Beli Fume Arm-Ecac 2 bekas (79.507)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. Rjdpjmhhy Nefx Alaet According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights. Rjdpfxjmidyfj Alaot

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times Rsdpfx Alomkixweajt - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Redpfxefdkbho Alajt - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) Redemhh Dtepfx Alast - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Rsdpsguk Dvjfx Alast The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 332046, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 2.200 mm, kecepatan spindel (maks.): 850 rpm, kecepatan spindel (min.): 6 rpm, kecepatan pemakanan sumbu X: 8 m/menit, laju pemakanan gandar Y: 6 m/menit, laju pemakanan sumbu Z: 1 m/menit, lebar total: 10.000 mm, panjang total: 14.000 mm, tinggi total: 4.500 mm, diameter spindel: 160 mm, beban meja: 40.000 kg, panjang meja: 3.000 mm, lebar meja: 3.000 mm, berat benda kerja (maks.): 40.000 kg, berat keseluruhan: 71.000 kg, panjang spindel bor: 1.200 mm, tahun perombakan terakhir: 2002, daya: 60 kW (81,58 hp), Mesin bor pelat dengan meja putar CNC TDV5 untuk pekerjaan pemesinan yang menuntut. Rodpfx Aljuplptjast

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 18.950 h, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, drahtdurchmesser-01-03-mm-automatische-wiedereinfadelung-wasserb ad-betriebsstunden18950-std-verfahrwege-x-350-mm-y-220-mm-z-220-m m-u-350-mm-v-220-mm-millenium-steuerung-baujahr-2005 Rjdpewzyvhofx Alajt

Kondisi: baik (bekas), Tahun pembuatan: 2015, Spindel utama dan spindel lawan 3 turret Rjdpfsyx Tk Tjx Alajt Pemrosesan sisi belakang Sistem pemadam kebakaran Kraft & Bauer Sistem tekanan tinggi Büchele Majalah pemuatan FMB Turbo 2-20

Tahun pembuatan: 2006, jam operasional: 30 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4292-1-197652, Unit proses bekas dari perubahan produksi. Unit ini cocok untuk aplikasi dengan media yang bersifat kental atau sensitif terhadap suhu. Penjualan dari lokasi, inspeksi dapat dilakukan sesuai kesepakatan. Redjy Akm Hjpfx Alajt

Kondisi: bekas, de-1 Redpfx Aloyxg S Rsast

Kondisi: hampir baru (bekas), Tahun pembuatan: 2002, Die von Hand gezeigten Teile sind nicht enthalten. Rodpfjk It Utox Alaot

Tahun pembuatan: 2011, Kondisi: baik (bekas), Ausrüstung nicht im Lieferumfang enthalten. Rjdpfx Aljpxnwzeaot

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 2000 S Drátová elektroerozivní řezačka – Rok výroby 2015 – sada upínání EROWA Vysoce přesná CNC drátová elektroerozivní řezačka od výrobce GF AgieCharmilles ve velmi dobrém technickém stavu. Výrobce: GF AgieCharmilles Model: CUT 2000 S Rok výroby: 2015 Posuvy: Osa X: 350 mm Osa Y: 250 mm Osa Z: 256 mm Maximální rozměr obrobku: 750 × 550 × 250 mm Maximální hmotnost obrobku: 400 kg Provozní hodiny: Provozní doba: 73 182 h Hodiny eroze: 16 508 h Technické údaje: Napájení: 3 x 400 V Hmotnost stroje: cca 3 500 kg Vybavení: • Automatické navlékání drátu • CNC řídicí systém GF AgieCharmilles • Kompletní sada upínání EROWA • Více upínacích systémů a prvků EROWA • Přesné upínací prvky a příslušenství pro elektroerozi (viz foto) Výhody: • Velmi spolehlivý stroj pro výrobu nástrojů a přesných dílů • Vysoká přesnost řezu a vynikající kvalita povrchu • Moderní řídicí systém GF AgieCharmilles Stav: Stroj je v dobrém pracovním stavu. Stroj je pod proudem a lze jej vyzkoušet v chodu. Místo: Česká republika Dostupnost: Ihned Rsdpfx Asyzzazslaot

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6911122, lebar pemotongan (maks.): 920 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, 1 unit mesin pemotong Polar Mohr Tahun pembuatan: 1999 No. mesin: 6911122 Mesin sudah dibongkar, dikemas, dan berada di gudang kami. Lokasi: Austria Aksesori: - Tirai cahaya - Meja samping standar kiri dan kanan - Meja udara berlapis krom - Peralatan dan dokumentasi Rodpfxoyzyizs Alajt

Kondisi: bekas, Tahun pembuatan: 2000, jam operasional: 42.000 h, nomor mesin/kendaraan: IntNr231370, STAR SA 16-12 CNC sliding head lathe, built in 2000 FANUC 18i-T CNC control Operating hours: 42,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm Redeyw Inkjpfx Alajt - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool positions: 4 FMB Minimag bar feeder The machine can be inspected under power by prior arrangement. Technical data and information subject to change, error, and prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Kontrol Fanuc 32I-B, kapasitas batang 32mm, diameter pemotongan maksimum 32mm, panjang pemotongan maksimum 310mm, diameter pengeboran maksimum 13mm, kapasitas tapping maksimum M12, kecepatan milling 5.000rpm, kecepatan spindle 7.000rpm, sub spindle sumbu C 0,001 derajat, barfeeder FMB Turbo 3-36/3200, jumlah sumbu terkontrol: Z, ZB, X, XB, C1, C2, Y. Konveyor serpihan. Redpow Rct Hefx Alaet

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lubeca LW792 vulmachine en LW303 sluitmachine Diameterbereik: 50 – 160 mm Redpfx Astqmwgolaet Hoogtebereik: 65 – 300 mm Productiecapaciteit: tot 70 stuks per minuut Matrijzen voor ca.: 160 x 90 mm Lubeca LW792 blikvulmachine Lubeca LW303 bliksluitmachine

Kondisi: baik (bekas), Tahun pembuatan: 1965, Untuk data teknis, lihat gambar. Rodpfxsyvtm No Alaet

Kondisi: baik (bekas), Tahun pembuatan: 2013, jam operasional: 35.500 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, CNC Long Turning Automatic Merek: STAR Tipe: SV-32 Tahun pembuatan: 11/2013 dengan kontrol FANUC 16i TB Pemrosesan sisi belakang Spindel sinkron Revolver Alat bertenaga Sumbu C Pompa tekanan tinggi Rjdpsyu Nqysfx Alaot Sistem pemadam kebakaran Konveyor serbuk Majalah pemuatan batang FMB TURBO 3-36

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, kapasitas angkut: 2.000 kg, jenis bahan bakar: listrik, panjang garpu: 1.150 mm, berat kosong: 320 kg, panjang total: 1.750 mm, jenis penggerak: Elektro, lebar konstruksi: 750 mm, Low lift pallet truck Load center: 600 mm Fork width: 185 mm Fork thickness: 60 mm Rsdpfsu Dyw Ajx Alajt Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 24V Battery capacity: 160Ah Description: In addition to this Armanni model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing & financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with in-depth advice on this SL PESATORE 200/200. P.S.: Our master workshop specializes in repair, maintenance, overhaul and custom-built solutions for forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale. Electronic weighing system

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 14.000 mm, jarak lintasan sumbu Y: 6.000 mm, jarak gerak sumbu Z: 1.300 mm, laju pemakanan gandar Y: 1.300 m/menit, Hersteller: Dörries Scharman Maschinentyp: Gebrauchte CNC-Bohrautomaten – Horizontale Ausführung (Bodenbauweise) Modell: Heavycut 5.2 Baujahr: 1989 Steuerung: Siemens Zustand: Gebraucht Gesamtgewicht der Maschine: 219 Tonnen TECHNISCHE DATEN Hersteller: Dörries Scharman Maschinentyp: Gebrauchte CNC-Horizontalbohrwerke, Bodenbauweise Modell: Heavycut 5.2 Baujahr: 1989 Zustand: Gebraucht Gesamtgewicht der Maschine: 219 Tonnen TECHNISCHE DETAILS ISO 60 Fräskopf ISO 70 Drehzahlbereich: 5–1.000 U/min Leistung (kW): 100/90 Querschnitt: 480 x 480 mm Verfahrgeschwindigkeiten – Vorschub: X-, Y-, V-, W-Achse Eilgang: X-, Y-, V- und W-Achse Spindeldurchmesser: 200 mm Verfahrwege: X-Achse: 14.000 mm Y-Achse: 6.000 mm Z-Achse: 2.500 mm V-Achse: 1.300 mm W-Achse (Vorschublänge): 1.300 mm Max. Spindeldrehzahl: 630 U/min Spindeldurchmesser: 250 mm Tischbelastung: 80 Tonnen Rjdpfxsyx I Dnj Alast Tischlänge: 3.000 mm Tischbreite: 2.500 mm Steuerungssystem: Siemens Anzahl der Achsen: 5 (X, Y, Z, V, W) – 3+2 Ausführung Spindeldurchmesser: 250 mm Maße Spindelhülse: 500 x 500 mm Max. Spindeldrehzahl: 0,8 – 600 U/min Rundtisch: S80 B Max. Tischbelastung: 80 Tonnen Hydrauliköl: HL-46 Schmieröl: LAN 68 Bodenplatten: 2.500 x 3.000 mm (1 Stück) 1.800 x 4.000 mm (4 Stück) 2.400 x 7.500 mm (1 Stück) 2.400 x 8.000 mm (2 Stück)

Kondisi: belum diuji (bekas), Tahun pembuatan: 1996, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 65214/15502, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 250 mm, rentang pivot: 360 °, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara 04.05.26 dan 07.05.26. DETAIL TEKNIS Pergerakan sumbu X: 300 mm Pergerakan sumbu Y: 250 mm Pergerakan sumbu Z: 250 mm Rentang putar sumbu C: 360° Jarak maksimum antara permukaan meja dan kepala spindle: 460 mm Dimensi meja: 397 x 300 mm Berat benda kerja maksimum: 200 kg Jumlah alur T: 3 Dimensi bak kerja: 600 x 400 x 180 mm DETAIL MESIN Tegangan operasi: 380 V Rodpfx Aleyr Rmksaet Frekuensi: 50 Hz Arus nominal: 5 A Daya sambungan: 3 kVA Dimensi & Berat Dimensi (P x L x T): 2.500 x 2.000 x 2.500 mm Berat mesin: 2.000 kg Referensi eksternal: Lot 83

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 92568/331430, berat benda kerja (maks.): 500 kg, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 200 mm, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! Mengajukan penawaran berarti wajib melakukan pengambilan tepat waktu antara 04.05.26 dan 07.05.26. DETAIL TEKNIS Lintasan sumbu X: 400 mm Lintasan sumbu Y: 250 mm Lintasan sumbu Z: 200 mm Lintasan sumbu U: 400 mm Lintasan sumbu V: 250 mm Sudut konis/ketinggian: ±30° / 200 mm Dimensi benda kerja maks.: 850 mm x 500 mm x 200 mm Berat benda kerja maks.: 500 kg Dimensi meja: 720 mm x 500 mm Jarak lantai ke meja: 1.000 mm DETAIL MESIN Kontrol: CHARMILLES Tegangan operasi: 380 V Frekuensi: 50 Hz Arus nominal: 15 A Redpfjyr Nknex Alaot Daya terpasang: 10 kVA Dimensi & Berat Dimensi (P x L x T): 2.400 x 2.200 x 2.100 mm Lebar pintu: 900 mm Berat: 2.500 kg Referensi eksternal: 59

Kondisi: belum diuji (bekas), Tahun pembuatan: 1996, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 5.2661/330178, lebar meja: 440 mm, panjang meja: 730 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mengajukan penawaran berarti berkewajiban melakukan pengambilan tepat waktu antara 04.05.26 dan 07.05.26. DETAIL TEKNIS Dimensi meja: 730 x 440 mm DETAIL MESIN Kontrol: CHARMILLES Tegangan operasi: 380 V Frekuensi: 50 Hz Arus nominal: 15 A Koneksi: 10 kVA Dimensi & Berat Redpfx Alsyr Ndzsaot Dimensi (P x L x T): 2.500 x 1.600 x 2.200 mm Berat: 2.500 kg Referensi eksternal: 57