Beli Omga Joint 502 bekas (1.713)

Kondisi: sangat baik (bekas), #01 Kdodpfx Asy Apf Uscion

Kondisi: bekas, Lubang: 40 mm Diameter lingkaran pemotong (ø): 125 mm Panjang: 30 mm Bahan: baja Pisau: WP Z2 Kdodpfewrrnwex Acion

Kondisi: bekas, Lubang bor: 40 mm Lingkaran terbang (ø): 125 mm Penandaan: BG-Test Panjang: 30 mm Bahan: baja Kjdewrrmmopfx Aciodn Pisau: WP Z2 V4

Kondisi: bekas, Lubang bor: 35 mm Diameter lingkaran (ø): 140 mm Ksdpfx Aewma S Teciedn Panjang: 40 mm Bahan: Baja Pisau: WP Z2 V2

Kondisi: bekas, Lubang: 40 mm Kdodpfx Acov Dgmmjion Diameter lingkaran kerja: 145 mm Panjang: 17 mm Material: baja Pisau: WP Z2 V2

Kondisi: bekas, Lubang: 40 mm Diameter lingkaran kerja: 145 mm Kodev Df Shepfx Aciodn Panjang: 17 mm Material: baja Pisau: WP Z2 V2

Kondisi: bekas, Lubang bor: 30 mm Lebar: 60 mm Pisau pengganti: Atas permintaan Lingkar terbang (ø): 100 mm Kjdot Starjpfx Acisdn Bahan: baja Pisau: WP Z2

Kondisi: bekas, Knife: Z4 - 125 x 20 x 35 mm, - max. speed 9,000 rpm, - MECH. Kdodpfolf I Hkex Acion

Kondisi: baik (bekas), Stegherr 2 motori da circa 2,2 kW ciascuno Kdsdpfx Ajzakw Escisn Potenza di collegamento circa 4,5 kW Aria compressa 6 bar Tensione 380 V 50 Hz

Kondisi: bekas, Tenoner FC-10KZ6: Milling spindle: 50 mm Motor: 18 kW Spindle speed: 6000 rpm Tool dimensions: 250/50 mm Extraction port diameter: 150 mm Chipper: 300 mm x 8 mm Chipper motor: 6 kW - 3000 rpm Chipper extraction port diameter: 80 mm Table working width: 600 mm Board thickness: 20-50 mm Working height: 25 - 120 mm Laminated board length: 200 - 600 mm Table drive: electromechanical Feed rate: 3 - 30 m/min, stepless control Glue applicator: special gluing unit with a comb Laminated board loading: manual onto a belt conveyor unit Other operations: automatic Press FC-10PZ6/2: Laminated board width: 25 - 120 mm Laminated board thickness: 20 - 50 mm Finished board length: 6000 +20 -50 mm Pressing: hydraulic Hydraulic cylinder: 100 mm Hydraulic power unit: up to 100 bar Power unit motor: 3 kW - 1500 rpm Cut-off saw: 400 mm Saw motor: 3.5 kW Set output depending on material used: up to 4 cycles/min (up to 4 boards at 6 metres/min) Dimensions: Length: 13,600 mm Width: 3,800 mm Height: 1,850 mm Kdodpfx Acey Ud Uusien

Kondisi: baru, The manual milling machine Omec 650-M is designed for producing dovetails on drawers and various furniture components. The machine is equipped with a spindle unit featuring a cutter, which allows the creation of dovetails with different heights. The machine can cut four types of dovetails with different pitches. Clamping and unclamping of the workpieces is performed manually using eccentric shafts. Operation (on/off) is managed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. Ksdpfx Asdcdwbecijdn The machine is manufactured in accordance with CE standards. Technical data: - Connected load: 0.75 kW, 400 V, 50 Hz - Number of spindles: 1 - Spindle speed: 16,500 rpm - Standard dovetail pitch: 25 / 40 / 50 / 60 mm - Machine weight: 100 kg - Footprint (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: - Workpiece length: 200 – 1500 mm - Workpiece width: 60 – 280 mm - Dovetail height: 5 – 18 mm - Workpiece thickness: 7 – 45 mm The machine is supplied with the following standard components: - Eccentric HSS cutter mounted on the machine - Set of tools for adjustment and maintenance - Operating manual.

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Mesin-mesin terhubung dalam satu lini (semua tiga mesin hanya dijual bersamaan): 1. Mesin sambung melintang veneer FURNIMASTER FZR-21 2. Perangkat bongkar langsung DA-12R Kdsdsy Tpb Rspfx Acion 3. Meja angkat gunting TERMASUK Spesifikasi veneer Panjang strip veneer (arah serat) 350 - 2100 mm Lebar strip veneer (lawan arah serat) 50 - 500 mm Ketebalan strip veneer 0,3 - 1,5 mm Data daya Output nominal maksimum / siklus mesin 30 siklus/menit Kecepatan produksi rata-rata 17 - 20 siklus/menit Data koneksi (Mesin utama) Daya terpasang 9 kW Udara bertekanan 6 bar Konsumsi daya Energi listrik 6,2 kWh Udara bertekanan 15 NL/menit Dimensi dan berat (Mesin utama) Panjang 3500 mm Lebar 1500 mm Tinggi 1530 mm Tinggi meja kerja 930 mm (+50/-0 mm) Berat bersih, kurang lebih 2500 kg

Kondisi: bekas, Tahun pembuatan: 1994, prestagni-001 Ksdpeyrhyusfx Aciodn

Kondisi: bekas, Tahun pembuatan: 2007, Pengeluaran Palamides Delta 502 Tahun produksi: 2007 - Penumpuk vertikal - pengikat bundel - Unit pembanderol: 2 Tegangan: 220 Volt Kodpfx Ajy Iv Nqscisdn

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 71, Lini untuk penyambungan finger joint GOMA FC10 KZ6 + FC10 PZ6 MESIN TENONING FC-10KZ-6 Kjdpfey Sw Uvex Aciedn Spindle milling 50 x 210 mm Motor utama 18,5 kW Chipper 300/60 x 8 mm, 6 kW Pisau potong untuk sambungan lurus 2x160 mm, 1,1 kW Lebar kerja meja 600 mm Tinggi paket 30 hingga 150 mm PRESS FC-10PZ6 Lebar paket 30-150 mm Ketebalan 20-70 mm Pompa hidrolik 100 bar Panjang papan jadi 6000 mm Dapat melakukan pemotongan antara, misal 2x3000 mm, 6x1000 mm, dll. Mesin dalam kondisi baik, bekas pakai. Kondisi teknis baik. Harga 110.000,00 PLN netto, masih bisa nego.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Kedpey Dtpmofx Acisdn Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, pl-hu-001 Ksdpjy R Ewpofx Aciedn

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WMA WMP 08 Spot Welding Unit in TOP Condition This device shows hardly any signs of use and was only deployed very occasionally. Air-cooled one-hand spot welding unit for vehicle manufacturing, tank construction, steel cabinet production, sheet metalworking, and the wire industry - Trouble-free welding of all types of sheet metal - Galvanized sheets can be welded perfectly thanks to controlled current rise and drop - Air-cooled, but equipped for external water cooling - Tools can be easily changed via standardized rotary couplings - Single connection for welding current cable, control cable, and water cooling - Consistently reproducible welding results via built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Complete process monitoring - Simple, user-friendly operation - All set parameters and process values are visible at a glance - Welding parameters can only be changed by authorized personnel - Configuration and program settings management via central PC possible WMA WMS 108 Microprocessor Thyristor Control - 7 timing steps - 8 programs - Built-in device - Automatic mains frequency detection 50/60 Hz - Power failure-proof parameter storage - 'With/Without Current' switching at the press of a button Additional configuration parameters (locked for users): - Program selection - Step advance contact - Time for step advance - Two-hand lock (check) - Start signal lock - Current flow monitoring - Response threshold - Monitoring time - Power factor adjustment - Delay of 1st half-cycle External Inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* Kjdpexrb Tgjfx Aciodn - Pressure contact - Program 1* - Program 2* - Pre-stroke On - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be enabled or locked via configuration parameters. External Outputs (24V, DC unregulated ±20%; switching, max. 5 W): - Solenoid valve for pre-stroke - Solenoid valve for welding - Step advance relay - Ready-for-operation relay Shipping via freight forwarding can be arranged after consultation. #8407

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, KSF-2E adalah mesin frais CNC spesialis terkemuka di dunia untuk produksi otomatis sepenuhnya dan pemrosesan lengkap sambungan silang dan kisi berkualitas tinggi dalam produksi seri grid jendela dan pintu. Berkat agregatnya, mesin ini menghasilkan sambungan silang dari kayu, aluminium, MDF, atau PVC dengan kualitas luar biasa dan memproses semua elemen kisi grid dengan sempurna. OPERASI • Sambungan silang dalam berbagai desain dan ukuran • Pemrosesan ujung grid • Pemotongan profil bingkai sesuai ukuran Kdodpfxsxl Dnas Acion Mesin juga dilengkapi dengan konveyor lintas / penyimpanan elemen tambahan.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, KEILZINKENANLAGE finger jointing machine Keilzinkanlage für Holzpakete -Holzpaketbreite 500 mm -Holzlänge 200 - 2000 mm -Holzbreite 50 - 215 mm -Holzstärke 25 - 100 mm -Fräsleistung 2,5- 3 Tischen/min -Presskraft max. 12000 kp (Option 15000 kp) -Fertigungslängen endlos lang bestehend aus: A) Vereinzelungsstation mit Abkippvorrichtung B) Keilzinken-Zentral-Fräsmaschine ausgestattet mit : -2 Frässpindeln je 18,5 kW -2 Zerspaner je 7,5 kW C) Einfädelstrecke mit 2 Transportketten D) Vorschubapparat mit Doppelwalzen E) Strangpresse 12 to F) Ablängsäge >> Anlage kann auch in anderer und modifizierter Ausstattung geliefert werden Kdodelatv Aopfx Acion

Kondisi: baru, Tahun pembuatan: 2025, 1 Ksdpsy Eizzjfx Aciodn

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, G-571-0053 Kdsdpey R A Eqjfx Acisn

Kondisi: siap digunakan (bekas), de-hu-it-lt-001 Kjdpfxobqqzgj Acijdn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Data teknis: Panjang muatan kayu: 150–700 mm Lebar kayu: 40–150 mm Tebal kayu: 20–50 mm Panjang press: 6100 mm Kodpfsy N D A Uox Aciodn Gaya penekanan: 120 kN/12 t Daya spindle frais: 15 kW Daya penghancur kayu: 5,5 kW Sistem aplikasi lem: Flankenjet / Nozzle lem Kapasitas: Mesin pembuatan tenon – 2 paket per menit Press – 2 siklus per menit

Kondisi: bekas, Arbeitsbreite-von-bis-45-95-mm Kdedpfoy Dh Sisx Acion