Beli Ruchser Stasiun Perakitan Jendela bekas (2.547)

Kondisi: bekas, Condition: Used - Compatible Machine: EDGE BANDER - If interested, we offer an overhaul service; please contact us. Nedpfx Akevazxcoasld

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0010811 - Manufacturer Code: OLA31-03/S - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment services; please contact us. Nlsdpfx Akov Iz Tieajd

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Spesifikasi (Lihat Detail di atas untuk opsi yang terpasang) *Assembleon Philips Topaz CPH Kecepatan penempatan optimal: 14.000 komponen per jam (cph) dengan pengambilan simultan Kecepatan penempatan nominal: 9.000 - 11.000 cph *Komponen yang Berlaku: 0402 - SOP, SOJ, PLCC 25 mm (1,0") dengan kamera sensor garis QFP 21 mm dengan jarak antar pin hingga 0,65 mm (25 mil), sistem kamera sensor garis QFP 32 mm (1,26") dengan jarak antar pin hingga 0,5 mm (20 mil), sistem kamera CCD area opsional *Tinggi komponen maks.: 6,5 mm *Akurasi pemasangan Philips Topaz: (x,y) 3s 0,08 mm untuk chip dan SOIC, sistem kamera sensor garis 0,06 mm untuk QFP, menggunakan kepala presisi dan sistem kamera CCD area opsional *Sudut pemasangan: 0 hingga ± 180 (dengan interval 0,01) *Sistem perataan: Kamera sensor garis dengan sistem lampu depan untuk pemrosesan gambar *Vision-on-the-Fly* oleh sistem visi eksklusif VICS 2500 -Kamera sensor garis kedua untuk sisi belakang bersifat opsional -Kamera CCD area untuk komponen dengan jarak antar pin yang kecil, bersifat opsional -Kamera CCD area untuk perataan titik referensi, standar *Jenis nosel: Tipe 31 Tipe 31-1 (hanya kepala presisi, dengan pegas) Tipe 32-2 Tipe 33 Tipe 34 Tipe MELF -Jenis nosel untuk Topaz dan Emerald sama. *Stasiun penggantian nosel: 12 posisi nosel, opsional (nosel tidak termasuk) *Jumlah kepala: Satu berkas tunggal dengan 8 nosel yang dapat diganti, termasuk satu kepala presisi *Metode penggerak kepala pemasangan: Pneumatik atau dikendalikan servo untuk kompensasi tinggi komponen *Jumlah pengumpan pita: 8 mm: 100 posisi 12 mm: 48 posisi 16 mm: 48 posisi 24 mm: 32 posisi 32 mm: 32 posisi 44 mm: 24 posisi 56 mm: 18 posisi Pengumpan batang: Tergantung pada dimensi batang Pengumpan massal: 100 x 8 mm Spesifikasi Umum *Pengemasan Komponen: Pita sesuai dengan IEC/EIA-J/JEDEC: 8-56 mm, diameter gulungan pita maks.: 380 mm (15") *Pengumpan baki manual: Ukuran baki maks. 320 mm x 320 mm (12,6" x 12,6") Opsional: Pengumpan baki manual *Pengumpan Baki Manual Tetap: Ukuran baki maks. 635 mm x 136 mm (25" x 5,3") Opsional: Pengumpan baki manual tetap (ukuran papan maks. 250 mm (10")) -Opsional 558 mm x 508 mm (22" x 20"). *Ketebalan PCB: Min. 0,6 mm (0,02") Maks. 3,0 mm (0,12") Nedpfx Aksznmfaoaeld *Area yang tidak dapat dipasang: -Sisi atas papan: 3 mm dari tepi papan sisi belakang (0,12") 0 mm dari tepi papan sisi depan 3 mm di sekitar lubang referensi (0,12") (lokasi pin) Pembatasan tinggi komponen berlaku di area 10 mm (0,4") dari tepi sisi depan, tergantung pada ketebalan papan -Sisi bawah papan: 5 mm dari tepi papan sisi depan dan belakang (0,2") Untuk papan keramik (opsional), area yang tidak dapat dipasang mungkin berbeda *Material PCB: Fenolik/FR4/Material Komposit, papan keramik memerlukan bagian konveyor khusus (opsional) *Posisi PCB: Fiksasi pin dapat disesuaikan Pin yang didorong ke atas dapat disesuaikan Penjepitan tepi dapat disesuaikan Penyangga (buffer tunggu PCB) dapat disesuaikan *Tinggi transportasi PCB: 900 mm ± 10 mm (35,4" ± 0,4") Standar SMEMA 953 mm ± 12,5 mm (37,5" ± 0,5") Standar *Rasio lebar/panjang PCB: Maks. 1:3 *Dimensi dan berat Mesin Philips Topaz: Panjang: 1655 mm (5,4 kaki) Tinggi: 1865 mm (6,1 kaki) Lebar: 1358 mm (4,5 kaki), lebar termasuk pengumpan 2194 mm (7,2 kaki) Berat: 1150 kg (2535 Lbs)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Welding station besteht aus folgenden Hauptkomponenten: 1. XYZ-Roboterschweißportal 2. Positionierer 3. Roboter-Ausstattung 4. Schweißausrüstung 5. Energieversorgungseinheiten Njdowzg E Aopfx Akaeld 6. Steuerpult

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Gaya tekan 28 kN Tekanan operasi minimum/maksimum 3 / 6 bar Langkah 12 mm Sambungan listrik 220 Volt Jangkauan 130 mm Nledpfxozmxato Akajd Meja 200 x 150 mm

Kondisi: siap digunakan (bekas), Mahr Marshaft MAN 400, unit pengukuran poros manual, mesin pengukuran poros, mesin pengukuran. Mahr Marshaft MAN 400: Rentang pengukuran panjang: 400mm Tahun pembuatan: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Tahun pembuatan: 2014 Tahun pembuatan: 2016 Tahun pembuatan: 2011 Tahun pembuatan: 2011 Anda dipersilakan untuk datang dan melihat langsung. Kami dengan senang hati akan mengatur layanan pengiriman dengan harga terjangkau untuk Anda! Anda akan menerima faktur yang sah. Untuk pelanggan asing, faktur bersih juga dapat dibuat. Syaratnya adalah memiliki nomor identifikasi PPN yang valid. Penjualan dapat terjadi sewaktu-waktu. Nlodpfozmr D Ejx Akaod Kunjungi toko kami dan lihat juga penawaran lainnya. Nama perusahaan dan merek dagang yang disebutkan adalah milik pemiliknya dan hanya digunakan untuk identifikasi dan deskripsi produk. Perbedaan dalam data teknis serta kesalahan dalam deskripsi barang dapat terjadi dan tetap menjadi hak kami.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, gaya penekanan: 135 t, Hidrobrasil Laboratory Press – 10–135 t – 1,100 × 650 mm – with Auxiliary Cylinder For sale is a hydraulic laboratory and assembly press by Hidrobrasil, equipped with a main cylinder offering 10–135 t of pressing force and an integrated auxiliary cylinder for sensitive operations up to 7 t. This machine is ideally suited for precise assembly, testing, and press-fitting processes, where both high force and precisely metered loads are required. Nlsdpfx Asigg E Hekaed ==== Technical Data & Information: Hydraulic Laboratory Press – 10–135 t ==== General Information - Manufacturer: Hidrobrasil - Model: Laboratory Press - Machine Type: Assembly Press - Design: Hydraulic press with auxiliary cylinder - Main Cylinder Force: 10–135 t - Auxiliary Cylinder Force: 1.5–7 t - Machine Weight: approx. 2.3 t - Overall Height: 2,900 mm ==== Working Area - Table Size: 1,100 × 650 × 120 mm - Max. Open Height: 800 mm - Table Height: max. 900 mm - Stroke / Travel: 400 mm ==== Speeds - Rapid Traverse: 2–10 mm/sec - Pressing Speed: 2 mm/sec ==== Hydraulics & Drive - Tank Capacity: 200 l - Pump Output: 60 l/min - Motor Output: 5 kW ==== Control & Safety - Control System: Siemens S7-1200 - Safety Technology: SICK - Remote Maintenance Module: included ==== Applications & Features - Combination of high pressing force and sensitive auxiliary cylinder - Ideal for assembly, testing, and laboratory applications - Precision control for delicate components ===== Assembly, testing applications, laboratory operation, fine pressing, press-fitting operations Hydraulic press, lab press, assembly press, test stand press, press-fit press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in custom machinery manufacturing and press automation. We offer bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, components from leading European manufacturers are predominantly used.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 30 t, lebar meja: 600 mm, panjang meja: 600 mm, panjang total: 1.869 mm, lebar total: 850 mm, tinggi total: 2.620 mm, berat keseluruhan: 2.900 kg, Hidrobrasil C-Frame Hydraulic Press – 30 t – 600 × 600 mm – 400 mm Stroke For sale is a compact C-frame hydraulic press manufactured by Hidrobrasil, offering 30 t pressing force. This machine features a table size of 600 × 600 mm and is ideally suited for assembly, straightening, and pressing operations, as well as for small batch production in workshop and industrial environments. ==== Technical Data & Information: Hydraulic C-Frame Press – 30 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame (single-column) - Machine designation: Assembly press Njdpfxovhcykj Akaeld - Pressing force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind the table plate: 50 mm - Table mounting points: 600 / 800 / 1000 mm ==== Speeds - Downstroke speed: 10 mm/sec - Return speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly work, pressing operations, straightening work, workshop applications, small-batch production Hydraulic press, C-frame press, single-column press, assembly press, industrial press

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 10 t, Single-column press – Manufacturer: Hidrobrasil – 10 t assembly press – table 600 × 300 mm For sale is a compact hydraulic single-column press (C-frame design) from Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous operation and is ideally suited for assembly, pressing-in, and light forming operations in workshop and production environments. ==== Technical data & information: Hydraulic single-column press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press / Assembly Press - Design: C-Frame Press / Single-Column Press - Pressing force: max. 10 t (100 kN) - Pressure range: 0.5 – 10 t adjustable - Machine weight: approx. 1.6 t - Dimensions (L × W × H): approx. 1,100 × 600 × 2,850 mm - Table height: 850 mm - Operating sides: 1 ==== Working Area - Max. opening width: 800 mm - Stroke: 500 mm - Minimum opening: 300 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pump: Gear pump, approx. 6 l/min - Oil capacity: approx. 80 l (HLP 46) - Oil temperature: max. 55 °C - Ambient temperature: max. 40 °C ==== Drive & Electrics - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary knob - Cable remote control for up and down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double lacquered ==== Construction & Safety - Designed as an oil-hydraulic single-column press - Complies with current UVV and EU directives ==== Assembly work, press-fit operations, small batch production, workshop applications, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool try-out press Nljdpfx Aohma Smskajd Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quotation. Our hydraulic presses are manufactured according to the German Machinery Directive as well as European machinery directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements since they comply fully with the Brazilian national safety guideline NR 12, which is based on these standards. Our major strengths are custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 10 t, Single Column Press – Manufacturer Hidrobrasil – 10 t Assembly Press – Table 600 × 300 mm For sale is a hydraulic single column press (C-frame) from Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous operation and stands out due to its robust construction, reliable hydraulic components, and versatile application options for assembly and pressing processes. ===== Technical Data & Information: Hydraulic Single Column Press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single Column Press / Assembly Press - Design: C-Frame Press / Single Column Press - Pressing force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Operator sides: 1 ==== Working Range - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) ==== Drive & Electrics - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary knob (0.5 – 10 t) - Cable remote control for up and down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double lacquered ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Construction & Safety - Robust machine body according to DIN 8651 - Cylinder induction-hardened and chrome-plated - CE certificate available - Documentation in German - Low-maintenance and reliable - Compliant with current EU directives ===== Assembly work, pressing operations, small series production, workshop applications, light forming technology Single column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, tool testing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your requirements? Njdpfxjhaqygs Akaeld Contact us for a customised offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. In addition, our presses surpass Canadian and European safety requirements, as they fully comply with the national Brazilian safety directive NR 12, which is based on these standards. Our great strength lies in custom machine construction and press automation. We offer tailored hydraulic presses at surprisingly competitive prices. Our presses predominantly use components from leading European manufacturers for the hydraulics.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale: a compact single-column straightening press (C-frame) from the manufacturer Durendus, model DCS-20, featuring an adjustable pressing force from 5 to 20 t. The machine is equipped with a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fitting tasks. ==== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) Nljdsyghvfspfx Akasd ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Rapid approach speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic manifold / valves: Hydropack - Filter: Filtrec - Oil level monitoring: Electronic oil level sensor - Hydraulic unit: mounted at the rear, top - Pressure accuracy: ± 5 bar ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening tasks, assembly operations, press-fit applications, workshop use, maintenance, small batch production Straightening press, single-column press, C-frame press, hydraulic press, shop press, press-fitting press Looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are built according to both German and European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these standards. Our key strength lies in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. Only top-quality hydraulic components from leading European manufacturers are used in our presses.

Kondisi: bekas, 2 slot spindles Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window processing line, optionally with extensive tooling ----- Nsdpfx Ajzawizekasld Options available (with extra cost) IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 front doors Technical manufacturer description: ----- Item 1: Weinig Unicontrol 10 NC window processing line ----- Cut-off saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for edge rounding from above Horizontal corner rounding unit (bottom) ----- Axial movement mechanically connected to the cut-off saw 1st tenoning & slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial movement: NC axis Base position below table: 5-10 mm Radial movement: fixed 2nd tenoning & slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial movement: NC axis Radial movement: NC axis Base position below table: 5-10 mm 1st profile spindle (climb & counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Horizontal profiling unit (top) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool diameter: 130 mm Adjustment pneumatically in 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Vertical profiling unit, right at machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Max. tool diameter: 210 mm Adjustment pneumatically in 8 axial and radial positions Further accessories -----...

Kondisi: bekas, Tahun pembuatan: 2011, Panjang 5000 mm Lebar 100 mm Tinggi 2800 mm Tahun Pembuatan 2011 Range + Heine Foerdertechnik dengan sistem penyemprotan elektrostatik Airless dari Reiter. Lini pelapisan dan pengecatan industri otomatis penuh untuk jendela kayu, rangka jendela, pintu, dan elemen kayu. Dijual berdasarkan pesanan pelanggan. ----- Deskripsi Teknis dari Produsen (Ringkasan): Pos. 1 Teknologi Konveyor: Konveyor melingkar Power + Free, penggerak yang dikendalikan frekuensi, penyangga, stasiun berhenti, rangka, konstruksi baja sesuai dengan tata letak. Pos. 2 Sistem Pelapisan: flowcomat II-P untuk pelapisan dasar / pra-perlakuan. Pos. 3 Teknologi Penyemprotan: Sistem penyemprotan Airless elektrostatik Reiter MAE 7-059 dengan peralatan penyemprot otomatis. Pos. 4 Teknologi Pengangkatan: Perangkat pengangkat mekanis MH2T, rentang pengangkatan sekitar 3.200 mm. Pos. 5 Penyediaan Material: Penyediaan cat bertekanan tinggi, penyediaan material terisolasi, pergantian cat, sistem perpipaan melingkar, penyediaan cairan pembilas. Pos. 6 Sistem Kontrol: Nljdpfx Akjy Ty E Hoasd Siemens S7-300 untuk teknologi konveyor dan sistem kontrol Reiter dengan pengenalan komponen dan suplai tegangan tinggi. Pos. 7 Dokumentasi (tersedia sebagai tambahan): Konfirmasi pesanan Range + Heine, rencana tata letak, konfirmasi pesanan Reiter dan deskripsi teknis tersedia. ----- Data Teknis Utama: Komponen: Jendela kayu, rangka jendela, pintu Panjang komponen: Hingga sekitar 5.000 mm Tinggi komponen: Hingga sekitar 2.800 mm Kapasitas: Sekitar 60 unit jendela per shift Sistem cat: Sistem berbasis air / rendah VOC Sistem kontrol: Siemens S7-300 Elektrostatik: 100 kV / 1 mA ----- Harga mesin di atas tersedia berdasarkan permintaan! ----- Data dan informasi teknis lebih lanjut tersedia dalam lampiran PDF! ----- (Spesifikasi teknis sesuai produsen - tanpa jaminan!) Semua harga yang tertera adalah harga bersih, ditambah PPN sesuai ketentuan.

Kondisi: bekas, Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm Nodpoyq Sztefx Akajld - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...

Kondisi: baru, de-hu-it-lt Nodpfxjyrtyye Akasld

Kondisi: hampir baru (bekas), jam operasional: 250 h, SHI Machines Type: BlueBox Virtually as new with only 250 operating hours! Technical data: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories etc.: 1 coupling 120 – steel, incl. adapter Coupling size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x coupling steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter assembly tool Coupling 120 – CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter assembly tool CISPR 25 test bench made of wood on castors for EMV-BlueBox 120 Size 2500 x 1000 x 900 mm Nedpfx Akjy Tg R Neaold Load capacity of up to 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data, all information is provided without liability!) For further questions, please do not hesitate to contact us by phone.

Kondisi: bekas, Tahun pembuatan: 2012, Pusat manufaktur jendela SAC F4TL dirancang untuk memenuhi persyaratan produksi jendela modern. Pusat ini memungkinkan manufaktur yang sangat efisien dan berkualitas tinggi dengan waktu persiapan minimal dan tanpa perlu penggantian alat. Setelah proses pemesinan, benda kerja secara otomatis dikembalikan ke operator. Pusat Manufaktur Jendela CNC SAC F4TL – Unit Pemesinan Sisi Pembentukan Lubang Pasak 1. Kereta pembentukan lubang pasak 2. Unit pemotongan ujung 3. Spindel pembentukan lubang pasak Sisi Pembentukan Profil 4. Spindel pembentukan profil pertama 5. Spindel pembentukan profil kedua 6. Unit pemotongan alur untuk profil kaca 7. Unit pemotongan alur untuk perangkat keras (opsional) Sistem Pengumpanan Sisi Pembentukan Lubang Pasak 1. Kereta pembentukan lubang pasak • Kecepatan pemesinan: 3–10 m/menit • Kecepatan kembali: 45 m/menit • Ukuran meja: 290–955 mm • Daya motor: 1,1 kW • Sudut kemiringan pagar: ±60° 2. Unit pemotongan ujung • Diameter mata gergaji: 400 mm • Diameter lubang: 30 mm • Daya motor: 3 kW 3. Spindel pembentukan lubang pasak • Kecepatan penyesuaian vertikal: 5 m/menit • Diameter spindel: 50 mm • Panjang spindel: 620 mm • Jarak gerakan vertikal: 565 mm • Daya motor: 7,5 kW • Diameter alat maksimum: 350 mm Sisi Pembentukan Profil 4. Spindel Pembentukan Profil Pertama • Kecepatan penyesuaian vertikal spindel: 5 m/menit • Diameter spindel: 50 mm • Panjang spindel: 320 mm • Jarak gerakan vertikal spindel: 295 mm • Penyesuaian horizontal spindel: 60 mm • Arah putaran spindel: kiri/kanan • Daya motor: 7,5 kW • Diameter alat maksimum: 240 mm 5. Spindel Pembentukan Profil Kedua • Kecepatan penyesuaian vertikal spindel: 5 m/menit • Diameter spindel: 50 mm • Panjang spindel: 320 mm • Jarak gerakan vertikal spindel: 295 mm • Penyesuaian horizontal spindel: 60 mm • Arah putaran spindel: kanan • Daya motor: 7,5 kW • Diameter alat maksimum: 240 mm 6. Unit Pemotongan Alur untuk Profil Kaca • Diameter mata gergaji: 200 mm • Lubang mata gergaji: 30 mm • Penyesuaian horizontal spindel: 60 mm • Daya motor: 2,2 kW Unit Opsional 7. Unit Pemotongan Alur untuk Perangkat Keras • Daya motor: 3 kW • Diameter spindel: 30 mm • Panjang spindel: 100 mm • Penyesuaian horizontal spindel: 60 mm • Penyesuaian vertikal spindel: 60 mm • Dikontrol CNC dengan 2 posisi vertikal (perbedaan maksimum: 60 mm) • Diameter alat maksimum: 190 mm Sistem Pengumpanan • Kecepatan pengumpanan: 4–20 m/menit • Penjepitan benda kerja secara pneumatik Kontrol dan Perangkat Lunak CNC • Monitor LCD berwarna 17" • Papan tombol alfanumerik 102 tombol • Sistem operasi: Windows XP Professional Opsi • Unit pemotongan alur untuk perangkat keras • Penghenti yang dikontrol NC dengan motor • Konveyor rol pengembalian • Set alat Leitz IV 69 Nedpfx Aozl D Dnokaold • Set alat Leitz IV 90 Mesin ini ditawarkan untuk dijual atas nama pelanggan. Pemeriksaan dapat dilakukan dengan perjanjian sebelumnya. Silakan hubungi kami melalui sistem perpesanan platform untuk informasi lebih lanjut dan detail kontak teknis yang relevan.

Kondisi: bekas, Slot spindle 1 0 Number of milling units: 2 pcs. Spindle diameter: 40, 50 mm Nodpfx Akjy T R Tboaold Pos. 1: Okoma angle combination UF1 S and Pos. 2: Profile wrapping machine UF2 EG including Pos. 3: Tooling for IV78 wood, IV78 wood front doors, IV78 wood-aluminium windows Gutmann with straight and angled cheek For sale on behalf of customer --- Technical manufacturer’s description: Pos. 1: Okoma UF 1 S slotting and profiling machine - Profile wrapping machine --- Compact, heavy-duty window production unit in cast construction, consisting of: Crosscut saw operating from above with 12-position turret stops, positively guided saw guard for accident prevention Slot spindle 40 mm diameter x 252 mm, double stroke for 3 tool positions (stroke height 83 mm), 7.5 kW motor Roller table adjustable on both sides 0-60 degrees automatic feed with various infinitely adjustable speeds, double pneumatic clamping, length stop LAS 3-way system 2300 mm automatic transfer to profiling unit profiling spindle 40 mm diameter x 252 mm pneumatic stroke 112 mm (adjustable) for 2 tool positions 7.5 kW motor, spindle horizontally adjustable to tool run-off edge front milling fence jaw adjustable glazing bead saw with 3 kW motor with 4-position turret head setting, heavy-duty articulated feed, infinitely adjustable 0-25 m/min, roller groups swiveling inwards and outwards stop with 5-position turret head frame milling device --- Pos. 2: OKOMA Profile Wrapping Machine Model UF 2 EG --- Energy data: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: air demand: 13 NL/cycle, pressure: 8 bar treated air: as per Pneurop 6611 1. Profiling spindle 1: - Spindle arrangement: right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: climb and counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - ‘U’ movement of profiling spindle - Vertical positioning Drive: pneumatic cylinder 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder forward-back Position indicator: limit switch - Automatic plunge: Plunge speed adjustable for clean profiling - Safety/extraction hood with connection spigot 140 mm diameter 2. Profiling spindle 2: - Spindle arrangement: right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: counter rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - ‘U’ movement of profiling spindle - Vertical positioning Drive: pneumatic cylinder 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder forward-back Position indicator: limit switch - Safety/extraction hood with connection spigot 140 mm diameter 3. Fitting milling device EG: - Spindle arrangement: right - Drive: three-phase motor 3 kW - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: none - Horizontal positioning Drive: pneumatic cylinder forward-back Position indicator: limit switch (rear only) - Safety and extraction hood with connection port 80 mm diameter Stop: - 1st stop: in front of spindle 1, manual chip removal, quick adjustment via parallelogram - 2nd stop: between spindles ...

Kondisi: sangat baik (bekas), Pengangkat mesin hanya digunakan sesekali dan berfungsi sebagai cadangan. Pemeriksaan terakhir oleh GKS dilakukan pada bulan November 2022. Njdpfx Akjzmdr Isasld

Kondisi: baru, Eine Doppelblattsäge, die speziell für das präzise Ablängen von Glasleisten entwickelt wurde, mit der Möglichkeit für gerade oder Gehrungsschnitte. Die Maschine verfügt über zwei übereinander angeordnete Arbeitsebenen, sodass zwei Leisten gleichzeitig geschnitten werden können. Während des Schneidvorgangs werden die beiden Leisten vorne durch pneumatische Spannvorrichtungen sicher fixiert. Die Längeneinstellung erfolgt über ein Handrad, das den linken Sägekopf relativ zum feststehenden rechten Sägekopf bewegt; die Länge kann einfach von der mechanischen Digitalanzeige abgelesen werden. Nljdpfx Asdy Hqvokajd Min./Max. Schnittlänge: 150mm - 2400mm Max. Schnittbereich bei 90°: 55 x 100mm Max. Schnittbereich bei 45°: 40 x 100mm 2 x Sägeblätter Ø220mm mit 30mm Bohrung Motor: 1,6 PS, 3-phasig CE-Sicherheitsanforderungen

Kondisi: baru, Vorrichtung zum Heben und Wenden ("Schmetterlings") für das Aufrichten von Paneelen aus horizontaler in vertikale Position oder zum Wenden der Paneele, um die Montage von Dämmung oder das Nageln beider Paneel-Seiten zu ermöglichen. Ein Paar hydraulisch betriebener Tische (auch als Schmetterlingstische bekannt) ermöglicht das Aufrichten der Paneele in die Vertikale, das Umsetzen auf den zweiten Tisch und das sichere Absenken auf die gegenüberliegende Seite zur Dämmstoffmontage und Schließung des Paneels. Optional können pneumatisch betätigte, ausfahrbare Leerlaufrollenbahnen in die Tische integriert werden, um das Be- und Entladen der Paneelen zu erleichtern. Nsdsdzc Rfspfx Akaeld Das hydraulische Heben der Tische erfolgt über Tasterbedienung. 3,5 kW Motor 6 m Standardlänge (optional 12 m) 4 m maximale Paneelhöhe Optionale Seiten- und Endanschläge für die Bodenkassettenmontage

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C-13-309-02, tegangan masuk: 400 V, berat keseluruhan: 900 kg, Take advantage of this opportunity to acquire a high-quality used Carat grinding & polishing station: This set includes one control cabinet and two precision polishing machines, equipped with robotic interface for maximum efficiency. Perfect for professional industrial applications. Matching robots can be offered separately. Year of manufacture: 05/2013 Overall height: 240 cm Compressed air: max. 6 bar Rated current: 11.5 A Nodpfx Aksuzycteajld Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Kondisi: sangat baik (bekas), Trumpf Nlsdpfoziiuyjx Akajd Type: TruMark 3000 Laser marking station Wavelength: 1064 nm Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Tahun pembuatan: 2011, Kondisi: baik (bekas), Kami menjual konveyor Asys ARS 01 kami (dilengkapi dengan pemindai). Kondisi: sangat baik ARS 01 Tahun pembuatan: 2011 Nlsdpfx Akozlxc Sjajd Nomor seri: 040354

Kondisi: bekas, Tahun pembuatan: 2012, Printer seri Accela dalam kondisi bekerja. Silakan minta informasi tambahan! Njdpjywi Rtjfx Akajld