Beli Safan Dncs 110-3100 bekas (6.281)

Kondisi: baru, 001 Rsdpfxey H N Hyj Alajt

Kondisi: bekas, Tahun pembuatan: 2000, Mesin bekas Tahun pembuatan: 2000 T 110 adalah mesin router meja dari SCM yang secara optimal memadukan kualitas dan harga pembelian yang terjangkau. Konstruksinya sangat stabil. Untuk pengoperasian yang nyaman, semua elemen kontrol ditempatkan dalam jangkauan di bagian depan mesin. Pengaturan tinggi alat yang presisi dijamin dengan indikator mekanis. Rjdpey Ih Tuefx Alaot Kemiringan spindle dari -5 hingga +45 derajat. Ukuran meja: 1000 x 750 mm. Panjang penjepitan spindle: 140 mm. Overhang spindle di atas meja: 20 mm. Kecepatan putar spindle: 3000-4500-6000-9000-10000 rpm. Diameter maksimum alat yang bisa diturunkan di bawah meja: 320 x 40 mm. Alat profil maksimal: 250 mm. Motor: 4 kW. Diameter saluran hisap: 120 mm. Dilengkapi alat feeder. Berat: 520 kg. Ketersediaan: segera. Lokasi stok: Röllbach.

Kondisi: bekas, de-01 Rjdpfx Aleru Unbsast

Kondisi: baik (bekas), jarak tempuh: 72.197 km, daya: 75 kW (101,97 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, jarak roda: 3.430 mm, pendaftaran pertama: 12/2019, panjang ruang muatan: 100 mm, lebar ruang muat: 1.690 mm, tinggi ruang muatan: 1.390 mm, kelas emisi: Euro 6, warna: putih, kabin pengemudi: kabin harian, ukuran ban: 195/65R16, jumlah tempat duduk: 9, Tahun pembuatan: 2019, Perlengkapan: ABS, kontrol traksi, kunci sentral, pendingin udara, sistem navigasi,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Wittmann Battenfeld EcoPower 110/350 / Electric machine / Operating hours: approx. 15,000 in automatic operation Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 682x682 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B8 - Touchscreen Additional equipment: Machine in very good technical condition All-electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Control system with hot runner channels Injection unit is wear-resistant and corrosion-resistant Central lubrication Redjy Dqhaopfx Alaet Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91x1.42x2.10 m All machines offered are put into operation by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection Unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dosage volume: 201 ccm Clamping Unit: Rsdpfsy Dqk Ijx Alaet Clamping force: 110 t Tie bar distance: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - bimetallic Machine serviced by authorized Engel service Machine with original safety enclosure for robot and conveyor belt Dimensions: Weight: 7,400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / All-Electric Machine / Operating Hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 169 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping system: toggle Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition All-electric machine: high-speed, energy efficient, and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 interface Robot interface Rodpfx Aley Dqg Asaet Control with air valve Hydraulic core pull x 1 Hot runner control Injection unit is wear-resistant and corrosion-resistant Central lubrication Automatic mold height adjustment Parallel movements The machine has been serviced in Germany Wittmann W818 Robot Year of manufacture: 2015 4-axis robot: 3 axes are servo-driven (electric); C axis - pneumatic Axis travel distances: X-420, Y-1200, Z-2000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Purchase of robot and conveyor at additional cost Dimensions: Weight: 4800 kg L/W/H: 4.91x1.42x2.10 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: bekas, Cutting length: 3050 mm Workpiece clamping: Handwheel Rsdpfx Aom H Uxyjlaet Extraction system: yes

Kondisi: baru, Tahun pembuatan: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Rodpfxjirmg Uj Alaot Height adjustment: electronic Workpiece thickness display: digital Units: 2 1st unit: helically grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2nd unit: combination unit with finely adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding pad with graphite coating on exchangeable insert, and pneumatic on/off for the roller Segmented sanding pad: elastic, sector spacing 56 Control system: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Extraction port: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Kondisi: bekas, Tahun pembuatan: 2005, Area kerja: X=2970 mm / Y=1725 mm. Kecepatan gerak sumbu: X=60, Y=45, Z=25 m/menit. Berat: 3200 kg. Lokasi gudang: Nattheim. Rodpjw Dcccsfx Alast

Kondisi: bekas, Tahun pembuatan: 2000, Konversi sistem kontrol 2026: CybTouch 15 Windows Tekanan: 100 t Panjang tekuk: 3100 mm Langkah: 215 mm Jarak pengaman: 350 mm Jarak antar rangka: 3250 mm Udara tekan maks.: 8 bar Kecepatan penutupan: 200 mm/detik Rodpfx Alown Ebveaet Kecepatan penekanan: 1-10 mm/detik Kebutuhan daya total: 7,5 kW Berat mesin: kira-kira 8.000 kg Dimensi (P-L-T): 3450x2000x2800 mm

Kondisi: sangat baik (bekas), 7976 Redpfx Alsy E Iycsajt

Kondisi: bekas, Tahun pembuatan: 1985, Panjang potong: 3100 mm Tinggi potong: tinggi dapat diatur dari 0-45 mm Unit gergaji: motor tiga fase yang kuat 220/380 Volt, daya 1,8 kW Bilah penegang atas dikencangkan dengan roda tangan Lokasi: Nattheim Rjdpfx Aovvkazelajt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Rjdpfx Alevf E Avjast Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 106.362 h, Fungsionalitas: berfungsi sepenuhnya, Premium screw compressor Atlas Copco GA110VSD. Year of manufacture 2012. New airend installed at 50,000 operating hours. With heat recovery system. 8.50 bar at 20.70 m³/min. Rodpfx Asul U Tyolaet

Kondisi: baik (bekas), jarak tempuh: 74.061 km, daya: 70 kW (95,17 hp), pendaftaran pertama: 02/2022, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 2.710 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 6, jumlah tempat duduk: 2, panjang total: 4.490 mm, lebar total: 1.860 mm, tinggi total: 1.910 mm, panjang ruang muatan: 1.650 mm, lebar ruang muat: 1.410 mm, tinggi ruang muatan: 1.220 mm, Tahun pembuatan: 2022, Perlengkapan: ABS, Apple CarPlay, Bluetooth, kendali jelajah, kontrol traksi, kunci sentral, pendingin udara, pengaturan jendela elektrik, spion elektrik,

Kondisi: baik (bekas), jarak tempuh: 99.971 km, daya: 70 kW (95,17 hp), pendaftaran pertama: 03/2022, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 2.710 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 6, suspensi: baja, jumlah tempat duduk: 2, panjang total: 4.490 mm, lebar total: 1.860 mm, tinggi total: 1.930 mm, panjang ruang muatan: 1.700 mm, lebar ruang muat: 1.390 mm, tinggi ruang muatan: 1.260 mm, Tahun pembuatan: 2022, Perlengkapan: ABS, Apple CarPlay, Bluetooth, kendali jelajah, kontrol traksi, kunci sentral, pendingin udara, pengaturan jendela elektrik, spion elektrik,

Kondisi: baik (bekas), jarak tempuh: 87.135 km, daya: 75 kW (101,97 hp), pendaftaran pertama: 12/2024, jenis bahan bakar: diesel, ukuran ban: 225/55R17, konfigurasi gandar: 4x2, jarak roda: 3.430 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 6, jumlah tempat duduk: 2, panjang total: 5.370 mm, lebar total: 1.900 mm, tinggi total: 1.910 mm, panjang ruang muatan: 3.060 mm, lebar ruang muat: 1.690 mm, tinggi ruang muatan: 1.390 mm, Tahun pembuatan: 2024, Perlengkapan: ABS, Bluetooth, kendali jelajah, kontrol traksi, kunci sentral, pendingin udara, spion elektrik,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, - BEKAS - PUSAT PEMESINAN VERTIKAL 3-SUMBU DENGAN PENGGANTI PALET Rsdeyvlxkepfx Alajt GERAK SUMBU X: 1250 mm GERAK SUMBU Y: 700 mm GERAK SUMBU Z: 750 mm JARAK HIDUNG SPINDEL-MEJA: 100 - 850 mm GERAK CEPAT X-Y-Z: 15 m/menit SPINDEL: 4000 rpm; 26 kW; ISO 50 - DIN PALET: 2 unit UKURAN MEJA: 650 x 1400 mm MAKS BEBAN DIIZINKAN: 1500 kg COOLANT TEKANAN TINGGI: 30 Bar MAGAZIN TOOL: TIPE RANTAI; 41 POSISI DIAMETER MAKS TOOL: 120 (200) mm PANJANG MAKS TOOL: 400 mm BERAT MAKS TOOL: 20 kg UNIT KONTROL: FANUC 16i-M BERAT: 16750 kg DIMENSI KESELURUHAN: 7135 x 5300 x 3426 mm AKSESORIS: KONVEYOR SERBUK; GEAR BOX

Tahun pembuatan: 2022, Kondisi: baru, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600 kN Rodpfxeiwfp Tj Alast - Maximum bending length: 3100 mm - Year of manufacture: 2022 - CNC-controlled hydraulic crowning - Cybelec Modeva 19T control system - WILA upper tool clamping - 60 mm table with 13.5 mm x 22 mm slot for insert dies - 2 front support arms, adjustable on linear guides - CE certified with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning and training

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 3.100 mm, jarak antara penyangga: 2.600 mm, masa garansi: 24 bulan, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jumlah lengan penopang: 2, jenis mahkota: dikendalikan CNC, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, penghadang cahaya keselamatan, perlindungan jari, sistem penjepitan alat Eropa, YAWEI_PBH1603100-4C Rodoyvzhnspfx Alajt

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Motor 2,5 HP, tinggi potong maks. sekitar 45 mm, diameter mata gergaji sekitar 180 mm, kedalaman hingga stop sekitar 500-530 mm, dengan sistem hisap terpasang, meja penahan belakang, konsol/ meja alas, balok penekan pneumatik/penjepitan benda kerja, dari lokasi. Pengiriman tersedia dengan biaya tambahan! Redsyu Sl Tepfx Alajt

Tahun pembuatan: 1970, Kondisi: hampir baru (bekas), de Redpfxjhbq Rvo Alaot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 2.800 rpm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 30.000 W, tinggi total: 1.915 mm, lebar total: 2.035 mm, berat keseluruhan: 5.650 kg, panjang produk (maks.): 3.821 mm, jumlah sumbu: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw hydraulic chuck with a diameter of 305 mm. If you are looking for a high-quality CNC lathe, you should consider the horizontal turning center DOOSAN Puma GT 3100 M, which we are offering for sale. Please contact us for further details. • Siemens S828D control with touchscreen and 15-inch ShopTurn display • 3-axis CNC horizontal lathe with live tooling and tailstock • C-axis main spindle: 360° with 0.001° resolution • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing over bed: 720 mm • Swing over cross slide: 590 mm • Max. turning diameter: 376 mm • Max. turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max. spindle torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • 3-jaw hydraulic chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max. speed for live tooling: 5000 rpm • Live tool drive power: approx. 7.7 kW • Live tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite design • 30° slant bed construction • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with work area lighting • Interface for bar feeder • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total connected load: approx. 47 kVA • Unused (like new) Additional Equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 Rsdpfjy E I Hisx Alaot • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Kondisi: bekas, Tahun pembuatan: 2002, de-hu-01 Redsy D U Dfjpfx Alaot