Beli Strautmann Pp 1207, Pp 1208 bekas (4.152)

Kondisi: bekas, Tahun pembuatan: 1980, Tekanan 50 t Panjang tekuk 2500 mm Jarak antara tiang 2050 mm Lebar meja 140 mm Ijdpfxjxddqxs Alcstg Tinggi meja 750 mm Kebutuhan daya total 8 kW Berat mesin sekitar 4,5 t Kebutuhan ruang sekitar 3 x 1,2 x 2,6 m Perlengkapan: - penahan belakang manual - alat atas dan bawah - pengoperasian dua tangan / pedal kaki

Kondisi: baik (bekas), Lini ekstrusi SML dengan ekstruder dan co-extruder. Untuk PP digunakan konfigurasi B/A/B. Unit pendingin langsung (SMK) dan unit pengukuran SBI dipasang baru pada tahun 2015. Iodpfxon Utt He Alcjtg * Kapasitas maksimum: 1350 kg/jam * Kapasitas ulir utama: 950 kg/jam * Ulir utama: 180 mm / 33D * Kapasitas co-extrusion: 400 kg/jam * Ulir co-extruder: 120 mm / 33D * Lebar die: 650 mm * Tumpukan rol: 3 * Unit penggulung untuk jumbo roll hingga 1500 kg Lini ekstrusi ini telah dibongkar dan diamankan untuk transportasi (lokasi: Waalwijk, Belanda)

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H2618, berat keseluruhan: 5.200 kg, panjang total: 3.400 mm, lebar total: 1.900 mm, tinggi total: 2.400 mm, produsen motor: Grasso, daya: 445 kW (605,03 hp), Chiller air bekas Grasso FKS PP 450/S pendingin air menggunakan amonia (R717). Dilengkapi dengan 1 unit kompresor sekrup Grasso HR-H36S-28, motor listrik 2EC IE4-0DP-250M2 – 50 Hz – 110 kW – 2970 rpm, heat exchanger soldered sebagai evaporator, heat exchanger soldered sebagai kondensor, oil separator Grasso kapasitas 275 liter, oil cooler, pompa oli, dan panel kontrol dengan Siemens Simatic HMI controller. Kapasitas berdasarkan inlet/outlet air dingin 12 °C/6 °C dan temperatur air pendingin 27 °C/32 °C. Spesifikasi Merek: Grasso Tipe: FKS PP 450/S Kapasitas: 445 kW / 126,5 Ton (Air dingin: 12°C/6°C & air panas 27°C/32°C) Refrigeran: Amonia Berat: 5.200 kg Dimensi: 3400x1900x2400 mm (PxlxT) Kompresor: Grasso HMR-H36S-28 Tampilan: Siemens Simatic HMI Iodpfx Alexz Ek Uocetg Tahun pembuatan: 2017

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, daya: 2,6 kW (3,54 hp), berat keseluruhan: 35 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, laju aliran volumetrik: 6.630 m³/jam, jenis bahan bakar: listrik, 1 Itedpext I Nkefx Alcsg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15461, Tahun pembuatan: 2015, jam operasional: 614 h, tinggi angkat: 4.800 mm, pusat beban: 900 mm, jenis bahan bakar: listrik, DETAIL TEKNIS Kapasitas angkat: 2.500 kg (hingga ketinggian angkat 3.600 mm) Ketinggian angkat: 4.800 mm Titik berat beban: 900 mm DETAIL MESIN Tipe tiang: D 45-TR Tipe motor: Listrik Berat sendiri sekitar: 3.180 kg Tegangan baterai: 48 V Jam operasional: 614 jam Iodpfx Alsy Ic I Tjcetg

Tahun pembuatan: 1969, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, gaya penekanan: 16 t, panjang langkah: 250 mm, panjang meja: 780 mm, lebar meja: 400 mm, nomor mesin/kendaraan: 792769/4260, Tidak ada harga minimum - penjualan dijamin kepada penawar tertinggi! Pengajuan penawaran mewajibkan pengambilan tepat waktu antara 23.06.2026 dan 26.06.2026! RINCIAN TEKNIS Daya tekan: 16 t Langkah kerja: 250 mm Luas pemotongan: 400/1 mm² Ukuran meja: 780 x 400 mm Diameter lubang: sekitar 90 mm Diameter roda gila: 1.600 mm RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 1.600 x 1.600 x 2.000 mm Berat: 700 kg Referensi eksternal: 15 Iodpfey D Sgwjx Alcjtg

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, lebar total: 300 mm, tinggi total: 1.000 mm, panjang total: 1.000 mm, berat keseluruhan: 70 kg, jenis penggerak: akkubetrieben, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Mengajukan tawaran mewajibkan pengambilan tepat waktu antara 23.06.2026 dan 26.06.2026! DETAIL TEKNIS Jenis pengoperasian: Bertenaga baterai DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 1.000 x 300 x 1.000 mm Berat: 70 kg Isdpfey D Sfmsx Alcotg PERLENGKAPAN Pita pengikat Referensi eksternal: 6

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, High-end 5-axis flipping machine for aluminium structural components available at short notice. 90–95% completed, can be inspected under power at the factory. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large, thin-walled aluminium structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and available for inspection under real machining conditions. 👉 This machine platform has already been installed over 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end equipment (Fischer / Siemens / Heidenhain) - 5-axis complete machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminium structures - Very attractive price/performance ratio - Includes 2 pallets (2000 x 4000 mm), setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Equipment - 5-axis torque motor swivel head (zero backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation Itjdpfx Ajy H Ncbjlceg - R-TEST calibration system Includes setup station and pallets! German service, spare parts warehouse, etc.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de Itedpfx Aoxv R Ibslcsg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1997, kapasitas angkut: 13.500 kg, Trailer industri Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: baik Ijdpfey Tgbzsx Alcetg Deskripsi: Trailer 2-sumbu tipping 3-arah SCHWARZMÜLLER dengan dinding aluminium – Kapasitas muatan 13,5 ton – Berat kosong 4,5 ton – Tahun pembuatan 1997 – Dinding bisa diayun dan dibuka – Dinding belakang terbuka secara otomatis – Dinding pertama aluminium 80 cm asli Schwarzmüller – Dinding tambahan aluminium 60 cm – Sasis dan bagian bawah pelat sudah disandblasting, diberi primer, dan dicat – Sistem udara bertekanan 2 sirkuit – Sistem penerangan – Ukuran platform bagian dalam: lebar 2,42m, panjang 5m – Ban sekitar 80% – Dengan dokumen Austria siap didaftarkan

Kondisi: bekas, jarak tempuh: 49.527 km, daya: 75 kW (101,97 hp), pendaftaran pertama: 09/2017, jenis bahan bakar: diesel, berat keseluruhan: 2.800 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, Tahun pembuatan: 2017, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, berat kosong: 8.767 kg, berat muatan maksimum: 27.233 kg, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 03/2018, inspeksi berikutnya (TÜV): 07/2026, panjang total: 2.600 mm, lebar total: 4.000 mm, suspensi: udara, ukuran ban: 385/65 R22.5, Perlengkapan: ABS,

Kondisi: baik (bekas), Tahun pembuatan: 2000, stanzenpresse-eht-strippit-1500-30-2000-fanuc Itjdpfx Asul S Eajlceg

Kondisi: baru, Tahun pembuatan: 2026, en-GB Itsdpfjd Nm Siox Alcsg

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers Itedpfxjgl Nlms Alcjg + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Itedpfx Alschqxxsceg Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Itsdpfx Aljxfwdjceg

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Isdpfx Aljgfm Ryscotg Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Itjdpfsd N Dnhjx Alcsg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Isdpfx Alod Su Hxecjtg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Itodpfx Aeffh Atjlcog Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: bekas, jarak tempuh: 155.086 km, daya: 382 kW (519,37 hp), pendaftaran pertama: 11/2023, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 10/2026, rem: retarder, warna: abu-abu, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2023, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 264.903 km, daya: 382 kW (519,37 hp), pendaftaran pertama: 01/2024, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 01/2027, rem: retarder, warna: abu-abu, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2024, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Tahun pembuatan: 2025, Kondisi: bekas, nomor mesin/kendaraan: 0799-250030, Tangga dari kisi-kisi galvanis: Semua anak tangga dengan lebar 1020 mm dan tinggi anak tangga 180 mm, 3 unit dengan 4 anak tangga 20 unit dengan 3 anak tangga tanpa penyangga Isdpfxoxbqdgj Alcstg 6 unit dengan 3 anak tangga dengan penyangga Semua tangga galvanis dan dalam kondisi baik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, hersteller-lvd-typ-ppeb-170-42-baujahr-2001-seriennummer-27755-m aximale-presskraft-170-t-biegelange-5-m-anzahl-der-achsen-4 Iedpfxey Sk R Dj Alcotg