Beli Artech-Biesse Single bekas (9.963)

Kondisi: bekas, nomor mesin/kendaraan: 008125, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem perekat: EVA Milling join: ya Unit multifungsi: ya Unit kerja: 9 buah Dsdpsw Tivmefx Airouu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: 1000028110, Fungsionalitas: berfungsi sepenuhnya, daya: 12 kW (16,32 hp), jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 60 mm, panjang benda kerja (maks.): 2.600 mm, lebar benda kerja (maks.): 900 mm, tinggi benda kerja (maks.): 60 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, Dijual pusat pemrosesan CNC vertikal berkualitas tinggi. Mesin dibeli baru, kami adalah pemilik pertama dan satu-satunya yang menjamin riwayat perawatan dan penggunaan yang jelas. Mesin dalam kondisi sangat baik, sangat terawat tanpa perlu investasi tambahan. - Kapasitas kerja x/y/z 2600-900-60 mm Dedpjy Sfw Ejfx Airouu - Kepala kerja dengan kepala bor BH17 (10 mata bor horizontal dan 6 vertikal) - Kecepatan hingga 65 m/menit - Kontrol BSolid - Pembacaan otomatis dimensi menggunakan laser.

Kondisi: bekas, Tahun pembuatan: 2014, nomor mesin/kendaraan: 33041, Fungsionalitas: berfungsi sepenuhnya, daya: 4,5 kW (6,12 hp), jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 90 mm, Perlengkapan: Penandaan CE, The machine has been regularly maintained and is in excellent working condition. Duodpsy Sfi Isfx Aireu Linear guides and ball screws are in excellent condition, free of any backlash. The infeed and outfeed tables are fully functional. The transport clamps operate synchronously and provide strong performance. The drilling unit is equipped with 82 spindles. Both the upper and lower milling units use ISO 30 tool holders. The motor bearings are in good condition and run at 24,000 rpm. The machine is operated via the BiesseWorks control interface. All electronics inside the control cabinet are clean and dust-free.

Kondisi: baik (bekas), Tahun pembuatan: 1997, MESIN 3-SUMBU UNTUK PENGEBORAN DAN PENGGURAAN BAGIAN PERABOT KORPUS, DENGAN PERGANTIAN OTOMATIS ALAT FRAIS Bidang kerja: 2.893 x 950 mm Tinggi benda kerja maks.: 65 mm Jumlah penyangga benda kerja: 6 Jumlah vakum suction cup per penyangga: 2 1 motor frais, 6,8 kW Ketinggian lewat antara permukaan penopang dudukan alat motor ke tepi atas vakum suction cup sekitar 250 mm 2 pengganti alat: 3 posisi bergerak dan 4 posisi samping Gergaji alur tetap pada sumbu X Jumlah spindle bor vertikal: 10 Jumlah spindle bor horizontal: X 2 + 2, Y 1+1 Pompa vakum 100 cbm/h Kontrol: NC 410 Perlindungan tikar pijak di depan mesin Dusdpfxoy Iaiho Airou

Kondisi: sangat baik (bekas), Pusat kerja dengan unit pelapis tepi dalam kondisi sangat baik. Dusdpfx Aioylcgpjrju Data teknis akan segera diperbarui.

Kondisi: baru, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature and 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring via magnetic float switch - Dirt filter in the return line of the circulation and cooling water supply - Reversal switch for leak stop operation (usable up to system shutoff temperature) - Ball valve on supply and return - Automatic temperature-dependent system shutoff - Filling duration monitoring and Aquatimer - Adjustable pump post-run - Adjustable temperature alarm - Options: Interface cable - Control unit SBCmini, with relay for collective alarm, 230V, terminal mounted on rear of controller - Heating control SSR - Control panel IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater via upstream heating protection - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Maximum flow rate: 27 l/min Maximum delivery pressure: 4.5 bar Motor power: 0.5 kW Design: submersible pump / peripheral impeller *Dimensions/Weight/Colors Dimensions L/W/H: 600 mm x 240 mm x 493 mm (excluding connectors) Dodpsfnvwqsfx Airjuu Weight: approx. 43 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: G1/2" female Cooling water: G3/8" female *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in offers or order confirmations.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Duedjg Ey Rfspfx Airsu Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Djdpjftm Hrefx Airsuu Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: baru, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Functional Equipment: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return flow of the circulation and cooling water inlet - Reversing unit for leak stop operation - Manual tool drainage via leak stop operation and actuation of a vent valve at the rear of the unit - Monitoring of filling time and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling spout, interface cable, mechanical flow meters *Electrical Functional Equipment: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, on terminal at rear of controller - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - CEE plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tube heating elements made from Incolloy - Device mounted on castors, two of which are steerable and with brakes - Additional temperature safety device for secure disconnection of the heater at the heating downstream circuit breaker *Cooling: Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Threaded socket G3/8" F (Capacity specified at 80°C supply and 15°C cooling water temperature, and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Flow rate (max.): 40 l/min Delivery pressure (max.): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions / Weight / Colour: Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Duodpfx Ajfnvvieirsu Weight: approx. 30 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: Threaded socket G1/2" Cooling water: Threaded socket G3/8" Filling (option) *This device conforms to European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be listed in quotations and/or order confirmations.

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters Djdeg Ey Ufspfx Airjuu -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Kondisi: baru, TECHNICAL SPECIFICATION: Dusdpeg Ey T Esfx Airou Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. pump pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Process media connection: Flange DN40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control unit: Smart Controller (7" touchscreen display) - Heating control via solid-state relays - Control cabinet IP54, forced ventilation - Expansion tank, heater, and piping in stainless steel - Heating with Incolloy stainless steel tubular heaters - Strainer (circulation) - Unit ready for connection, mounted on castors (2 steerable and braked) - Cooling and filling controlled by solenoid valve - Configurable automatic filling via cold water intake or separate connection (factory-set via cooling water inlet) - Flow measurement via differential pressure principle - Level monitoring with magnetic float switch - Automatic temperature-dependent system lock (not on WP7-90) - Flow monitoring by flow detection - Bypass between supply and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized mixing valve (WP7-180/200) - System pressure monitoring via pressure transmitter in the expansion tank (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional otherwise) - Safety temperature limiter (STB) in heater and supply line (WP7-200) - Manometer in supply line at the rear of the unit - Circulation circuit insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are fulfilled only if specified in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements differing from the standard will be specified in quotations or order confirmations.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) Duodeg Ezarepfx Airou - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: baru, *Technical Specification: -Air-cooled, 25.5 kW rated at +10°C supply temperature at an ambient temperature of +32°C -Temperature range supply: +5°C to +30°C (Optional lower temperatures down to -5°C possible) -Air volume: 8,000 m³/h -Max. air inlet temperature: +30°C -Optional heating capacity up to 24 kW *Pumps: -Delivery rate up to 150 l/min -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -Unladen weight: approx. 480 kg Dujdpfog Ewwrex Airsu -Process medium connection: DN 32 internal thread *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -SBC-T control and regulation unit -Display for setpoint and actual value, alarm indicator -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve in accordance with DIN EN 378 -Power control -Frost protection monitoring -Flow monitoring -Grill cover over condenser -Oil sump heating -Drain facility -Level monitoring via float magnetic switch -Installed dirt trap in return line of process medium -Bypass valve between supply and return as pump protection, factory set -High and low pressure limiter according to DIN EN 378 -Stainless steel tank, capacity: 80 litres, open system, fully insulated -Self-supporting housing with castors, mobile -System for indoor installation -Control cabinet IP 54 Other performance classes available on request. Visit our homepage for more details. *This unit complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requirements deviating from the standard are shown in quotations or order confirmations.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 3200 mm Area kerja Y: 1200 mm Spindle elektrik Mata bor untuk pengeboran vertikal: 10 Dusdpfoyv Avmsx Aireu Mata bor untuk pengeboran horizontal X: 4 Mata bor untuk pengeboran horizontal Y: 2 Pisau alur pada arah X Penukar alat 16 posisi Meja kerja dengan 6 balok Perangkat lunak: Biesse Bsolid Pompa vakum PICCHIO 2200 kapasitas 90 m3/jam Karpet pengaman Jaring pelindung

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, Marke: Biesse Modell: Forecon 51 Maschinen-Nr.: 401/83 Baujahr: 1984 Technische Daten: 1 horizontale Bohrgruppe mit 21 Spindeln 2 schwenkbare Bohrgruppen mit jeweils 15 Bohrfuttern Dedpfxjriutks Airjuu Spindelabstand: 32 mm Motor horizontale Einheit: 2 PS 2 vertikale Motoren: 2 PS Spindeldrehzahl: 2.800 U/min Luftdruck: 6–7 bar Luftverbrauch pro Zyklus: 17 l Gesamtanschlussleistung: 5,5 kW Wird mit Anschlag geliefert, siehe Foto. Abmessungen der Maschine: 1.500 x 3.140 x 1.500 mm Gewicht: ca. 590 kg Lager-Nr.: 2001355

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, automatic edge banding machine model BIESSE AKRON 245 Used machine CE-compliant: Yes Includes operating manuals Suitable for edging wood, PVC, veneer, melamine, and ABS for furniture, fittings, kitchens, bathrooms, doors, panels, and more NC 321 electronic positioner Technical Data: - Min. panel height to be edge-banded: 10 mm - Max. panel height to be edge-banded: 45 mm - Min. tape edge thickness: 0.4 mm - Max. tape edge thickness: 3 mm Dujdpfxegipk As Airju - Max. solid wood edge thickness: 8 mm - Min. panel width: 50 mm - Min. panel length: 150 mm - Feed speed motor power: 2 HP - Electric pressure beam lift - Telescopic support for large panels - Sound insulation cabin Configuration: - Gluing unit with glue pot - Pressure rollers - Edge feeding system - End trimming unit for vertical cutting of excess edge, front and rear, with 2 motors - Top/bottom trimming unit for trimming upper and lower excess edge, with 2 motors - Tiltable top/bottom trimming unit for final trimming of upper and lower excess edge, with 2 motors - Glue scraper unit for removal of glue residues - Overlapping brushing unit for brushing and polishing applied edges, with 2 tiltable motors - Air pressure: 7-8 bar - Weight: 1700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Biesse Artech Levia 310 - 1350. Tahun pembuatan: 2008. Harga UK £9,000 + PPN Mesin amplas finishing sabuk tunggal yang telah digunakan untuk pra-amplas dan penghalusan permukaan di ruang cat. Kini dijual karena ruang cat telah ditutup. Dapat juga digunakan untuk kalibrasi dan pengamplasan kayu solid. Konstruksi kepala/sabuk tunggal. Terhubung ke layanan dan siap untuk demonstrasi kapan saja. Kondisi sangat baik. Lebar kerja 1350mm. Ketebalan benda kerja antara 3mm dan 200mm. Unit kerja kombinasi: Roller kalibrasi baja beralur DAN Pad tersegmentasi elektronik. Dusdoyuy R Dspfx Aireu Sikat pembersih pada bagian keluaran. Meja vakum untuk meningkatkan penahanan panel. Pembersihan sabuk dengan udara bertekanan. Pengaturan ketebalan panel otomatis. Roller input diperpanjang.

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), daya motor spindle: 4.000 W, kecepatan spindel (maks.): 15.000 rpm, jumlah sumbu: 3, el Djdpfxjy Ddn Ts Aireuu

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), I am offering a BIESSE TECHNO FDT through-feed drilling machine for sale. Year of manufacture: 2004. Working area: Dujdpfx Aioi U Apmorou X-axis: 215 - 32,000 mm Y-axis: max. 672 mm (horizontal spindle: 24 units, 32 mm pitch) Z-axis (workpiece height): 9 - 65 mm Minimum X distance between vertical heads: 96 mm Configuration: 4+4 lower drilling motors 1 routing motor underneath, with in/out stroke 1+1 side drilling motors, 24 spindles, 32 mm pitch 0 rear motors 4+4 upper drilling motors 4 top pressure rollers Machine is in excellent condition and available immediately. Another BIESSE TECHNO FDT with different configuration available in line. Price upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, en-001 Duodpjt N Rkvjfx Aireu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, I am selling a CNC dowel drilling machine with dowel insertion unit, BIESSE COMIL INSIDER KT2, year of manufacture 1999. - 2 x CNC drilling heads from above - 1 x groove saw - 3 x 3Master vibratory dowel insertion units Djdot N Hmmopfx Airjuu This unit is part of a Biesse production line consisting of: COMIL Insider dowel boring – milling – grooving – dowel insertion – glue application – accessory insertion – complete line Year of manufacture: 1999–2001. The machines can also be sold separately. Vibratory dowel hoppers and powered conveyors included in the offer. For more photos and details, please send an inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, I am selling a CNC dowel drilling machine with dowel insertion unit, BIESSE COMIL INSIDER KTC, year of manufacture 2002. Duodpot N Rixsfx Airsu - 2 pcs. CNC drilling heads from the side - 1 pc. glue injection head - 3 pcs. 3Master vibratory dowel insertion units These are part of a Biesse production line consisting of: COMIL Insider dowel drilling - milling - grooving - dowel insertion - glue application - accessory insertion - line Manufacture years: 1999-2001. It is possible to sell the machines separately. Vibratory feeder and motorized conveyor included in the offer. For more photos and details, please send us an inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, I am selling a double-sided throughfeed CNC machining center Biesse Skipper 100, year of manufacture 2006. Very productive and fast. Automatic infeed table. Working length: 90-3000 mm Working width: 70-1000 mm Working height: 8-60 mm Dujdpfohlhigjx Airou Configuration per side: Milling unit: 3.5 kW, 7,000-18,000 rpm 29+8+2 drilling heads 1 grooving saw D.150 mm, X-axis direction Software: BiesseWorks. CD included. Condition: Very good! Fully functional. Automatic central lubrication system and extraction hoods. Complete with safety barriers, conveying elements, and CE-compliant features. CE certificate and complete documentation included. Requires repair: 1 pcs. safety mat.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, I am selling a double-sided, throughfeed CNC machining center Biesse Skipper 100, year of manufacture 2008. Very productive and fast. Features automatic infeed table. Working length: 90–3000 mm Working width: 70–1000 mm Working height: 8–60 mm Configuration per side: - Milling head 3.5 kW, 7000–18000 rpm - 29+8+2 drilling spindles - 1 grooving saw D.150mm, X-axis direction Dsdsq Diw Aspfx Aireuu - Software: BiesseWorks, CD included Version with outfeed table. Condition: very good! Fully functional. Automatic central lubrication system and extraction hoods included. Complete with safety barriers, transport units, and CE marking. CE certificate and full documentation included.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, I am selling a throughfeed CNC nesting machining centre Biesse Excel NBC 712 X1-S, year of manufacture 2008. Highly productive and fast machine. Automatic infeed table. Working area: 3730x2200mm Configuration: - Milling head HSK63, 12kW, 1000-24000 rpm, independent Z-axis, liquid-cooled - Tool magazine with 8 positions HSK63 - 16+8+4 drilling heads - 1 grooving saw D.150mm, 2 positions X/Y - 1 revolving electrospindle with cutting unit - Software: BiesseWorks Advanced + Biesse Nest. CD included - Pumps: 3 pcs. BUSCH, 3x 300/360 m3/h Dujdsfwvppepfx Airsu Condition: like new! Fully functional. Automatic central lubrication system and extraction hoods. Complete with safety barriers, transport components, and CE features. CE certificate and full documentation included.