan sekitar: 400 V / 50 Hz Berat sekitar: 310 kg Dimensi P x L x T sekitar: 2400 x 850 x 1550 mm Warna: biru/abu-abu

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 1.981 h, kapasitas angkut: 1.400 kg, tinggi angkat: 5.016 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.165 mm, jarak tempuh: 1.981 km, BARU DATANG Stacker triplex listrik Merek: Still (Jerman) Nwodpfx Aaey Hdppsaof Tahun: 2017 Hanya 1.981 jam Kapasitas: 1.400 kg Ketinggian angkat: 5.016 mm Tinggi lewati: 2.165 mm Dilengkapi dengan: FREELIFT Dilengkapi dengan LIFT INISIAL Ideal untuk lantai tidak rata Baterai: dengan charger Sistem pengisian otomatis Video menyusul