Beli Myref My-Zb26-Tfd bekas (675)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Birmingham
11.800 km
Pusat pembubutan dan frais vertikal
Pietro CarnaghiAP140 TMY
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, tinggi pembubutan: 8.000 mm, berat benda kerja (maks.): 350.000 kg, diameter pembubutan: 17.000 mm, panjang umpan sumbu Y: 5.000 mm, panjang umpan sumbu Z: 4.000 mm, diameter pelat muka: 10.000 mm, diameter meja putar: 10.000 mm, kecepatan rotasi (maks.): 35 rpm, kecepatan rotasi (min.): 2 rpm, kecepatan spindel (maks.): 3.000 rpm, beban meja: 350.000 kg, diameter meja: 10.000 mm, jarak lintasan sumbu Y: 5.000 mm, jarak gerak sumbu Z: 4.000 mm, masa garansi: 12 bulan, diameter benda kerja (maks.): 17.000 mm, Perlengkapan: dokumentasi / manual, Pusat pembubutan vertikal 5 sumbu berukuran besar. Belum pernah digunakan. Mesin perkakas yang luar biasa.
Nodpfx Abey Uvzmewolc
Iklan kecil
Irlandia
12.229 km
Mesin CNC bubut
GoodwayGS-260MYS
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 918106, diameter putar di atas sled silang: 500 mm, panjang pembubutan: 560 mm, diameter pembubutan: 420 mm, lubang spindel: 65 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 40 rpm, jarak pergerakan sumbu X: 230 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 600 mm, daya motor spindle: 15.000 W, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan rotasi (min.): 40 rpm, kecepatan rotasi (maks.): 4.000 rpm, tinggi total: 2.260 mm, panjang total: 3.430 mm, lebar total: 1.810 mm, panjang pemakanan sumbu X: 230 mm, panjang umpan sumbu Y: 110 mm, panjang umpan sumbu Z: 600 mm, diameter ayun di atas peluncur silang: 500 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, diameter pembubutan di atas alas geser: 650 mm, berat benda kerja (maks.): 230 kg, diameter pembubutan di atas carriage atas: 500 mm, jenis arus masuk: tiga fasa, torsi: 287 Nm, berat keseluruhan: 5.800 kg, diameter ayun di atas peluncur melintang: 650 mm, saluran batang: 65 mm, diameter luar chuck: 250 mm, lebar di tengah: 560 mm, hidung spindel: A2-8, Diameter batang (maks.): 65 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, 🔹 ZUM VERKAUF: Goodway GS-260MYS CNC-Drehmaschine Baujahr 2006 – Sehr guter Zustand – Irland 🔹
Hersteller: Goodway
Modell: GS-260MYS
Baujahr: 2006
Steuerung: Fanuc Series 18i-TB
Maschinentyp: CNC-Drehzentrum mit Gegenspindel, angetriebenen Werkzeugen, Y-Achse & C-Achse
Zustand: Sehr gut
Standort: Irland
Verfügbarkeit: Sofort verfügbar
📌 Beschreibung:
Zum Verkauf steht eine Goodway GS-260MYS CNC-Drehmaschine, Baujahr 2006 – ein leistungsstarkes, mehrachsiges CNC-Drehzentrum mit angetriebenen Werkzeugen, Y-Achsen-Fräsfunktion und Gegenspindel. Diese robuste Maschine eignet sich ideal für komplexe Dreh- und Fräsbearbeitungen in einer einzigen Aufspannung – perfekt für moderne Präzisionsfertigungen.
Die Maschine befindet sich in einem sehr guten und gepflegten Zustand und wird mit einer Auswahl an manuellen und angetriebenen Werkzeughaltern, 2 Spannfuttern sowie einem Späneförderer geliefert.
🔧 Technische Daten:
Hauptspindel:
Futtergröße: 10" (250 mm)
Stangendurchlass: 65 mm
Spindelaufnahme: A2-8
Max. Umlaufdurchmesser: 650 mm
Umlauf über Support: 500 mm
Max. Drehdurchmesser: 420 mm
Standard-Drehdurchmesser: 205 mm
Max. Drehlänge: 560 mm
Max. Werkstückgewicht: 230 kg
Durchlass Zugrohr: 65,5 mm
Durchlass Spindel: 76 mm
Spindelantrieb: Direkt über Riemen
Spindeldrehzahl: 40 – 4.000 U/min
Dauer-Spindelmotor: 11 kW
30 Min.-Spindelmotor: 15 kW
Spindelmoment (Dauer): 210 Nm
Spindelmoment (30 Min): 287 Nm
Achsen:
X-Achse Verfahrweg: 230 mm
Z-Achse Verfahrweg: 600 mm
Y-Achse Verfahrweg: ±55 mm
Eilgang X/Z: 20 m/min
Z2-Achse (Gegenspindel): 600 mm
Eilgang Z2: 24 m/min
Werkzeugaufnahme:
Revolverstationen: 12
Außenbearbeitungs-Werkzeugaufnahme: 25 mm
Innenbearbeitungs-Werkzeugaufnahme: bis 40 mm
Angetriebene Werkzeugstationen: 12
Angetriebener Werkzeugmotor: 4,5 kW
Max. Drehmoment angetriebene Werkzeuge: 22 Nm
Gegenspindel:
Futtergröße: 6"
Spindelaufnahme: A2-5
Durchlass Spindel: 46 mm
Dauerleistung Motor: 5,5 kW
30 Min-Leistung Motor: 7,5 kW
Drehzahlbereich Spindel: 60 – 6.000 U/min
Antrieb: Built-in Motor
Aufbau:
Führungsbahnen: Geschliffene und gehärtete Flachführungen
Maschinenabmessungen: 3430 x 1810 x 2260 mm
Maschinengewicht: 5.800 kg
🧰 Im Lieferumfang enthalten:
Auswahl an angetriebenen Werkzeughaltern
Auswahl an manuellen Werkzeughaltern
2x Spannfutter
Späneförderer
Nledpfswtpdfsx Abwjc
Achtung: Werkzeuge auf den Fotos sind nicht enthalten – es werden ausschließlich die Halter mitgeliefert.
🛠 Geeignet für:
Präzisionsdrehen, Dreh-Fräsbearbeitung, Fertigung komplexer Bauteile für Luft- und Raumfahrt, Medizintechnik, Automobil- und allgemeinen Maschinenbau.
Gebrauchte CNC-Drehmaschine Irland, Goodway GS-260MYS zu verkaufen, CNC-Drehmaschine mit Y-Achse und Gegenspindel, CNC-Drehzentrum mit angetriebenen Werkzeugen, CNC-Drehmaschine Europa, Fanuc CNC-Drehmaschine gebraucht, mehrachsige Drehmaschine gebraucht
Hinweis: *Alle Angaben nach bestem Wissen, jedoch ohne Gewähr*
Iklan kecil
Lipniki
10.492 km
Mesin bubut CNC
OkumaGenos L300-MYW-e
Hubungi
Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 33.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W6212-T63-280, Kami menawarkan mesin bubut CNC Okuma Genos siap pakai untuk dijual. Mesin ini sepenuhnya berfungsi dan dirawat serta diservis secara rutin.
- Sumbu Y
- Spindel utama dan spindel penangkap
- Probe alat
- Mekanisme penjemputan benda kerja
Putaran spindel: 3.800 rpm
Nedpfxow Np Uho Abwslc
Jam kerja spindel: 20.503 jam
Deskripsi detail mesin terdapat pada lampiran.
Kondisi teknis: Baik, mesin sejak baru berada di fasilitas kami, dibeli tahun 2017 dan dioperasikan pada kuartal pertama 2018.
Mesin bubut terhubung ke listrik dan sedang beroperasi. Tersedia kemungkinan untuk uji coba mesin secara langsung di fasilitas kami.
Keputusan penjualan didasarkan pada perubahan dalam proyek kami. Terdapat opsi pembelian tambahan feeder LNS (7.000 €) dan separator kabut oli (1.500 €), keduanya terlihat pada foto.
Iklan kecil
Skarżysko-Kamienna
10.299 km
Ruang penyiraman otomatis dengan dryin
ROMERAutomatyczna myjka
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes.
The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters.
Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash.
The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed.
Each tank is represented by its own unique symbol and name for intuitive operation by the user.
Nlsdpfxjfzq Sto Abwec
Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle.
• Control panel mounted on a swing arm for improved accessibility
• PLC microprocessor control
• 7'' touchscreen interface
• Significantly higher number of nozzles compared to conventional systems
• (Optional) Possibility to dry parts after washing
• Customizable advanced programming capability
• Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches
• Monitoring system for tight sealing and opening of the main flap
• Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination
• Intelligent control – prevents fluid mixing in the event of power failure or emergency stop
• Fully automatic operation
Pricing information is available in the catalog.
Iklan kecil
Skarżysko-Kamienna
10.299 km
Mesin cuci bertekanan
ROMER /Myjki ciśnienioweMyjka Ciśnieniowa
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control
• HMI Control Panel
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
User manual, declaration of conformity, 12-month warranty.
ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.
Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.
Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.
High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.
Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.
Nlsdpfx Aefz Dvcobwec
Iklan kecil
Skarżysko-Kamienna
10.299 km
Mesin cuci bertekanan
ROMER-myjkaMyjka Ciśnieniowa
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control
• HMI Control Panel
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
User manual, declaration of conformity, 12-month warranty.
ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.
Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.
Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.
Nlsdof Aaalopfx Abwec
High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.
Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.
Iklan kecil
Skarżysko-Kamienna
10.299 km
Mesin cuci bertekanan
ROMER /Pressure washerMyjka Ciśnieniowa
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control
• HMI Control Panel
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
Nljdpfjfz Dvvex Abwec
User manual, declaration of conformity, 12-month warranty.
ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.
Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.
Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.
High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.
Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.
Iklan kecil
Skarżysko-Kamienna
10.299 km
Mesin cuci bertekanan
ROMER /Pressure washerMyjka Ciśnieniowa
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control
• HMI Control Panel
Nlodpfx Aefz Ax Sebwsc
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
User manual, declaration of conformity, 12-month warranty.
ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.
Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.
Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.
High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.
Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.
Iklan kecil
Skarżysko-Kamienna
10.299 km
Mesin cuci tekanan
ROMER /Pressure washerMyjka Ciśnieniowa
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control
• HMI Control Panel
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
User manual, declaration of conformity, 12-month warranty.
ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.
Nsdpfx Absflpmqswjlc
Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.
Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.
High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.
Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.
Iklan kecil
Skarżysko-Kamienna
10.299 km
Mesin cuci bertekanan
ROMER /Pressure washerMyjka Ciśnieniowa
Hubungi
Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control
• HMI Control Panel
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
User manual, declaration of conformity, 12-month warranty.
ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.
Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.
Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.
Nedpefz A D Nofx Abwelc
High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.
Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.
Iklan kecil
Wachtendonk
11.297 km
Mobil boks
IVECODaily 70C18HP KOFFER LBW RFK LUFTFD LED AHK KLIM
Hubungi
Kondisi: bekas, jarak tempuh: 150 km, daya: 129 kW (175,39 hp), pendaftaran pertama: 06/2026, jenis bahan bakar: diesel, berat keseluruhan: 7.200 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang ruang muatan: 4.850 mm, lebar ruang muat: 2.200 mm, tinggi ruang muatan: 2.400 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), tail lift,
Iklan kecil
Finlandia
11.248 km
Kitamura Mycenter-4XT
KitamuraMycenter-4XT
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 510 mm, tinggi total: 3.023 mm, berat keseluruhan: 6.864 kg, kecepatan spindel (maks.): 15.000 rpm, berat alat: 8.000 g, panjang produk (maks.): 3.040 mm, jumlah sumbu: 5, This Kitamura Mycenter-4XT 5-axis machining center was manufactured in 2014. It offers an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 15,000 rpm and features a 30-position tool magazine. If you are looking for high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining center we have for sale. Contact us for further details.
• Control unit: Mitsubishi Arumatik (Fanuc-compatible)
• Availability: Immediately available
• Z-axis travel: 510 mm
• Table diameter: 400 mm
• Spindle hours: approx. 11,000 h
• Max. tool length: 300 mm
• Tool change time: 2 s
• Power supply: 58 kVA
Additional equipment
• 5th axis with 400 mm rotary table
• 2-speed ZF gearbox on spindle
• Through-spindle coolant (low pressure), high pressure prepared
• 3D probe
• Tool measurement system
• Chip conveyor (auger + lifting device)
• Approx. 30 tool holders included
Nlsdpfx Aboy Idcljwec
Technical Specification
Taper size: BT 40
Iklan kecil
Jerman
11.023 km
2002-hohner-economy-25-40
HohnerEconomy 25/40
Hubungi
Kondisi: bekas, Tahun pembuatan: 2002, Einkopf-DrahtheftmaschineKlopfer
Nsdoyv Eyzspfx Abwolc
Iklan kecil
Beringen
11.226 km
Pusat permesinan vertikal
DOOSANMYNX 500
Hubungi
Kondisi: sangat baik (bekas), de-01
Nlsdjy Hqyhepfx Abwoc
Iklan kecil
Le Vésinet
11.660 km
Pusat pemesinan vertikal
DAEWOOMYNX 500
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, FR-009
Nedsy S Altspfx Abwjlc
Iklan kecil
Österreich
10.787 km
Mesin EDM pembuat lubang
Hankook NSDMy630
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 755 mm, tinggi total: 2.280 mm, panjang total: 1.445 mm, lebar total: 19.975 mm, berat keseluruhan: 2.600 kg, Data teknis:
Lintasan gerak:
X: 600 mm
Y: 500 mm
Z: 755 mm
W: 500 mm
Tipe W:
Servo Motor
Dimensi (L x P x T):
1975 x 1445 x 2280 mm (maks. 2785 mm)
Kebutuhan ruang (L x P x T):
2100 x 1600 x 2900 mm
Diameter elektroda yang digunakan:
ø 0,1 ~ ø 3,0 mm (hingga ø 6,0 mm sebagai opsi)
Panjang elektroda yang digunakan:
800 mm
Berat mesin:
2600 kg
Berat benda kerja maksimum:
1000 kg
Daya:
3Ø 380V 50~60Hz (dapat diubah)
Arus maksimal yang diizinkan:
30A
Kapasitas beban nominal:
5KVA
Tekanan pneumatik yang diperlukan:
5 bar
Sistem penukar ion dengan sensor
Nlsdjy R Npvopfx Abwoc
Iklan kecil
Iszkaszentgyörgy
10.508 km
Pusat pembubutan dan milling CNC
HURCOTMX8MYSi
Hubungi
Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Travel distances X: 290 mm
Travel distances Z: 560 mm
Travel distances W: 640 mm
Travel distances Y: ±55 mm
Main Spindle
Main spindle power: 28 kW
Main spindle torque: 242 Nm
Spindle nose: A2-6
Bar capacity: 64 mm
Max. swing diameter: 508 mm
Chuck diameter: 203 mm
Spindle speed: 4,500 rpm
Feeds
Feed rate X: 24 m/min
Feed rate Z: 30 m/min
Feed rate W: 30 m/min
Feed rate Y: 12 m/min
Turret
Turret: 12 stations
Tool holders: VDI40
Max. boring bar diameter: 40 mm
Shank cross-section: 25×25 mm
Live Tools
Live tool speed: 4,000 rpm
Live tool power: 5.4 kW
Live tool torque: 24 Nm
Nsdpfx Abey Dgfbswolc
Indexing time: 0.16 s
Sub Spindle
Sub spindle max. speed: 6,000 rpm
Sub spindle torque: 70 Nm
MACHINE DETAILS
Electrical connection values: 66 kVA / 95 A / 400 V
Air connection values: 7 bar / 150 l/min
Weight: 7,000 kg
Operating Hours
On-time hours: 60,496 h
Spindle hours: 19,299 h
EQUIPMENT
Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000
Various channels
Chip conveyor
Tool setter
Transformer
Cooling unit
Coolant tray
Fixed and driven tool holders
Replacement main spindle (unregenerated)
Various collet chucks size 65
Documentation (circuit diagrams, operator manual, etc.)
Iklan kecil
Zaventem
11.436 km
Mesin penjilid buku
Müller Martini Amyrs/PrimaAmyrs/Prima
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Müller Martini Amyrs/Prima
Model tahun 2000, 8 feeder, 1 unit cover, jahit kawat, pemotongan tiga sisi, steaker
Produksi per jam: 14.000 unit
Nledpfxjy Sipro Abwoc
Format min: 90 x 105 mm
Format maks: 320 x 480 mm
Iklan kecil
Britania Raya
11.816 km
Printer jet
MycronicMY500
Hubungi
Tahun pembuatan: 2014, jam operasional: 4.000 h, Kondisi: bekas, Mesin operasional dengan jam kerja rendah! Silakan hubungi kami untuk informasi lebih lanjut!
Nsdpfx Aboy R Dc Djwolc
Iklan kecil
Jerman
11.248 km
Okuma LB3000EX MYW
OkumaLB3000EX MYW
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 4.200 rpm, jarak pergerakan sumbu X: 200 mm, jarak gerak sumbu Z: 1.000 mm, daya motor spindle: 22.000 W, tinggi total: 2.300 mm, lebar total: 2.100 mm, berat keseluruhan: 6.100 kg, panjang produk (maks.): 3.900 mm, jumlah slot dalam magazin alat: 24, jumlah sumbu: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal turning center we have for sale. Contact us for further details.
• OKUMA OSP P200L control system
• OSP-P200 control
• 12-station radial tool turret
Nodpey Ddtvefx Abwolc
• Turret: 12 stations
• Number of turrets: 2
• Toolholder: BMT 60
• Number of tools: 24
• Driven tool station power: 7.1 kW
• Driven tool torque: 40.4 Nm
• Driven tool speed range: 45-6000 rpm
• C-axis included
• Y-axis travel: mm
• X-axis travel: 200 mm
• Z-axis travel: 1000 mm
• Hydraulic Y-axis clamping
• Sub-spindle with W-axis
• Spindle configuration: twin-spindle
• Main spindle bore: 110 mm
• Spindle bore approx.: 80 mm
• Spindle nose: A2-11
• Spindle speed range: 28-2800 rpm
• Spindle speed: 4200 rpm
• Main spindle VAC drive: 22/15 kW
• Power at 40% duty cycle: 22 kW
• Max. turning diameter: 360 mm
• Programmable chuck pressure (2 stages)
• Thread milling interpolation X/Y and Z/Y axes
• Programmable parts catcher
• Chip conveyor with integrated coolant tank
• Heavy-duty paper band filtration system
• Coolant tank capacity: 480 l
• Coolant pump: 40 l/min at approx. 20 bar
• Coolant pump type: Brinkmann TH 90/690-FSI
• Extraction nozzle diameter: 200 mm
• Hollow clamping cylinder bore: 110 mm
• Power chuck: FORKARD QLC-KS 250-101 Z8
• Chuck bore: 101 mm
• Draw tube for spindle max. 100 mm
• Clamping range: 42-100 mm
• Manual collet change device
• Sub-spindle stroke: 150 mm
• Bar capacity diameter: 5-100 mm
• Spindle reduction tube diameter: 90 mm, length 1500 mm
• Chip removal conveyor: PVC with PU coating
• Hydraulic clamping cylinder bore: 52 mm
• Machine dimensions: 3.9 m x 2.1 m x 2.3 m
• Machine weight approx.: 6100 kg
• Maintenance contract: yes
• Utilization: 60%
Additional equipment
• Bar feeder
• OPTIONAL at extra cost: approx. 200 tools available, collets, power tools
Technical Specification
Counter Spindle No
Driven Tools Yes
Iklan kecil
Győr
10.549 km
Mesin bubut CNC
OkumaLB2000 EX II MYC
Hubungi
Kondisi: baru, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Standard technical specifications:
Swing diameter over bed: 580 mm
Swing diameter over carriage: 470 mm
Max. machinable diameter: 360 mm
Machinable workpiece length: 250 mm
Travel (X): 260 mm
Travel (Z): 350 mm
Travel (Y): 100 mm (+-50)
C-axis: 360 degrees (0.001-degree increments)
Spindle speed: 50–6,000 rpm
Spindle nose: JIS A2-6
Spindle bore diameter: Ø62 mm
Front spindle bearing diameter: Ø100 mm
Turret type: M-V12
Number of tools: 12
Tool size: 20x20 mm
Tool shank diameter: Ø32 mm
Tool change time: 0.1 sec
Driven tool speed: 45–6,000 rpm
Rapid traverse (X): 25 m/min
Rapid traverse (Z): 30 m/min
Rapid traverse (Y): 12.5 m/min
Main spindle motor power (15 min/continuous): 11/7.5 kW (PREX)
Driven tool motor power: 5.5/3.7 kW (PREX)
Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm
Machine weight: 4,050 kg
Control: OSP P300L
Standard Specification
1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L
CNC Controller, including CE mark & EMC
1 set
European Standard Specification
1-1. V12 radial turret head 1 set
1-2. Main spindle 1 set
(1) Spindle speed, 50–6,000 rpm (1 set)
(2) Spindle motor Prex 11/7.5 kW (1 set)
(3) Spindle: JIS A2-6; bore Ø62 (1 set)
(4) C-axis control, 360 degrees (0.001-degree increments) (1 set)
(5) SR1146 hydraulic cylinder for chuck (1 set)
1-3. MT4 tailstock
1-4. Dual-function foot pedal for chuck and tailstock side, 2 sets
1-5. Driven tool motor, PREX 5.5/3.5 kW (2 min continuous) 1 set
1-6. Driven tool speed, 45–6,000 rpm 1 set
1-7. Work area lighting 1 set
1-8. Full enclosure 1 set
1-9. Chip tray 1 set
1-10. Door interlock 1 set
1-11. Lubrication monitoring 1 set
1-12. Automatic chuck open/close on main spindle 1 set
1-13. Chip air blow-off 1 set
1-14. Levelling bolts 1 set
1-15. Tool setter 1 set
1-16. CE marking 1 set
1-17. IEC standard compliance 1 set
1-18. Transformer 1 set
1-19. Coolant system with 250W pump 1 set
1-20. OSP-P300L CNC control with 15" color touchscreen monitor 1 set
1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set)
*Multitasking machines Coordinate conversion (1 set)
*Multitasking machines Profile generation (1 set)
*Advanced One Touch IGF (graphical programming assistant with dialog-based user interface) (1 set)
*Real 3D simulation (1 set)
Nlsdpoy H H Afofx Abwec
*Cycle time over check (1 set)
*Load monitoring (1 set)
*NC operation monitoring (1 set)
*Cycle time reduction function (1 set)
*Hi-Cut Pro (servo optimization based on process) (1 set)
*Variable spindle speed control (1 set)
1-22. Two-level status indicator light 1 set
1-23. Program storage 2GB 1 set
1-24. Operating memory: 2MB 1 set
1-25. Spindle orientation, electric 1 set
1-26. Inch/metric conversion 1 set
1-27. Ballscrew pitch error compensation on X/Z axes 1 set
1-28. Workpiece overhang detection 1 set
1-29. Lifting lugs 1 set
1-33. TAS-C frame thermal compensation
6” Chuck
Chip conveyor
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Duxford
11.686 km
Grant JB Academy 6005 water bath
GrantJB Academy 6005
Hubungi
Kondisi: bekas, Listing ini untuk Grant JB Academy 6005 Water Bath.
Unit dalam kondisi kerja penuh dan siap langsung digunakan.
Nsdsy Iw Eyjpfx Abwslc
Rentang produk Grant Instruments JB Academy terdiri dari water bath digital tanpa pengaduk — water bath laboratorium dasar yang dirancang untuk memanaskan dan menjaga cairan pada suhu terkontrol. Sering digunakan di laboratorium pengajaran, lingkungan riset, sekolah, dan universitas di mana dibutuhkan water bath pemanas sederhana yang andal.
Iklan kecil
Hallein
10.895 km
Hurco TMX8MYS, (penjualan langsung ke pelanggan)
HURCOHurco TMX8MYS, Bj. 2011
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, HURCO TMX8MYS
H-TS8034
Nlsdoxg D A Hepfx Abwoc
Tahun pembuatan: 2011
Iklan kecil
Konak
9.646 km
Band saw
DİSPA MAKİNAM-Y 270 MAFSALLI ŞERİT TESTERE
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: M-Y 270, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 818 h, daya: 380 kW (516,66 hp), ketinggian potong (maks.): 270 mm, lebar pemotongan (maks.): 270 mm, tinggi total: 900 mm, panjang total: 1.650 mm, lebar total: 810 mm, berat keseluruhan: 550 kg, tinggi meja: 1.500 mm, tahun perombakan terakhir: 2026, Perlengkapan: Penandaan CE, dokumentasi / manual, Dengan pengalaman lebih dari seperempat abad, kami telah menjadi simbol kualitas, daya tahan, dan keandalan di industri gergaji. Didukung oleh keahlian praktis selama 25 tahun dan pengetahuan industri yang mendalam, kami tidak hanya menawarkan produk — kami memberikan solusi jangka panjang untuk pelanggan kami.
Setiap produk kami dirancang untuk kinerja tinggi, pemotongan presisi, dan efisiensi maksimal. Solusi gergaji kami mempertahankan kualitasnya bahkan di kondisi paling menantang dan menjadi pilihan utama para profesional.
Nodpey Akggsfx Abwelc
Dengan terus beradaptasi terhadap perkembangan teknologi, kami selalu meningkatkan diri tanpa pernah berkompromi pada standar produksi kami. Karena kami percaya hasil yang kuat dimulai dengan alat yang tepat.
Kekuatan kami berasal dari pengalaman, ketajaman kami dari hasrat terhadap keahlian kami.
Iklan kecil
Lauda-Königshofen
11.106 km
Stapler
HohnerEconomy 25/40 - 15/25 - 25
Hubungi
Kondisi: baik (bekas), Hohner Economy 25/40 - 15/25 - 25 stapling machines in good condition, immediately available
Njdjh Um Nljpfx Abwslc
Kami memudahkan pencarian untuk Anda: "myref my-zb26-tfd"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.



































































































































































































































