Beli Boekels Discovery C bekas (54.555)

Kondisi: bekas, Tahun pembuatan: 1985, x-Travel 710 mm y-Travel 500 mm z-Travel 460 mm Ukuran meja penjepit 1000 x 500 mm Taper spindle SK 40 Kontrol HEIDENHAIN TNC 155 Kecepatan spindle 31,5 - 3150 rpm Feedrate - memanjang/melintang/vertikal 1 - 3000 mm/menit Rapid traverse memanjang & melintang 6 m/menit Rapid traverse vertikal 4 m/menit Pergerakan quill 110 mm Cgodpfx Aqezip Hioxjw Jarak muka spindle-meja maks. 559 mm Beban meja maks. 500 kg Kebutuhan daya total 14 kW Berat mesin sekitar 3,3 t Dimensi mesin P x L x T 2,20 x 2,30 x 2,15 m Aksesori: kepala vertikal dengan penjepit alat hidrolik dan quill yang dapat ditarik keluar, meja tetap, handwheel elektronik, sistem pendingin

Kondisi: bekas, Gunting LVD Tipe HST C-10/31 Kapasitas 3000 x 10 Csdpfx Ajx Tqtbsqxogw

Kondisi: sangat baik (bekas), Weiss Model: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approx. 600 liters of usable volume is suitable for temperature and humidity tests as well as conditioning of samples and materials in the range from -70 °C to +180 °C. Simcon/32 - Net control Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 800 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Port openings: 2x R1 nominal diameter 125 mm ∅ 1x L1 nominal diameter 50 mm ∅ Test space volume: approx. 600 liters Temperature test data: Temperature range: -70 °C to +180°C Temporal temperature deviation at the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: at +20 °C: 5000 W at -20 °C: 5000 W Climatic test data: Temperature range: +10 °C to +95 °C Humidity range: 10 to 98% RH Temporal temperature deviation at the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation (temporal, center of usable space): ± 1 to ± 3 % RH Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse required (on site): 32 A slow-blow Permitted test load: Total load on grid shelves: 80 kg Test chamber floor: 80 kg, Insert shelf: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following steps are carried out on all climate chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate Cedpfezimg Hex Aqxsgw 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, we will be happy to provide information by phone.

Kondisi: sangat baik (bekas), CTS Model: CSR-60/810/S Air-cooled Temperature and Climate Conditioning Unit CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system manufactured by CTS GmbH, comprising a conditioning unit (type CSR-60/810/S) and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications—for example, automotive, electronics, component, or material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system by CTS GmbH, consisting of: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance/lifetime testing). Technical Data (per nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerant: - Pre-cooling stage: R452A (17.0 kg) - Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 | Test chamber: IP22 Dimensions & Weight: Cjdpfxjzimgae Aqxjgw Conditioning unit: Dimensions (WxDxH): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (WxDxH): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information: The following work is performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change. Errors excepted.) We are happy to answer further questions by phone.

Kondisi: bekas, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80 °C – 400 V – 5 kW For sale is an industrial drying oven / heat drying oven manufactured by Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory settings. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel trays. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80 °C Temperature control: digital Safety thermostat included CE marking present Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (see image) Cgsdpfx Aqszimf Nsxow (Misprints and errors in technical data are subject to change!) For further inquiries, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), EN-ESPEC-PL2KPH-2024-06-20-DE-EN-01 Cgodezimfpspfx Aqxsw

Kondisi: sangat baik (bekas), Vötsch Cjdpfxszima Hs Aqxegw Model: VT³ 7006 S2-M Water-cooled Technical Data: Maximum specimen weight: 20 kg Test volume: 60 liters Test chamber dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via shuttle) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm conduit for measurement / test specimen supply SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW, Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important safety information for buyers: The following procedures are carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Thermo Scientific Vötsch Model: UT 6420 For sale is a professional laboratory and industrial drying oven / heating cabinet Thermo Scientific / Vötsch Industrietechnik – Model UT 6420. This unit is suitable for drying, heating, tempering, and thermal treatment of materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and material testing. The stainless steel interior chamber ensures uniform heat distribution and is designed for continuous operation. Interior: Stainless steel with sliding shelves External dimensions approx.: 170 × 70 × 80 cm (H × W × D) Technical Data: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Model: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Cedjzimatjpfx Aqxegw Protection class: IP20 Weight approx.: 200–230 kg Condition: used Scope of delivery: (see photo) (Specifications and details are subject to change and errors excepted!) For further questions, please contact us by phone.

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Technische Details Diameter benda kerja 1000 mm Berat benda kerja - kg Tinggi benda kerja - mm Kontrol Motor spindel penggiling 11 kW Kebutuhan daya total 25 kW Berat mesin sekitar 6500 kg Kebutuhan ruang sekitar 4100 x 3200 x 2600 mm Informasi tambahan Mesin berasal dari penutupan pabrik Perlengkapan: Perangkat pendingin 500 liter dengan filter pita kertas 4 buah batu gerinda (3 buah belum terpakai) Data teknis: Diameter meja putar 800 mm Cgjdpozimx Aefx Aqxow Jarak maksimum meja putar ke pusat spindel penggiling 850 mm Diameter batu gerinda 400 mm Lebar batu gerinda 80 mm

Kondisi: bekas, TRUMPF TruDisk 4002 (4 C) high-power solid-state disk laser, up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution—ideal for industrial manufacturing environments with high demands for quality, precision, and automation. Its combination of high output, excellent beam quality, and smart factory features makes it a particularly attractive choice for modern production lines. Machine Type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of Manufacture: May 2012 Drawing Number: 20-10-02-A3* No further in-house inspection was carried out. Operating hours could not be accessed. The laser operated flawlessly until decommissioning. Technical specifications: - Output & Wavelength: 80–4000 W at 1030 nm - Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) - Modular & compact: footprint < 1 m², modular design simplifies maintenance/service - Efficient energy & cooling systems: - Energy-saving modes, active power factor correction, pulse function for reduced consumption - Flexible cooling: integrated heat exchanger (5–28°C), optionally with compressor (inlet temperature up to 38°C) - Reflection-resistant: special resonator design also suitable for highly reflective metals - Industry 4.0-enabled: comprehensive sensors & data interfaces for condition monitoring, OPC UA, predictive maintenance Applications: - Scanner and hybrid welding (e.g. automotive bodywork, shipbuilding) - High-speed cutting, including reflective metals - Flame cutting & surface processing - Cladding, hardening, deep penetration welding with high precision requirements Technical Data: - Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Cgsdpfxezii Nqj Aqxow - Frequency: 50–60 Hz - Power consumption: 23 kW / 25 kVA - Rated current: 34 A at 400 V - Degree of protection: IP 54 - Short-circuit withstand capacity: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; information is without guarantee!) For further questions, please contact us by phone.

Kondisi: bekas, Trumpf TRUMPF TruDisk 6602 (4 C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4 C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering continuous output of approximately 6.6 kW – perfectly suited for welding, cutting, and surface processing of metals like steel, aluminum, copper, and more. Machine Type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No additional inspection was conducted in-house. Operating hours could not be read out. The laser was operating flawlessly up until decommission. Key Technical Features: - Power output: Continuously adjustable from 80 W up to 6600 W, max. 6.6 kW for machine tools - Beam quality: < 2 mm·mrad for excellent focus control - Wavelength: 1030 nm (infrared), adaptable to green wavelength in special models - Beam sharing: Up to 4 laser outputs (4C), enabling the simultaneous supply of multiple processing cells - Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) - Modular and service-friendly: Compact design (< 1 m² footprint), modular components for rapid servicing Benefits & Applications: - Maximum process stability: Real-time power regulation ensures reproducible results - Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum - Industry 4.0 ready: Onboard sensor monitoring system, OPC-UA interface for condition monitoring & predictive maintenance - Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes - Versatility: Application areas range from welding (including BrightLine for virtually spatter-free results) and cutting, to hardening, cast processing, additive manufacturing, laser wire cladding, and more. Cgsdpfezii D Iox Aqxew Typical Use Cases: Ideally suited for industrial high-power laser applications: Application | Features -----|----- Production of automotive body parts | Deep penetration welding with high repeatability Copper welding | Especially suited with green wavelength (>95% spatter reduction) Remote hybrid welding | Fast processing of large areas with robust beam quality Additive manufacturing & hardening | Suitable due to beam quality & compact design Main Technical Data: Property | Value -----|----- Laser power | up to 6,600 W (6.6 kW), continuously variable Beam quality |

Kondisi: sangat baik (bekas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C, Water-Cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well-maintained. Chamber Volume & Internal Dimensions: Test volume: 60 liters Interior basket/test space (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min Single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lifting System: Basket/lift system load: 20 kg maximum load Transfer basket protected by safety grilles on all sides Additional Features & Specifications: Noise level: approx. 58 dB(A) in operation Control: touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A External circuit protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg For your safety as a buyer, please note the following information! The following measures are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Recharge with legally compliant refrigerant if necessary Cjdpfxezii A Ro Aqxogw 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality testing device for simulating sunlight and weathering effects. Cgodeziiz Hspfx Aqxow The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp Type: Fluorescent UV lamps Temperature Range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV exposure, condensation, and spraying phases Humidity range: approx. 10% to 95% r.h. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data may be subject to change and errors!) For further questions, please feel free to contact us by phone.

Kondisi: bekas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98% r.H. Test chamber internal dimensions (approx.): Height 870 mm / Width 1000 mm / Depth 1000 mm External dimensions (approx.): Height 1950 mm / Width 1200 mm / Depth 2220 mm Control cabinet (approx.): Height 2100 mm / Width 800 mm / Depth 400 mm Test chamber volume: 900 litres Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your security as a buyer, please note: The following points are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) Cgjdpfx Aqsziiztexjw If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS climate test chamber type: C -40/600, air-cooled (retrofitted to use R-452A) Test chamber volume: 600 liters Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time in stabilized state - Average temperature change rate (without test specimen and without heat radiation): Heating: 2.5 K/min Cooling: 3.0 K/min - Max. heat radiation: 2500 W at +20°C Climate testing: - Climate range / Technical data: Temperature range: +10 °C to +95 °C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7 °C to +94 °C Dew point range II: –10 °C to +7 °C Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Test chamber dimensions (approx.): - Height: 850 mm - Width: 850 mm - Depth: 830 mm External dimensions (approx.): - Height: 1900 mm - Width: 1115 mm - Depth: 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Nominal current: 11.9 A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Csdpfx Asziizgsqxjgw 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Tipe: VT 3050 Unit / Lemari Uji Lemari Suhu Pendingin udara Volume ruang uji 500 liter Kisaran suhu -30°C /+100°C Fluktuasi suhu waktu K ±0,5 Fluktuasi suhu ruang K ±1,5 Gradien suhu K 3 Cgsdpoziizaofx Aqxsw Kecepatan perubahan Pemanasan K/menit 2,0 Pendinginan K/menit 1,4 Kompensasi panas maks.W 650 Nilai kalibrasi +23°C +80°C Dimensi ruang uji Lebar 710 mm Kedalaman 590 mm Tinggi 1250 mm Dimensi luar Lebar 940 mm Kedalaman 1030 mm Tinggi 1955 mm Tingkat tekanan suara db(A)

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), en001 Cjdpfsziiypox Aqxegw

Kondisi: sangat baik (bekas), Vötsch Model: VTS 7018-5 Water-cooled Temperature Test Chamber System converted to R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Nominal voltage: 3/N/PE AC, 400V ±10%, 50Hz Nominal power: 10 kW Nominal current: 21 A Main fuse (on-site): 32 A slow-blow Sound level at 1m distance (free field measurement): Cgsdjziixxopfx Aqxjw

Kondisi: sangat baik (bekas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Time-related: ± 0.8 K Spatial: ± 2.0 K Heat compensation: max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% RH Temperature deviation, time-related: ± 0.3 K Humidity deviation, time-related: ± 3% RH Temperature uniformity: Spatial: ± 1.0 K Heat compensation: max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions, lowered: Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions over shaker: Height 2710 mm External dimensions, max. lift height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your security as a buyer, please note the following information! The following steps are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Cedpfxsziixrj Aqxegw 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Model: VT 7021 Temperature Test Chamber, Air-cooled 1 port, nominal width 80 mm Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temperature deviation over time: ± 0.2 to ± 0.5 K Temperature deviation spatial: ± 0.5 to ± 1.5 K Heating rate: 2.5 K/min Cooling rate: 2.5 K/min Maximum heat compensation: 800 W Cedpfx Aqoziiw Isxogw Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50Hz Nominal power: approx. 1.8 kW, Nominal current: 12 A Refrigerants: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data and specifications are subject to change or error!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT 7012 S2 Air-cooled shock test chamber Two-chamber design Hot chamber: Temperature control range for the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change (heating): 11 K/min Cold chamber: Temperature control range for the cold chamber: -80°C to +70°C Cgedpfxeziiwzj Aqxew Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change: - Heating: 2 K/min - Cooling: 3 K/min Test chamber volume: 125 liters Temperature range (hot chamber): +50°C to +220°C Temperature range (cold chamber): -80°C to +70°C Test chamber dimensions: - Width: 470 mm - Depth: 650 mm - Height: 410 mm External dimensions: - Width: 930 mm - Depth: 2115 mm - Height: 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +10% 50Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1000 kg For your safety as a buyer, the following information: The following measures are carried out on all chambers offered by us in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Modifications and errors in the technical data, as well as changes, are reserved!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Model: VCS 7018-5 Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Technical Data for Temperature Testing: Temperature Range: -70°C to +180°C Temporal tolerance: ± 0.1 to ± 0.5 K Spatial tolerance: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Technical Data for Climatic Testing: Temperature Range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ± 0.1 to ± 0.3 K Temperature deviation (spatial): ± 0.5 to ± 1 K Cjdpsziiwhjfx Aqxjgw Temperature gradient: 1 to 2 K Humidity fluctuation (temporal): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Fuse: 32 A slow-blow, on site Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to changes and errors!) If you have any further questions, we are happy to answer them by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2016, Ref.-No.: 10653 Manufacturer: HERMLE Model: C 250 U Year of manufacture: 2016 Control type: CNC Control system: Heidenhain TNC 640 Location: Halberstadt Country of origin: Germany X travel: 600 mm Y travel: 550 mm Z travel: 450 mm C-axis: 360° Table load: 300 kg Number of tool stations in magazine: 30 Tool changer: Automatic chain magazine Spindle speed: 18,000 rpm A-axis: +/- 115° Additional information: - Electronic handwheel (HR handwheel) included - Centralized lubrication system installed - Chip removal system included - Capable of simultaneous 5-axis machining - High-precision gantry design Cedpfszh Hmdox Aqxogw - Advanced 3D and 5-axis programming support - Compact and rigid machine enclosure - Tool stations expandable up to 118 tools - The table can rotate and tilt, while the actual milling tools move along the other axes. - The machine can machine workpieces from five sides in a single setup. Machine can be inspected under power by appointment.

Kondisi: sangat baik (bekas), Rentang pengukuran hingga: 1000 mm Akurasi pengukuran: 1 µm Cgodpfjzibt Iox Aqxsw Tinggi total: 1400 mm Kebutuhan ruang: 330 x 300 mm Berat kira-kira: 30 kg

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 6.010 mm, panjang total: 2.650 mm, · Front track width: 2,500 mm · Width between wheel arms: 1,650 mm · Front overhang: 307 mm · Rear overhang: 208 mm · Loss dimension: 1,180 mm · Maximum approach angle: 45° · Maximum ramp angle: 29° · Maximum departure angle: 45° · Mast tilt forward: 3° · Mast tilt backward: 5° Codpezh Razjfx Aqxegw · Minimum outer turning radius: 2,540 mm · Outer radius: 750 mm · Platform height: 1,250 mm · Maximum speed: 15 km/h · Gradeability: 15% · Standard paint finish: Green and Grey · Suspended seat KAB Model 211 · Rubber-mounted semi-open cab · Multidirectional operation · Hydrostatic all-wheel drive · Load-sensing steering · 4-way wheel positioning · Hydraulic oil cooler