Beli Pembangkit Kogenerasi Mwm bekas (145)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fuel: natural gas (NG), Engine: HMG, Space heating unit with CHP: yes, Condensing boiler: no, Auxiliary heater: no, Low-temperature boiler: no, B11 boiler: no, Combination unit: no, Rated heat input P: 88 kW, Annual efficiency of space heating system η: 136%, Energy efficiency class: A++, Usable heat output at rated heat input with auxiliary heater off/on: 87.9 kW, Thermal efficiency at rated heat input with auxiliary heater off/on: 57.5%, Electrical efficiency at heat output of space heating unit with CHP with auxiliary heater off/on: 33.5%, Auxiliary power consumption at full/partial load el: 1.132 kW, Standby power consumption P SB: 0.06 kW, Standby heat loss P stby: 0.442 kW, Annual energy consumption Q HE: 1345 kWh, Sound power level indoors L WA: 72 dB, Operating hours: 42,892 h. Water was detected in the oil circuit, the unit has an oil-related fault even though there is sufficient oil present, it also shuts down with the message 'Engine too hot'. The control unit was overhauled by the manufacturer in 2024. Regular maintenance intervals were observed for oil changes, spark plugs, valves, etc. Documentation available. Gbjdpjxc Ni Rofx Ai Aep

Kondisi: siap digunakan (bekas), A combined heat and power (CHP) plant, consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20. Generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1,500 rpm. Includes DELF synchronization, hot water outlet, table cooler, preheating, and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20. Generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1,500 rpm. Includes DELF synchronization, hot water outlet, table cooler, preheating, and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12. Generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1,500 rpm. The CHP unit has a total output of approximately 1,100 kVA. Includes table cooler, V2A heat exchanger, containers, and switch cabinets. All generators are installed in containers, allowing for easy transport. Gjdpjtwqzrofx Ai Asbp

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, frekuensi input: 50 Hz, Manufacturer: PRAMAC GDW 65 P FS3A Sound pressure at 7 m dB(A): 62 Sound power level LWA dB(A): 91 Continuous output: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: Perkins 1104D-44TG3 Emission standard: Stage IIIA – approved for stationary use only! Cooling system: Water-cooled Cylinders: 4 in-line Displacement: 4,400 cm³ Aspiration: Turbocharged Speed: 1,500 rpm Engine control: Mechanical Fuel consumption at 3/4 load: 11.73 liters Fuel consumption at full load: 15.81 liters Fuel tank capacity: 300 liters, metal tank Generator: MeccAlte ECP32 2M4 C Type: Brushless Number of poles: 4 Regulation: Electronic (AVR control) Digital controller ACP ComAp IL3 AMF25 3-pole generator circuit breaker Terminal strip Dimensions and weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,220 kg Forklift pockets accessible from two sides Integrated drip tray Gsdpfxjq A U Aqo Ai Asbp Lifting eyes for crane loading Manual battery master switch Engine pre-heating Manual engine oil extraction pump 3-way valve with bayonet quick coupling

Kondisi: bekas, Steam-heated pure steam generator with condensate cooler for feed water preheating, as well as fresh water feed via control valve. Plug-and-play pure steam generation plant, mounted on a base frame, including all piping, compressed air lines, control cabinet, and wiring. Year of manufacture: 2019 Design data: Output: 531 kW Pure steam output: 700 kg/h Pure steam pressure: 0.8 bar Feed water temperature: 15 °C Min. feed water pressure: 2.0 bar Heating steam pressure: 4.0 bar Gedpfxowgkyho Ai Asbp Heating steam consumption: 700 kg/h Documentation and operating manual available. Please feel free to contact us if you are interested.

Kondisi: bekas, Tahun pembuatan: 2008, Kami menawarkan unit pembangkit listrik tenaga panas dan listrik terintegrasi (CHP) MTU dengan daya listrik 1,2 MW untuk dijual. Spesifikasi teknis: Pabrikan: MTU Mesin: MTU 12V4000L62 Generator: Stamford Tahun pembuatan: 2008 (overhaul total pada 2015) Gbodpsxcwlajfx Ai Aop Jam operasi: 63.000 Termasuk panel kontrol Termasuk pendingin tipe meja

Kondisi: bekas, daya: 24 kW (32,63 hp), warna: kuning, Tahun pembuatan: 1996, jam operasional: 11.776 h,

Kondisi: bekas, Schleifmaschinen ohne Spitzen SASL 125 1A, 200x300, 125x250, KCH 63 Gsdpfxocup D Ne Ai Asbp

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Gsdjx Afpaspfx Ai Aobp Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 500 mm Table size: 2230 x 670 mm Clamping surface of table: 1340 x 400 mm Magnetic chuck size: 1000 x 410 mm Table load capacity: 450 kg Spindle head overhang: max. 330 mm Grinding spindle speed: 1,440 rpm Total power requirement: 18.2 kW Machine weight approx.: 3.5 t (machine only) Machine dimensions (LxWxH): approx. 1.9 x 3.3 x 2.25 m Control cabinet dimensions (LxWxH): 1.0 x 0.4 x 1.4 m Precision surface grinding machine Possible surface grinding operations: - Cross grinding; plunge grinding; face grinding and grinding with straight grinding track Further details: - Table speed hydraulic, infinitely variable 1...30 or 2...30 m/min - Maximum table stroke 1150 mm - Cross feed manual 0.01 mm - Vertical infeed by hand 0.002 mm, minimum hand infeed 0.001 mm - Automatic infeed 0.001...0.1 mm - Maximum selectable total infeed 5.0 mm - Coolant system (tank with pump) - Hydraulic unit - Control cabinet

Kondisi: bekas, Hydraulic power unit, hydraulic pump, universal hydraulic unit, hydraulic station - Manufacturer: MW Märkisches Werk, hydraulic power unit with reservoir - Type: 1324 - Shaft: 12 x 8 mm, see technical drawing photo - Individual components: see photos - Dimensions: 280/270/H450 mm - Total weight: 9.8 kg Gbodpfehv S Ezjx Ai Ajp

Kondisi: hampir baru (bekas), CNC-Vertikal-Bohrwerk WMW MIKROMAT Verfahrweg X: 1.120 mm Verfahrweg Y: 710 mm Gbsdpjzg Hyujfx Ai Aep Spindelhub Z: 315 mm Verfahrweg W: 630 mm Numerische Steuerung: CNC NUM 1060 Spindel: Ø 125 mm Aufnahme: SA40 Drehzahlbereich: 36 bis 2.240 U/min Tischgröße: 1.400 x 900 mm Abstand zwischen den Ständern: 1.080 mm Max. Abstand Spindelstirn/Tisch: 0 bis max. 900 mm Max. zulässige Tischbelastung: 1.000 kg Getrenntes Schaltschrank Maschine 2000 mit CN NUM 1060 modernisiert Spannung: 380 V Abmessungen (L x B x H): 4.000 x 2.460 x 3.030 mm Gewicht: ca. 9 t

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390/455 mm Cross feed: 0.3–3.5 mm Table traverse: longitudinal 1150 mm Table speed: 2.5–25 m/min Table size: 2120 x 600 mm Magnetic chuck size: 1000 x 315 x 100 mm Table clamping surface: 1160 x 315 mm Grinding spindle feed: 0.002 – 0.05 mm Distance table to spindle center: max. 550 mm Overhang of the spindle head: 200–580 mm Grinding spindle speed: 1500 / 3000 rpm Gjdpou Nggzjfx Ai Asbp Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. LxWxH: 1.3 x 1.4 x 1.95 m Coolant system dimensions LxWxH: 0.7 x 0.7 x 0.55 m - Coolant system (tank with pump) - 2 grinding wheel mounts - 4 machine feet as per manufacturer’s specification.

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Godpju Ix Hqefx Ai Ajbp Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, en-001 Gedpfsvadd Ijx Ai Ajbp

Tahun pembuatan: 1963, Kondisi: bekas, Technical Details: Ram stroke - max.: 150 mm Workpiece diameter - max.: 250 mm Keyway width: 50 mm Feed rate: 10 m/min. Stroke adjustment: yes mm Voltage: 380 V Worktable: Ø 250 mm Total power requirement: 6.0 kW Gsdpou Ng T Uefx Ai Ajbp Machine weight approx.: 1.05 t Machine dimensions approx. LxWxH: 1.2 x 0.8 x 1.6 m Application: For internal keyway machining of flanges Broaching tool (drawbar) specifications: - Total length = 650 mm - Width = 10; 20; 30; 50 mm - Broaching length = approx. 150 mm Lubrication is provided via the drawbars. Equipment e.g.: 4x various drawbar guides (5; 22; 32 and 50 mm) 50x various flange adapters 23x broach holders shaft 18 mm; 12x shaft 22 mm; 7x shaft 26, 30, 40 and 45 mm Accessories included, see photo for details i.D.

Kondisi: bekas, Technical details: z-axis travel: 400 mm Spindle speed range: up to 3,000 rpm, stepless Feed, stepless: not specified Quill stroke, vertical: 100 mm Spindle taper: MT2 Table surface: 445 x 315 mm Gsdpfx Ajv A S Efji Asbp Distance table to spindle underside: max. 520 mm Table travel (longitudinal): 250 mm Table travel (cross): 330 mm Table height above floor: 920 mm Total power requirement: 1.6 kW Machine weight approx.: 1,500 kg Machine dimensions LxWxH: 1.3 x 1.1 x 2.0 m Application: Milling and drilling of elongated holes Fine depth indicator gauge mounted on the drilling spindle head. 5x T-slots according to DIN 650: a=10; h=18; b=18; c=8 mm Equipment: Two-axis digital display ACU-RIDE

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Saya dengan senang hati akan menambahkan data teknis ke dalam dokumen untuk Anda. Mesin Pembuat Roda Gigi (Gear Hobbing Machine) Konvensional Negara asal: Jerman Spesifikasi teknis Detail: - Diameter roda maksimum: 500 mm - Lebar roda gigi: 250 mm - Modul maksimum: 5 - Kebutuhan daya total: 2,2 kW - Berat mesin: sekitar 1.920 kg - Dimensi mesin: sekitar 2.500 x 1.600 x 1.900 mm - Diameter pisau potong maksimum: 250 - 285 mm - Diameter meja penjepit: 460 mm - Lubang meja: 70 mm Gbjdpfxozc Tkys Ai Ajp Aksesori: - Beragam Unit kontrol: - Konvensional Informasi tambahan

Kondisi: bekas, THREAD ROLLING MACHINES VEB WMW GWR 80GR WITH EXTENSIVE TOOLING Godjig Txmspfx Ai Aobp

Kondisi: bekas, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Gjdpfx Aisu Ngn So Asbp Workpiece height: 390 mm Table speed: 2.5–25 m/min Table clamping surface: 250 x 1000 mm Distance table to spindle center: 550 mm Grinding wheel dimensions: max. Ø 315 x 13–63 x bore Ø 75 mm Control voltage: 220 V / 50 Hz Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 3.35 x 1.5 x 2.10 m The machine is currently located in the technical department.

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm Gbedpfxsv T Nqao Ai Asp - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Kondisi: bekas, Tahun pembuatan: 1989, Wheel diameter – max. 400 mm Wheel width 275 mm Module – max. 6 Machine dimensions 300x310x245 cm Machine weight approx. 5.0 t Specification: - Maximum wheel diameter: 400 mm - Minimum module: 1 - Maximum module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter support: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Steplessly adjustable axial feed: 0.2-10 mm/rev - Stepless tangential feed: 0.1-5 mm/rev - Radial feed for spur gears: 0.1-4 mm/rev - Radial feed for worm wheels: 0.025-1 mm/rev - Rapid traverse, axial: 500 mm/min - Rapid traverse, tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm wheels: 100 mm/rev - Motor power: 7.4 kW Weight - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (standard): 2950 mm with DC drive: 3350 mm - Width: 3100 mm - Height of machine: 1980 mm Electrical cabinet approx.: 2400 mm Gbsdpfju A I Elex Ai Asp Machine with DC drive approx.: 2150 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1971, Diameter maks: 800 mm Gjdpey Ru D Sefx Ai Ajbp Modul: 10

Kondisi: bekas, Tahun pembuatan: 2015, Technical details: Gbjdpfxol Ha Ubs Ai Aep Machine weight approx.: 4 t

Kondisi: baik (bekas), Tahun pembuatan: 1963, 3 mesin press eksentrik berbeda, prod. WMW 1 x press engkol dengan satu batang penekan 16 t 1 x press engkol dengan satu batang penekan 25 t Gsdpomi Rpiefx Ai Aebp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: fungsi terbatas, daya motor spindle: 60 W, panjang pembubutan: 9.000 mm, diameter putar di atas sled silang: 1.400 mm, kecepatan spindel (maks.): 160 rpm, diameter pembubutan: 1.600 mm, berat keseluruhan: 35.500 kg, kecepatan rotasi (maks.): 160 rpm, kecepatan rotasi (min.): 1 rpm, lebar total: 2.000 mm, panjang total: 12.000 mm, panjang kerja: 10.000 mm, berat benda kerja (maks.): 16.000 kg, diameter pembubutan di atas alas geser: 1.600 mm, daya: 60 kW (81,58 hp), masa garansi: 12 bulan, Mesin dalam kondisi seperti baru dengan CNC, proses retrofit sedang berlangsung. Dibuat pada tahun 1990, memiliki jam kerja sangat sedikit karena penutupan pabrik. Perlengkapan sepenuhnya dimodernisasi: sistem listrik, elektronik, hidrolik, kabel, rantai portabel; CNC baru (Edisi 2025). Secara mekanis seperti baru, dapat diperiksa secara menyeluruh. Sebagian dibongkar karena keterbatasan ruang, sebagian masih beroperasi hingga instalasi selesai. Dapat diperiksa kapan saja, cocok untuk penggunaan industri berat. Untuk informasi teknis lebih lanjut, silakan kirim permintaan. Harga: penawaran atas permintaan. Pengiriman/instalasi: opsi transportasi dan penawaran instalasi tersedia atas permintaan. Uji coba saat pengiriman: tersedia Garansi: 1 tahun untuk mekanik, listrik, hidrolik; 2 tahun untuk peralatan CNC. Gbodpjygk I Djfx Ai Asp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Kapasitas pengeboran pada baja: 50 mm Jarak sumbu: 30 - 1650 mm Tinggi benda kerja maks.: 940 mm Jarak gerak horizontal kepala bor: 1300 mm Pegangan spindel: MK 5 Langkah spindel bor: 360 mm Gjdpfx Aijxl Tqqj Asbp Kecepatan spindel: 31,5 - 1400 rpm dalam 12 langkah Berat: 3,8 t