Beli Veb Relais 100 Stück bekas (25.129)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Laedofdkb Uepfx Aatjb - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Lasdsguk A Hopfx Aatob

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard Lajdpfsfdkbhsx Aatob - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg Laedpfx Aasguk Dketeb - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version Laodpfxoguk Dvs Aatjb - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Tahun pembuatan: 1975, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis penggerak: Diesel 130 Kw, Patrol boat from the former East Germany (GDR), later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-proof, icebreaking capability up to 3 cm thickness. Certified for all waters, including open sea. Length: 11.90 m, beam: 2.90 m, draft: 0.90 m Speed: over 30 km/h Engine manufacturer: Schönebeck, 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine produces either 170 or 220 hp from a 10-liter displacement. These engines are fuel-efficient, consuming 6-8 liters per hour when cruising on canals at 8-12 km/h. Features: Lasdpfxey D Rk Is Aatob - Signal mast - Mast spotlight - Boat lighting - Helm station in cabin and flybridge - AGM batteries, start system 24 V, onboard network 12 V - Brand-new marine toilet - Automatic and manual electric bilge system - Complete overhaul from 2021 until 2023: 5-coat primer, 3-coat antifouling paint - Hull: steel, superstructure: aluminum - New electrical wiring, new exhaust system, new clutch, overhauled engine, overhauled fuel tank, new pipelines, new air filter Engine starts and runs flawlessly, gears engage smoothly for both forward and reverse. Some additional work needed for comfort. The boat is suitable as a small tug, workboat, or fishing boat. Note: Instruments and switches for lower helm station are included but not yet installed.

Kondisi: baik (bekas), Tahun pembuatan: 1982, nomor mesin/kendaraan: 1501-2, Penawaran 26128 Data Teknis: - Kapasitas beban maks. pada posisi horizontal: 5000 kg - Diameter plat meja: 1150 mm - Plat meja dapat diputar secara motorik: 0 - 130° - Putaran diatur secara elektrik, tanpa tingkatan - Putaran kanan dan kiri - Transfer arus las: sekitar 500 A - Penggerak: 400 V - Tinggi meja pada posisi horizontal: sekitar 1220 mm - Pengendali jarak jauh manual - Kebutuhan ruang: sekitar P 1350 x T 1220 x L 1900 mm - Berat: sekitar 3500 kg - Pelat adaptor dengan perangkat penjepit untuk material bulat Lasdpfx Aasy Ec Emotob

Kondisi: baik (bekas), Kotak susun, kotak plastik, kotak euro susun, keranjang transportasi, keranjang susun, wadah euro susun, palet muatan kecil - Ukuran luar: 400 x 600 x 170 mm - Dasar dan sisi berlubang - Kapasitas: 33 liter - Jumlah: sekitar 2050 unit - Minimal pembelian: 5 unit - Harga per unit: 4 Euro netto ex gudang Ledpfsuzn Dlox Aateab - Untuk pembelian besar, harga atas permintaan

Kondisi: sangat baik (bekas), 3 buah Adaptor chuck penjepit dengan tangkai 20mm, setara dengan 3R-653 Mini holder Chuck Adapter 3R-653 untuk tangkai 20mm Laodpfxew E Hice Aatob Termasuk batang penarik Setara dengan: Adaptor chuck manual, Macro-Mini, 3R-653 Termasuk 3 batang penarik 3R-605.1E Harga per buah: €200

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P pendingin air berbasis udara bekas ini, tahun pembuatan 2017. Nomor Proyek: 101048869 Nama Perangkat: S-GFHE 080.5/A-N(S)-G4/2P Nomor Seri Perangkat: 404549442/19.02129 Tahun Pembuatan: 2017 Suhu Lingkungan min.: -30,0 °C Suhu Lingkungan maks.: +50,0 °C Volume: 116,2 l Suhu yang diizinkan (TS) min.: -50,0 °C Suhu yang diizinkan (TS) maks.: +100,0 °C Tekanan uji: 11 bar Lajdpfx Aasy Akgyetob Kecepatan kipas: 2.609 rpm Arus kipas: 22,4 A Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirimkan pesan kepada kami atau hubungi kami.

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 251, Output speed: 31.5 rpm Output power: 0.37 kW Lodped Avb Dofx Aateab Electrical connection: 220/380 V Required space: 200 x 200 x 490 mm Weight: 15 kg with HEIDENHAIN rotary encoder

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 043700 001 7, Output speed: 31.5 rpm Rated power: 0.37 kW Electrical connection: 220/380 V, 1.9/1.1 kW Required space: 200 x 200 x 490 mm Weight: 15 kg Laedpfxsd Avbxo Aateb with HEIDENHAIN rotary encoder

Kondisi: sangat baik (bekas), Dijual holder milling profesional merek ORION – kualitas tinggi buatan Jerman. • Tipe SK40 Ø6-100 • Standar DIN 69871 AD – pendinginan sentral • Collet untuk Ø6 mm • Panjang 100 mm • Termasuk alat (frais / mata bor) • Kondisi sangat baik, bekas dan berfungsi penuh Holder ORION adalah pilihan andal untuk pusat pemesinan CNC dan mesin frais dengan tirus SK40. HARGA TERTERA UNTUK 1 PCS. Lsdpsxcgxvsfx Aatsab

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Heavy-Duty Granulator Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Feed Opening: 700 x 1000 mm Lodpeufi Rxefx Aateab Open Rotor: 600 mm diameter x 980 mm width Rotor Knives: 7 Stator Knives: 2 Additional Knife Set: 2 Knife Adjustment Table

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D20E/8022, Nomor penawaran: D20E/8022 Jenis mesin: Mesin penarik kawat ganda - kering Info: Tarikan lurus Merek: VEB Tipe: 8 blok Tahun pembuatan: Ledpfx Aajwi Tidstoab Diameter masuk: 2,5 mm Diameter akhir: 0,8 mm Jumlah tarikan: 8 Diameter pulley: 400 mm Kecepatan - meter/detik: 15 m Lokasi: Di Eropa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, en-001 Lsdpfxsyhzubs Aateab

Kondisi: bekas, d1-motor-20240606 Lasdpfx Aasyn R Sfotsb

Kondisi: bekas, nomor mesin/kendaraan: 12400, Fungsionalitas: berfungsi sepenuhnya, daya: 24 kW (32,63 hp), tegangan masuk: 380 V, arus masuk: 6 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, diameter alat: 25 mm, penjepit spindle: MK 4, kedalaman pengeboran: 120 mm, jenis penyesuaian ketinggian: mekanis, jenis aktuasi: manual, kecepatan rotasi (maks.): 1.000 rpm, kecepatan rotasi (min.): 63 rpm, lebar total: 590 mm, panjang total: 700 mm, tinggi total: 2.050 mm, kedalaman tenggorokan: 315 mm, lebar meja: 590 mm, panjang meja: 700 mm, berat keseluruhan: 1.000 kg, Column Drilling Machine VEB BK 25 AI – Robust Industrial Model For sale is a sturdy and durable column drilling machine, model BK 25 AI, manufactured by VEB Werkzeugmaschinenfabrik Saalfeld (GDR). Built with a heavy cast iron construction, this machine is ideally suited for use in workshops, mechanical engineering, maintenance, or training facilities. The machine offers a drilling capacity of up to 25 mm in steel and is equipped with an MK4 tool holder. A total of 12 mechanical speed stages provide high torque and allow optimal adaptation to various materials. The quill stroke is 120 mm, with a throat depth of 315 mm. The spacious worktable (700 × 590 mm) with T-slots offers versatile clamping options. Both the drill head and table are adjustable, ensuring flexible operation. The machine is powered by a 2.4 kW motor (380 V, 3-phase, 50 Hz). The speed range is from 63 to 1000 RPM. Technical highlights: - Drilling capacity (steel): 25 mm - Tool holder: MK4 - Speed range: 63 – 1000 RPM Lajdpfx Asyw Rpwjateb - 12 mechanical speed stages - Quill stroke: 120 mm - Throat depth: 315 mm - Table size: 700 × 590 mm - Total weight: approx. 1000 kg - Connection: 380 V / 3-phase Features: - Height-adjustable worktable - Mechanical speed adjustment - Rugged cast iron construction - Industrial design - Made in Germany (GDR) The machine is in good used condition and ready for immediate operation. Inspection under power is possible.

Kondisi: baik (bekas), • Tipe – FMF 100 • Mesin bor dua sisi • Diameter min.: 3 mm • Diameter maks.: 300 mm • Kecepatan putar: 110 – 4600 rpm • Bor bawah dengan pengumpanan otomatis, bor atas dioperasikan secara manual Ljdsuqma Ajpfx Aatjab

Kondisi: baik (bekas), 001 Lsdpjhtbdzofx Aateab

Kondisi: sangat baik (bekas), Dijual holder milling profesional ORION – kualitas dan presisi Jerman. • Tipe SK40 Ø10-100 (Weldon) • Standar DIN 69871 AD/B – pendinginan melalui spindle • Panjang total 100 mm • Penjepitan untuk alat Ø10 mm (sekrup samping) • Termasuk alat – end mill / bor (terlihat di foto) • Kondisi sangat baik, bekas, berfungsi penuh. Holders ORION adalah solusi ideal untuk pusat pemesinan CNC dan mesin milling dengan tirus SK40. Laedpfsxcgytex Aatob

Kondisi: sangat baik (bekas), Dijual holder milling profesional ORION – presisi Jerman dan kualitas tertinggi. • Tipe SK40 Ø8-100 K • Standar DIN 69871 AD/B – pendinginan sentral melalui spindel • Pengencang Weldon (sekrup samping) untuk alat Ø8 mm • Panjang total 100 mm • Kondisi sangat baik, bekas – berfungsi penuh • Termasuk alat (milling/drill terlihat pada foto) Ideal untuk pusat pemesinan CNC dan mesin frais dengan taper SK40. Ljdpsxcgygofx Aatsab

Kondisi: sangat baik (bekas), Holder profesional dari merek ternama GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – diameter penjepitan Ø6 mm, panjang 100 mm. • Taper SK40 – standar CNC • Diameter penjepitan Ø6 mm • Panjang holder 100 mm • Kecepatan putaran maksimum 25.000 rpm • Presisi dan kestabilan penjepitan tinggi • Kondisi bekas, berfungsi, siap pakai. -- HARGA DITAWARKAN PER 1 UNIT -- Lsdpfx Aew Sy D Ejatjab

Kondisi: sangat baik (bekas), Mikrometer digital profesional dari merek ternama Mahr – model Micromar 40 EWR(i) – dirancang untuk pengukuran yang sangat presisi dengan akurasi hingga 0,001 mm. Perangkat ini dalam versi IP65 tahan debu dan air, ideal untuk aplikasi metrologi, kontrol kualitas, dan bengkel industri. Rentang pengukuran: 100 – 125 mm. Akurasi: 0,001 mm. Pembacaan digital dengan layar LCD besar yang mudah dibaca. Tingkat perlindungan: IP65 – tahan debu dan percikan air. Fitur "ABS" dan "Hold" – penghentian pengukuran cepat dan fungsi reset. Rangka sangat kokoh dengan pegangan ergonomis. Paket termasuk kotak asli, sertifikat, buku panduan, dan standar kalibrasi 100 mm. Kondisi: hampir baru / hanya digunakan untuk pengujian. Lajdpfx Aexl Rgijatjb

Kondisi: baik (bekas), For sale is an external cylindrical grinding machine from VEB Werkzeugmaschinenbau, model SU 200/1x800. The machine is fully functional and ready for immediate use. Technical Data: - Grinding diameter: 200 mm - Grinding length: 800 mm - Swing diameter: approx. 160 mm - Headstock speed: 200–1000 rpm - Headstock taper: MK2 - Grinding wheel diameter: approx. 330 mm - Table size: 900 x 200 mm - Dimensions: 3050 x 1300 x 1430 mm - Weight: 4.6 t Lasdpjrdf Hgjfx Aatob On request and for an additional fee, loading and transport (Europe-wide) can be arranged. All prices are plus VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.