Beli Biesse Rover A Edge 1632 bekas (79.950)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, BIESSE-STREAM-A-6.0-2018 Godpfx Ajy S E Nnjf Sjbp

Kondisi: baik (bekas), Tahun pembuatan: 2017, Atas nama klien, kami menawarkan untuk dijual mesin Biesse berusia sekitar 10 tahun dalam kondisi baik. Investasi yang cocok untuk memulai produksi baru dengan anggaran terbatas. Gsdpfoywup Ujx Af Sobp

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Gbedpfoyxndbox Af Ssp Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7673

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.300 mm, jumlah spindel: 21, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 60 m/menit, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of stations: 10 MACHINE DETAILS Gedpjytr Ryofx Af Sjbp Total connected load: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Collets and cutters are not included in the scope of delivery. Safety guards are supplied as available (right side guard is missing). The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8174

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 2.400 mm, jarak lintasan sumbu Y: 1.200 mm, jumlah sumbu: 3, berat keseluruhan: 1.700 kg, kecepatan spindel (maks.): 24.000 rpm, BIESSE ROVER J FT 1224 3-sumbu ini diproduksi pada tahun 2017 dan memiliki area kerja 2400 mm x 1200 mm. Mesin ini dilengkapi dengan elektrospindel CNC dengan kecepatan maksimum 24.000 rpm dan meja vakum datar, sangat ideal untuk proses milling, pengeboran, dan pemrosesan panel. Manfaatkan kesempatan untuk membeli pusat pemrosesan kayu CNC BIESSE ROVER J FT 1224 ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Gsdpfjyfnp Aex Af Sobp • Sumbu: 3 dikontrol CNC (X, Y, Z) • Kapabilitas: Milling, pengeboran, routing kantong, pemrosesan panel • Tekanan udara: 7,5 bar • Kecepatan udara isap: 30 m/s Perlengkapan tambahan: • Meja vakum datar dengan suction cup

Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, Fungsionalitas: belum diuji, jumlah sumbu: 4, panjang meja: 4.300 mm, lebar meja: 2.200 mm, jumlah spindel: 40, diameter alat: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X direction: 6 Number of spindles for horizontal drilling in Y direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of positions in tool magazine 1: 22 Number of positions in tool magazine 2: 8 Godpfx Afeyq Ez Tj Sebp MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT Automatic panel loading system Automatic panel stacking system Lifting table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection, and assumes responsibility for installation, securing, and use of the machine at the final destination. External reference: 7087

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, X working area: 6,170 mm Y working area: 1,380 mm Z working area: 155 mm Main motor power: 7.5 kW Maximum spindle speed: 24,000 rpm Aggregate heads 4th axis C axis Tool change positions: 10 Vertical drilling heads: 20 Horizontal drilling units X: 6 Horizontal drilling units Y: 2 Gantry structure Worktable Console table Number of beams: 10 Positioning aid Vacuum pump capacity: 2 x 125m³/h Gbjdpfx Afsr E A U Io Sep Chip conveyor

Kondisi: bekas, CNC machining center for drilling and milling of wooden panels and derivatives, plastics, and non-ferrous alloys. Working area X - Y: 3685 - 1508 – 150 Continuous worktable Lateral and front reference stops Pendulum processing 2 independent working zones allowing simultaneous machining of two identical, mirrored, or different pieces Five-side machining of the workpiece "C-frame" machine structure 4-axis milling unit, HSD brand HSK F 63 tool interface Max spindle speed: 24,000 rpm Inverter 10-position tool magazine on head – max tool diameter 215 mm – max tool weight 4 kg Biesseworks software Easy programming File import capability Remote control console teleservice and video diagnostics: real-time solutions automatic guideway lubrication Gjdpfx Ajywxc Ssf Sjbp vacuum pump capacity: 1 x 250 m³/h centralized suction duct, diameter 250 mm safety devices lateral safety guards for the unit safety photocells instead of mats perimeter protection with access door Compressed air consumption: 400 NI/min Operating pressure: 7-7.5 bar Extraction air consumption: 5300 m³/h Machine weight: 4,600 kg Machine documentation: operation and maintenance manual, software manual, spare parts catalog, electrical diagram, CE certificate of conformity.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, CNC machining center Biesse Rover 20 Year of manufacture: 1997 Manufacturer: Biesse Italy S/N: 64851 Working area: 2,893 x 950 mm Gbsdpfx Afetpuu Ds Sep 6 traverses with 12 vacuum suction cups Milling spindle with ISO 30 tool holder, 3.6 kW Drilling unit: - 10 vertical drills - 6 horizontal drills Grooving saw 6-position tool changer Control: NC410 Color display Total power consumption: 10 kW 400 V, 50 Hz Includes safety fence (not shown in the pictures) 3 safety mats Becker vacuum pump, 3.0 kW CE marked 1,900 kg

Kondisi: bekas, Tahun pembuatan: 2009, BIESSE ARTECH Akron 430 A T Edge Bander - Used Technical Specifications: - Min./max. panel length: 140-3200 mm - Min./max. panel width: 85-3200 mm - Min./max. panel thickness: 10-60 mm - Min./max. edge thickness (coil): 0.4-3 mm - Min./max. edge thickness (strips): 0.4-8 mm - Min./max. edge height: 14-64 mm - Working height: 900 mm - Panel overhang on feed chain: 25 mm - Feed chain speed: 12 m/min - Extraction air velocity: 30 m/sec - Air supply pressure: 7-10 bar Standard Equipment: - SINTRA LT control - Infeed guide with mechanical viewer Trimming Unit: - 2 motors, 1.8 kW each, with pad copy followers - Vertical adjustment for tool positioning Gluing Unit: - Glue pot capacity: 2 kg - 3 pneumatic pressure rollers - Digital edge thickness readout Shear/Guillotine Unit: - 2 pressure settings depending on edge thickness Automatic strip edge feeder End Trimming Unit: - 2 motors, 0.50 kW each, with pad copy followers - 2 cutting positions (0°-15°), automatically selectable from the control panel (for increasing the edge overhang or for trimming at optimum finish height) Multifunction Corner Rounding Unit: - 4 selectable positions from the control panel - Edge finishing operations: straight, chamfer, radius 1, radius 2 - For each finishing position, overhang adjustment (+/-) is possible Edge Scraper Unit Godpjyt Nvgsfx Af Sobp Glue Scraper Unit Program creation for different finishing types Machine length: 3880 mm Weight: 1530 kg

Kondisi: bekas, Pusat pemesinan CNC BIESSE Rover C 6.50 CONF.2, tahun 2007 Area kerja: sekitar 140 × 460 cm Gbodpfxew Rpd Sj Af Sep Dimensi mesin: 300 × 650 cm Berat: sekitar 6.100 kg Dua kepala kerja Majalah alat: 22 posisi Spindel bor vertikal: 28 pcs Spindel bor horizontal: 12 pcs Harga dapat dinegosiasikan, tersedia segera. Harga belum termasuk PPN.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, msk-t-001 Gbsdpfxexh Spke Af Sep

Kondisi: baru, Tahun pembuatan: 2022, Travel paths (X, Y, Z): 6735 x 1930 x 245 mm Number of vertical drilling head spindles: 0 pcs Number of horizontal drilling head spindles: 0 pcs Number of tools: 39 pcs Extraction port diameter: 2x 250 mm Number of milling units: 2 pcs Year of manufacture: 2022 Speed: 18,000 / 24,000 rpm Compressed air connection: 7 bar Motor power: 16.5 / 19.2 kW Pump capacity: 250 m³/h Control: BH660 CNC Machining Center BIESSE Rover B 1967 - NEW MACHINE / STOCK MACHINE, originally packed! Working Area: X = 6735 mm Y = 1930 mm Z = 245 mm with modules H = 74 mm Z = 290 mm with modules H = 29 mm (milling operation) Workpiece clearance in Y: 1930 mm, with thickness up to 60 mm on modules H = 74 mm; 1880 mm, with thickness over 60 mm on modules H = 74 mm. Double Y-axis for 5-axis and 4-axis spindle (tool change possible during hidden time) Safety system with bumper and light barrier - 3-sided safety fence UPS 10 traverses - 30 base carriages Multiple clamping area automatic table positioning FPS HyperClamp clamping system 3 stop rows 8 loading aids 250 m³/h vacuum pump Chip conveyor belt 5-axis spindle with 16.5 kW - 18,000 rpm Deflector preparation Aggregate interface 4-axis spindle with 19.2 kW peak power - 24,000 rpm C-axis separate Y-axis for 5-axis and 4-axis No drilling head! Rotary tool changer traveling with 4-axis, 8 positions Rotary tool changer at the front for 5-axis, 8 positions Pickup for saw at the front for 5-axis Chain tool changer at the rear with 22 positions (Photo is for illustration purposes only!) FACTORY SEALED NEW MACHINE! New machine warranty! Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels Gjdpfx Afexf Dwzo Ssbp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, 1 Godpfeylziisx Af Sebp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, nomor mesin/kendaraan: 1000012445, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.600 mm, jarak lintasan sumbu Y: 1.800 mm, berat keseluruhan: 4.000 kg, en-001 Gbsdpsydk Aijfx Af Sop

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 94464, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.400 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 155 mm, model controller: XNC Numerical Control, DETAIL TEKNIS Area kerja Sumbu X: 3.400 mm Area kerja Sumbu Y: 1.300 mm Area kerja Sumbu Z: 155 mm Jumlah bidang kerja: 2 Posisi penukar alat (samping): 3 Posisi penukar alat (rantai): 20 Kepala bor: 10 mata bor vertikal pada sumbu X 12 mata bor vertikal pada sumbu Y 6 mata bor horizontal pada sumbu X 2 mata bor horizontal pada sumbu Y DETAIL MESIN Kontrol: XNC Numerical Control Tipe spindle vertikal: Sumbu C Vector, tipe konus Iso 30 PERLENGKAPAN Gedpfx Afjydkkge Sjbp Pompa vakum 8 batang penyangga cup vakum yang dapat disetel manual dengan indikator 8 bilah bakelit pneumatik untuk pengangkatan panel 3 cup vakum yang dapat diatur manual per batang Sistem perlindungan dan keselamatan depan dengan karpet Pelindung pagar menyeluruh Karpet bermotor untuk pembuangan serbuk

Kondisi: bekas, Tahun pembuatan: 2006, Numerical control XP 600 Working area X-axis: 3,060 mm Working area Y-axis: 1,140 mm Working area Z-axis: 160 mm Number of work zones: 2 Bar worktable 6 adjustable bars for suction cup support Number of pneumatic Bakelite bars for panel lifting: (?) 2 adjustable suction cups per bar with vacuum seal for securing the panel during machining Gbsdev Aacfjpfx Af Ssp 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions – located on the machine drill head, cone type ISO 30 Drill head BH19L with 18 spindles, arranged as follows: - 7 vertical spindles on the X-axis - 6 vertical spindles on the Y-axis - 4 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Air conditioning system for cooling and cleaning the machine control panel Vacuum pump: 250 m³/h TECHNICAL DATA TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2019, Numerical smart-touch control with Sintra HD software Panel height: 10 - 60 mm 22 mm solid wood PVC / ABS mm 3 Feed speed up to 25 meters/min Working height electronically adjustable via CNC Motorized pressure belt with increased pressure Motorized and electronically adjustable panel carrier guide via CNC Side roller conveyor with wheels for panel support ADZ-700 anti-stick unit Rectifier unit with 2 electronically controlled motors via CNC FI-502 Lamps for heating the panel edge AdIRL-700 Roll holder plate in 1 position Gluing unit for EVA hot-melt adhesive with QM-705 glue pot Additional glue tank Edge pressure group for straight profiles with electronically adjustable pressure rollers via CNC Anti-stick unit End trimming unit with 2 motors IN-801 Gbsdsr Ip Sdopfx Af Sop Flush trimming/post-processing unit with 2 motors electronically adjustable via CNC RF400 PRO-NESTING KIT for post-processing unit Anti-stick unit Corner rounding unit with 2 multifunction motors (radius + rounding) AR30 NC LPT-700 anti-stick liquid application system Electronic edge scraper, electronically adjustable via CNC RB400 PRO-NESTING KIT for edge scraper RCC-701 glue scraper unit Brush unit "SP-501" Telephone group "PH-700"

Kondisi: bekas, Tahun pembuatan: 2013, Machining center with automatic robot for loading and unloading panels Numerical control Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT technology (Windows Real Time): The machine control logic is processed directly on the PC and not on a dedicated special device Working area in X-axis: 6200 mm Working area in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. 2 working fields in X-axis Bar worktable / Console No. 10 EPS electronically adjustable bars for suction pad holders 8 pneumatic Bakelite rods for panel lifting – loading/unloading aid No. 4 electronically adjustable EPS suction pads per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool changer, motor 12 kW – 12000 rpm – flange for aggregates – C-axis vector ready Automatic tool change system with 12 places – mounted on machine head Drilling head BH35L with spindle arrangement as follows: - No. 14 vertical in X-axis - No. 10 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Independent saw blade for grooving in X-axis – diameter 120 mm Carpet front protection and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Gbodpfskvrxuex Af Sep Vacuum pump mc/h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent operating panel Panel alignment table Barcode reader on robot arm Panel feed system via: * 1 motorized roller conveyor for preloading panel stacks * 1 translating motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 * Number of axes: 6 * Permissible rated load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min/max length: 300/3000 mm * Panel dimensions – min/max width: 180/1500 mm * Panel dimensions – min/max thickness: 8/60 mm * Max. panel weight: 90 kg

Kondisi: bekas, Tahun pembuatan: 2009, Biesse factory control system Working area on the X-axis: 3500 mm Working area on the Y-axis: 1585 mm Stroke on the Z-axis: 350 mm 2 working zones Bar worktable 8 adjustable support bars 4 pneumatic Bakelite support bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal for securing the panel during processing 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK-type cone 10-position rotary tool change system on the working head 24-position chain tool change system—located at the rear of the machine Drilling head with vertical and horizontal spindles composed as follows: Gsdpfx Afjw D Dhaj Sobp - 12 vertical spindles in the X direction - 12 vertical spindles in the Y direction - 6 horizontal spindles in the X direction - 4 horizontal spindles in the Y direction 1 independent saw blade for producing X-grooves Carpeted front protection and safety system Perimeter safety fencing Chip extraction system with motorized conveyor belt Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment allows for the design of the finished product, process definition, work plan setup, simulation of machining operations on the 3D model of the machine, and generation of the necessary machine programs. bSolid – 3-axis machining bSolid – 5-axis machining module for surface operations using 5-axis units and interpolation movements across all 5 axes (X, Y, Z, C, B). The module includes the following commands: • 3D roughing and finishing operations assigned to surfaces • Extension or projection of toolpaths onto a curved surface • Machining on a plane • Following 2D or 3D curves with any tool type bSolid – 3D engraving bSolid – Import external formats Work areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm Clamping area in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carriages. The system includes: • 2 aluminium bars (1 left/1 right) on which the lateral stops glide. • 10 aluminium work tables. The tables slide on hardened and ground linear guides with recirculating ball bearings. Locking on both linear guides, front and rear, is achieved by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones along X. Godpfxsw D E A Es Af Sjbp Automatic positioning (EPS) for work tables. “EPS” (Electronic Positioning System): Device for automatic NC-controlled positioning of work tables and carriages, including locking mechanisms to exclude possible operator errors. Rear row stop, 140 mm stroke Intermediate row stop, positioned at 405 mm, 140 mm stroke Front row stop, positioned at 1460 mm, 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) per system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check whether the stops are lowered 12 clamps for holding narrow workpieces 6 loading aid bar lifters, for H = 74 mm module 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to two processing units (4 and 5 axis) and the option for simultaneous tool change. Includes axes and carriages for the movement of the main processing units. Comes with 2 inverters. Second Y-axis. Allows separation of front and rear Y carriages with independent drive. Both Y carriages reach a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation • Ceramic bearings • Clockwise and counterclockwise operation • Speed programmable by NC from 1,000 to 24,000 rpm • Release via pneumatic actuator using prismatic linear guide and recirculating ball bearings • Cover included for chip extraction with 6 positions ...

Kondisi: bekas, Condition: Used - Compatible Machine: EDGE BANDER - If interested, we offer an overhaul service; please contact us. Gbodpfx Ajvazxcof Ssp

Kondisi: bekas, nomor mesin/kendaraan: 008605, Tipe tepi yang dipasang: tepi tipis, tepi tebal Gbjdpfjzcmppsx Af Sjp Sistem perekat: EVA Pratrimmer: ya Unit multifungsi: ya Unit frais atas: ya Kecepatan maju maks.: 40 m/menit Ketebalan papan maks.: 60 mm Unit kerja: 9 unit

Kondisi: bekas, nomor mesin/kendaraan: 008603, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Agregat multifungsi: ya Mesin pelapis pinggir: Mesin 1 & 2 Kecepatan pendorongan maksimum: 40 m/menit Gbjdpezcmp Nefx Af Sep Unit kerja, sisi kanan: 9 unit Unit kerja, sisi kiri: 10 unit

Kondisi: bekas, nomor mesin/kendaraan: 007809, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Mesin pelapis pinggir: Mesin 1 Lebar panel maksimum: 1200 mm Kecepatan maju maksimum: 40 m/menit Gbedpfsyhbn Djx Af Sop Unit kerja, sisi kanan: 8 unit Unit kerja, sisi kiri: 8 unit