Beli Panhans 445/A Mit Suvamatic bekas (81.372)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Stair Stringer Milling Machine SCHEER TW 4 + Router HM 16 Dksdpfjyxr T Tjx Ac Tjp All equipment is in excellent, like-new optical and technical condition, having been used only very sparingly. Everything works perfectly—you can put it straight to work. All machines are designed for professional, commercial use; not DIY/home improvement store quality. Stair Stringer Milling Machine SCHEER TW 4 - Enables highly precise and accurate routing of treads and risers - Handwheel operation allows even curved joint faces to be machined; also suitable for producing cut-outs in other panel materials, such as worktops - Equipped with hardened guide shafts supporting the cross-slide with router - Ball bearing guide bushings provide very smooth, highly accurate, and safe movement - Secures to stringer or similar workpieces with 4 screw clamps - The cross-slide includes 2 stops each for the longitudinal and transverse directions - Supplied with 2 angle stops - Includes manual, tools, and all accessories - Longitudinal travel: 750mm; transverse travel upgraded from 75mm to 320mm, vastly expanding the machine's range of applications - To enlarge the travel, a new base frame made of aluminum profiles was custom manufactured - Modifications were performed by a reputable machine engineering company - Everything works flawlessly, making this machine a true one-of-a-kind piece Router SCHEER HM 16 - Excellent condition, minimal signs of use - Extremely robust thanks to triple-bearing mounted spindle - Precise concentricity and immaculate cutting results - Accurate column guidance and torsion-resistant router table - Maintains constant speed under heavy load - Equipped with a high-performance motor (virtually no fatigue) - Long service life thanks to soft start (full-wave electronics) - Bearings are in good condition - Designed for heavy-duty, continuous milling operations - Excellent visibility of the cutter spindle; chips are cleared by a powerful blower - 220V, 1800W - Speed: 18,000 rpm - Works perfectly - With M16 internal thread mount

Kondisi: sangat baik (bekas), konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2016, panjang total: 13.900 mm, lebar total: 2.550 mm, suspensi: udara, ukuran ban: 385/65/22.5, jarak roda: 9.970 mm, warna: biru, Tahun pembuatan: 2016, Perlengkapan: ABS,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Tilting spindle moulder MAKA SF 4510/ GRIGGIO with power feed Very good condition, the machine comes from a small village carpentry workshop with 3 employees Everything works perfectly All bearings and guides are in excellent condition, the machine runs very smoothly Comes with a milling fence, one fence jaw is depth-adjustable and features a fine adjustment with scale, allowing tasks such as jointing, e.g., when making a glue joint profile The entire milling fence can also be adjusted with a set screw, enabling very precise settings With spindle lock via clamping lever Optimal chip extraction with two 120mm extraction ports—one on the milling fence and one on the machine body Equipped with a 30mm spindle, infinitely tiltable from -5° to 45°, tilt adjustment by handwheel with accurate degree scale With forward and reverse operation We deliver the machine personally throughout Germany for €220.00 and provide a demonstration upon delivery—so there is no risk when you purchase; delivery to other EU countries is also possible Large table opening, adjustable in size via several rings (thus, you can use very large diameter cutters and also work safely with small cutters) Spindle speeds: 3200, 4200, 6000, and 8000 rpm Spindle height adjustment also via a handwheel with lock screw Interchangeable spindle (a 40mm spindle can also be used) Optimal power transmission via V-belt drive Table size: 1070mm wide x 940mm deep Ready for immediate use 380V, 5500W, with motor protection switch against overload Dkodpfx Asy Rh Nzoc Tsp Year of manufacture: 1999 Weight: approx. 700kg Machine has CE certification Comes with manual, motor brake, and emergency stop switch, complies with all woodworking trade association (Holz-BG) requirements Additionally, you'll receive a 3-roller power feed unit from HAFFNER with 8 speeds Optimal, simple, fast, and safe operation

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard Dodpfx Acsh R Taqs Tjkp - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Dsdpemhhy Njfx Ac Tskp Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya05, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" Dodpfx Acoykuh Ns Tekp FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR UNIFORM CARTON SIZES incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control - Centering unit RCC500 infeed - Vertical drive and guide belts - Carton size adjustment manual Dksdpfxjykugxs Ac Top - Sealing units for bottom and top - Standard version T22 / T23 - Tape width from 50 to 50 mm, depending on the unit used - Adjustable tension - Max. tape roll diameter 360 mm - Tape roll core diameter 76 mm - Power supply 400 V, 3-phase, N, PE – 50/60 Hz - Power consumption 0.25 kW - Protection rating IP54 - Operating temperature +5°C to max. +35°C - Conveyor speed 22 m/min - Average output 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm: 2,470 x 990 x 1,782 H - CE-compliant safety guard: Side sheet metal covers with access door, supplemented with infeed doors (L 850 mm), upper and lower covers. Image may show optional equipment subject to surcharge.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable Dkjdpfjyktv Ssx Ac Tjp - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2021, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S21MythoEasyLow04, Demo machine - like new. MYTHO EASY Low Very low-profile system in height Wrapping height: 2400 mm Turntable diameter: 1650 mm LP flat turntable: 30 mm flat, 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double-rope formation - see pictures. Automatic cutting Optional: film clamp on the turntable German Schuko plug 6 individually programmable programs Additional demo units immediately available from stock. Prices ex stock Ludwigsburg Djdpfjx Ta Nxex Ac Tekp

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm Dkedpfx Aoykud Roc Tep 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting Dksdpfsykuhcsx Ac Tsp F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Total connected load: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" Dkodpeyktrtofx Ac Tsp FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, de-hu-it-lt-001 Dedpfxoy Duq Ee Ac Tjkp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, a main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds of up to 80 m/min, making it ideal for precise, large-format panel sizing. Contact us for further information regarding this machine. Machine Advantages Djdpfx Ajx D N Trjc Tskp Technical Machine Advantages • Cutting length: 4200 mm / cutting width: 4200 mm / main saw blade diameter: 350 mm / max. cutting height: 72 mm / max. blade projection: 82 mm / main saw motor: 11 kW / main saw speed: 4,980 rpm / scorer saw motor: 2.2 kW / scorer saw speed: 0.55 kW / feed speed of saw carriage: infinitely variable, 0 – 80 m/min / return speed of saw carriage: 80 m/min / frequency drive for rip fence: 1.1 kW / front rip fence: infinitely variable, 0 – 25 m/min / rip fence return speed: 80 m/min / operating pressure: 6 – 8 bar / X-axis: linear guide, servo drive 80 m/min / Z-axis: linear guide, servo drive downward: 20 m/min, upward: 15 m/min • Drilling/milling unit / 14 drilling spindles (standard) / Drive: 4 kW / vertical drilling speed: 7,280 rpm / stroke: 50 mm / max. drilling depth: 45 mm / tool holder: Weldon Ø10 • Smallest workpiece: min. 80 x 250 mm / largest workpiece: max. 2650 x 2070 mm • Working travel Y: 2100 mm / working travel X: 3000 mm

Kondisi: belum diuji (bekas), Volume: approx. 6000 L Type: Upright on three legs Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank Dkjdpohg Nk Defx Ac Top

Kondisi: belum diuji (bekas), Volume: approx. 6,000 L Djdpfxshg Niqo Ac Tskp Type: Vertical, mounted on three legs Tank diameter: 2,250 mm Heatable/coolable double jacket Enamelled tank

Kondisi: belum diuji (bekas), Volume: Approx. 5,000 L Type: Vertical on three legs Dkodpehg Nlpefx Ac Tsp Tank diameter: 2,100 mm Heatable/coolable double jacket

Kondisi: bekas, berat kosong: 8.800 kg, berat muatan maksimum: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2006, suspensi: udara, kondisi ban: 80 persen, kapasitas angkut: 30.200 kg,

Kondisi: bekas, berat kosong: 9.300 kg, berat muatan maksimum: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2008, suspensi: udara, kondisi ban: 70 persen, kapasitas angkut: 29.700 kg,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, panhans-s45-EN Dodpfx Acjyhnmgj Tokp

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, model controller: DNC 80, tingkat otomatisasi: manual, 1 Dedjyxakyjpfx Ac Tjkp

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: 5257, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, arus masuk: 12 A, frekuensi input: 50 Hz, jenis arus masuk: AC (pendingin udara), ketinggian potong (maks.): 155 mm, lebar pemotongan (maks.): 1.250 mm, diameter mata gergaji: 450 mm, penyesuaian kemiringan mata gergaji: 46 °, jenis penyesuaian ketinggian: hidrolik, jenis aktuasi: listrik, panjang total: 6.750 mm, lebar total: 3.500 mm, tinggi total: 1.900 mm, Perlengkapan: Penandaan CE, de-en Dsdpfsyvk Tyox Ac Tskp

Kondisi: bekas, berat kosong: 8.800 kg, berat muatan maksimum: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2006, suspensi: udara, kondisi ban: 80 persen, kapasitas angkut: 30.200 kg,

Kondisi: baru, The SAPI Mammut sandblasting units with QUICK STOP™ device are powerful industrial sandblasting machines used across various sectors such as automotive, construction, and manufacturing. These units are designed for rapid and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature developed to prevent accidents and equipment damage. It operates by immediately stopping the blasting process as soon as the operator releases the control handle. The abrasive flow is instantly interrupted. This safety system can prevent workplace accidents and protects the machine from stress-related damage. Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-grade components, ensuring reliable performance even under the toughest conditions. All our machines are fully CE and TÜV certified. Flexibility and Versatility The machine is available in various tank sizes to accommodate different sandblasting requirements. It can be used with a wide range of abrasive materials, from standard sand to specialized plastic or metallic blasting media. Our Mammut with QUICK STOP™ is suitable for numerous applications, including surface preparation, cleaning, and the removal of rust, paint, and coatings. Dkodpfx Aceupyw Ej Tep Precision and User-Friendliness Our Mammut with QUICK STOP™ provides precise control and adjustment of blasting pressure even during operation, enabling consistent results with high accuracy. Additionally, our units feature easily accessible inspection and maintenance ports. Safety The QUICK STOP™ system, equipped with a dead man's switch, ensures maximum safety during sandblasting. QUICK STOP™ also prevents the build-up of moisture inside the machine by maintaining constant pressure, even when blasting is paused. This is not the case with conventional on/off valve technology. All Mammut sandblasting machines with QUICK STOP™ come fully equipped as standard. Our scope of supply typically includes: sandblasting hose, nozzle, pressure regulator, water separator, abrasive metering valve, and basic personal protective equipment.

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 3.000 h, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, For sale as a complete package: Waterjet cutting machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area 3000x1500mm. High-pressure pump Ecotron 40.37, year 2013 Djdpfsyq Rdyjx Ac Tjkp Water softening system, year 2018 --> as new condition Abrasive backflushing system, year 2013 Column-mounted slewing crane Abus 2t, year 2018 --> as new condition Vacuum lifting system Devo-Tech, load capacity 1800kg --> as new condition Various accessories. Several sandbags The system was acquired at the end of 2018 and commissioned at the beginning of 2019. At that time, the waterjet system and pump had been completely overhauled by the supplier. Unfortunately, the cutting system was rarely used in our company. It was run only a few hours per year. Not in operation since around July 2025. The high-pressure pump is defective; it is not leak-proof and is losing water. Both high-pressure cylinders were replaced in recent years. The last service was in 2025. According to the service engineer, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and the vacuum system can also be purchased separately. Please send an offer with your price expectation. New price in 2019 for crane and vacuum equipment was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected but has been drained and cleaned. Please send registrations or offers by email, not by phone.