Beli Sç 101 S Mesin Las Sudut Tunggal Pvc bekas (115.834)

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 4.750 h, Loader putar Atlas Atlas 75 S Tahun pembuatan: 2006 Jam operasi: sekitar 4.750 jam Berat operasi: 6.000 kg Lasdpjyvpvgsfx Afija Bucket lipat sayangnya sudah dilas permanent Kami selalu siap melayani Anda untuk kunjungan inspeksi.

Kondisi: sangat baik (bekas), Atlas Type: SC 350 MHG Atlas-Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with sunlight simulation by MHG lamp). The unit is suitable for performing standardized weathering and aging tests under combined exposure to radiation, temperature, and climate. Features & Special Equipment: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Access ports for measurement cables available - Control via control panel or interfaces (RS232 etc.) Lajdpfoxbd Rasx Afisa - Robust test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: - Model: SC 340 MHG - Test chamber volume: approx. 335 liters - Cabinet weight: approx. 500 kg - Radiation unit weight: approx. 65 kg Technical Data: - Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) - External dimensions (W × D × H): 865 × 1,595 × 2,180 mm - Radiation source: 1 × 1,200 W MHG lamp - Irradiance: 800–1,200 W/m² - Irradiated area: approx. 3,300 cm² - Weathering: Spectrum 300–3,000 nm, compliant testing according to DIN 75220, IEC 60068-2-5, MIL-STD-810F - Temperature range with radiation: –20 °C to +100 °C (±1 K) - Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) - Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) - Noise level: approx. 58 dB(A) at 1 m distance - Power supply: 400 V, 3/N/PE, 50 Hz - Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical specifications and information!) Feel free to contact us by phone if you have any further questions.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya laser: 30 W, jenis pendinginan: udara, lebar total: 60 mm, tinggi total: 1.660 mm, panjang total: 80 mm, berat keseluruhan: 80 kg, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is essential for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without advanced programming knowledge. The software automatically increments serial and article numbers after prior configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a mount and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 Watt or 50 Watt) • Wavelength 1064nm • Marking field size 150x150mm (Optional: 200x200) • Optional: Rotary axis (3-jaw chuck) Laodpfounh Hrex Afisa • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Signal light for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminium profile • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Kondisi: bekas, jarak tempuh: 65.810 km, daya: 127 kW (172,67 hp), pendaftaran pertama: 08/1985, berat keseluruhan: 12.200 kg, jenis bahan bakar: diesel, warna: hijau, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: mekanis, lebar ruang muat: 2.380 mm, panjang ruang muatan: 4.300 mm, tinggi ruang muatan: 500 mm, lebar total: 2.380 mm, tinggi total: 1.900 mm, Perlengkapan: penggerak semua roda, tail lift,

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 20 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Its compact design makes the system highly practical and suitable for use anywhere. The device is very easy to operate without any programming knowledge required. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and no extensive programming expertise. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 watts (Optional: 30 watts, 50 watts) - Laser class 1 Lsdpfx Afsy Emtheioaa - Wavelength 1064nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact desktop unit with a small working area, making it ideal for marking small components. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The device is very easy to operate, even without programming knowledge. With the powerful laser software, text, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after initial setup. Additionally, the software is capable of importing data (such as variable information like drawing numbers, project names, etc.) from existing tables and transferring it automatically into predefined fields. A hand scanner can also be integrated. Lajdewkpxkspfx Afiea Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. - Fiber laser 30 Watt (Option: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 20 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts or, for example, for marking nameplates. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The unit is very easy to operate without any programming knowledge required. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming skills. The software can automatically increment serial and article numbers after initial setup. In addition, the software can read data (variable information such as drawing numbers, project titles, etc.) from existing tables and automatically transfer them to predefined areas. Using a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20 Watt fiber laser (Option: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: extraction unit (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs Laedpsw Et Ilofx Afija

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many sectors. Lodpfx Afov Sybyjieaa The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers after presetting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long components, can also be implemented. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength: 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measurement system • Optional: Fume extraction (including activated carbon filter) • Optional: Autofocus system – automatic focus distance detection • Signal beacon for operating status display • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (work level adjustment) • Frame made of aluminum profile • Connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Kondisi: bekas, jarak tempuh: 238.277 km, daya: 294 kW (399,73 hp), pendaftaran pertama: 03/2011, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, volume ruang muat: 16 m³, panjang ruang muatan: 6.500 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 1.000 mm, Perlengkapan: ABS, derek, pendingin udara,

Kondisi: bekas, jarak tempuh: 238.277 km, daya: 294 kW (399,73 hp), pendaftaran pertama: 03/2011, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, volume ruang muat: 16 m³, panjang ruang muatan: 6.500 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 1.000 mm, Perlengkapan: ABS, derek, pendingin udara,

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, LICHTER LRK 200 KEPALA PIPA PVC INTI BUSA – TIGA LAPIS Aplikasi: PIPA PVC INTI BUSA Pipa PVC KG-U Aksesori: Peralatan untuk produksi pipa dengan diameter 100 mm hingga 200 mm Lasdpfx Aoyxtnrsfiea Kepala pipa jarang digunakan, karena penutupan perusahaan. Kondisi: sangat baik Lokasi: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Jerman

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Következõ a magyar szakfordítás: Az 1980-as években épült kukoricamalom komplex technológiai korszerűsítése miatt malom berendezéseink eladóvá váltak. A gépek évtizedeken át megbízhatóan és stabilan működtek üzemi környezetben, folyamatos karbantartás és szakszerű üzemeltetés mellett. Ezekben az években cégünk hosszú távú bizalmat szerzett partnerei körében, nagyrészt ezen technológia által folyamatosan biztosított magas termékminőségnek köszönhetően. Az üzem fő profilja a dara gyártása volt, emellett takarmánylisztet, élelmiszeripari lisztet, kukoricacsírát és egyéb melléktermékeket is előállított. A kínált berendezések: - folyamatosan karbantartottak - működés közben is megtekinthetők - a meglévő alkatrészkészlettel együtt értékesítjük Laodpfx Afoylhl Rjioa A teljes elérhető alkatrészkészlet az eladás részét képezi, amely komoly előnyt jelent a jövőbeli tulajdonos számára az üzemeltetés biztonsága és a karbantartás tervezhetősége szempontjából. A feltüntetett ár 1 egységre vonatkozik. Összesen 6 egységünk van. Lehetőség van az összes meghirdetett eszköz együttes, komplett csomagban történő megvásárlására is, melyhez egyedi, kedvezményes árat tudunk biztosítani. Ez ideális lehetőség mindazok számára, akik komplett kukoricamalom létesítését, kapacitásbővítést vagy technológiai fejlesztést terveznek. A berendezések legkorábbi elszállítási időpontja: 2027. február.

Kondisi: bekas, Tahun pembuatan: 2003, PROD. ALUP TIPE SCK 101-08 S/N 217586 TAHUN 2003 DAYA (kW) 75 DEBIT (m3/menit) 12,9 Laodpoyi D Hrjfx Afiea TEKANAN (bar) 8

Kondisi: baru, Tahun pembuatan: 2026, Small-format panel saw with tilting saw blade and high-quality aluminum sliding table. Cutting plane of the small-format panel saw located directly at the rolling table. Precision-guided sliding table made of aluminum, standard anodized finish. Large format table extension guided on telescopic arm and longitudinally adjustable. Standard table extension and width extension allow for easy handling of larger workpieces. The large-sized saw unit made of cast iron is doubly mounted to the cast table, guaranteeing stability, precision, smooth operation, and long service life. Large worktable made of ground cast iron—extremely robust and resistant. Smooth operation and precise cuts. Aluminum sliding table. Equipped with a proven ball-contact system used millions of times. Dust- and dirt-resistant due to minimal contact point between the ball and trapezoidal rail. 10-year HOLZKRAFT warranty on the wear of hardened guide rails. Telescopic stop. Extendable aluminum telescopic stop. Angle adjustable. Includes two professional folding stops. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: - Table extension - Table width extension - Anodized aluminum sliding table - Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical Data Ljdpfx Ajcnxamofijaa - Table dimensions: 1020 x 325 mm - Table height: 900 mm - Cross-cutting length: 1660 mm - Max. cutting height at 90° with scorer: 100 mm - Max. cutting height at 45° with scorer: 79 mm - Max. cross-cut width left of saw blade: 1270 mm - Cutting width with parallel fence: 900 mm - Saw blade tilt: 90° - 45° - Max. saw blade diameter with scorer: 315 mm - Max. saw blade diameter without scorer: 315 mm - Scoring saw blade diameter (option): 80 mm - Main saw blade speed: 4000 rpm - Scoring saw blade speed: 7600 rpm - Electrical connection: 400 V / 50 Hz - Motor power: 4.0 kW - Extraction port diameter: 120 mm - Extraction port diameter, blade guard: 60 mm - Weight: 295 kg Location: In stock at 54634 Bitburg - Immediately available -

Kondisi: bekas, jarak tempuh: 823.150 km, daya: 340 kW (462,27 hp), pendaftaran pertama: 04/2016, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 02/2024, rem: retarder, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baru, - NEW - Description Cutting level directly at the saw blade Heavy-duty grey cast iron steel construction Precision-guided aluminium sliding table, standard anodized finish Large support table guided on telescopic arm and adjustable lengthwise Extendable aluminium telescopic fence with professional flip stops, angle adjustable Parallel fence with quick clamping and fine adjustment Large worktable made from milled grey cast iron remains permanently flat Standard table extension and table widening enable easy handling of large workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-size saw unit made of cast iron is double-mounted on the table, guaranteeing stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with a scoring unit installed Equipment details: Double-trunnion saw unit - Large size, made of steel/cast iron - Positioned close to the saw blade, mounted on both sides for precision, smooth running, and durability - Height and tilt adjustable up to 45° via hand crank - Maximum cutting height even with scoring unit installed - Also available with scoring unit Telescopic fence - Extendable telescopic fence up to a max. of 2550 mm - Angle adjustable - With professional flip stops Aluminium sliding table - Proven ball contact system - Resistant to dust and dirt due to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on guideway wear Parallel fence with round bar guide - With fine adjustment and quick clamping - Sturdy round bar guide made of ground steel, 45 mm diameter - Standard fold-down feature for cutting large workpieces Technical data: Dimensions and weights Weight (net) approx. 380 kg Dust extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated operating mode S6 Current type AC Duty cycle drive motor 40 % Mains frequency 50 Hz Sliding table and worktable Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscut width left of saw blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilting 90 - 45° Laedevyuqfopfx Afija Saw blade speed 4000 rpm Art. No. 5504323

Kondisi: baru, Datalogic Matrix 200 213-101 / WVGA-FAR-25P-ES Compact 2D Imager, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as shown in photos Ledpfx Afei D Un Heieaa

Kondisi: siap digunakan (bekas), Trumpf 12-12-30-A32/09 disk laser S/N 1804667-00097 + kabel listrik, bekas, bekas penggunaan ringan, 100% berfungsi, termasuk sesuai foto. Ljdexaib Ijpfx Afieaa

Kondisi: baru, Schunk OPR-176-P00-S pelindung tabrakan dan kelebihan beban, belum pernah digunakan dalam kemasan asli, berfungsi 100%, kelengkapan sesuai foto. Ljdpfxsi Ec I Ae Afijaa

Kondisi: bekas, konfigurasi gandar: 2 gandar, pendaftaran pertama: 08/1989, warna: lain, Tahun pembuatan: 1989, Berat kosong: 3.500 kg As 1: kiri 8 mm kanan 8 mm As 2: kiri 8 mm kanan 8 mm Lodpfx Aew Sml Asfisaa As 3: kiri mm kanan mm Kami memiliki kemungkinan untuk menumpuk trailer!

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 45 kg, panjang total: 600 mm, lebar total: 400 mm, tinggi total: 690 mm, LASER - LAS 22 is a compact desktop unit with a small working area, making it ideal for small parts or, for example, nameplates. Due to its small footprint, the system is highly practical and can be used anywhere. The unit is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created quickly and easily with just a few clicks, without extensive programming skills. The software automatically increments serial and article numbers after prior setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. A standard feature includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20 Watt fiber laser (Optional: 30 Watt) - Laser Class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (simple preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm Ledpsxqhnzefx Afijaa - Weight: approx. 45 kg - Low operating costs

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Laser for Product Marking - The LAS 28 universal laser marking system by Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be easily created with just a few clicks—no extensive programming skills required. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Integration of a hand scanner is also possible. Lsdpfx Afswkpwaoijaa Standard delivery includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal tower for system status indication • EZCAD marking software (additional laser software optional) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus setting) • Max. part height approx. 270mm • Electrically adjustable Z-axis (work height setting) • Frame made of aluminium profile • Connection 230V • Air-cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: WG002553, Merek/model: MCWEL M630 (Miller) Output DC terukur: 26,4 kW Arus terukur: 550A Tegangan: 20 – 45V Rentang arus: 55 – 550A Duty cycle terukur: 60% Elektroda yang digunakan: 1,6 – 8,0 mm Model mesin: F3L912 Output mesin: 28 kW / 1800 rpm, 60 Hz Sistem pendingin: pendingin udara, kondisi lingkungan Dimensi: P – 1.525 mm x L – 760 mm x T – 1.050 mm Bobot: 900 kg Ljdpfx Ajvznbyjfieaa

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 45.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BAS100, BAS050-11, jenis arus masuk: tiga fasa, daya nominal (semu): 25 kVA, jangkauan kerja: 67 mm, daya nominal pada siklus kerja 50%: 25 kVA, Kami menawarkan mesin las dan anil Flash Butt bekas merk Ideal Germany, model BAS100 dengan anil otomatis dan BAS050-11, bersama 2 unit mesin gerinda Ideal, 1 unit mesin pelindung gigi buatan Italia, dan 1 unit mesin pemotong Ideal. Penjualan juga termasuk aksesoris berikut: 10 set elektroda las untuk BAS050-11 (belum pernah digunakan), 15 set elektroda las untuk BAS100 (bekas), suku cadang perawatan untuk mesin BAS100 (seperti sekring, komponen pneumatik, dll). Semua mesin dalam kondisi berfungsi penuh (saat ini masih digunakan). Lajdpfx Afjy Dzxvoisa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, jam operasional: 24 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WLD-MODEL-SIZE, jenis arus masuk: AC (pendingin udara), tinggi total: 3.000 mm, lebar total: 3.000 mm, panjang total: 2.000 mm, tegangan masuk: 240 V, berat keseluruhan: 8.000 kg, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 3.000 mm, panjang umpan sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 2 m/menit, laju pemakanan gandar Y: 2 m/menit, laju pemakanan sumbu Z: 2 m/menit, masa garansi: 12 bulan, jenis pendinginan: air, daya kontinu: 22 kW (29,91 hp), de Lodpfeyaw Ecjx Afisaa